PFERD Tungsten carbide small high-performance burr set 1306 MICRO 3-piece dia. 6 mm shank dia. 6 mm finishing
Characteristics
Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are used for example
They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces
They also operate with low vibration and little noise
They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications
Almost all materials up to a hardness of 68 HRC can be machined
The 1306 MICRO set contains three tungsten carbide burrs for finishing work in the most common shapes and dimensions
The sturdy plastic box protects the tools from dirt and damage
Advantages:
High surface quality.
Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
Use on almost all materials up to 68 HRC.
The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.
