r: 03238282 p: 114.35 pid: 121002 b: PFERD q: 0 st: lt: 8 ean: 4007220226674 sr: PFERD 21901306 sr_no_br: 21901306 sr_no_br_cl: 21901306 sr_cl: PFERD21901306 sr_dash: sold: 114.35 p_range: none type: standard act: 1 avo: 1 av: Milling type Rotary burr Shank size (milling cutter) 6 mm n: PFERD 21901306 small tungsten carbide high-efficiency burr set MICRO burr Ø 6 mm fine machining 3-piece cn: MILLING CUTTER SET cn2: MILLING CUTTER SET cn_clear: MILLINGCUTTERSET d: Product description PFERD Tungsten carbide small high-performance burr set 1306 MICRO 3-piece dia. 6 mm shank dia. 6 mm finishing Characteristics Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces They also operate with low vibration and little noise They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications Almost all materials up to a hardness of 68 HRC can be machined The 1306 MICRO set contains three tungsten carbide burrs for finishing work in the most common shapes and dimensions The sturdy plastic box protects the tools from dirt and damage Advantages: High surface quality. Unlike with mounted grinding points, there is no change in geometry due to wear and tear. Use on almost all materials up to 68 HRC. The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear. ds: dsc: kts: small tungsten carbide high-efficiency burr set MICRO burr Ø 6 mm fine machining 3-piece kpn: 21901306 kpn_dash: kpn_clear: 21901306 bkpn: PFERD 21901306 bkpn_clear: PFERD 21901306 c_path: Home / Tools / Machining tools / Sets and kits / Milling / Milling cutter set | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd sets and kits / Pferd milling / Pferd milling cutter set sr_no_br_cl_ns: 21901306 sr_ns: PFERD21901306
r: 02945297 p: 5.68 pid: 68850 b: PFERD q: 28 st: 1 lt: 1 ean: 4007220104781 sr: PFERD 43104009 sr_no_br: 43104009 sr_no_br_cl: 43104009 sr_cl: PFERD43104009 sr_dash: sold: 113.6 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 6010/6 ST 0,20 round brush unturned RBU Ø 60 x 10 mm pin-Ø 6 mm steel wire-Ø 0.20 - 43104009 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 60x10 mm shank dia. 6 mm steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 60 x 10 mm pin-Ø 6 mm steel wire-Ø 0.20 kpn: 6010/6 ST 0,20 kpn_dash: kpn_clear: 60106ST020 bkpn: PFERD 6010/6 ST 0,20 bkpn_clear: PFERD 60106ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43104009 sr_ns: PFERD43104009
r: 04025721 p: 2.26 pid: 67635 b: PFERD q: 32 st: 1 lt: 1 ean: 4007220165638 sr: PFERD 65503020 sr_no_br: 65503020 sr_no_br_cl: 65503020 sr_cl: PFERD65503020 sr_dash: sold: 113 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 30 mm Connection size (disc) 6 mm Connection type (disc) Bore For material Ferrous metal; Non-ferrous metal; Steel; Stainless steel Shape (cutting disc) Flat Thickness 1,4 mm n: PFERD 65503020 small cut-off wheel EHT 30x1,4x6 mm straight performance line SG STEELOX for steel/stainless steel cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description PFERD Small cut-off wheel EHT 30x1.4x6 mm flat Performance Line SG STEELOX for steel/stainless steel Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency PFERD offers small cut-off wheels for straight grinders in various dimensions The general-purpose cut-off wheels are suited to cutting steel, stainless steel (INOX), cast iron, aluminium and other materials General-purpose cut-off wheel for use on straight grinders with high cutting performance and maximum tool life Advantages: Ideal for hard-to-reach areas. General-purpose cut-off wheel for many different materials. Fast work progress thanks to good cutting performance. Maximum economic efficiency due to maximum tool life. ds: dsc: kts: small cut-off wheel EHT 30x1,4x6 mm straight performance line SG STEELOX for steel/stainless steel kpn: 65503020 kpn_dash: kpn_clear: 65503020 bkpn: PFERD 65503020 bkpn_clear: PFERD 65503020 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd cutting disc sr_no_br_cl_ns: 65503020 sr_ns: PFERD65503020
r: 41980289 p: 112.09 pid: 35169 b: PFERD q: 0 st: lt: 8 ean: 4007220153635 sr: PFERD 43506001 sr_no_br: 43506001 sr_no_br_cl: 43506001 sr_cl: PFERD43506001 sr_dash: sold: 112.09 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 38 mm Max. no-load speed 4500 rpm Connection size (machine) 31,8 mm n: PFERD 20038/AK32-2 ST 0,30 round brush wide untied RBU Ø 200 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding cup - 43506001 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 200x38xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed specially for industrial use Advantages: High economic efficiency due to very long tool life. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 200 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding cup kpn: 20038/AK32-2 ST 0,30 kpn_dash: 20038/AK32 kpn_clear: 20038AK322ST030 bkpn: PFERD 20038/AK32-2 ST 0,30 bkpn_clear: PFERD 20038AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506001 sr_ns: PFERD43506001
r: 57031368 p: 1.12 pid: 64701 b: PFERD q: 0 st: lt: 8 ean: 4007220152393 sr: PFERD 42811208 sr_no_br: 42811208 sr_no_br_cl: 42811208 sr_cl: PFERD42811208 sr_dash: sold: 112 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm For material Titanium Height 25 mm Grit size 80 n: PFERD PR 1225 A 80 POLIROLL cylindrical grinding roller Ø 12x25 mm bore Ø 3 mm corundum A80 - 42811208 cn: GRINDING ROLL cn2: GRINDING ROLL cn_clear: GRINDINGROLL d: Product description PFERD POLIROLL PR cylindrical cartridge rolls dia. 12x25 mm hole dia. 3 mm aluminium oxide A80 Characteristics For general grinding work on metals and other materials POLIROLL cartridge rolls consist of spirally wound, coated abrasives The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance Advantages: Consistently high grinding performance throughout its entire tool life thanks to ongoing exposure of fresh abrasive grain during application. Secure fit when in use due to self-tensioning provided by grooved, conical arbor. Easy tool change. ds: dsc: kts: POLIROLL cylindrical grinding roller Ø 12x25 mm bore Ø 3 mm corundum A80 kpn: PR 1225 A 80 kpn_dash: kpn_clear: PR1225A80 bkpn: PFERD PR 1225 A 80 bkpn_clear: PFERD PR1225A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding roll | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding roll | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding roller sr_no_br_cl_ns: 42811208 sr_ns: PFERD42811208
r: 51183705 p: 37.27 pid: 120452 b: PFERD q: 0 st: lt: 8 ean: 4007220045640 sr: PFERD 21101856 sr_no_br: 21101856 sr_no_br_cl: 21101856 sr_cl: PFERD21101856 sr_dash: sold: 111.81 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Shape (burr cutter) Cylindrical (A) Cutting length 13 mm Shank type Cylindrical Shank size (milling cutter) 6 mm n: PFERD ZYA 1013/6 Z5 carbide burr cylinder 10x13mm 6mm universal fine - 21101856 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr cylindrical ZYA dia. 10x13 mm shank dia. 6 mm Z5 universal fine Characteristics Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys It achieves a good surface Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Cylindrical burr according to DIN 8032 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: carbide burr cylinder 10x13mm 6mm universal fine kpn: ZYA 1013/6 Z5 kpn_dash: kpn_clear: ZYA10136Z5 bkpn: PFERD ZYA 1013/6 Z5 bkpn_clear: PFERD ZYA10136Z5 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21101856 sr_ns: PFERD21101856
r: 51183636 p: 15.96 pid: 122234 b: PFERD q: 0 st: lt: 3 ean: 4007220049570 sr: PFERD 21202553 sr_no_br: 21202553 sr_no_br_cl: 21202553 sr_cl: PFERD21202553 sr_dash: sold: 111.72 p_range: none type: standard act: 1 avo: 1 av: Diameter 3 mm Shank size (milling cutter) 3 mm Shank type Cylindrical Shape (burr cutter) Flame (H) Cutting length 7 mm n: PFERD B 0307/3 Z5 tungsten carbide burr flame shape B 3x7mm 3mm universal fine - 21202553 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr flame B dia. 03x07 mm shank dia. 3 mm Z5 universal fine Characteristics Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys It achieves a good surface Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: tungsten carbide burr flame shape B 3x7mm 3mm universal fine kpn: B 0307/3 Z5 kpn_dash: kpn_clear: B03073Z5 bkpn: PFERD B 0307/3 Z5 bkpn_clear: PFERD B03073Z5 c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21202553 sr_ns: PFERD21202553
r: 08078049 p: 110.85 pid: 35619 b: PFERD q: 0 st: lt: 8 ean: 4007220956489 sr: PFERD 43701236 sr_no_br: 43701236 sr_no_br_cl: 43701236 sr_cl: PFERD43701236 sr_dash: sold: 110.85 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 INOX 0,20 round brush wide untied RBU Ø 180 x 25 mm variable arbor hole stainless steel wire-Ø 0.20 grinding cup - 43701236 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 180x25xvariable hole stainless steel wire dia. 0.20 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 180 x 25 mm variable arbor hole stainless steel wire-Ø 0.20 grinding cup kpn: 18025/AK32-2 INOX 0,20 kpn_dash: 18025/AK32 kpn_clear: 18025AK322INOX020 bkpn: PFERD 18025/AK32-2 INOX 0,20 bkpn_clear: PFERD 18025AK322INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701236 sr_ns: PFERD43701236
r: 08079573 p: 3.69 pid: 36015 b: PFERD q: 0 st: lt: 8 ean: 4007220533734 sr: PFERD 41200540 sr_no_br: 41200540 sr_no_br_cl: 41200540 sr_cl: PFERD41200540 sr_dash: sold: 110.7 p_range: none type: standard act: 1 avo: 1 av: Diameter 4 mm Grit size 400 Shank size 3 mm Shape (grinding point) Cylinder Height 8 mm n: PFERD PF ZY 0408/3 AW 400 GHR Poliflex grinding pin cylindrical shape 4x8 mm shank Ø 3 mm bond GR hard A400 - 41200540 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD Poliflex grinding point cylindrical shape dia. 4x8 mm shank dia. 3 mm bond GR hard A400 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the GHR bond are manufactured with an abrasive grain mixture comprising aluminium oxide and silicon carbide (SiC) The GHR bond is a soft and sturdy elastomer-based bond Mounted grinding wheel in cylindrical shape, for fine grinding of small surfaces Advantages: Produces a fine, shiny surface finish. Soft grinding with a longer tool life. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex grinding pin cylindrical shape 4x8 mm shank Ø 3 mm bond GR hard A400 kpn: PF ZY 0408/3 AW 400 GHR kpn_dash: kpn_clear: PFZY04083AW400GHR bkpn: PFERD PF ZY 0408/3 AW 400 GHR bkpn_clear: PFERD PFZY04083AW400GHR c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 41200540 sr_ns: PFERD41200540
r: 41995470 p: 110.68 pid: 36155 b: PFERD q: 0 st: lt: 6 ean: 4007220658772 sr: PFERD 43506601 sr_no_br: 43506601 sr_no_br_cl: 43506601 sr_cl: PFERD43506601 sr_dash: sold: 110.68 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 30 mm Max. no-load speed 3600 rpm Connection size (machine) 31,8 mm n: PFERD 25030/AK32-2 ST 0,30 round brush wide untied RBU Ø 250 x 30 mm variable arbor hole steel wire-Ø 0.30 grinding cup - 43506601 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 250x30xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed specially for industrial use Advantages: High economic efficiency due to very long tool life. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 250 x 30 mm variable arbor hole steel wire-Ø 0.30 grinding cup kpn: 25030/AK32-2 ST 0,30 kpn_dash: 25030/AK32 kpn_clear: 25030AK322ST030 bkpn: PFERD 25030/AK32-2 ST 0,30 bkpn_clear: PFERD 25030AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506601 sr_ns: PFERD43506601
r: 02964910 p: 5.53 pid: 67187 b: PFERD q: 0 st: lt: 5 ean: 4007220113653 sr: PFERD 67668126 sr_no_br: 67668126 sr_no_br_cl: 67668126 sr_cl: PFERD67668126 sr_dash: sold: 110.6 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Grit size 80 Bore size 22,2 mm Version (flap disc) Conical For material Steel (Disc) attachment X-Lock n: PFERD PFC 125 Z 80 PSF STEELOX/X-LOCK POLIFAN flap disc 125mm conical grit 80 universal line steel/precious steel - 67668126 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLIFAN flap disc PFC 125 mm X-LOCK conical Z80 Uni. Line PSF STEELOX steel/stainless steel Characteristics The entry-level range Universal Line PSF includes robust tools for processing the most common materials Universal Line PSF tools achieve good results with high economic efficiency POLIFAN flap disc for steel and stainless steel (INOX) with aggressive stock removal rate and good tool life The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions ;X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially Advantages: With X-LOCK arbor for quick and easy tool changing Secure fixing as the tool audibly clicks into place. POLIFAN flap discs with X-LOCK can also be used on traditional angle grinders with M14 and 5/8""-11 threads. Fast work progress and high economic efficiency thanks to the good stock removal rate. Good tool life. Also suitable for low-power angle grinders. ds: dsc: kts: POLIFAN flap disc 125mm conical grit 80 universal line steel/precious steel kpn: PFC 125 Z 80 PSF STEELOX/X-LOCK kpn_dash: PFC 125 Z 80 PSF STEELOX/X kpn_clear: PFC125Z80PSFSTEELOXXLOCK bkpn: PFERD PFC 125 Z 80 PSF STEELOX/X-LOCK bkpn_clear: PFERD PFC125Z80PSFSTEELOXXLOCK c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 67668126 sr_ns: PFERD67668126
r: 03163580 p: 11.02 pid: 69654 b: PFERD q: 0 st: lt: 7 ean: 4007220955192 sr: PFERD 43468880 sr_no_br: 43468880 sr_no_br_cl: 43468880 sr_cl: PFERD43468880 sr_dash: sold: 110.2 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection size (machine) M14 Connection type (machine) Internal thread Twisted No Wire thickness 0,3 mm Material (brush filament) Steel wire n: PFERD 43468880 cup brush unturned TBU Ø 60 mm M14 steel wire dia. 0.30 angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD cup brush crimped TBU dia. 60mm M14 steel wire dia. 0.30 angle grinders Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting on large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: cup brush unturned TBU Ø 60 mm M14 steel wire dia. 0.30 angle grinders kpn: 43468880 kpn_dash: kpn_clear: 43468880 bkpn: PFERD 43468880 bkpn_clear: PFERD 43468880 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43468880 sr_ns: PFERD43468880
r: 08078249 p: 2.2 pid: 65048 b: PFERD q: 0 st: lt: 8 ean: 4007220799680 sr: PFERD 45020104 sr_no_br: 45020104 sr_no_br_cl: 45020104 sr_cl: PFERD45020104 sr_dash: sold: 110 p_range: none type: standard act: 1 avo: 1 av: Width 16 mm Length 480 mm Grit size 80 n: PFERD 45020104 Ceramic grit grinding belt BA 16x480 mm CO-COOL80 for grinding stainless steel with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD ceramic oxide grain abrasive belt BA 16x480mm CO-COOL80 for grinding stainless steel with a belt grinder Characteristics For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: Ceramic grit grinding belt BA 16x480 mm CO-COOL80 for grinding stainless steel with belt grinder kpn: 45020104 kpn_dash: kpn_clear: 45020104 bkpn: PFERD 45020104 bkpn_clear: PFERD 45020104 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45020104 sr_ns: PFERD45020104
r: 04024349 p: 10.88 pid: 33027 b: PFERD q: 0 st: lt: 3 ean: 4007220157220 sr: PFERD 44666180 sr_no_br: 44666180 sr_no_br_cl: 44666180 sr_cl: PFERD44666180 sr_dash: sold: 108.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 60 mm Connection type (machine) Shank Width 50 mm Connection size (machine) 6 mm Grit size 180 n: PFERD PNL 6050/6 A 180 POLINOX fleece grinding pen 60x50 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing - 44666180 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD POLINOX non-woven mounted grinding wheel PNL dia. 60x50 mm shank dia. 6 mm A180 for fine grinding and finishing Characteristics POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven abrasive flaps are arranged radially A long tool life is achieved through the dense packing of the flaps The tool is particularly used for surface work Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding pen 60x50 mm, shank dia. 6 mm, 180 grit for fine grinding & finishing kpn: PNL 6050/6 A 180 kpn_dash: kpn_clear: PNL60506A180 bkpn: PFERD PNL 6050/6 A 180 bkpn_clear: PFERD PNL60506A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44666180 sr_ns: PFERD44666180
r: 57993242 p: 54.11 pid: 35156 b: PFERD q: 0 st: lt: 8 ean: 4007220469637 sr: PFERD 44736121 sr_no_br: 44736121 sr_no_br_cl: 44736121 sr_cl: PFERD44736121 sr_dash: sold: 108.22 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 200 mm Grit size 120 Connection size (machine) 44 mm Connection type (machine) Bore Width 30 mm n: PFERD FR 20030/44,0 A 120 flap wheel 200x30 mm, bore Ø 44 mm, grain 120 for universal use - 44736121 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel FR dia. 200x30mm centre hole dia. 44.0mm A120 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 200x30 mm, bore Ø 44 mm, grain 120 for universal use kpn: FR 20030/44,0 A 120 kpn_dash: kpn_clear: FR20030440A120 bkpn: PFERD FR 20030/44,0 A 120 bkpn_clear: PFERD FR20030440A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44736121 sr_ns: PFERD44736121
r: 08077622 p: 54.08 pid: 33545 b: PFERD q: 0 st: lt: 8 ean: 4007220105498 sr: PFERD 44727212 sr_no_br: 44727212 sr_no_br_cl: 44727212 sr_cl: PFERD44727212 sr_dash: sold: 108.16 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 120 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 15050/25,4 CO-COOL 120 flap wheel 150x50 mm, bore Ø 25.4 mm, grit 120 for cool grinding on stainless steel - 44727212 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x50 mm centre hole dia. 25.4 mm CO-COOL120 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x50 mm, bore Ø 25.4 mm, grit 120 for cool grinding on stainless steel kpn: FR 15050/25,4 CO-COOL 120 kpn_dash: FR 15050/25,4 CO kpn_clear: FR15050254COCOOL120 bkpn: PFERD FR 15050/25,4 CO-COOL 120 bkpn_clear: PFERD FR15050254COCOOL120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44727212 sr_ns: PFERD44727212
r: 51183777 p: 54.06 pid: 120519 b: PFERD q: 0 st: lt: 8 ean: 4007220047149 sr: PFERD 21112928 sr_no_br: 21112928 sr_no_br_cl: 21112928 sr_cl: PFERD21112928 sr_dash: sold: 108.12 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Shank size (milling cutter) 8 mm Shank type Cylindrical Shape (burr cutter) Sphere (D) Cutting length 14,3 mm n: PFERD KUD 1614/8 Z3 PLUS tungsten carbide burrs ball shape 16x14mm 8mm universal medium with crosscut teeth - 21112928 cn: ROTARY BURR cn2: ROTARY BURR cn_clear: ROTARYBURR d: Product description PFERD Tungsten carbide burr ball KUD dia. 16x14 mm shank dia. 8 mm Z3P universal medium cross cut Characteristics Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys It is characterized by its high stock removal rate Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing They provide a good stock removal rate and are not specific to a particular material Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033 Advantages: Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating. Long tool life. The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive. High surface quality. ds: dsc: kts: tungsten carbide burrs ball shape 16x14mm 8mm universal medium with crosscut teeth kpn: KUD 1614/8 Z3 PLUS kpn_dash: kpn_clear: KUD16148Z3PLUS bkpn: PFERD KUD 1614/8 Z3 PLUS bkpn_clear: PFERD KUD16148Z3PLUS c_path: Home / Tools / Machining tools / Cutting tools / Milling / Rotary burr | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd milling / Pferd rotary burr sr_no_br_cl_ns: 21112928 sr_ns: PFERD21112928
r: 02964855 p: 4.32 pid: 65607 b: PFERD q: 0 st: lt: 10 ean: 4007220113493 sr: PFERD 61340125 sr_no_br: 61340125 sr_no_br_cl: 61340125 sr_cl: PFERD61340125 sr_dash: sold: 108 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Connection size (disc) 22,2 mm Connection type (disc) X-Lock For material Steel; Stainless steel Shape (cutting disc) Flat Thickness 2,4 mm n: PFERD 61340125 cut-off wheel EH 125x2,4 mm X-LOCK performance line SG STEELOX for steel/stainless steel cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description PFERD Cut-off wheel EH 125x2.4 mm X-LOCK depressed centre Performance Line SG STEELOX for steel/stainless steel Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency Cut-off wheel for steel and stainless steel (INOX) with high cutting performance and maximum tool life The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially Advantages: With X-LOCK arbor for quick and easy tool changing. Suitable for general use on steel and stainless steel (INOX). Fast work progress thanks to good cutting performance. Maximum economic efficiency due to maximum tool life. ds: dsc: kts: cut-off wheel EH 125x2,4 mm X-LOCK performance line SG STEELOX for steel/stainless steel kpn: 61340125 kpn_dash: kpn_clear: 61340125 bkpn: PFERD 61340125 bkpn_clear: PFERD 61340125 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd cutting disc sr_no_br_cl_ns: 61340125 sr_ns: PFERD61340125
