r: 57072463 p: 4.11 pid: 33667 b: PFERD q: 0 st: lt: 8 ean: 4007220097199 sr: PFERD 31133033 sr_no_br: 31133033 sr_no_br_cl: 31133033 sr_cl: PFERD31133033 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 40 mm n: PFERD ZY 2040 6 ARN 30 K5V shank cylindrical 20x40 mm shank Ø 6 mm A30 for grey/lamellar and ductile cast iron - 31133033 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST mounted point cylindrical dia. 20x40 mm shank dia. 6 mm A30 for grey and nodular cast iron Characteristics The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds Its applications include cleaning workpieces and grinding out shrinkage holes The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Suitable for use on surfaces and edges. High grinding performance and good tool life. High stock removal rates thanks to coarse grit size. ds: dsc: kts: shank cylindrical 20x40 mm shank Ø 6 mm A30 for grey/lamellar and ductile cast iron kpn: ZY 2040 6 ARN 30 K5V kpn_dash: kpn_clear: ZY20406ARN30K5V bkpn: PFERD ZY 2040 6 ARN 30 K5V bkpn_clear: PFERD ZY20406ARN30K5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31133033 sr_ns: PFERD31133033
r: 04021307 p: 4.11 pid: 33570 b: PFERD q: 0 st: lt: 8 ean: 4007220802953 sr: PFERD 31133231 sr_no_br: 31133231 sr_no_br_cl: 31133231 sr_cl: PFERD31133231 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 40 mm n: PFERD ZY 2040 6 ADR 30 O5V shank cylindrical 20x40 mm shank Ø 6 mm A30 for cast steel - 31133231 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST STEEL mounted point cylindrical dia. 20x40 mm shank dia. 6 mm A30 for cast steel Characteristics The CAST STEEL design is particularly well-suited to rough general work on cast steel It is ideal for removing burrs on cast steel parts and for grinding of intersections after separating risers The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Very high grinding performance and aggressiveness from the start. High stock removal rate in combination with a long tool life. Delivered in practical industrial packaging. ds: dsc: kts: shank cylindrical 20x40 mm shank Ø 6 mm A30 for cast steel kpn: ZY 2040 6 ADR 30 O5V kpn_dash: kpn_clear: ZY20406ADR30O5V bkpn: PFERD ZY 2040 6 ADR 30 O5V bkpn_clear: PFERD ZY20406ADR30O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31133231 sr_ns: PFERD31133231
r: 02648083 p: 4.08 pid: 32907 b: PFERD q: 0 st: lt: 4 ean: 4007220155127 sr: PFERD 44504066 sr_no_br: 44504066 sr_no_br_cl: 44504066 sr_cl: PFERD44504066 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 5020/6 A 60 flap brushes corundum 50x20 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing - 44504066 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A60 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing kpn: F 5020/6 A 60 kpn_dash: kpn_clear: F50206A60 bkpn: PFERD F 5020/6 A 60 bkpn_clear: PFERD F50206A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504066 sr_ns: PFERD44504066
r: 04024173 p: 4.08 pid: 32613 b: PFERD q: 0 st: lt: 5 ean: 4007220155134 sr: PFERD 44504086 sr_no_br: 44504086 sr_no_br_cl: 44504086 sr_cl: PFERD44504086 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 5020/6 A 80 flap brushes corundum 50x20 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing - 44504086 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A80 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing kpn: F 5020/6 A 80 kpn_dash: kpn_clear: F50206A80 bkpn: PFERD F 5020/6 A 80 bkpn_clear: PFERD F50206A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504086 sr_ns: PFERD44504086
r: 57090002 p: 4.08 pid: 32780 b: PFERD q: 0 st: lt: 8 ean: 4007220155318 sr: PFERD 44507086 sr_no_br: 44507086 sr_no_br_cl: 44507086 sr_cl: PFERD44507086 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 6015/6 A 80 flap brushes corundum 60x15 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing - 44507086 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x15 mm shank dia. 6 mm A80 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x15 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing kpn: F 6015/6 A 80 kpn_dash: kpn_clear: F60156A80 bkpn: PFERD F 6015/6 A 80 bkpn_clear: PFERD F60156A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44507086 sr_ns: PFERD44507086
r: 03181269 p: 4.08 pid: 34840 b: PFERD q: 0 st: lt: 8 ean: 4007220155158 sr: PFERD 44504156 sr_no_br: 44504156 sr_no_br_cl: 44504156 sr_cl: PFERD44504156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 5020/6 A 150 flap brushes corundum 50x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44504156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A150 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 5020/6 A 150 kpn_dash: kpn_clear: F50206A150 bkpn: PFERD F 5020/6 A 150 bkpn_clear: PFERD F50206A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504156 sr_ns: PFERD44504156
r: 08077469 p: 4.08 pid: 66008 b: PFERD q: 0 st: lt: 8 ean: 4007220617533 sr: PFERD 64156175 sr_no_br: 64156175 sr_no_br_cl: 64156175 sr_cl: PFERD64156175 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 180 mm (Disc) attachment Bore hole Bore size 22,2 mm Grit size 60 n: PFERD FS 180-22 CO 60 fibre disc with ceramic grit Ø 180 mm, grit 60, for highest efficiency on steel - 64156175 cn: FIBRE DISC cn2: FIBRE DISC cn_clear: FIBREDISC d: Product description PFERD ceramic oxide grain fibre disc dia. 180mm CO60 for maximum stock removal on steel Characteristics PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation ""vulcanized fibre disc"" For aggressive grinding with maximum stock removal rate and very long tool life Consistently high performance due to self-sharpening ceramic oxide grain The ceramic oxide grain is specifically designed for work on hard materials and layers Advantages: High economic efficiency thanks to long tool life and very high stock removal rate. Consistent surface finish thanks to high-quality abrasives. Highly flexible, enabling optimal adjustment to the contour. ds: dsc: kts: fibre disc with ceramic grit Ø 180 mm, grit 60, for highest efficiency on steel kpn: FS 180-22 CO 60 kpn_dash: FS 180 kpn_clear: FS18022CO60 bkpn: PFERD FS 180-22 CO 60 bkpn_clear: PFERD FS18022CO60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Fibre disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd fibre disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Fiber disc sr_no_br_cl_ns: 64156175 sr_ns: PFERD64156175
r: 57990705 p: 4.08 pid: 34307 b: PFERD q: 0 st: lt: 8 ean: 4007220292860 sr: PFERD 44504186 sr_no_br: 44504186 sr_no_br_cl: 44504186 sr_cl: PFERD44504186 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 180 n: PFERD F 5020/6 A 180 flap brushes corundum 50x20 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing - 44504186 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A180 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing kpn: F 5020/6 A 180 kpn_dash: kpn_clear: F50206A180 bkpn: PFERD F 5020/6 A 180 bkpn_clear: PFERD F50206A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504186 sr_ns: PFERD44504186
r: 04024197 p: 4.08 pid: 32628 b: PFERD q: 0 st: lt: 8 ean: 4007220155356 sr: PFERD 44507326 sr_no_br: 44507326 sr_no_br_cl: 44507326 sr_cl: PFERD44507326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 6015/6 A 320 flap brushes corundum 60x15 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 44507326 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x15 mm shank dia. 6 mm A320 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x15 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 6015/6 A 320 kpn_dash: kpn_clear: F60156A320 bkpn: PFERD F 6015/6 A 320 bkpn_clear: PFERD F60156A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44507326 sr_ns: PFERD44507326
r: 57072537 p: 4.08 pid: 32749 b: PFERD q: 0 st: lt: 8 ean: 4007220117248 sr: PFERD 35514273 sr_no_br: 35514273 sr_no_br_cl: 35514273 sr_cl: PFERD35514273 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 17 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder/Pointed cone Height 22 mm n: PFERD A 14 6 AR 30 O5V straight 18x22 mm shank Ø 6 mm A30 for steel and cast steel - 35514273 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point straight dia. 18x22 mm shank dia. 6 mm A30 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours Series A mounted points are generally used on larger components Due to the special shapes, it is possible to grind in a variety of contours The applications range from grinding out slits and grooves in hard-to-reach areas to machining bores and small holes as well as smoothing Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: straight 18x22 mm shank Ø 6 mm A30 for steel and cast steel kpn: A 14 6 AR 30 O5V kpn_dash: kpn_clear: A146AR30O5V bkpn: PFERD A 14 6 AR 30 O5V bkpn_clear: PFERD A146AR30O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 35514273 sr_ns: PFERD35514273
r: 04024174 p: 4.08 pid: 32615 b: PFERD q: 0 st: lt: 8 ean: 4007220155141 sr: PFERD 44504126 sr_no_br: 44504126 sr_no_br_cl: 44504126 sr_cl: PFERD44504126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 5020/6 A 120 flap brushes corundum 50x20 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing - 44504126 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A120 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing kpn: F 5020/6 A 120 kpn_dash: kpn_clear: F50206A120 bkpn: PFERD F 5020/6 A 120 bkpn_clear: PFERD F50206A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504126 sr_ns: PFERD44504126
r: 03209023 p: 4.08 pid: 34039 b: PFERD q: 0 st: lt: 8 ean: 4007220155332 sr: PFERD 44507156 sr_no_br: 44507156 sr_no_br_cl: 44507156 sr_cl: PFERD44507156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 6015/6 A 150 flap brushes corundum 60x15 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44507156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x15 mm shank dia. 6 mm A150 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x15 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 6015/6 A 150 kpn_dash: kpn_clear: F60156A150 bkpn: PFERD F 6015/6 A 150 bkpn_clear: PFERD F60156A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44507156 sr_ns: PFERD44507156
r: 04024177 p: 4.08 pid: 32686 b: PFERD q: 0 st: lt: 8 ean: 4007220155172 sr: PFERD 44504326 sr_no_br: 44504326 sr_no_br_cl: 44504326 sr_cl: PFERD44504326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 20 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 5020/6 A 320 flap brushes corundum 50x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 44504326 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x20 mm shank dia. 6 mm A320 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x20 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 5020/6 A 320 kpn_dash: kpn_clear: F50206A320 bkpn: PFERD F 5020/6 A 320 bkpn_clear: PFERD F50206A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44504326 sr_ns: PFERD44504326
r: 57090024 p: 4.08 pid: 35125 b: PFERD q: 0 st: lt: 8 ean: 4007220155349 sr: PFERD 44507246 sr_no_br: 44507246 sr_no_br_cl: 44507246 sr_cl: PFERD44507246 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 15 mm Connection size (machine) 6 mm Grit size 240 n: PFERD F 6015/6 A 240 flap brushes corundum 60x15 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing - 44507246 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x15 mm shank dia. 6 mm A240 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x15 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing kpn: F 6015/6 A 240 kpn_dash: kpn_clear: F60156A240 bkpn: PFERD F 6015/6 A 240 bkpn_clear: PFERD F60156A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44507246 sr_ns: PFERD44507246
r: 08079554 p: 4.06 pid: 33340 b: PFERD q: 0 st: lt: 8 ean: 4007220898635 sr: PFERD 31328846 sr_no_br: 31328846 sr_no_br_cl: 31328846 sr_cl: PFERD31328846 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 40 mm Shape (grinding point) Cylinder Height 10 mm Shank size 6 mm Grit size 46 n: PFERD ZY 4010 6 AWCO 46 J5V shank cylindrical 40x13 mm shank Ø 6 mm CO46 for materials that are difficult to machine - 31328846 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD TOUGH mounted point cylindrical dia. 40x13 mm shank dia. 6 mm CO46 for materials that are difficult to machine Characteristics The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance, as well as regrinding of repair welds in tool and mould-making The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Cool grinding as the grain mix is easy to break down. High stock removal rates and very good tool life. Constant stock removal rates thanks to the self-sharpening qualities of the ceramic oxide grain. ds: dsc: kts: shank cylindrical 40x13 mm shank Ø 6 mm CO46 for materials that are difficult to machine kpn: ZY 4010 6 AWCO 46 J5V kpn_dash: kpn_clear: ZY40106AWCO46J5V bkpn: PFERD ZY 4010 6 AWCO 46 J5V bkpn_clear: PFERD ZY40106AWCO46J5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31328846 sr_ns: PFERD31328846
r: 02800639 p: 4.06 pid: 34609 b: PFERD q: 0 st: lt: 8 ean: 4007220898642 sr: PFERD 31328860 sr_no_br: 31328860 sr_no_br_cl: 31328860 sr_cl: PFERD31328860 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 40 mm Shape (grinding point) Cylinder Height 10 mm Shank size 6 mm Grit size 60 n: PFERD ZY 4010 6 AWCO 60 J5V shank cylindrical 40x13 mm shank Ø 6 mm CO60 for materials that are difficult to machine - 31328860 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD TOUGH mounted point cylindrical dia. 40x13 mm shank dia. 6 mm CO60 for materials that are difficult to machine Characteristics The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits Its applications include weld dressing on repair welds and reworking on turbine blades during aircraft maintenance, as well as regrinding of repair welds in tool and mould-making The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Cool grinding as the grain mix is easy to break down. High stock removal rates and very good tool life. Constant stock removal rates thanks to the self-sharpening qualities of the ceramic oxide grain. ds: dsc: kts: shank cylindrical 40x13 mm shank Ø 6 mm CO60 for materials that are difficult to machine kpn: ZY 4010 6 AWCO 60 J5V kpn_dash: kpn_clear: ZY40106AWCO60J5V bkpn: PFERD ZY 4010 6 AWCO 60 J5V bkpn_clear: PFERD ZY40106AWCO60J5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31328860 sr_ns: PFERD31328860
r: 57070238 p: 4.05 pid: 34944 b: PFERD q: 0 st: lt: 8 ean: 4007220098059 sr: PFERD 31146274 sr_no_br: 31146274 sr_no_br_cl: 31146274 sr_cl: PFERD31146274 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 13 mm Grit size 46 Shank size 6 mm Shape (grinding point) Cylinder Height 40 mm n: PFERD ZY 1340 6 AR 46 O5V shank cylindrical 13x40 mm shank Ø 6 mm A46 for steel and cast steel - 31146274 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point cylindrical dia. 13x40 mm shank dia. 6 mm A46 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank cylindrical 13x40 mm shank Ø 6 mm A46 for steel and cast steel kpn: ZY 1340 6 AR 46 O5V kpn_dash: kpn_clear: ZY13406AR46O5V bkpn: PFERD ZY 1340 6 AR 46 O5V bkpn_clear: PFERD ZY13406AR46O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31146274 sr_ns: PFERD31146274
