r: 03208520 p: 2.68 pid: 34876 b: PFERD q: 0 st: lt: 8 ean: 4007220102176 sr: PFERD 44400080 sr_no_br: 44400080 sr_no_br_cl: 44400080 sr_cl: PFERD44400080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 2010/6 SiC 80 flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals - 44400080 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 20x10 mm shank dia. 6 mm SIC80 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals kpn: F 2010/6 SiC 80 kpn_dash: kpn_clear: F20106SiC80 bkpn: PFERD F 2010/6 SiC 80 bkpn_clear: PFERD F20106SiC80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400080 sr_ns: PFERD44400080
r: 03208519 p: 2.68 pid: 32383 b: PFERD q: 0 st: lt: 8 ean: 4007220102145 sr: PFERD 44400060 sr_no_br: 44400060 sr_no_br_cl: 44400060 sr_cl: PFERD44400060 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 2010/6 SiC 60 flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals - 44400060 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 20x10 mm shank dia. 6 mm SIC60 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals kpn: F 2010/6 SiC 60 kpn_dash: kpn_clear: F20106SiC60 bkpn: PFERD F 2010/6 SiC 60 bkpn_clear: PFERD F20106SiC60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400060 sr_ns: PFERD44400060
r: 03208522 p: 2.68 pid: 32387 b: PFERD q: 0 st: lt: 8 ean: 4007220102183 sr: PFERD 44400120 sr_no_br: 44400120 sr_no_br_cl: 44400120 sr_cl: PFERD44400120 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 2010/6 SiC 120 flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals - 44400120 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 20x10 mm shank dia. 6 mm SIC120 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 20x10 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals kpn: F 2010/6 SiC 120 kpn_dash: kpn_clear: F20106SiC120 bkpn: PFERD F 2010/6 SiC 120 bkpn_clear: PFERD F20106SiC120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400120 sr_ns: PFERD44400120
r: 04024054 p: 2.57 pid: 32582 b: PFERD q: 0 st: lt: 8 ean: 4007220154113 sr: PFERD 44400123 sr_no_br: 44400123 sr_no_br_cl: 44400123 sr_cl: PFERD44400123 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 3 mm Grit size 120 n: PFERD F 2010/3 A 120 flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 120 for fine grinding & finishing - 44400123 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 3 mm A120 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 120 for fine grinding & finishing kpn: F 2010/3 A 120 kpn_dash: kpn_clear: F20103A120 bkpn: PFERD F 2010/3 A 120 bkpn_clear: PFERD F20103A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400123 sr_ns: PFERD44400123
r: 04010475 p: 2.57 pid: 32560 b: PFERD q: 0 st: lt: 4 ean: 4007220292617 sr: PFERD 44400126 sr_no_br: 44400126 sr_no_br_cl: 44400126 sr_cl: PFERD44400126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 2010/6 A 120 flap brushes corundum 20x10 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing - 44400126 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 6 mm A120 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing kpn: F 2010/6 A 120 kpn_dash: kpn_clear: F20106A120 bkpn: PFERD F 2010/6 A 120 bkpn_clear: PFERD F20106A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400126 sr_ns: PFERD44400126
r: 04024057 p: 2.57 pid: 32641 b: PFERD q: 0 st: lt: 8 ean: 4007220292563 sr: PFERD 44400183 sr_no_br: 44400183 sr_no_br_cl: 44400183 sr_cl: PFERD44400183 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 3 mm Grit size 180 n: PFERD F 2010/3 A 180 flap brushes corundum 20x10 mm, shank dia. 3 mm, 180 grit for fine grinding & finishing - 44400183 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 3 mm A180 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 3 mm, 180 grit for fine grinding & finishing kpn: F 2010/3 A 180 kpn_dash: kpn_clear: F20103A180 bkpn: PFERD F 2010/3 A 180 bkpn_clear: PFERD F20103A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400183 sr_ns: PFERD44400183
r: 02813967 p: 2.57 pid: 34819 b: PFERD q: 0 st: lt: 3 ean: 4007220235478 sr: PFERD 47801067 sr_no_br: 47801067 sr_no_br_cl: 47801067 sr_cl: PFERD47801067 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 2010/6 A 60 flap brushes corundum 20x10 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing - 47801067 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 6 mm A60 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing kpn: F 2010/6 A 60 kpn_dash: kpn_clear: F20106A60 bkpn: PFERD F 2010/6 A 60 bkpn_clear: PFERD F20106A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47801067 sr_ns: PFERD47801067
r: 03209235 p: 2.57 pid: 32494 b: PFERD q: 0 st: lt: 6 ean: 4007220378670 sr: PFERD 47801528 sr_no_br: 47801528 sr_no_br_cl: 47801528 sr_cl: PFERD47801528 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 3 mm Grit size 320 n: PFERD F 2010/3 A 320 flap brushes corundum 20x10 mm, shank dia. 3 mm, 320 grit for fine grinding & finishing - 47801528 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 3 mm A320 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 3 mm, 320 grit for fine grinding & finishing kpn: F 2010/3 A 320 kpn_dash: kpn_clear: F20103A320 bkpn: PFERD F 2010/3 A 320 bkpn_clear: PFERD F20103A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47801528 sr_ns: PFERD47801528
r: 03209228 p: 2.57 pid: 34945 b: PFERD q: 0 st: lt: 4 ean: 4007220378663 sr: PFERD 47801527 sr_no_br: 47801527 sr_no_br_cl: 47801527 sr_cl: PFERD47801527 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 3 mm Grit size 240 n: PFERD F 2010/3 A 240 flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 240 for fine grinding & finishing - 47801527 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 3 mm A240 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 240 for fine grinding & finishing kpn: F 2010/3 A 240 kpn_dash: kpn_clear: F20103A240 bkpn: PFERD F 2010/3 A 240 bkpn_clear: PFERD F20103A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 47801527 sr_ns: PFERD47801527
r: 03208545 p: 2.57 pid: 33983 b: PFERD q: 0 st: lt: 8 ean: 4007220154120 sr: PFERD 44400153 sr_no_br: 44400153 sr_no_br_cl: 44400153 sr_cl: PFERD44400153 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 3 mm Grit size 150 n: PFERD F 2010/3 A 150 flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 150 for fine grinding & finishing - 44400153 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 3 mm A150 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 3 mm, grain 150 for fine grinding & finishing kpn: F 2010/3 A 150 kpn_dash: kpn_clear: F20103A150 bkpn: PFERD F 2010/3 A 150 bkpn_clear: PFERD F20103A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400153 sr_ns: PFERD44400153
r: 57993275 p: 2.57 pid: 34332 b: PFERD q: 0 st: lt: 3 ean: 4007220292631 sr: PFERD 44400186 sr_no_br: 44400186 sr_no_br_cl: 44400186 sr_cl: PFERD44400186 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 20 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 180 n: PFERD F 2010/6 A 180 flap brushes corundum 20x10 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing - 44400186 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 20x10 mm shank dia. 6 mm A180 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 20x10 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing kpn: F 2010/6 A 180 kpn_dash: kpn_clear: F20106A180 bkpn: PFERD F 2010/6 A 180 bkpn_clear: PFERD F20106A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44400186 sr_ns: PFERD44400186
r: 57940207 p: 2.55 pid: 32801 b: PFERD q: 20 st: 1 lt: 1 ean: 4007220155202 sr: PFERD 44505126 sr_no_br: 44505126 sr_no_br_cl: 44505126 sr_cl: PFERD44505126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 10 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 5010/6 A 120 flap brushes corundum 50x10 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing - 44505126 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 50x10 mm shank dia. 6 mm A120 for fine grinding & finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 50x10 mm, shank dia. 6 mm, grain 120 for fine grinding & finishing kpn: F 5010/6 A 120 kpn_dash: kpn_clear: F50106A120 bkpn: PFERD F 5010/6 A 120 bkpn_clear: PFERD F50106A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44505126 sr_ns: PFERD44505126
r: 03208562 p: 2.53 pid: 32452 b: PFERD q: 0 st: lt: 8 ean: 4007220292693 sr: PFERD 44401183 sr_no_br: 44401183 sr_no_br_cl: 44401183 sr_cl: PFERD44401183 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 3 mm Grit size 180 n: PFERD F 3005/3 A 180 flap brushes corundum 30x5 mm, shank dia. 3 mm, 180 grit for fine grinding & finishing - 44401183 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 3 mm A180 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 3 mm, 180 grit for fine grinding & finishing kpn: F 3005/3 A 180 kpn_dash: kpn_clear: F30053A180 bkpn: PFERD F 3005/3 A 180 bkpn_clear: PFERD F30053A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401183 sr_ns: PFERD44401183
r: 03208546 p: 2.53 pid: 33989 b: PFERD q: 0 st: lt: 8 ean: 4007220154137 sr: PFERD 44401063 sr_no_br: 44401063 sr_no_br_cl: 44401063 sr_cl: PFERD44401063 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 3 mm Grit size 60 n: PFERD F 3005/3 A 60 flap brushes corundum 30x5 mm, shank dia. 3 mm, grit 60 for fine grinding & finishing - 44401063 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 3 mm A60 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 3 mm, grit 60 for fine grinding & finishing kpn: F 3005/3 A 60 kpn_dash: kpn_clear: F30053A60 bkpn: PFERD F 3005/3 A 60 bkpn_clear: PFERD F30053A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401063 sr_ns: PFERD44401063
r: 03208548 p: 2.53 pid: 33016 b: PFERD q: 0 st: lt: 8 ean: 4007220154144 sr: PFERD 44401066 sr_no_br: 44401066 sr_no_br_cl: 44401066 sr_cl: PFERD44401066 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 3005/6 A 60 flap brushes corundum 30x5 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing - 44401066 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 6 mm A60 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 6 mm, grit 60 for fine grinding & finishing kpn: F 3005/6 A 60 kpn_dash: kpn_clear: F30056A60 bkpn: PFERD F 3005/6 A 60 bkpn_clear: PFERD F30056A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401066 sr_ns: PFERD44401066
r: 03208557 p: 2.53 pid: 33995 b: PFERD q: 0 st: lt: 8 ean: 4007220154199 sr: PFERD 44401153 sr_no_br: 44401153 sr_no_br_cl: 44401153 sr_cl: PFERD44401153 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 3 mm Grit size 150 n: PFERD F 3005/3 A 150 flap brushes corundum 30x5 mm, shank dia. 3 mm, grain 150 for fine grinding & finishing - 44401153 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 3 mm A150 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 3 mm, grain 150 for fine grinding & finishing kpn: F 3005/3 A 150 kpn_dash: kpn_clear: F30053A150 bkpn: PFERD F 3005/3 A 150 bkpn_clear: PFERD F30053A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401153 sr_ns: PFERD44401153
r: 04024068 p: 2.53 pid: 34097 b: PFERD q: 0 st: lt: 8 ean: 4007220292709 sr: PFERD 44401186 sr_no_br: 44401186 sr_no_br_cl: 44401186 sr_cl: PFERD44401186 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 180 n: PFERD F 3005/6 A 180 flap brushes corundum 30x5 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing - 44401186 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 6 mm A180 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 6 mm, 180-grit paper for fine grinding & finishing kpn: F 3005/6 A 180 kpn_dash: kpn_clear: F30056A180 bkpn: PFERD F 3005/6 A 180 bkpn_clear: PFERD F30056A180 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401186 sr_ns: PFERD44401186
r: 04024061 p: 2.53 pid: 32644 b: PFERD q: 0 st: lt: 6 ean: 4007220154151 sr: PFERD 44401083 sr_no_br: 44401083 sr_no_br_cl: 44401083 sr_cl: PFERD44401083 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 3 mm Grit size 80 n: PFERD F 3005/3 A 80 flap brushes corundum 30x5 mm, shank dia. 3 mm, grit 80 for fine grinding & finishing - 44401083 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 3 mm A80 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 3 mm, grit 80 for fine grinding & finishing kpn: F 3005/3 A 80 kpn_dash: kpn_clear: F30053A80 bkpn: PFERD F 3005/3 A 80 bkpn_clear: PFERD F30053A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401083 sr_ns: PFERD44401083
r: 03208559 p: 2.53 pid: 32398 b: PFERD q: 0 st: lt: 8 ean: 4007220154205 sr: PFERD 44401156 sr_no_br: 44401156 sr_no_br_cl: 44401156 sr_cl: PFERD44401156 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 3005/6 A 150 flap brushes corundum 30x5 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing - 44401156 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 6 mm A150 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 6 mm, 150-grit paper for fine grinding & finishing kpn: F 3005/6 A 150 kpn_dash: kpn_clear: F30056A150 bkpn: PFERD F 3005/6 A 150 bkpn_clear: PFERD F30056A150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401156 sr_ns: PFERD44401156
r: 03208583 p: 2.53 pid: 33030 b: PFERD q: 0 st: lt: 15 ean: 4007220154236 sr: PFERD 44401323 sr_no_br: 44401323 sr_no_br_cl: 44401323 sr_cl: PFERD44401323 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 30 mm Connection type (machine) Shank Width 5 mm Connection size (machine) 3 mm Grit size 320 n: PFERD F 3005/3 A 320 flap brushes corundum 30x5 mm, shank dia. 3 mm, 320 grit for fine grinding & finishing - 44401323 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Aluminium oxide mounted flap wheel F dia. 30x5 mm shank dia. 3 mm A320 for fine grinding and finishing Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes corundum 30x5 mm, shank dia. 3 mm, 320 grit for fine grinding & finishing kpn: F 3005/3 A 320 kpn_dash: kpn_clear: F30053A320 bkpn: PFERD F 3005/3 A 320 bkpn_clear: PFERD F30053A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44401323 sr_ns: PFERD44401323
