r: 57072558 p: 3.34 pid: 32055 b: PFERD q: 0 st: lt: 8 ean: 4007220117545 sr: PFERD 35613276 sr_no_br: 35613276 sr_no_br_cl: 35613276 sr_cl: PFERD35613276 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Grit size 60 Shank size 3 mm Shape (grinding point) Shallow cone Height 16 mm n: PFERD B 53 3 AR 60 O5V shank shape B 53 6x16 mm shank Ø 3 mm A60 for steel and cast steel - 35613276 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 53 dia. 6x16 mm shank dia. 3 mm A60 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank shape B 53 6x16 mm shank Ø 3 mm A60 for steel and cast steel kpn: B 53 3 AR 60 O5V kpn_dash: kpn_clear: B533AR60O5V bkpn: PFERD B 53 3 AR 60 O5V bkpn_clear: PFERD B533AR60O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35613276 sr_ns: PFERD35613276
r: 57072565 p: 3.34 pid: 32112 b: PFERD q: 0 st: lt: 8 ean: 4007220117637 sr: PFERD 35624270 sr_no_br: 35624270 sr_no_br_cl: 35624270 sr_cl: PFERD35624270 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Grit size 100 Shank size 3 mm Shape (grinding point) Cylinder Height 2 mm n: PFERD B 64 3 AR 100 O5V shank shape B 64 6x2 mm shank Ø 3 mm A100 for steel and cast steel - 35624270 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point shape B 64 dia. 6x2 mm shank dia. 3 mm A100 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series B mounted points are generally used on smaller or more delicate components, such as in tool and mould construction Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank shape B 64 6x2 mm shank Ø 3 mm A100 for steel and cast steel kpn: B 64 3 AR 100 O5V kpn_dash: kpn_clear: B643AR100O5V bkpn: PFERD B 64 3 AR 100 O5V bkpn_clear: PFERD B643AR100O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35624270 sr_ns: PFERD35624270
r: 08079069 p: 3.33 pid: 66190 b: PFERD q: 0 st: lt: 8 ean: 4007220950166 sr: PFERD 42217177 sr_no_br: 42217177 sr_no_br_cl: 42217177 sr_cl: PFERD42217177 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 36 mm Height 60 mm Grit size 36 n: PFERD GSB 362260 Z 36 zirconium grinding sleeve conical Ø 22-36x60 mm, grit 36, for high stock removal on steel - 42217177 cn: SANDING SLEEVE cn2: SANDING SLEEVE cn_clear: SANDINGSLEEVE d: Product description PFERD Zirkon abrasive spiral band GSB conical dia. 22-36x60mm Z36 for high stock removal on steel Characteristics For coarse grinding work with a high stock removal rate and a long tool life GSB = bulk pack of abrasive spiral bands Advantages: The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use. Excellent tool life due to special manufacturing process - even under the most demanding operating conditions. Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality. ds: dsc: kts: zirconium grinding sleeve conical Ø 22-36x60 mm, grit 36, for high stock removal on steel kpn: GSB 362260 Z 36 kpn_dash: kpn_clear: GSB362260Z36 bkpn: PFERD GSB 362260 Z 36 bkpn_clear: PFERD GSB362260Z36 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding sleeve | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding sleeve | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding sleeve sr_no_br_cl_ns: 42217177 sr_ns: PFERD42217177
r: 08079282 p: 3.33 pid: 33668 b: PFERD q: 0 st: lt: 8 ean: 4007220036211 sr: PFERD 44100234 sr_no_br: 44100234 sr_no_br_cl: 44100234 sr_cl: PFERD44100234 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Cylinder with round end Height 14 mm Shank size 2,35 mm n: PFERD 44100234 medium-hard felt polishing pen round roller shape FK WRC Ø 10x14 mm shank dia. 2.35 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points cylindrical shape with radius end FK WRC dia. 10x14 mm shank dia. 2.35 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The cylindrical shape with radius end WRC is mainly used for work on small, concave contours Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen round roller shape FK WRC Ø 10x14 mm shank dia. 2.35 mm kpn: 44100234 kpn_dash: kpn_clear: 44100234 bkpn: PFERD 44100234 bkpn_clear: PFERD 44100234 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44100234 sr_ns: PFERD44100234
r: 08079075 p: 3.33 pid: 64490 b: PFERD q: 0 st: lt: 8 ean: 4007220950289 sr: PFERD 42217181 sr_no_br: 42217181 sr_no_br_cl: 42217181 sr_cl: PFERD42217181 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 36 mm Height 60 mm Grit size 120 n: PFERD GSB 362260 Z120 zirconium grinding sleeve conical Ø 22-36x60 mm, grit 120, for high stock removal on steel - 42217181 cn: SANDING SLEEVE cn2: SANDING SLEEVE cn_clear: SANDINGSLEEVE d: Product description PFERD Zirkon abrasive spiral band GSB conical dia. 22-36x60mm Z120 for high stock removal on steel Characteristics For coarse grinding work with a high stock removal rate and a long tool life GSB = bulk pack of abrasive spiral bands Advantages: The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use. Excellent tool life due to special manufacturing process - even under the most demanding operating conditions. Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality. ds: dsc: kts: zirconium grinding sleeve conical Ø 22-36x60 mm, grit 120, for high stock removal on steel kpn: GSB 362260 Z120 kpn_dash: kpn_clear: GSB362260Z120 bkpn: PFERD GSB 362260 Z120 bkpn_clear: PFERD GSB362260Z120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding sleeve | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding sleeve | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding sleeve sr_no_br_cl_ns: 42217181 sr_ns: PFERD42217181
r: 08079071 p: 3.33 pid: 64332 b: PFERD q: 0 st: lt: 8 ean: 4007220950258 sr: PFERD 42217179 sr_no_br: 42217179 sr_no_br_cl: 42217179 sr_cl: PFERD42217179 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 36 mm Height 60 mm Grit size 60 n: PFERD GSB 362260 Z 60 zirconium grinding sleeve conical Ø 22-36x60 mm, grit 60, for high stock removal on steel - 42217179 cn: SANDING SLEEVE cn2: SANDING SLEEVE cn_clear: SANDINGSLEEVE d: Product description PFERD Zirkon abrasive spiral band GSB conical dia. 22-36x60mm Z60 for high stock removal on steel Characteristics For coarse grinding work with a high stock removal rate and a long tool life GSB = bulk pack of abrasive spiral bands Advantages: The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use. Excellent tool life due to special manufacturing process - even under the most demanding operating conditions. Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality. ds: dsc: kts: zirconium grinding sleeve conical Ø 22-36x60 mm, grit 60, for high stock removal on steel kpn: GSB 362260 Z 60 kpn_dash: kpn_clear: GSB362260Z60 bkpn: PFERD GSB 362260 Z 60 bkpn_clear: PFERD GSB362260Z60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding sleeve | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding sleeve | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding sleeve sr_no_br_cl_ns: 42217179 sr_ns: PFERD42217179
r: 08079285 p: 3.33 pid: 34786 b: PFERD q: 0 st: lt: 8 ean: 4007220036297 sr: PFERD 44100326 sr_no_br: 44100326 sr_no_br_cl: 44100326 sr_cl: PFERD44100326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Angle shape Height 15 mm Shank size 3 mm n: PFERD 44100326 medium-hard felt polishing pen blunt cone Ø 10x15 mm shank dia. 3 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points tapered shape dia. 10x15 mm shank dia. 3 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The tapered shape WKN is mainly used for work on interior angles Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen blunt cone Ø 10x15 mm shank dia. 3 mm kpn: 44100326 kpn_dash: kpn_clear: 44100326 bkpn: PFERD 44100326 bkpn_clear: PFERD 44100326 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44100326 sr_ns: PFERD44100326
r: 08079284 p: 3.33 pid: 33673 b: PFERD q: 0 st: lt: 8 ean: 4007220295298 sr: PFERD 44141014 sr_no_br: 44141014 sr_no_br_cl: 44141014 sr_cl: PFERD44141014 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Cylinder with round end Height 14 mm Shank size 3 mm n: PFERD 44141014 medium-hard felt polishing pen round roller shape FK WRC Ø 10x14 mm shank dia. 3 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points cylindrical shape with radius end FK WRC dia. 10x14 mm shank dia. 3 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The cylindrical shape with radius end WRC is mainly used for work on small, concave contours Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen round roller shape FK WRC Ø 10x14 mm shank dia. 3 mm kpn: 44141014 kpn_dash: kpn_clear: 44141014 bkpn: PFERD 44141014 bkpn_clear: PFERD 44141014 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44141014 sr_ns: PFERD44141014
r: 04023942 p: 3.33 pid: 35733 b: PFERD q: 0 st: lt: 8 ean: 4007220153789 sr: PFERD 44101681 sr_no_br: 44101681 sr_no_br_cl: 44101681 sr_cl: PFERD44101681 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Drop Height 14 mm Shank size 6 mm n: PFERD 44101681 medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 6 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points oval shape FK TRE dia. 10x14 mm shank dia. 6 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The oval shape TRE is mainly used for work on small radii Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 6 mm kpn: 44101681 kpn_dash: kpn_clear: 44101681 bkpn: PFERD 44101681 bkpn_clear: PFERD 44101681 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44101681 sr_ns: PFERD44101681
r: 08079072 p: 3.33 pid: 65753 b: PFERD q: 0 st: lt: 8 ean: 4007220950265 sr: PFERD 42217180 sr_no_br: 42217180 sr_no_br_cl: 42217180 sr_cl: PFERD42217180 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 36 mm Height 60 mm Grit size 80 n: PFERD GSB 362260 Z 80 zirconium grinding sleeve conical Ø 22-36x60 mm, grit 80, for high stock removal on steel - 42217180 cn: SANDING SLEEVE cn2: SANDING SLEEVE cn_clear: SANDINGSLEEVE d: Product description PFERD Zirkon abrasive spiral band GSB conical dia. 22-36x60mm Z80 for high stock removal on steel Characteristics For coarse grinding work with a high stock removal rate and a long tool life GSB = bulk pack of abrasive spiral bands Advantages: The abrasive spiral band is firmly held in place on the rubber drum holder as the holder expands during use. Excellent tool life due to special manufacturing process - even under the most demanding operating conditions. Maximum economic efficiency thanks to particularly high stock removal rate and aggressive abrasive quality. ds: dsc: kts: zirconium grinding sleeve conical Ø 22-36x60 mm, grit 80, for high stock removal on steel kpn: GSB 362260 Z 80 kpn_dash: kpn_clear: GSB362260Z80 bkpn: PFERD GSB 362260 Z 80 bkpn_clear: PFERD GSB362260Z80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding sleeve | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding sleeve | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding sleeve sr_no_br_cl_ns: 42217180 sr_ns: PFERD42217180
r: 08078377 p: 3.33 pid: 65604 b: PFERD q: 0 st: lt: 8 ean: 4007220586099 sr: PFERD 45007204 sr_no_br: 45007204 sr_no_br_cl: 45007204 sr_cl: PFERD45007204 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 450 mm Grit size 40 n: PFERD 45007204 corundum grinding belt BA 50x450 mm A-COOL40 for stainless steel grinding with tube grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 50x450mm A-COOL40 for grinding stainless steel with a pipe belt grinder Characteristics For general grinding work from fine to very fine grinding on materials which do not conduct heat well, e.g. stainless steel (INOX) Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 50x450 mm A-COOL40 for stainless steel grinding with tube grinder kpn: 45007204 kpn_dash: kpn_clear: 45007204 bkpn: PFERD 45007204 bkpn_clear: PFERD 45007204 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45007204 sr_ns: PFERD45007204
r: 08079283 p: 3.33 pid: 35801 b: PFERD q: 0 st: lt: 8 ean: 4007220036273 sr: PFERD 44100280 sr_no_br: 44100280 sr_no_br_cl: 44100280 sr_cl: PFERD44100280 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Drop Height 14 mm Shank size 3 mm n: PFERD 44100280 medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 3 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points oval shape FK TRE dia. 10x14 mm shank dia. 3 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The oval shape TRE is mainly used for work on small radii Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 3 mm kpn: 44100280 kpn_dash: kpn_clear: 44100280 bkpn: PFERD 44100280 bkpn_clear: PFERD 44100280 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44100280 sr_ns: PFERD44100280
r: 08079281 p: 3.33 pid: 33665 b: PFERD q: 0 st: lt: 8 ean: 4007220036266 sr: PFERD 44100278 sr_no_br: 44100278 sr_no_br_cl: 44100278 sr_cl: PFERD44100278 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Drop Height 14 mm Shank size 2,35 mm n: PFERD 44100278 medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 2.35 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points oval shape FK TRE dia. 10x14 mm shank dia. 2.35 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The oval shape TRE is mainly used for work on small radii Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polishing pen drop shape FK TRE Ø 10x14 mm shank dia. 2.35 mm kpn: 44100278 kpn_dash: kpn_clear: 44100278 bkpn: PFERD 44100278 bkpn_clear: PFERD 44100278 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44100278 sr_ns: PFERD44100278
r: 08079286 p: 3.33 pid: 35804 b: PFERD q: 0 st: lt: 8 ean: 4007220036280 sr: PFERD 44100324 sr_no_br: 44100324 sr_no_br_cl: 44100324 sr_cl: PFERD44100324 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (polishing point) Angle shape Height 15 mm Shank size 2,35 mm n: PFERD 44100324 medium-hard felt polish blunt cone Ø 10x15 mm shank dia. 2.35 mm cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD medium-hard felt polishing points tapered shape dia. 10x15 mm shank dia. 2.35 mm Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained The tapered shape WKN is mainly used for work on interior angles Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. ds: dsc: kts: medium-hard felt polish blunt cone Ø 10x15 mm shank dia. 2.35 mm kpn: 44100324 kpn_dash: kpn_clear: 44100324 bkpn: PFERD 44100324 bkpn_clear: PFERD 44100324 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing point sr_no_br_cl_ns: 44100324 sr_ns: PFERD44100324
r: 04024181 p: 3.32 pid: 32619 b: PFERD q: 0 st: lt: 10 ean: 4007220155219 sr: PFERD 44505156 sr_no_br: 44505156 sr_no_br_cl: 44505156 sr_cl: PFERD44505156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 5010/6 A 150 flap brushes corundum 50x10 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44505156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A150 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 5010/6 A 150 kpn_dash: kpn_clear: F50106A150 bkpn: PFERD F 5010/6 A 150 bkpn_clear: PFERD F50106A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505156 sr_ns: PFERD44505156
r: 03208982 p: 3.32 pid: 32556 b: PFERD q: 0 st: lt: 6 ean: 4007220155233 sr: PFERD 44505326 sr_no_br: 44505326 sr_no_br_cl: 44505326 sr_cl: PFERD44505326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 5010/6 A 320 flap brushes corundum 50x10 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 44505326 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A320 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 5010/6 A 320 kpn_dash: kpn_clear: F50106A320 bkpn: PFERD F 5010/6 A 320 bkpn_clear: PFERD F50106A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505326 sr_ns: PFERD44505326
r: 03208971 p: 3.32 pid: 32550 b: PFERD q: 0 st: lt: 8 ean: 4007220155189 sr: PFERD 44505066 sr_no_br: 44505066 sr_no_br_cl: 44505066 sr_cl: PFERD44505066 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 5010/6 A 60 flap brushes corundum 50x10 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing - 44505066 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A60 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing kpn: F 5010/6 A 60 kpn_dash: kpn_clear: F50106A60 bkpn: PFERD F 5010/6 A 60 bkpn_clear: PFERD F50106A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505066 sr_ns: PFERD44505066
r: 03208973 p: 3.32 pid: 33410 b: PFERD q: 0 st: lt: 10 ean: 4007220292846 sr: PFERD 44505186 sr_no_br: 44505186 sr_no_br_cl: 44505186 sr_cl: PFERD44505186 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 180 n: PFERD F 5010/6 A 180 flap brushes corundum 50x10 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing - 44505186 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A180 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing kpn: F 5010/6 A 180 kpn_dash: kpn_clear: F50106A180 bkpn: PFERD F 5010/6 A 180 bkpn_clear: PFERD F50106A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505186 sr_ns: PFERD44505186
r: 57993032 p: 3.32 pid: 32820 b: PFERD q: 0 st: lt: 6 ean: 4007220155226 sr: PFERD 44505246 sr_no_br: 44505246 sr_no_br_cl: 44505246 sr_cl: PFERD44505246 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 240 n: PFERD F 5010/6 A 240 flap brushes corundum 50x10 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing - 44505246 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A240 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing kpn: F 5010/6 A 240 kpn_dash: kpn_clear: F50106A240 bkpn: PFERD F 5010/6 A 240 bkpn_clear: PFERD F50106A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505246 sr_ns: PFERD44505246
r: 57993563 p: 3.32 pid: 33171 b: PFERD q: 0 st: lt: 8 ean: 4007220155196 sr: PFERD 44505086 sr_no_br: 44505086 sr_no_br_cl: 44505086 sr_cl: PFERD44505086 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 5010/6 A 80 flap brushes corundum 50x10 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing - 44505086 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A80 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing kpn: F 5010/6 A 80 kpn_dash: kpn_clear: F50106A80 bkpn: PFERD F 5010/6 A 80 bkpn_clear: PFERD F50106A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505086 sr_ns: PFERD44505086
