r: 03180361 p: 48.29 pid: 70119 b: PFERD q: 0 st: lt: 8 ean: 4007220658796 sr: PFERD 43505202 sr_no_br: 43505202 sr_no_br_cl: 43505202 sr_cl: PFERD43505202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 6000 rpm Connection size (machine) 22,2 mm n: PFERD 18012/22,2 INOX 0,30 round brush narrow untied RBU Ø 180 x 12 mm variable arbor hole stainless steel wire-Ø 0.30 - 43505202 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 180x12xvariable hole stainless steel wire dia. 0.30 Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The brush is degreased and does not leave any oil residue on the workpiece. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush narrow untied RBU Ø 180 x 12 mm variable arbor hole stainless steel wire-Ø 0.30 kpn: 18012/22,2 INOX 0,30 kpn_dash: kpn_clear: 18012222INOX030 bkpn: PFERD 18012/22,2 INOX 0,30 bkpn_clear: PFERD 18012222INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505202 sr_ns: PFERD43505202
r: 04023635 p: 48.13 pid: 38989 b: PFERD q: 0 st: lt: 8 ean: 4007220153604 sr: PFERD 43502001 sr_no_br: 43502001 sr_no_br_cl: 43502001 sr_cl: PFERD43502001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 28 mm Max. no-load speed 8000 rpm Connection size (machine) 25,4 mm n: PFERD 10028/14,0 ST 0,30 round brush wide untied RBU Ø 100 x 28 x variable arbor hole steel wire-Ø 0.30 grinding bucket - 43502001 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 100x28xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed specially for industrial use Advantages: High economic efficiency due to very long tool life. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 100 x 28 x variable arbor hole steel wire-Ø 0.30 grinding bucket kpn: 10028/14,0 ST 0,30 kpn_dash: kpn_clear: 10028140ST030 bkpn: PFERD 10028/14,0 ST 0,30 bkpn_clear: PFERD 10028140ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43502001 sr_ns: PFERD43502001
r: 03075382 p: 47.38 pid: 69617 b: PFERD q: 0 st: lt: 11 ean: 4007220003565 sr: PFERD 43303024 sr_no_br: 43303024 sr_no_br_cl: 43303024 sr_cl: PFERD43303024 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 12512/22,2 INOX 0,50 round brush twisted RBG Ø 125 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders - 43303024 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 125x12x22.2 mm stainless steel wire dia. 0.50 mm angle grinders (10) Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 125 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders kpn: 12512/22,2 INOX 0,50 kpn_dash: kpn_clear: 12512222INOX050 bkpn: PFERD 12512/22,2 INOX 0,50 bkpn_clear: PFERD 12512222INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43303024 sr_ns: PFERD43303024
r: 03164351 p: 47.32 pid: 70057 b: PFERD q: 0 st: lt: 8 ean: 4007220751084 sr: PFERD 43303802 sr_no_br: 43303802 sr_no_br_cl: 43303802 sr_cl: PFERD43303802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Internal thread Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 9000 rpm Connection size (machine) M14 n: PFERD 17806/M14 PIPE ST 0,50 56Z PIPELINE brush twisted RBG Ø 178x6mm M14 steel wire-Ø 0.50mm 56 wire ends angle grinder - 43303802 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 178x6 mm M14 steel wire dia. 0.50 mm 56 knots angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Long tool life through use of PFERD special wire. ds: dsc: kts: PIPELINE brush twisted RBG Ø 178x6mm M14 steel wire-Ø 0.50mm 56 wire ends angle grinder kpn: 17806/M14 PIPE ST 0,50 56Z kpn_dash: kpn_clear: 17806M14PIPEST05056Z bkpn: PFERD 17806/M14 PIPE ST 0,50 56Z bkpn_clear: PFERD 17806M14PIPEST05056Z c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43303802 sr_ns: PFERD43303802
r: 08078051 p: 47.13 pid: 34533 b: PFERD q: 0 st: lt: 8 ean: 4007220956335 sr: PFERD 43701235 sr_no_br: 43701235 sr_no_br_cl: 43701235 sr_cl: PFERD43701235 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 ST 0,20 round brush wide untied RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup - 43701235 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 180x25xvariable hole steel wire dia. 0.20 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup kpn: 18025/AK32-2 ST 0,20 kpn_dash: 18025/AK32 kpn_clear: 18025AK322ST020 bkpn: PFERD 18025/AK32-2 ST 0,20 bkpn_clear: PFERD 18025AK322ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701235 sr_ns: PFERD43701235
r: 03232043 p: 46.04 pid: 38756 b: PFERD q: 0 st: lt: 8 ean: 4007220956397 sr: PFERD 43701106 sr_no_br: 43701106 sr_no_br_cl: 43701106 sr_cl: PFERD43701106 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 20 mm Max. no-load speed 8000 rpm Connection size (machine) 30 mm n: PFERD 10020/14,0 INOX 0,30 round brush wide untied RBU Ø 100 x 20 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup - 43701106 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 100x20xvariable hole stainless steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 100 x 20 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup kpn: 10020/14,0 INOX 0,30 kpn_dash: kpn_clear: 10020140INOX030 bkpn: PFERD 10020/14,0 INOX 0,30 bkpn_clear: PFERD 10020140INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701106 sr_ns: PFERD43701106
r: 03164253 p: 45.86 pid: 69467 b: PFERD q: 0 st: lt: 8 ean: 4007220003459 sr: PFERD 43302124 sr_no_br: 43302124 sr_no_br_cl: 43302124 sr_cl: PFERD43302124 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 11512/22,2 INOX 0,50 round brush twisted RBG Ø 115 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders - 43302124 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 115x12x22.2 mm stainless steel wire dia. 0.50 mm angle grinders (10) Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 115 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders kpn: 11512/22,2 INOX 0,50 kpn_dash: kpn_clear: 11512222INOX050 bkpn: PFERD 11512/22,2 INOX 0,50 bkpn_clear: PFERD 11512222INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302124 sr_ns: PFERD43302124
r: 03180321 p: 45.61 pid: 69500 b: PFERD q: 0 st: lt: 8 ean: 4007220806982 sr: PFERD 43502202 sr_no_br: 43502202 sr_no_br_cl: 43502202 sr_cl: PFERD43502202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Internal thread Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) M14 n: PFERD 11512/M14 INOX 0,30 round brush unturned RBU Ø 115 x 12 mm M14 stainless steel wire-Ø 0.30 angle grinders - 43502202 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 115x12 mm M14 stainless steel wire dia. 0.30 angle grinders Characteristics Suitable for medium-duty brushing such as derusting, cleaning of weld seams and light deburring work In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Suitable for use on angle grinders up to 80 m/s. The brush is degreased and does not leave any oil residue on the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Suitable for use on angle grinders. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 115 x 12 mm M14 stainless steel wire-Ø 0.30 angle grinders kpn: 11512/M14 INOX 0,30 kpn_dash: kpn_clear: 11512M14INOX030 bkpn: PFERD 11512/M14 INOX 0,30 bkpn_clear: PFERD 11512M14INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43502202 sr_ns: PFERD43502202
r: 08078134 p: 45.39 pid: 34602 b: PFERD q: 0 st: lt: 8 ean: 4007220808474 sr: PFERD 43100067 sr_no_br: 43100067 sr_no_br_cl: 43100067 sr_cl: PFERD43100067 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 15 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 7015/6 INOX 0,30 INOX-TOTAL round brush unturned RBUIT Ø 70 x 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43100067 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD INOX-TOTAL wheel brush crimped RBUIT dia. 70x15 mm shank dia. 6 mm stainless steel wire dia. 0.30 Characteristics Generally suitable for cleaning, deburring, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: INOX-TOTAL round brush unturned RBUIT Ø 70 x 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: 7015/6 INOX 0,30 kpn_dash: kpn_clear: 70156INOX030 bkpn: PFERD 7015/6 INOX 0,30 bkpn_clear: PFERD 70156INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43100067 sr_ns: PFERD43100067
r: 03164275 p: 45.34 pid: 70575 b: PFERD q: 0 st: lt: 112 ean: 4007220751329 sr: PFERD 43302506 sr_no_br: 43302506 sr_no_br_cl: 43302506 sr_cl: PFERD43302506 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 12506/22,2 PIPE INOX 0,50 PIPELINE brush twisted RBG Ø 125 x 6 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinder - 43302506 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 125x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Very good corrosion resistance. ds: dsc: kts: PIPELINE brush twisted RBG Ø 125 x 6 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinder kpn: 12506/22,2 PIPE INOX 0,50 kpn_dash: kpn_clear: 12506222PIPEINOX050 bkpn: PFERD 12506/22,2 PIPE INOX 0,50 bkpn_clear: PFERD 12506222PIPEINOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302506 sr_ns: PFERD43302506
r: 03180349 p: 44.28 pid: 70110 b: PFERD q: 0 st: lt: 8 ean: 4007220597880 sr: PFERD 43505006 sr_no_br: 43505006 sr_no_br_cl: 43505006 sr_cl: PFERD43505006 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 6000 rpm Connection size (machine) 22,2 mm n: PFERD 15012/22,2 INOX 0,30 round brush narrow untied RBU Ø 150 x 12 mm variable arbor hole stainless steel wire-Ø 0.30 - 43505006 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 150x12xvariable hole stainless steel wire dia. 0.30 Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The brush is degreased and does not leave any oil residue on the workpiece. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush narrow untied RBU Ø 150 x 12 mm variable arbor hole stainless steel wire-Ø 0.30 kpn: 15012/22,2 INOX 0,30 kpn_dash: kpn_clear: 15012222INOX030 bkpn: PFERD 15012/22,2 INOX 0,30 bkpn_clear: PFERD 15012222INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43505006 sr_ns: PFERD43505006
r: 02964961 p: 44.26 pid: 69397 b: PFERD q: 0 st: lt: 8 ean: 4007220119136 sr: PFERD 43302521 sr_no_br: 43302521 sr_no_br_cl: 43302521 sr_cl: PFERD43302521 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) X-Lock Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 12500 rpm n: PFERD 12506/X-LOCK PIPE ST 0,50 PIPELINE brush twisted RBG Ø 125 x 6 bore 22.2 mm X-LOCK steel wire-Ø 0.50 mm angle grinder - 43302521 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 125x6 hole 22.2 mm/X-LOCK steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions ;X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: With X-LOCK arbor for quick and easy tool changing. Secure fixing as the tool audibly clicks into place. Wheel brushes with X-LOCK can also be used on traditional angle grinders with M14 and 5/8""-11 threads. Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Long tool life through use of PFERD special wire. ds: dsc: kts: PIPELINE brush twisted RBG Ø 125 x 6 bore 22.2 mm X-LOCK steel wire-Ø 0.50 mm angle grinder kpn: 12506/X-LOCK PIPE ST 0,50 kpn_dash: 12506/X kpn_clear: 12506XLOCKPIPEST050 bkpn: PFERD 12506/X-LOCK PIPE ST 0,50 bkpn_clear: PFERD 12506XLOCKPIPEST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302521 sr_ns: PFERD43302521
r: 03182014 p: 43.86 pid: 38186 b: PFERD q: 0 st: lt: 8 ean: 4007220956311 sr: PFERD 43701217 sr_no_br: 43701217 sr_no_br_cl: 43701217 sr_cl: PFERD43701217 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 38 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 15038/AK32-2 ST 0,30 POS round brush wide unturned RBU Ø 150 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding head - 43701217 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POS wheel brush wide crimped RBU dia. 150x38xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: POS round brush wide unturned RBU Ø 150 x 38 mm variable arbor hole steel wire-Ø 0.30 grinding head kpn: 15038/AK32-2 ST 0,30 kpn_dash: 15038/AK32 kpn_clear: 15038AK322ST030 bkpn: PFERD 15038/AK32-2 ST 0,30 bkpn_clear: PFERD 15038AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701217 sr_ns: PFERD43701217
r: 08078048 p: 41.7 pid: 34530 b: PFERD q: 0 st: lt: 8 ean: 4007220659007 sr: PFERD 43304009 sr_no_br: 43304009 sr_no_br_cl: 43304009 sr_cl: PFERD43304009 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Internal thread Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) M14 n: PFERD 17813/M14 ST 0,50 round brush twisted RBG Ø 178 x 13 mm M14 steel wire-Ø 0.50 mm angle grinders - 43304009 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 178x13 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams, removal of adhesive residues and spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: round brush twisted RBG Ø 178 x 13 mm M14 steel wire-Ø 0.50 mm angle grinders kpn: 17813/M14 ST 0,50 kpn_dash: kpn_clear: 17813M14ST050 bkpn: PFERD 17813/M14 ST 0,50 bkpn_clear: PFERD 17813M14ST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304009 sr_ns: PFERD43304009
r: 08078126 p: 40.93 pid: 35151 b: PFERD q: 0 st: lt: 8 ean: 4007220808450 sr: PFERD 43100032 sr_no_br: 43100032 sr_no_br_cl: 43100032 sr_cl: PFERD43100032 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 50 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 15 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 5015/6 INOX 0,20 INOX-TOTAL round brush unturned RBUIT Ø 50 x 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43100032 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD INOX-TOTAL wheel brush crimped RBUIT dia. 50x15 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, deburring, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: INOX-TOTAL round brush unturned RBUIT Ø 50 x 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 5015/6 INOX 0,20 kpn_dash: kpn_clear: 50156INOX020 bkpn: PFERD 5015/6 INOX 0,20 bkpn_clear: PFERD 50156INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43100032 sr_ns: PFERD43100032
r: 03031785 p: 40.79 pid: 69569 b: PFERD q: 0 st: lt: 8 ean: 4007220956281 sr: PFERD 43701205 sr_no_br: 43701205 sr_no_br_cl: 43701205 sr_cl: PFERD43701205 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 15025/AK32-2 ST 0,20 round brush wide untied RBU Ø 150 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup - 43701205 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 150x25xvariable hole steel wire dia. 0.20 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 150 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup kpn: 15025/AK32-2 ST 0,20 kpn_dash: 15025/AK32 kpn_clear: 15025AK322ST020 bkpn: PFERD 15025/AK32-2 ST 0,20 bkpn_clear: PFERD 15025AK322ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701205 sr_ns: PFERD43701205
r: 04023679 p: 40.56 pid: 38546 b: PFERD q: 0 st: lt: 8 ean: 4007220530436 sr: PFERD 43506005 sr_no_br: 43506005 sr_no_br_cl: 43506005 sr_cl: PFERD43506005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted No Thickness 16 mm Max. no-load speed 6000 rpm Connection size (machine) 22,2 mm n: PFERD 20016/22,2 ST 0,25 Round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole steel wire-Ø 0.25 - 43506005 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 200x16xvariable hole steel wire dia. 0.25 Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: Round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole steel wire-Ø 0.25 kpn: 20016/22,2 ST 0,25 kpn_dash: kpn_clear: 20016222ST025 bkpn: PFERD 20016/22,2 ST 0,25 bkpn_clear: PFERD 20016222ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506005 sr_ns: PFERD43506005
r: 03180335 p: 40.43 pid: 69710 b: PFERD q: 0 st: lt: 8 ean: 4007220806807 sr: PFERD 43503003 sr_no_br: 43503003 sr_no_br_cl: 43503003 sr_cl: PFERD43503003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 8000 rpm Connection size (machine) 14 mm n: PFERD 12512/14,0 INOX 0,30 round brush narrow unturned RBU Ø 125 x 12 x 14 mm arbor hole stainless steel wire-Ø 0.30 - 43503003 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush slim crimped RBU dia. 125x12x14 mm hole stainless steel wire dia. 0.30 Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The brush is degreased and does not leave any oil residue on the workpiece. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush narrow unturned RBU Ø 125 x 12 x 14 mm arbor hole stainless steel wire-Ø 0.30 kpn: 12512/14,0 INOX 0,30 kpn_dash: kpn_clear: 12512140INOX030 bkpn: PFERD 12512/14,0 INOX 0,30 bkpn_clear: PFERD 12512140INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43503003 sr_ns: PFERD43503003
r: 08078052 p: 40.04 pid: 37136 b: PFERD q: 0 st: lt: 8 ean: 4007220956342 sr: PFERD 43701239 sr_no_br: 43701239 sr_no_br_cl: 43701239 sr_cl: PFERD43701239 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 ST 0,30 POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.30 grinding head - 43701239 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POS wheel brush wide crimped RBU dia. 180x25xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.30 grinding head kpn: 18025/AK32-2 ST 0,30 kpn_dash: 18025/AK32 kpn_clear: 18025AK322ST030 bkpn: PFERD 18025/AK32-2 ST 0,30 bkpn_clear: PFERD 18025AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701239 sr_ns: PFERD43701239
r: 03164248 p: 39.86 pid: 71278 b: PFERD q: 0 st: lt: 8 ean: 4007220530405 sr: PFERD 43108005 sr_no_br: 43108005 sr_no_br_cl: 43108005 sr_cl: PFERD43108005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 12 mm Max. no-load speed 20000 rpm Connection size (machine) 6 mm n: PFERD 10012/6 INOX 0,35 round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43108005 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 100x12 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: 10012/6 INOX 0,35 kpn_dash: kpn_clear: 100126INOX035 bkpn: PFERD 10012/6 INOX 0,35 bkpn_clear: PFERD 100126INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43108005 sr_ns: PFERD43108005
