r: 03237341 p: 15.36 pid: 66862 b: PFERD q: 0 st: lt: 8 ean: 4007220106334 sr: PFERD 44695101 sr_no_br: 44695101 sr_no_br_cl: 44695101 sr_cl: PFERD44695101 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Grit size 60 Bore size 22,2 mm For material Stainless steel Series POLIVLIES (Disc) attachment Bore hole n: PFERD PVZ 115 CO-COOL 60 / A 100 G POLIVLIES flap disc ceramic 115mm bore 22,23mm grit 100 coarse for fine grinding - 44695101 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLIVLIES flap disc PVZ ceramic dia. 115 mm hole 22.23 mm CO-COOL60/A100 G for fine grinding Characteristics For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding They are especially well-suited to work on large stainless steel (INOX) surfaces POLIVLIES grit size 100 G = coarse (yellow-brown) Advantages: High economic efficiency due to high abrasive performance and long tool life. Creates a consistently high surface quality over the entire tool life, as new sharp abrasive is steadily released. Highly flexible, enabling optimal adjustment to the contour. ds: dsc: kts: POLIVLIES flap disc ceramic 115mm bore 22,23mm grit 100 coarse for fine grinding kpn: PVZ 115 CO-COOL 60 / A 100 G kpn_dash: PVZ 115 CO kpn_clear: PVZ115COCOOL60A100G bkpn: PFERD PVZ 115 CO-COOL 60 / A 100 G bkpn_clear: PFERD PVZ115COCOOL60A100G c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 44695101 sr_ns: PFERD44695101
r: 03175071 p: 15.36 pid: 66775 b: PFERD q: 0 st: lt: 8 ean: 4007220104286 sr: PFERD 44692261 sr_no_br: 44692261 sr_no_br_cl: 44692261 sr_cl: PFERD44692261 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Grit size 100 Bore size 22,2 mm For material Steel; Stainless steel; Non-ferrous metal Series POLINOX (Disc) attachment Bore hole n: PFERD PNL 125-22,23 A 100 POLINOX fleece grinding wheel 125mm bore 22,23mm grit 100 for fine grinding & finishing - 44692261 cn: FLAP DISC cn2: FLAP DISC cn_clear: FLAPDISC d: Product description PFERD POLINOX non-woven fibre-backing disc PNL dia. 125 mm centre hole dia. 22.23 mm A100 for fine grinding and finishing Characteristics POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated The non-woven abrasive flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down A long tool life is achieved through the dense packing of the flaps The tool is designed for working on large surfaces with speed-adjustable angle grinders Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool grinding and low thermal load on the workpiece. The open structure and high flexibility of the non-woven material prevents tool clogging. ds: dsc: kts: POLINOX fleece grinding wheel 125mm bore 22,23mm grit 100 for fine grinding & finishing kpn: PNL 125-22,23 A 100 kpn_dash: PNL 125 kpn_clear: PNL1252223A100 bkpn: PFERD PNL 125-22,23 A 100 bkpn_clear: PFERD PNL1252223A100 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Slat disc sr_no_br_cl_ns: 44692261 sr_ns: PFERD44692261
r: 04010478 p: 15.3 pid: 66075 b: PFERD q: 0 st: lt: 10 ean: 4007220515297 sr: PFERD 44692725 sr_no_br: 44692725 sr_no_br_cl: 44692725 sr_cl: PFERD44692725 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Thickness 13 mm (Disc) attachment Bore hole Bore size 22,2 mm Perforated No For material Steel; Stainless steel; Non-ferrous metal Series POLICLEAN n: PFERD 44692725 POLICLEAN PCLD cleaning fleece Ø 125x13 mm bore Ø 22.3 mm for coarse cleaning work cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description PFERD POLICLEAN PCLD non-woven cleaning fabric dia. 125x13 mm hole dia. 22.3 mm for coarse cleaning work Characteristics The non-woven cleaning material is glued onto a glass-fabric base This makes POLICLEAN discs suitable for use in face-down grinding For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residue POLICLEAN is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibres and abrasive grain Advantages: The standard version (black) generates finer surfaces and is more flexible. High flexibility and open structure mean optimal adjustment to contours and no clogging of the tool itself. ds: dsc: kts: POLICLEAN PCLD cleaning fleece Ø 125x13 mm bore Ø 22.3 mm for coarse cleaning work kpn: 44692725 kpn_dash: kpn_clear: 44692725 bkpn: PFERD 44692725 bkpn_clear: PFERD 44692725 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Abrasive disc sr_no_br_cl_ns: 44692725 sr_ns: PFERD44692725
r: 08078406 p: 15.3 pid: 64279 b: PFERD q: 0 st: lt: 8 ean: 4007220950722 sr: PFERD 45005723 sr_no_br: 45005723 sr_no_br_cl: 45005723 sr_cl: PFERD45005723 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 75 mm Length 2000 mm Grit size 50 n: PFERD 45005723 Ceramic grit grinding belt BA 75x2000 mm CO50 highest efficiency on steel with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD ceramic oxide grain abrasive belt BA 75x2000mm CO50 for maximum stock removal on steel with a belt grinder Characteristics For aggressive grinding with maximum stock removal rate and very good tool life Consistently high performance due to self-sharpening ceramic oxide grain The ceramic oxide grain is specifically designed for work on hard materials and layers Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: Ceramic grit grinding belt BA 75x2000 mm CO50 highest efficiency on steel with belt grinder kpn: 45005723 kpn_dash: kpn_clear: 45005723 bkpn: PFERD 45005723 bkpn_clear: PFERD 45005723 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005723 sr_ns: PFERD45005723
r: 08079583 p: 15.26 pid: 33390 b: PFERD q: 0 st: lt: 8 ean: 4007220146194 sr: PFERD 41289403 sr_no_br: 41289403 sr_no_br_cl: 41289403 sr_cl: PFERD41289403 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Thickness 40 mm Grit size 30 n: PFERD PF ZY 5040 M8 CN 30 Poliflex marbling roller cylindrical shape 50x40 mm thread M8 binding PUR SIC30 - 41289403 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Poliflex marbling tool holder cylindrical shape dia. 50x40mm thread M8 bond PUR SIC30 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Mounted grinding wheel in cylindrical shape, for fine grinding of small surfaces Poliflex fine grinding tools with the PUR bond are manufactured with green silicon carbide (SiC) The PUR bond is a very soft bond which is available in two hardness grades (PUR-W, PUR-MH) It is homogeneously interspersed with abrasive grain Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool and very gentle grinding thanks to open structure and elastic bond. Produces a fine, matt surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex marbling roller cylindrical shape 50x40 mm thread M8 binding PUR SIC30 kpn: PF ZY 5040 M8 CN 30 kpn_dash: kpn_clear: PFZY5040M8CN30 bkpn: PFERD PF ZY 5040 M8 CN 30 bkpn_clear: PFERD PFZY5040M8CN30 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 41289403 sr_ns: PFERD41289403
r: 08079584 p: 15.26 pid: 36021 b: PFERD q: 0 st: lt: 8 ean: 4007220146200 sr: PFERD 41289408 sr_no_br: 41289408 sr_no_br_cl: 41289408 sr_cl: PFERD41289408 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Thickness 40 mm Grit size 80 n: PFERD PF ZY 5040 M8 CN 80 Poliflex marbling roller cylindrical shape 50x40 mm thread M8 binding PUR SIC80 - 41289408 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Poliflex marbling tool holder cylindrical shape dia. 50x40mm thread M8 bond PUR SIC80 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Mounted grinding wheel in cylindrical shape, for fine grinding of small surfaces Poliflex fine grinding tools with the PUR bond are manufactured with green silicon carbide (SiC) The PUR bond is a very soft bond which is available in two hardness grades (PUR-W, PUR-MH) It is homogeneously interspersed with abrasive grain Advantages: Highly flexible, enabling optimal adjustment to the contour. Cool and very gentle grinding thanks to open structure and elastic bond. Produces a fine, matt surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: Poliflex marbling roller cylindrical shape 50x40 mm thread M8 binding PUR SIC80 kpn: PF ZY 5040 M8 CN 80 kpn_dash: kpn_clear: PFZY5040M8CN80 bkpn: PFERD PF ZY 5040 M8 CN 80 bkpn_clear: PFERD PFZY5040M8CN80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 41289408 sr_ns: PFERD41289408
r: 08077747 p: 15.21 pid: 34531 b: PFERD q: 0 st: lt: 8 ean: 4007220033067 sr: PFERD 43200354 sr_no_br: 43200354 sr_no_br_cl: 43200354 sr_cl: PFERD43200354 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 SiC 320 0,55 miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 - 43200354 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm SiC filament dia. 0.55 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 kpn: PBU 0505/3 SiC 320 0,55 kpn_dash: kpn_clear: PBU05053SiC320055 bkpn: PFERD PBU 0505/3 SiC 320 0,55 bkpn_clear: PFERD PBU05053SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200354 sr_ns: PFERD43200354
r: 08077728 p: 15.21 pid: 35105 b: PFERD q: 0 st: lt: 8 ean: 4007220032947 sr: PFERD 43200311 sr_no_br: 43200311 sr_no_br_cl: 43200311 sr_cl: PFERD43200311 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 AO 320 0,50 miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 - 43200311 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 kpn: PBU 0505/2,34 AO 320 0,50 kpn_dash: kpn_clear: PBU0505234AO320050 bkpn: PFERD PBU 0505/2,34 AO 320 0,50 bkpn_clear: PFERD PBU0505234AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200311 sr_ns: PFERD43200311
r: 08077739 p: 15.21 pid: 34287 b: PFERD q: 0 st: lt: 8 ean: 4007220033050 sr: PFERD 43200361 sr_no_br: 43200361 sr_no_br_cl: 43200361 sr_cl: PFERD43200361 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 AO 320 0,50 miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 - 43200361 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 kpn: PBU 0505/3 AO 320 0,50 kpn_dash: kpn_clear: PBU05053AO320050 bkpn: PFERD PBU 0505/3 AO 320 0,50 bkpn_clear: PFERD PBU05053AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200361 sr_ns: PFERD43200361
r: 08077748 p: 15.21 pid: 34305 b: PFERD q: 0 st: lt: 8 ean: 4007220033074 sr: PFERD 43200355 sr_no_br: 43200355 sr_no_br_cl: 43200355 sr_cl: PFERD43200355 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 SiC 800 0,25 miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 - 43200355 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 kpn: PBU 0505/3 SiC 800 0,25 kpn_dash: kpn_clear: PBU05053SiC800025 bkpn: PFERD PBU 0505/3 SiC 800 0,25 bkpn_clear: PFERD PBU05053SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200355 sr_ns: PFERD43200355
r: 08077740 p: 15.21 pid: 34292 b: PFERD q: 0 st: lt: 8 ean: 4007220033043 sr: PFERD 43200360 sr_no_br: 43200360 sr_no_br_cl: 43200360 sr_cl: PFERD43200360 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 AO 600 0,30 miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 - 43200360 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 kpn: PBU 0505/3 AO 600 0,30 kpn_dash: kpn_clear: PBU05053AO600030 bkpn: PFERD PBU 0505/3 AO 600 0,30 bkpn_clear: PFERD PBU05053AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200360 sr_ns: PFERD43200360
r: 08077729 p: 15.21 pid: 34271 b: PFERD q: 0 st: lt: 8 ean: 4007220032930 sr: PFERD 43200310 sr_no_br: 43200310 sr_no_br_cl: 43200310 sr_cl: PFERD43200310 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 AO 600 0,30 miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 - 43200310 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 kpn: PBU 0505/2,34 AO 600 0,30 kpn_dash: kpn_clear: PBU0505234AO600030 bkpn: PFERD PBU 0505/2,34 AO 600 0,30 bkpn_clear: PFERD PBU0505234AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200310 sr_ns: PFERD43200310
r: 08077736 p: 15.21 pid: 36864 b: PFERD q: 0 st: lt: 8 ean: 4007220032961 sr: PFERD 43200305 sr_no_br: 43200305 sr_no_br_cl: 43200305 sr_cl: PFERD43200305 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 SiC 800 0,25 miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 - 43200305 cn: BRUSH END BRUSH cn2: BRUSH END BRUSH cn_clear: BRUSHENDBRUSH d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 kpn: PBU 0505/2,34 SiC 800 0,25 kpn_dash: kpn_clear: PBU0505234SiC800025 bkpn: PFERD PBU 0505/2,34 SiC 800 0,25 bkpn_clear: PFERD PBU0505234SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Brush end brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd brush end brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200305 sr_ns: PFERD43200305
r: 08078243 p: 15.2 pid: 65524 b: PFERD q: 0 st: lt: 8 ean: 4007220585979 sr: PFERD 45006008 sr_no_br: 45006008 sr_no_br_cl: 45006008 sr_cl: PFERD45006008 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 150 mm Length 2000 mm Grit size 80 n: PFERD 45006008 corundum grinding belt BA 150x2000 mm A80 for universal use with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 150x2000mm A80 for general use with a belt grinder Characteristics For general applications from coarse to fine grinding Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 150x2000 mm A80 for universal use with belt grinder kpn: 45006008 kpn_dash: kpn_clear: 45006008 bkpn: PFERD 45006008 bkpn_clear: PFERD 45006008 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45006008 sr_ns: PFERD45006008
r: 04010502 p: 15.19 pid: 67009 b: PFERD q: 0 st: lt: 8 ean: 4007220162484 sr: PFERD 61329325 sr_no_br: 61329325 sr_no_br_cl: 61329325 sr_cl: PFERD61329325 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 300 mm Connection size (disc) 25,4 mm Connection type (disc) Bore For material Steel; Cast iron Shape (cutting disc) Flat Thickness 4 mm n: PFERD 61329325 cut-off wheel cut-off machine EHT 300x4,0x25,4 mm SG STEEL for steel (80 m/s) cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description PFERD Cut-off wheel cut-off grinder EHT 300x4.0x25.4 mm SG STEEL for steel (80 m/s) Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency PFERD offers cut-off wheels for petrol cutters and electric cut-off grinders in a variety of designs and dimensions The robust cut-off wheels are suited to cutting steel, stone, concrete, cast iron and other materials Cut-off wheel for use on petrol cutters and cut-off grinders with high cutting performance and maximum tool life Advantages: Fast work progress thanks to good cutting performance. Maximum economic efficiency due to maximum tool life. ds: dsc: kts: cut-off wheel cut-off machine EHT 300x4,0x25,4 mm SG STEEL for steel (80 m/s) kpn: 61329325 kpn_dash: kpn_clear: 61329325 bkpn: PFERD 61329325 bkpn_clear: PFERD 61329325 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd cutting disc sr_no_br_cl_ns: 61329325 sr_ns: PFERD61329325
r: 04010501 p: 15.19 pid: 65736 b: PFERD q: 0 st: lt: 8 ean: 4007220162477 sr: PFERD 61329322 sr_no_br: 61329322 sr_no_br_cl: 61329322 sr_cl: PFERD61329322 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 300 mm Connection size (disc) 22,2 mm Connection type (disc) Bore For material Steel; Cast iron Shape (cutting disc) Flat Thickness 4 mm n: PFERD 61329322 cut-off wheel cut-off machine EHT 300x4,0x22,23 mm SG STEEL for steel (80 m/s) cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description PFERD Cut-off wheel cut-off grinder EHT 300x4.0x22.23 mm SG STEEL for steel (80 m/s) Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency PFERD offers cut-off wheels for petrol cutters and electric cut-off grinders in a variety of designs and dimensions The robust cut-off wheels are suited to cutting steel, stone, concrete, cast iron and other materials Cut-off wheel for use on petrol cutters and cut-off grinders with high cutting performance and maximum tool life Advantages: Fast work progress thanks to good cutting performance. Maximum economic efficiency due to maximum tool life. ds: dsc: kts: cut-off wheel cut-off machine EHT 300x4,0x22,23 mm SG STEEL for steel (80 m/s) kpn: 61329322 kpn_dash: kpn_clear: 61329322 bkpn: PFERD 61329322 bkpn_clear: PFERD 61329322 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd cutting disc sr_no_br_cl_ns: 61329322 sr_ns: PFERD61329322
r: 22012457 p: 15.19 pid: 66478 b: PFERD q: 0 st: lt: 13 ean: 4007220162460 sr: PFERD 61329320 sr_no_br: 61329320 sr_no_br_cl: 61329320 sr_cl: PFERD61329320 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 300 mm Connection size (disc) 20 mm Connection type (disc) Bore For material Steel Shape (cutting disc) Flat Thickness 4 mm n: PFERD 61329320 Cut-off wheel EHT 300x4,0x20 mm SG STEEL for steel (80 m/s) cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description PFERD cut-off wheel cut-off grinder EHT 300x4.0x20mm SG STEEL for steel (80 m/s) Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency PFERD offers cut-off wheels for petrol cutters and electric cut-off grinders in a variety of designs and dimensions The robust cut-off wheels are suited to cutting steel, stone, concrete, cast iron and other materials Cut-off wheel for use on petrol cutters and cut-off grinders with high cutting performance and maximum tool life Advantages: Fast work progress thanks to good cutting performance. Maximum economic efficiency due to maximum tool life. ds: dsc: kts: Cut-off wheel EHT 300x4,0x20 mm SG STEEL for steel (80 m/s) kpn: 61329320 kpn_dash: kpn_clear: 61329320 bkpn: PFERD 61329320 bkpn_clear: PFERD 61329320 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd cutting disc sr_no_br_cl_ns: 61329320 sr_ns: PFERD61329320
