r: 08079370 p: 4.33 pid: 33777 b: PFERD q: 0 st: lt: 8 ean: 4007220146286 sr: PFERD 41434212 sr_no_br: 41434212 sr_no_br_cl: 41434212 sr_cl: PFERD41434212 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 15 mm Grit size 120 Shank size 6 mm Shape (grinding point) Sphere n: PFERD PF KU 15/6 AW 120 LR Poliflex grinding point ball shape 15 mm shank Ø 6 mm binding LR A120 - 41434212 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point ball shape dia. 15 mm shank dia. 6 mm bond LR A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the LR bond are manufactured with white aluminium oxide The LR bond is a hard, sturdy bond Suitable for use on surfaces Mounted grinding wheel in ball shape for fine grinding inner radii, contours and transitions Advantages: Produces a fine, shiny surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding point ball shape 15 mm shank Ø 6 mm binding LR A120 kpn: PF KU 15/6 AW 120 LR kpn_dash: kpn_clear: PFKU156AW120LR bkpn: PFERD PF KU 15/6 AW 120 LR bkpn_clear: PFERD PFKU156AW120LR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41434212 sr_ns: PFERD41434212
r: 08079265 p: 4.33 pid: 34771 b: PFERD q: 0 st: lt: 8 ean: 4007220146231 sr: PFERD 41407112 sr_no_br: 41407112 sr_no_br_cl: 41407112 sr_cl: PFERD41407112 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size 120 Shank size 3 mm Shape (grinding point) Sphere n: PFERD PF KU 10/3 AR 120 GR Poliflex grinding point ball shape 10 mm shank Ø 3 mm binding GR A120 - 41407112 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point ball shape dia. 10 mm shank dia. 3 mm bond GR A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the GR bond are manufactured with pink aluminium oxide The GR bond is a soft elastomer-based bond Suitable for use on surfaces Mounted grinding wheel in ball shape for fine grinding inner radii, contours and transitions Advantages: Produces a fine, shiny surface finish. Soft grinding thanks to soft, elastic bond. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding point ball shape 10 mm shank Ø 3 mm binding GR A120 kpn: PF KU 10/3 AR 120 GR kpn_dash: kpn_clear: PFKU103AR120GR bkpn: PFERD PF KU 10/3 AR 120 GR bkpn_clear: PFERD PFKU103AR120GR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41407112 sr_ns: PFERD41407112
r: 08079671 p: 4.33 pid: 34860 b: PFERD q: 0 st: lt: 8 ean: 4007220146224 sr: PFERD 41401212 sr_no_br: 41401212 sr_no_br_cl: 41401212 sr_cl: PFERD41401212 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Grit size 120 Shank size 3 mm Shape (grinding point) Sphere n: PFERD PF KU 08/3 AW 120 LR Poliflex grinding point ball shape 8 mm shank Ø 3 mm binding LR A120 - 41401212 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point ball shape dia. 8 mm shank dia. 3 mm bond LR A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the LR bond are manufactured with white aluminium oxide The LR bond is a hard, sturdy bond Suitable for use on surfaces Mounted grinding wheel in ball shape for fine grinding inner radii, contours and transitions Advantages: Produces a fine, shiny surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding point ball shape 8 mm shank Ø 3 mm binding LR A120 kpn: PF KU 08/3 AW 120 LR kpn_dash: kpn_clear: PFKU083AW120LR bkpn: PFERD PF KU 08/3 AW 120 LR bkpn_clear: PFERD PFKU083AW120LR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41401212 sr_ns: PFERD41401212
r: 08079670 p: 4.33 pid: 33818 b: PFERD q: 0 st: lt: 8 ean: 4007220146217 sr: PFERD 41401112 sr_no_br: 41401112 sr_no_br_cl: 41401112 sr_cl: PFERD41401112 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Grit size 120 Shank size 3 mm Shape (grinding point) Sphere n: PFERD PF KU 08/3 AR 120 GR Poliflex grinding point ball shape 8 mm shank Ø 3 mm binding GR A120 - 41401112 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point ball shape dia. 8 mm shank dia. 3 mm bond GR A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the GR bond are manufactured with pink aluminium oxide The GR bond is a soft elastomer-based bond Suitable for use on surfaces Mounted grinding wheel in ball shape for fine grinding inner radii, contours and transitions Advantages: Produces a fine, shiny surface finish. Soft grinding thanks to soft, elastic bond. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding point ball shape 8 mm shank Ø 3 mm binding GR A120 kpn: PF KU 08/3 AR 120 GR kpn_dash: kpn_clear: PFKU083AR120GR bkpn: PFERD PF KU 08/3 AR 120 GR bkpn_clear: PFERD PFKU083AR120GR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41401112 sr_ns: PFERD41401112
r: 08079369 p: 4.33 pid: 35879 b: PFERD q: 0 st: lt: 8 ean: 4007220146279 sr: PFERD 41434112 sr_no_br: 41434112 sr_no_br_cl: 41434112 sr_cl: PFERD41434112 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 15 mm Grit size 120 Shank size 6 mm Shape (grinding point) Sphere n: PFERD PF KU 15/6 AR 120 GR Poliflex grinding point ball shape 15 mm shank Ø 6 mm binding GR A120 - 41434112 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point ball shape dia. 15 mm shank dia. 6 mm bond GR A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the GR bond are manufactured with pink aluminium oxide The GR bond is a soft elastomer-based bond Suitable for use on surfaces Mounted grinding wheel in ball shape for fine grinding inner radii, contours and transitions Advantages: Produces a fine, shiny surface finish. Soft grinding thanks to soft, elastic bond. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding point ball shape 15 mm shank Ø 6 mm binding GR A120 kpn: PF KU 15/6 AR 120 GR kpn_dash: kpn_clear: PFKU156AR120GR bkpn: PFERD PF KU 15/6 AR 120 GR bkpn_clear: PFERD PFKU156AR120GR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41434112 sr_ns: PFERD41434112
r: 57072492 p: 4.31 pid: 32730 b: PFERD q: 0 st: lt: 8 ean: 4007220102725 sr: PFERD 32208503 sr_no_br: 32208503 sr_no_br_cl: 32208503 sr_cl: PFERD32208503 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Grit size 30 Shank size 6 mm Shape (grinding point) Rounded cone Height 32 mm n: PFERD KE 2032 6 CU 30 R5V pin stone cone shape 20x32 mm pin-Ø 6 mm SIC30 for grey/lamellar and ductile cast iron - 32208503 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST EDGE mounted point conical dia. 20x32 mm shank dia. 6 mm SIC30 for grey and nodular cast iron Characteristics The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers The CAST EDGE type is particularly well-suited to edge grinding and for grinding away sand contamination and metal contamination on grey and nodular cast iron in conjunction with high cutting speeds Its main applications include removal of sharp burrs and grinding out sand contamination and metal contamination on cast material parts Advantages: Highly dimensionally stable due to the high bond content. Economical to use due to the high edge stability even on low-speed tool drives. ds: dsc: kts: pin stone cone shape 20x32 mm pin-Ø 6 mm SIC30 for grey/lamellar and ductile cast iron kpn: KE 2032 6 CU 30 R5V kpn_dash: kpn_clear: KE20326CU30R5V bkpn: PFERD KE 2032 6 CU 30 R5V bkpn_clear: PFERD KE20326CU30R5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32208503 sr_ns: PFERD32208503
r: 03208872 p: 4.31 pid: 32508 b: PFERD q: 0 st: lt: 8 ean: 4007220951132 sr: PFERD 44419326 sr_no_br: 44419326 sr_no_br_cl: 44419326 sr_cl: PFERD44419326 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 320 n: PFERD F 6005/6 A 320 flap brushes corundum 60x5 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing - 44419326 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A320 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, 320 grit for fine grinding & finishing kpn: F 6005/6 A 320 kpn_dash: kpn_clear: F60056A320 bkpn: PFERD F 6005/6 A 320 bkpn_clear: PFERD F60056A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419326 sr_ns: PFERD44419326
r: 03208869 p: 4.31 pid: 34906 b: PFERD q: 0 st: lt: 8 ean: 4007220951118 sr: PFERD 44419186 sr_no_br: 44419186 sr_no_br_cl: 44419186 sr_cl: PFERD44419186 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 180 n: PFERD F 6005/6 A 180 flap brushes corundum 60x5 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing - 44419186 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A180 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing kpn: F 6005/6 A 180 kpn_dash: kpn_clear: F60056A180 bkpn: PFERD F 6005/6 A 180 bkpn_clear: PFERD F60056A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419186 sr_ns: PFERD44419186
r: 03208867 p: 4.31 pid: 32456 b: PFERD q: 0 st: lt: 8 ean: 4007220951101 sr: PFERD 44419156 sr_no_br: 44419156 sr_no_br_cl: 44419156 sr_cl: PFERD44419156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 6005/6 A 150 flap brushes corundum 60x5 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44419156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A150 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 6005/6 A 150 kpn_dash: kpn_clear: F60056A150 bkpn: PFERD F 6005/6 A 150 bkpn_clear: PFERD F60056A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419156 sr_ns: PFERD44419156
r: 04021635 p: 4.31 pid: 33191 b: PFERD q: 0 st: lt: 8 ean: 4007220102688 sr: PFERD 32208273 sr_no_br: 32208273 sr_no_br_cl: 32208273 sr_cl: PFERD32208273 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Grit size 30 Shank size 6 mm Shape (grinding point) Rounded cone Height 32 mm n: PFERD KE 2032 6 AR 30 O5V Stake cone shape 20x32 mm shank Ø 6 mm A30 for steel and cast steel - 32208273 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point conical dia. 20x32 mm shank dia. 6 mm A30 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours The conical shape KE is designed for a comfortable working position when smoothing out a ridge on a surface Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: Stake cone shape 20x32 mm shank Ø 6 mm A30 for steel and cast steel kpn: KE 2032 6 AR 30 O5V kpn_dash: kpn_clear: KE20326AR30O5V bkpn: PFERD KE 2032 6 AR 30 O5V bkpn_clear: PFERD KE20326AR30O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32208273 sr_ns: PFERD32208273
r: 57072413 p: 4.31 pid: 32676 b: PFERD q: 0 st: lt: 8 ean: 4007220097533 sr: PFERD 31135743 sr_no_br: 31135743 sr_no_br_cl: 31135743 sr_cl: PFERD31135743 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 32 mm n: PFERD ZY 2532 6 ADW 30 L6B set screw cylinder 25x32 mm pin Ø 6 mm A30 for stainless steel - 31135743 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD INOX mounted point cylindrical dia. 25x32 mm shank dia. 6 mm A30 for stainless steel Characteristics The INOX design is specifically intended for surface work on stainless steel (INOX) and for general use on non-ferrous metals and bronze These tools are used for rough grinding of stainless steel (INOX) castings and grinding of moulded parts made of high-temperature-resistant alloys The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Due to cool grinding, particularly suitable for use on temperature-sensitive materials. High level of grinding comfort due to low-vibration grinding. ds: dsc: kts: set screw cylinder 25x32 mm pin Ø 6 mm A30 for stainless steel kpn: ZY 2532 6 ADW 30 L6B kpn_dash: kpn_clear: ZY25326ADW30L6B bkpn: PFERD ZY 2532 6 ADW 30 L6B bkpn_clear: PFERD ZY25326ADW30L6B c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31135743 sr_ns: PFERD31135743
r: 57072438 p: 4.31 pid: 33651 b: PFERD q: 0 st: lt: 8 ean: 4007220097526 sr: PFERD 31135613 sr_no_br: 31135613 sr_no_br_cl: 31135613 sr_cl: PFERD31135613 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 32 mm n: PFERD ZY 2532 6 AN 30 N5B set screw cylinder 25x32 mm pin Ø 6 mm A30 for stainless steel - 31135613 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD INOX EDGE mounted point cylindrical dia. 25x32 mm shank dia. 6 mm A30 for stainless steel Characteristics The INOX EDGE design is particularly well-suited to edge grinding on stainless steel (INOX) Its applications include weld dressing on fillet welds on stainless steel components, removing burrs on moulded parts made of high-temperature-resistant alloys, removing burrs on stainless steel castings and grinding chamfers in preparation for welding stainless steel profiles The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Due to cool grinding, particularly suitable for use on temperature-sensitive materials. High level of grinding comfort due to low-vibration grinding. Economical to use due to the high edge stability even on low-speed tool drives. High dimensional stability on edges. ds: dsc: kts: set screw cylinder 25x32 mm pin Ø 6 mm A30 for stainless steel kpn: ZY 2532 6 AN 30 N5B kpn_dash: kpn_clear: ZY25326AN30N5B bkpn: PFERD ZY 2532 6 AN 30 N5B bkpn_clear: PFERD ZY25326AN30N5B c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31135613 sr_ns: PFERD31135613
r: 03208871 p: 4.31 pid: 32503 b: PFERD q: 0 st: lt: 8 ean: 4007220951125 sr: PFERD 44419246 sr_no_br: 44419246 sr_no_br_cl: 44419246 sr_cl: PFERD44419246 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 240 n: PFERD F 6005/6 A 240 flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing - 44419246 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A240 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 240 for fine grinding & finishing kpn: F 6005/6 A 240 kpn_dash: kpn_clear: F60056A240 bkpn: PFERD F 6005/6 A 240 bkpn_clear: PFERD F60056A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419246 sr_ns: PFERD44419246
r: 03208866 p: 4.31 pid: 32497 b: PFERD q: 0 st: lt: 8 ean: 4007220951095 sr: PFERD 44419126 sr_no_br: 44419126 sr_no_br_cl: 44419126 sr_cl: PFERD44419126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 6005/6 A 120 flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing - 44419126 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A120 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing kpn: F 6005/6 A 120 kpn_dash: kpn_clear: F60056A120 bkpn: PFERD F 6005/6 A 120 bkpn_clear: PFERD F60056A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419126 sr_ns: PFERD44419126
r: 57072165 p: 4.31 pid: 31943 b: PFERD q: 0 st: lt: 8 ean: 4007220102671 sr: PFERD 32208253 sr_no_br: 32208253 sr_no_br_cl: 32208253 sr_cl: PFERD32208253 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 20 mm Grit size 30 Shank size 6 mm Shape (grinding point) Rounded cone Height 32 mm n: PFERD KE 2032 6 ADW 30 M5V Stake cone shape 20x32 mm shank Ø 6 mm A30 for steel and cast steel - 32208253 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point conical dia. 20x32 mm shank dia. 6 mm A30 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: Stake cone shape 20x32 mm shank Ø 6 mm A30 for steel and cast steel kpn: KE 2032 6 ADW 30 M5V kpn_dash: kpn_clear: KE20326ADW30M5V bkpn: PFERD KE 2032 6 ADW 30 M5V bkpn_clear: PFERD KE20326ADW30M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32208253 sr_ns: PFERD32208253
r: 03208860 p: 4.31 pid: 32489 b: PFERD q: 0 st: lt: 8 ean: 4007220951071 sr: PFERD 44419066 sr_no_br: 44419066 sr_no_br_cl: 44419066 sr_cl: PFERD44419066 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 6005/6 A 60 flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing - 44419066 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A60 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, grain 60 for fine grinding & finishing kpn: F 6005/6 A 60 kpn_dash: kpn_clear: F60056A60 bkpn: PFERD F 6005/6 A 60 bkpn_clear: PFERD F60056A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419066 sr_ns: PFERD44419066
r: 57072470 p: 4.31 pid: 32020 b: PFERD q: 0 st: lt: 8 ean: 4007220100165 sr: PFERD 31331033 sr_no_br: 31331033 sr_no_br_cl: 31331033 sr_cl: PFERD31331033 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 13 mm n: PFERD ZY 5013 6 ARN 30 K5V shank cylindrical 50x13 mm shank Ø 6 mm A30 for grey/lamellar and ductile cast iron - 31331033 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST mounted point cylindrical dia. 50x13 mm shank dia. 6 mm A30 for grey and nodular cast iron Characteristics The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds Its applications include cleaning workpieces and grinding out shrinkage holes The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Suitable for use on surfaces and edges. High grinding performance and good tool life. High stock removal rates thanks to coarse grit size. ds: dsc: kts: shank cylindrical 50x13 mm shank Ø 6 mm A30 for grey/lamellar and ductile cast iron kpn: ZY 5013 6 ARN 30 K5V kpn_dash: kpn_clear: ZY50136ARN30K5V bkpn: PFERD ZY 5013 6 ARN 30 K5V bkpn_clear: PFERD ZY50136ARN30K5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31331033 sr_ns: PFERD31331033
r: 57072131 p: 4.31 pid: 31890 b: PFERD q: 0 st: lt: 8 ean: 4007220100189 sr: PFERD 31331253 sr_no_br: 31331253 sr_no_br_cl: 31331253 sr_cl: PFERD31331253 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Grit size 30 Shank size 6 mm Shape (grinding point) Cylinder Height 13 mm n: PFERD ZY 5013 6 ADW 30 M5V shank cylindrical 50x13 mm shank Ø 6 mm A30 for steel and cast steel - 31331253 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point cylindrical dia. 50x13 mm shank dia. 6 mm A30 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: shank cylindrical 50x13 mm shank Ø 6 mm A30 for steel and cast steel kpn: ZY 5013 6 ADW 30 M5V kpn_dash: kpn_clear: ZY50136ADW30M5V bkpn: PFERD ZY 5013 6 ADW 30 M5V bkpn_clear: PFERD ZY50136ADW30M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31331253 sr_ns: PFERD31331253
r: 03208865 p: 4.31 pid: 32450 b: PFERD q: 0 st: lt: 8 ean: 4007220951088 sr: PFERD 44419086 sr_no_br: 44419086 sr_no_br_cl: 44419086 sr_cl: PFERD44419086 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 6005/6 A 80 flap brushes corundum 60x5 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing - 44419086 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 60x5 mm shank dia. 6 mm A80 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 60x5 mm, shank dia. 6 mm, grit 80 for fine grinding & finishing kpn: F 6005/6 A 80 kpn_dash: kpn_clear: F60056A80 bkpn: PFERD F 6005/6 A 80 bkpn_clear: PFERD F60056A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44419086 sr_ns: PFERD44419086
r: 57990067 p: 4.31 pid: 64354 b: PFERD q: 0 st: lt: 15 ean: 4007220294130 sr: PFERD 44271004 sr_no_br: 44271004 sr_no_br_cl: 44271004 sr_cl: PFERD44271004 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 100 mm Width 10 mm Connection type (machine) Shank n: PFERD 44271004 rag wheel TR hard 100x10mm bore 10mm for pre-polishing with polishing paste cn: POLISHING WHEEL cn2: POLISHING WHEEL cn_clear: POLISHINGWHEEL d: Product description PFERD cloth ring TR hard dia. 100x10mm centre hole dia. 10mm for pre-polishing with polishing paste Characteristics Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes If the intention is to achieve very smooth surface finishes, use several or even all variants successively TH (hard cloth) version for pre-polishing Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. ds: dsc: kts: rag wheel TR hard 100x10mm bore 10mm for pre-polishing with polishing paste kpn: 44271004 kpn_dash: kpn_clear: 44271004 bkpn: PFERD 44271004 bkpn_clear: PFERD 44271004 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Polishing wheel sr_no_br_cl_ns: 44271004 sr_ns: PFERD44271004
