r: 03331522 p: 169.793 pid: 178103 b: BENNING q: 0 st: lt: 11 ean: 4014651446892 sr: BENNING 4494102 sr_no_br: 4494102 sr_no_br_cl: 4494102 sr_cl: BENNING4494102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test Yes Max. current AC/DC 400 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 50 kHz Max. resistance 40 MOhm n: BENNING CM 2-1 digital current clamp 600 V / 400 A - 4494102 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Direct and alternating current measurement up to 400 A Measurement of small currents (vehicle technology, photovoltaic, industry) Low-pass filter (high-frequency suppression) during motor control measurements AutoV function for automatic AC/DC voltage detection and low input impedance (LoZ) for suppression of reactive voltages Measurement of voltage, resistance, continuity, diode, frequency and capacitance Standard: IEC/EN 61010-1 (DIN-VDE 0411-1) Dimensions: 188 x 56 x 28 mm Weight: 225 g (including batteries) ds: dsc: Scope of delivery Protection pouch Set of safety measuring leads red/black 2 batteries (AAA/IEC LR03) Operating instructions kts: digital current clamp 600 V / 400 A kpn: CM 2-1 kpn_dash: CM 2 kpn_clear: CM21 bkpn: BENNING CM 2-1 bkpn_clear: BENNING CM21 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Benning / Benning tools / Benning measuring and inspection technique / Benning digital measuring and inspection instruments / Benning digital measuring instruments / Benning multimeter sr_no_br_cl_ns: 4494102 sr_ns: BENNING4494102
r: 08127658 p: 164.467 pid: 173196 b: BOSCH q: 0 st: lt: 8 ean: 4053423340648 sr: BOSCH 0601077301 sr_no_br: 0601077301 sr_no_br_cl: 0601077301 sr_cl: BOSCH0601077301 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AA Low battery message No Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test No Measurement of noise No Max. electrical capacity 1000 µF Measurement of electrical capacity Yes Max. frequency 50 kHz Max. resistance 40 MOhm Measurement voltage Yes Current measurement Yes Measurement resistance Yes Measurement frequency Yes n: BOSCH GDM 600-15 digital multimeter with magnetic pendant in storage case (2x 1.5V AA battery) - 0601077301 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Efficient multimeter with inverted display and True RMS precision Suitable for rugged construction sites with IP65 rating for ruggedness and impact resistance Various measurements: frequency, continuity, resistance and electrical capacitance with recording of min/max/average Compact design for one-handed use, plus a built-in drop-down stand and magnetic hanger for hands-free use Product highlights The GDM 600-15 Professional is designed to increase efficiency with accurate True RMS measurements. The large inverted LCD display ensures clear reading in a variety of applications. This versatile tool measures frequency, continuity, resistance and electrical capacitance, and also records signal fluctuations with Min/Max/Average measurements. Designed to withstand rugged construction sites, the tool has an IP65 rating for enhanced ruggedness and protection against drops up to 2 m high. And with a comfortable handle that ensures less fatigue during work, the GDM 600-15 Professional can be relied on to deliver the performance needed - even in the most demanding conditions. Equipment and application Ideal for electricians, HVAC installers , facility managers and electrical engineers, the GDM 600-15 Professional is indispensable for electrical installations, maintenance and repairs. The tool measures voltage, current and resistance in various electrical systems to ensure proper operation and detect faults. The compact design allows easy one-handed operation, while an integrated drop-down stand and a separate magnetic pendant offer hands-free convenience. Additional information Compatible with the Li-Ion battery pack, the GDM 600-15 Professional provides long-lasting power. The tool is safety-tested with a measurement circuit rating of CAT III 600V and also features high-quality test pins made of flexible, durable silicone to ensure reliability. Compact and efficient, this multimeter is made to support all electrical engineering jobs. ds: Bosch PRODEALS 2026 Get your FREE measuring tools now! How does it work? Buy one or more Bosch electrical testers and choose from a range of measuring tools Upload your proof of purchase via the BoschPro360 app before September 31, 2026 Select your gift after registration The total value must be reached in a single purchase and all products must be on the same invoice Promotion period: May 1, 2026 to August 31, 2026. Gifts For purchases from €170 excl. VAT, choose a free: GLM 40-31 Professional: Laser distance meter GMS 100-23 Professional: Detector or GLL 2-10 Professional: Line laser Note: Gifts are available while supplies last. Terms and conditions apply. dsc: Scope of delivery Bag 2 x 1.5 V LR6 battery (AA) MS 90 Professional test pen (1 600 A03 8D2) MH 1 Professional magnetic pendant (1 600 A03 8CY) kts: digital multimeter with magnetic pendant in storage case (2x 1.5V AA battery) kpn: GDM 600-15 kpn_dash: GDM 600 kpn_clear: GDM60015 bkpn: BOSCH GDM 600-15 bkpn_clear: BOSCH GDM60015 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Promotions / Promotions / Brand promotions / Bosch promotions / Bosch prodeal 2026 - measuring tools promotion | Home / Our brands / Bosch / Bosch tools / Bosch measuring and inspection technique / Bosch digital measuring and inspection instruments / Bosch digital measuring instruments / Bosch multimeter sr_no_br_cl_ns: 0601077301 sr_ns: BOSCH0601077301
r: 08121984 p: 150.3 pid: 160347 b: XHANDER q: 2 st: 1 lt: 1 ean: 3661578214007 sr: XHANDER 71272737 sr_no_br: 71272737 sr_no_br_cl: 71272737 sr_cl: XHANDER71272737 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery type AAA Max. current AC/DC 400 A Automatic shut-off Yes With current clamp Yes Diode test Yes Continuity test Yes Measurement Lo-Z No Low battery message Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 40000 µF Max. frequency 1000 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: XHANDER P75R70P ammeter clamp 600V AC/DC (3x LR03 AAA battery) - 71272737 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Automatic calibration and excellent measurement performance. Measurement of voltage, current, frequency and resistance. Targeted current clamp. EF function (non-contact detection). Automatic meter selection. Large-screen LCD display. Automatic switch-off. Analogue graphic bar display. Audible and visual warning in case of incorrect operation. Technical properties of the multimeter: Measurement category: Cat III, 600V Temperature measurement: -40°C to +260°C Frequency: 10 Hz-1 MHz Data hold and max/min value recording Power supply: 3 AAA (LR03) included Lifetime warranty ds: Fill your FREE XHANDER tool bag! Buy XHANDER hand tools or measuring tools and receive a FREE XHANDER tool bag or backpack. Promotion valid from 01.07.2026 until 31.07.2026. How does it work? Purchase participating XHANDER hand tools or measuring tools and reach the required spending threshold to receive a free XHANDER tool bag or backpack. Your free gift will be added to your order automatically. No registration is required. XHANDER Fill your FREE Tool Bag deals are identified by the promotional label on the product page. Click the label to view all participating hand and measuring tools. Promotion valid from 01.07.2026 until 31.07.2026 while stocks last. Free gifts Spend €100 excl. VAT or more and receive a free XHANDER 15L tool bag (69141935). Spend €130 excl. VAT or more and receive a free XHANDER 31L tool bag (69141803). Spend €150 excl. VAT or more on XHANDER hand tools and receive a free waterproof XHANDER 37L backpack (69141919). dsc: Scope of delivery AAA (LR03) batteries x 3 Measurement leads Storage bag kts: ammeter clamp 600V AC/DC (3x LR03 AAA battery) kpn: P75R70P kpn_dash: kpn_clear: P75R70P bkpn: XHANDER P75R70P bkpn_clear: XHANDER P75R70P c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Xhander / Xhander tools / Xhander measuring and inspection technique / Xhander digital measuring and inspection instruments / Xhander digital measuring instruments / Xhander multimeter sr_no_br_cl_ns: 71272737 sr_ns: XHANDER71272737
r: 02105713 p: 139.09 pid: 178101 b: BENNING q: 0 st: lt: 12 ean: 4014650440631 sr: BENNING 4150017 sr_no_br: 4150017 sr_no_br_cl: 4150017 sr_cl: BENNING4150017 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test Yes Max. current AC/DC 200 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. resistance 20 MOhm n: BENNING CM 1-3 digital current clamp 1000 V / 200 A - 4150017 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Digital current clamp multimeter for alternating current Innovative technology, practical design Safe AC current measurements up to 200 A AC Measurement inputs for voltage, resistance, continuity and diode monitoring Integrated voltage sensor signals phase voltages via acoustic and red LED signal Locates cable breaks and faulty lamps in exposed cables (cable drum, lighting chains) from the phase supply location ds: dsc: Scope of delivery: 2 batteries (AAA) Bag Safety test leads Operating manual. kts: digital current clamp 1000 V / 200 A kpn: CM 1-3 kpn_dash: CM 1 kpn_clear: CM13 bkpn: BENNING CM 1-3 bkpn_clear: BENNING CM13 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Benning / Benning tools / Benning measuring and inspection technique / Benning digital measuring and inspection instruments / Benning digital measuring instruments / Benning multimeter sr_no_br_cl_ns: 4150017 sr_ns: BENNING4150017
r: 08122016 p: 112.099 pid: 160419 b: XHANDER q: 2 st: 1 lt: 1 ean: 3661578214014 sr: XHANDER 71272745 sr_no_br: 71272745 sr_no_br_cl: 71272745 sr_cl: XHANDER71272745 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 690 V Measurement resistance Yes Digital Yes With current clamp No Measurement frequency Yes Current measurement No Measurement voltage Yes Max. frequency 400 Hz n: XHANDER 71272745 multifunction voltage tester 690V (2x LR03 AAA battery) cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description VAT included with digital display. Voltage detector, it is also a bipolar voltage detector with LED display. The product's built-in self-test is ideal for quickly checking that the device is working correctly. It measures voltages as low as 6V and checks phase rotation order. The audible indicator makes continuity tests easier. This voltage tester is equipped with a light, allowing you to work even in dark places. Technical properties of the voltage tester: Voltage range: 6-690 V AC/DC Frequency: 40-400 Hz Measurement category: Cat III, 690 V Cat IV, 600 V Centre distance: 19 mm standardised (one-handed use) Power supply: 2 AAA (LR03) batteries included) Protection: IP65 (splash and dust proof) LED tolerance: EN 61243-V LED and LCD display of rated voltage: 6 / 12 / 24 / 50 / 120 / 230 / 400 / 690 V Has a beeper to monitor continuity tests Ability to perform unipolar and phase tests Polarity indications are indicated on the measuring area Side display for hazardous situationsbr>Side display for hazardous voltage and continuity Automatic on/off control to save battery power Data storage AAA (LR03) x 2 batteries included. Lifetime warranty ds: Fill your FREE XHANDER tool bag! Buy XHANDER hand tools or measuring tools and receive a FREE XHANDER tool bag or backpack. Promotion valid from 01.07.2026 until 31.07.2026. How does it work? Purchase participating XHANDER hand tools or measuring tools and reach the required spending threshold to receive a free XHANDER tool bag or backpack. Your free gift will be added to your order automatically. No registration is required. XHANDER Fill your FREE Tool Bag deals are identified by the promotional label on the product page. Click the label to view all participating hand and measuring tools. Promotion valid from 01.07.2026 until 31.07.2026 while stocks last. Free gifts Spend €100 excl. VAT or more and receive a free XHANDER 15L tool bag (69141935). Spend €130 excl. VAT or more and receive a free XHANDER 31L tool bag (69141803). Spend €150 excl. VAT or more on XHANDER hand tools and receive a free waterproof XHANDER 37L backpack (69141919). dsc: kts: multifunction voltage tester 690V (2x LR03 AAA battery) kpn: 71272745 kpn_dash: kpn_clear: 71272745 bkpn: XHANDER 71272745 bkpn_clear: XHANDER 71272745 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Xhander / Xhander tools / Xhander measuring and inspection technique / Xhander digital measuring and inspection instruments / Xhander digital measuring instruments / Xhander multimeter sr_no_br_cl_ns: 71272745 sr_ns: XHANDER71272745
r: 02363774 p: 59.296 pid: 178104 b: BENNING q: 1 st: 1 lt: 1 ean: 4014650440846 sr: BENNING 833 280 00 sr_no_br: 833 280 00 sr_no_br_cl: 83328000 sr_cl: BENNING83328000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type LR44 Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 100 µF Max. frequency 5000 kHz Max. resistance 40 MOhm n: BENNING MM P3 pocket-sized digital multimeter - 833 280 00 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Pocket-sized digital multimeter Top functionality and design Even smaller, slimmer and lighter (130 g) Minimum dimensions: 132 x 86 x 19 mm Ideal for service, hobby and professional measuring tasks Key features Measuring range V/DC min. 0.1 mV - max. 600 V Measuring range V/AC min. 0.1 mV - max. 600 V Measuring range resistance 0.1 Ohm - 40 MOhm Measuring range capacitance 10 nF - 100 µF Measuring range frequency 0.001 Hz - 5 MHz Internal DC resistance 10 MOhm Internal AC resistance 10 MOhm Basic accuracy (±) % 0.6% Measurement category: CAT II 600 V, CAT III 300 V Measuring range V/AC: 0.1 mV - 600 V/DC: 0.1 mV - 600 V Basic accuracy (±) %: 0.6% Ultra compact Auto-Range Standard measurement ranges: AC/DC, frequency, resistance, diode, Acoustic Transit Tester, capacitance Special functions: Hold, Relative and duty cycle ds: dsc: Scope of delivery Digital multimeter in pocket format Set of measuring leads red/black 2 button cells (LR44) Leather case kts: pocket-sized digital multimeter kpn: MM P3 kpn_dash: kpn_clear: MMP3 bkpn: BENNING MM P3 bkpn_clear: BENNING MMP3 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Benning / Benning tools / Benning measuring and inspection technique / Benning digital measuring and inspection instruments / Benning digital measuring instruments / Benning multimeter sr_no_br_cl_ns: 83328000 sr_ns: BENNING83328000
r: 02049402 p: 32.922 pid: 178108 b: BENNING q: 0 st: lt: 12 ean: 4014651501560 sr: BENNING PI8081 sr_no_br: PI8081 sr_no_br_cl: PI8081 sr_cl: BENNINGPI8081 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 400 V Measurement temperature No Digital No Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement No Measurement voltage Yes n: BENNING DUTEST PRO continuity and voltage meter - PI8081 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Continuity and wiring testers for high- and low-ohmic resistance testing Throughput and semiconductor test via LEDs and powerful test buzzer Optical display via 3 LED levels: 0 - 100 ohm/1kohm/10 kohm Sound signal of test buzzer up to approx. 100 ohms External voltage display: 6 V - 400 V (LEDs/test buzzer) Polarity test, single-pole external conductor test (phase) and non-contact wire breakage detector Very sharp and bright LED torch Individual setting of the buzzer volume and brightness of the LED torch Integrated magnetic holder and belt clip on the back of the housing Battery operation: 3 x 1.5 V Mignon / AA/ LR06 ds: dsc: kts: continuity and voltage meter kpn: DUTEST PRO kpn_dash: kpn_clear: DUTESTPRO bkpn: BENNING DUTEST PRO bkpn_clear: BENNING DUTESTPRO c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Benning / Benning tools / Benning measuring and inspection technique / Benning digital measuring and inspection instruments / Benning digital measuring instruments / Benning multimeter sr_no_br_cl_ns: PI8081 sr_ns: BENNINGPI8081
r: 02265461 p: 328 pid: 96498 b: FLUKE q: 0 st: lt: 12 ean: sr: FLUKE 4152643 sr_no_br: 4152643 sr_no_br_cl: 4152643 sr_cl: FLUKE4152643 sr_dash: sold: 112504 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE STROOMTANG 400A TRMS AC FLUKE-325 multimeter with current clamp 400A AC/DC - 600V AC/DC - 4152643 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 323, 324 and 325, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 325 also offers measurement functions for DC current and frequency. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC and DC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kOhm with loop-through test Temperature and capacitance measurement Frequency measurement ds: dsc: Scope of delivery 325 True-RMS current clamp Measurement leads Carrying case User manual kts: multimeter with current clamp 400A AC/DC - 600V AC/DC kpn: STROOMTANG 400A TRMS AC FLUKE-325 kpn_dash: STROOMTANG 400A TRMS AC FLUKE kpn_clear: STROOMTANG400ATRMSACFLUKE325 bkpn: FLUKE STROOMTANG 400A TRMS AC FLUKE-325 bkpn_clear: FLUKE STROOMTANG400ATRMSACFLUKE325 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 4152643 sr_ns: FLUKE4152643
r: 02827019 p: 387 pid: 70918 b: FLUKE q: 0 st: lt: 5 ean: 0095969854030 sr: FLUKE 4910257 sr_no_br: 4910257 sr_no_br_cl: 4910257 sr_cl: FLUKE4910257 sr_dash: sold: 45279 p_range: none type: standard act: 1 avo: av: n: FLUKE TESTER ELEKTRISCH 1000V T6-1000 2XAA Electrical tester - 4910257 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke T6 is the perfect 'all-in-one' tool for troubleshooting, maintenance and service. Fault finding in electrical systems can be time-consuming and potentially dangerous as it requires access to metal contact points. With the latest Fluke T6 electrical testers, reliable True RMS measurements can now be made in congested junction boxes or along conductors with inaccessible endpoints. This saves time, eliminates potential errors and significantly reduces the risk of arc discharge. The robust testers have the safety specification 1000 V CAT III and 600 V CAT IV and feature an easy-to-read backlit display. FieldSense technology FieldSense With Fluke's FieldSense technology, you can now take measurements quickly and easily by sliding the open fork over a conductor to see the voltage level without using test leads.* *Requires a capacitive earth connection, provided by the user in most applications. In some situations, grounding via the test lead is required. How to use your new Fluke T6 Learn how to use your new T6 with revolutionary 'Field Sense' technology and get the best out of your tester. Keep the following hints in mind when using the instrument. Measure voltage and current at the same time. How does FieldSense technology work? With a capacitive sensor, a voltage signal is measured via the user's hand in relation to earth, without any electrical contact or galvanic connection and completely isolated! The sensor area of the tester must be close to the measured signal on a live conductor. In this case, both the user's hand and body provide a connection to earth. The electric field (voltage) and magnetic field (current) are recorded. If the earth connection is missing, an earth symbol is shown on the display of the T6. In some cases, measuring leads must be used: When the hand or human body is isolated from earthing (e.g. By safety gloves) or when the human body is not in contact with the earth ground (e.g. on upper floors in wooden houses), contact with the earth ground must be made by connecting the black test lead (COM) to the earth ground. Main product features FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage+ Simultaneous display of voltage and current - displays all power measurements at a glance for efficient troubleshooting 1 to 1000 V AC or DC (T6-1000) 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 100 kOhm Frequency measurement 45 Hz to 66 Hz Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to four years by registering the product within 45 days of purchase Key features: Measure voltage and current simultaneously, without test leads! Safer working: Measure voltage up to 1000 V AC via the open fork, without measuring leads. Faster work: No need to open covers or remove wire nuts. More efficient work: Measure voltage and current simultaneously. Work anywhere: The 17.8 mm open fork is the widest in the industry; it measures up to 200 A at 120 mm2. ds: dsc: kts: Electrical tester kpn: TESTER ELEKTRISCH 1000V T6-1000 2XAA kpn_dash: TESTER ELEKTRISCH 1000V T6 kpn_clear: TESTERELEKTRISCH1000VT610002XAA bkpn: FLUKE TESTER ELEKTRISCH 1000V T6-1000 2XAA bkpn_clear: FLUKE TESTERELEKTRISCH1000VT610002XAA c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4910257 sr_ns: FLUKE4910257
r: 02105533 p: 528 pid: 96416 b: FLUKE q: 0 st: lt: 8 ean: 0095969498173 sr: FLUKE 3469334 sr_no_br: 3469334 sr_no_br_cl: 3469334 sr_cl: FLUKE3469334 sr_dash: sold: 17952 p_range: none type: standard act: 1 avo: av: n: FLUKE 233 multimeter with remote display - 3469334 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new Fluke 233 digital true-RMS multimeter with remote display lets you be in two places at once. It gives you ultimate flexibility in unusual measurement scenarios. Place the detachable display where you can see it, then take the meter to a spot that is convenient for you ? no more fumbling with cords and the meter while trying to reach inaccessible places. You can now take measurements in hard-to-reach places, in locations where machines or panels are physically separated from an end or disconnect switch, or in places where the user is not allowed to go, such as clean rooms or explosive environments. Key features True-RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 50 kHz Thanks to a built-in thermometer, you can easily take temperature measurements without having to carry a separate instrument. Resistance measurement, loop-through and diode test Low-power wireless technology allows you to read the display up to 10 metres from the measurement point, offering extra flexibility. No interference with measurements The removable magnetic display can easily be placed where it can be easily read Measurements can be made without having to hold the meter, allowing users to have a better view of their measurement probes and also making electrical measurements even safer. Suitable for use as a conventional multimeter when the display is connected The transmitter is automatically switched off when the display is connected to the meter. Automatic switch-off for maximum battery life Min/Max and Average recording for automatic recording of variations Call-through and diode test Easy-to-read display with large digits and bright background lighting Battery life: approximately 400 hours ds: dsc: Scope of delivery 233 multimeter Test leads Crocodile clips 80BK-A temperature probe User's manual CD-ROM AA batteries kts: multimeter with remote display kpn: 233 kpn_dash: kpn_clear: 233 bkpn: FLUKE 233 bkpn_clear: FLUKE 233 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3469334 sr_ns: FLUKE3469334
r: 02332422 p: 237 pid: 95740 b: FLUKE q: 0 st: lt: 10 ean: 0095969623759 sr: FLUKE 4152637 sr_no_br: 4152637 sr_no_br_cl: 4152637 sr_cl: FLUKE4152637 sr_dash: sold: 15168 p_range: none type: standard act: 1 avo: av: n: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-324 TRMS current clamp 400A AC and 600V AC/DC - 4152637 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 324, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 324 model can also measure temperature and capacitance. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 4 k? with through-bell test Temperature and capacitance measurement ds: dsc: Scope of delivery 324 True-RMS current clamp Measurement leads Carrying case User manual kts: TRMS current clamp 400A AC and 600V AC/DC kpn: MULTIMETER/TANG TRUE RMS FLUKE-324 kpn_dash: MULTIMETER/TANG TRUE RMS FLUKE kpn_clear: MULTIMETERTANGTRUERMSFLUKE324 bkpn: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-324 bkpn_clear: FLUKE MULTIMETERTANGTRUERMSFLUKE324 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4152637 sr_ns: FLUKE4152637
r: 02954004 p: 940 pid: 72137 b: FLUKE q: 0 st: lt: 13 ean: sr: FLUKE 3610452 sr_no_br: 3610452 sr_no_br_cl: 3610452 sr_cl: FLUKE3610452 sr_dash: sold: 8460 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. frequency 0,5 kHz n: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-381 True-RMS-AC/DC current clamp with removable display and iFlex - 3610452 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 381 offers everything you would expect from a current clamp, and is also equipped with a removable display for even more flexibility. One technician can now perform work that would normally require two workers. Clamp the Fluke 381 around a conductor, detach the display and move around the room to operate the various functions or remove protective devices, while viewing readings in real time. The iFlex flexible current clamp (included) extends the measurement range up to 2500 A AC, providing greater display flexibility, allowing measurements to be made on differently sized conductors and easier access to wires. Key features Wireless technology allows you to read the display up to 10 metres from the measurement point, offering additional flexibility without compromising measurement accuracy. The removable magnetic display can easily be placed where it can be easily read iFlex flexible current clamp, extending the measuring range up to 2500 A AC CAT IV 600 V, CAT III 1000 V Integrated low-pass filter and advanced signal processing for use in environments where electrical disturbances occur, resulting in stable readings. Fluke proprietary inrush current measurement technology that allows noise to be filtered out of the circuit and the inrush current of motors to be recorded exactly as determined by the circuit protection. With its ergonomic design, the current clamp sits well in the hand and can be used when wearing protective equipment. The transmitter automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case ds: dsc: Scope of delivery Fluke 381 True-RMS current clamp with detachable display and iFlex iFlex flexible current clamp, 18 inch Laminated instruction card Safety data sheet Carrying case TL75 test leads Five AAA alkaline batteries kts: True-RMS-AC/DC current clamp with removable display and iFlex kpn: MULTIMETER/TANG TRUE RMS FLUKE-381 kpn_dash: MULTIMETER/TANG TRUE RMS FLUKE kpn_clear: MULTIMETERTANGTRUERMSFLUKE381 bkpn: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-381 bkpn_clear: FLUKE MULTIMETERTANGTRUERMSFLUKE381 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3610452 sr_ns: FLUKE3610452
r: 02953985 p: 704 pid: 73514 b: FLUKE q: 0 st: lt: 8 ean: sr: FLUKE 4695932 sr_no_br: 4695932 sr_no_br_cl: 4695932 sr_cl: FLUKE4695932 sr_dash: sold: 7040 p_range: none type: standard act: 1 avo: av: n: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-375 FC True-RMS AC/DC current clamp - 4695932 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 375 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Log measurements and record their trends for intermittent fault detection Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safely out of the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 375 FC is the direct successor to the Fluke 375 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Record intermittent failures while performing other tasks, thanks to the Fluke 375 FC's logging capabilities Create and share reports from location via email, or make real-time calls with the ShareLive video call feature Fit the iFlex flexible current clamp; use it to extend the measurement range up to 2500 A AC; the flexible current clamp provides access to thick conductors in tight spaces Suitable for the magnetic TPAK suspension strap Integrated low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 600 A AC and DC current measurement 2500 A AC current measurement with (optional) iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurement of non-linear signals Frequency measurement up to 500 Hz with both jaws and iFlex Resistance measurement up to 60 kOhm with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations Measuring range of 500 mV DC for use with other accessories 1000µF capacitance measurement ds: dsc: kts: True-RMS AC/DC current clamp kpn: MULTIMETER/TANG TRUE RMS FLUKE-375 FC kpn_dash: MULTIMETER/TANG TRUE RMS FLUKE kpn_clear: MULTIMETERTANGTRUERMSFLUKE375FC bkpn: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-375 FC bkpn_clear: FLUKE MULTIMETERTANGTRUERMSFLUKE375FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695932 sr_ns: FLUKE4695932
r: 02953986 p: 599 pid: 71302 b: FLUKE q: 0 st: lt: 8 ean: sr: FLUKE 4696001 sr_no_br: 4696001 sr_no_br_cl: 4696001 sr_cl: FLUKE4696001 sr_dash: sold: 5391 p_range: none type: standard act: 1 avo: av: n: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-374 FC True-RMS AC/DC current clamp - 4696001 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 374 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Record trends of measurements and detect intermittent faults, by connecting your meter to your phone via the Fluke Connect Measurements app Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safe outside the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 374 FC is the direct successor to the Fluke 374 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Create and share reports from location via email, or make real-time calls with the ShareLive video call feature Compatible with the iFlex flexible current clamp; use it to extend the measurement range up to 2500 A AC; the flexible current clamp provides access to thick conductors in tight spaces Suitable for the magnetic TPAK suspension strap Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 600 A AC and DC current measurement 2500 A AC current measurement with (optional) iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurements on non-linear signals Resistance measurement up to 6000 Ohms with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations 1000µF capacitance measurement ds: dsc: kts: True-RMS AC/DC current clamp kpn: MULTIMETER/TANG TRUE RMS FLUKE-374 FC kpn_dash: MULTIMETER/TANG TRUE RMS FLUKE kpn_clear: MULTIMETERTANGTRUERMSFLUKE374FC bkpn: FLUKE MULTIMETER/TANG TRUE RMS FLUKE-374 FC bkpn_clear: FLUKE MULTIMETERTANGTRUERMSFLUKE374FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4696001 sr_ns: FLUKE4696001
r: 02065430 p: 381 pid: 10011 b: FLUKE q: 0 st: lt: 8 ean: 0095969559836 sr: FLUKE 3790564 sr_no_br: 3790564 sr_no_br_cl: 3790564 sr_cl: FLUKE3790564 sr_dash: sold: 4572 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 600 V n: FLUKE 373/E True-RMS-AC current clamp - 3790564 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new Fluke 373 current clamp offers improved performance, making it ideal for all applications where only AC current measurements are made. The Fluke 373 is equipped with a True-RMS measurement function for AC voltage and current and a measurement function for resistances up to 6000 ? with call-through test. So this instrument is everything you need, plus a little more. Key features 600 A AC current measurement with fixed jaw 600 V AC and DC voltage measurement Advanced signal processing for use in environments where electrical disturbances occur, resulting in stable measured values CAT IV 300 V, CAT III 600 V True-RMS AC voltage and current for accurate measurements on non-linear signals The large, easy-to-read backlit display automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case Safety standards EN/IEC 61010-1:2001; 600 V CAT III, 300 V CAT IV ds: dsc: Scope of delivery Fluke 373 True-RMS-AC current clamp Laminated instruction card Safety data sheet Carrying case TL75 test leads Two AA alkaline batteries kts: True-RMS-AC current clamp kpn: 373/E kpn_dash: kpn_clear: 373E bkpn: FLUKE 373/E bkpn_clear: FLUKE 373E c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3790564 sr_ns: FLUKE3790564
r: 02950121 p: 112.5 pid: 21143 b: STANLEY q: 0 st: lt: 6 ean: 3253560774196 sr: STANLEY FMHT0-77419 sr_no_br: FMHT0-77419 sr_no_br_cl: FMHT077419 sr_cl: STANLEYFMHT077419 sr_dash: STANLEY FMHT0 sold: 787.5 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: av: Product Range Stanley Fatmax n: STANLEY FMHT0-77419 FATMAX multimeter cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: STANLEY FATMAX Multi Meter Characteristics: Voltage AC / DC :600V Continuity : <30O Current : C / DC : 10A Resistance : 40M? Diode check 3.0V/0.8mA Multimeter with 7 functions Cat III ds: dsc: kts: FATMAX multimeter kpn: FMHT0-77419 kpn_dash: FMHT0 kpn_clear: FMHT077419 bkpn: STANLEY FMHT0-77419 bkpn_clear: STANLEY FMHT077419 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Stanley / Stanley tools / Stanley measuring and inspection technique / Stanley digital measuring and inspection instruments / Stanley digital measuring instruments / Stanley multimeter | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: FMHT077419 sr_ns: STANLEYFMHT0-77419
r: 03342477 p: 379 pid: 158586 b: FLUKE q: 0 st: lt: 7 ean: 0195112129104 sr: FLUKE 6016671 sr_no_br: 6016671 sr_no_br_cl: 6016671 sr_cl: FLUKE6016671 sr_dash: sold: 758 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type E Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 9999 µF Max. frequency 100 kHz Max. resistance 40 MOhm n: FLUKE 117/C11XT/TPAK digital multimeter with magnetic hanging clip in protective EVA tool case - 6016671 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Multimeter with non-contact voltage detector for electricians Designed by electricians. Manufactured by Fluke. Compact True-RMS meter for commercial applications. The ideal meter for high-demand buildings such as commercial premises, hospitals and schools. Non-contact voltage detection function for faster work. Key features VoltAlert technology for non-contact voltage detection AutoVolt automatic selection of AC/DC voltage Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments True-rms for accurate measurements at non-linear loads Measures 20 A (momentary up to 30 seconds, 10 A continuous) Resistance, continuity, frequency and capacitance Provides Min/Max/Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) for hands-free use Safety specification CAT III 600 V ds: dsc: Scope of delivery 117 multimeter C11XT protective EVA tool bag TPAK magnetic hanging clip kts: digital multimeter with magnetic hanging clip in protective EVA tool case kpn: 117/C11XT/TPAK kpn_dash: kpn_clear: 117C11XTTPAK bkpn: FLUKE 117/C11XT/TPAK bkpn_clear: FLUKE 117C11XTTPAK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6016671 sr_ns: FLUKE6016671
