Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Power
Max. plate thickness
Cutting track width
Steel up to 800 N/mm²
Steel up to 400 N/mm²
Steel up to 600 N/mm²
Nom. absorbed power
Cutting speed
Stroke rate
Radius of the smallest curve (inside/outside)
Reduced power
Non-ferrous metal up to 250 N/mm²
Bearing hole Ø with die
Cable with plug

Buy a Gift Card

Gift Card

Electric nibblers for cutting sheet metal

A nibbler punches a continuous line of small crescents out of sheet metal, so it follows a curve or an internal cut-out without distorting the panel and without the heat discolouration a grinder leaves behind. The edge comes off clean enough to weld or fold straight away, which is why the tool is a fixture on ventilation ducting, cladding, trailer bodies and stainless fabrication.

Capacity is the first decision. Compact machines take around 1.6 mm in mild steel from a 350W motor and are light enough to run one-handed along a marked line, while heavier machines push into 5 mm plate and need both hands and a supported panel. Rated capacity always drops in stainless, so read the stainless figure rather than the mild steel headline.

Start an internal cut from a drilled pilot hole and let the tool feed itself instead of forcing it. Nibblers belong to the cutting and bending group; where a straight edge is all you need, a sheet metal shear is quicker and leaves no swarf.

makita_jn1601

MAKITA JN1601 nibbler 1.6mm 550W

  • Power: 550 W
On stock, immediately available.
Recommended Retail Price €459.04
358.28
€296.10 excl. VAT
bosch_0601533103

BOSCH GNA 3,5 nibbler 620 W - 0601533103

  • Power: 620 W
  • Max. plate thickness: 3,5 mm
Delivery time average 9 days.
Recommended Retail Price €1,381.06
1,071.68
€885.68 excl. VAT
bosch_0601529400

BOSCH GNA 75-16 nibbler 750 W - 0601529400

  • Power: 750 W
  • Max. plate thickness: 1,6 mm
Delivery time average 9 days.
Recommended Retail Price €653.85
497.88
€411.47 excl. VAT
hikoki_cn16sauaz

HIKOKI CN16SAUAZ nibbler 1.6mm 400W

  • Power: 400 W
Delivery time average 9 days.
Recommended Retail Price €575.20
449.48
€371.47 excl. VAT
bosch_0601530103

BOSCH GNA 2,0 nibbler 500 W - 0601530103

  • Power: 500 W
  • Max. plate thickness: 2 mm
Delivery time average 9 days.
Recommended Retail Price €950.30
698.48
€577.25 excl. VAT
makita_jn3201j

MAKITA JN3201J nibbler 3.2mm 710W in MAKPAC

  • Power: 710 W
  • Max. plate thickness: 3,2 mm
Delivery time average 12 days.
Recommended Retail Price €640.54
500.88
€413.95 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.