r: 41010847 p: 97.477 pid: 156493 b: MITUTOYO q: 259 st: 1 lt: 1 ean: 4946368667720 sr: MITUTOYO 500-181-30 sr_no_br: 500-181-30 sr_no_br_cl: 50018130 sr_cl: MITUTOYO50018130 sr_dash: MITUTOYO 500 sold: 107322.177 p_range: none type: standard act: 1 avo: 1 av: Measuring range 0-150 mm Reading 0,01 mm mm Jaws length 40 mm n: MITUTOYO 500-181-30 Digimatic caliper standard design 0-150 mm cn: CALIPER cn2: CALIPER cn_clear: CALIPER d: Product description: These Digimatic calipers enable reliable measurement and offer you the following benefits: Now equipped with the same AOS (Advanced Onsite Sensor) induction model encoder used in the top-end ABS coolant-proof calipers. Thanks to the adoption of the electromagnetic induction model ABS encoder, this caliper can be used without worrying about contamination on the ruler during measurement. The detection signal is not affected by dirt (water, oil, etc.) on the surface of the ruler. The guide provides smooth, stable and easy use. Character height: 9 mm (reduction of fatigue due to the high-contrast LCD). The ABS (ABSOLUTE) ruler does not require zeroing after switching on, nor does it have a limited response speed. Exceptionally long battery life. ds: dsc: kts: Digimatic caliper standard design 0-150 mm kpn: 500-181-30 kpn_dash: 500 kpn_clear: 50018130 bkpn: MITUTOYO 500-181-30 bkpn_clear: MITUTOYO 50018130 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Caliper | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo caliper sr_no_br_cl_ns: 50018130 sr_ns: MITUTOYO500-181-30
r: 41977635 p: 187 pid: 83279 b: FLUKE q: 8 st: 1 lt: 1 ean: sr: FLUKE 4152628 sr_no_br: 4152628 sr_no_br_cl: 4152628 sr_cl: FLUKE4152628 sr_dash: sold: 102476 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 323 True RMS multimeter with current clamp 400A AC - 600V AC/DC - 4152628 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320-series current clamps the best general-purpose tools for troubleshooting by electricians in commercial premises and private homes. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable boxes. Robust, reliable and accurate. Key features Slim, ergonomic design Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 4 kOhm with loop-through test ds: dsc: Scope of delivery 323 True-RMS current clamp Measurement leads Carrying case User's manual kts: multimeter with current clamp 400A AC - 600V AC/DC kpn: 323 True RMS kpn_dash: kpn_clear: 323TrueRMS bkpn: FLUKE 323 True RMS bkpn_clear: FLUKE 323TrueRMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 4152628 sr_ns: FLUKE4152628
r: 37960626 p: 210.418 pid: 74244 b: FLUKE q: 22 st: 1 lt: 1 ean: 0095969059503 sr: FLUKE 659612 sr_no_br: 659612 sr_no_br_cl: 659612 sr_cl: FLUKE659612 sr_dash: sold: 81221.348 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes Max. current AC/DC 100 A Diode test No Continuity test Yes Measurement Lo-Z No With current clamp Yes Measurement of noise No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes Measurement of electrical capacity No n: FLUKE T5-600 electrical tester up to 600V AC/DC - 100A AC - 659612 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Electrical tester with OpenJaw current Fluke's T5 electrical testers let you test voltage, continuity and current with one compact tool. When using the T5, you only need to select voltage, resistance or current, and the tester does the rest. Thanks to the OpenJaw current, you can check current up to 100 A without interrupting the circuit. The T5's robust test leads can be neatly stowed away in the back of the tester, making it easy to carry in your instrument bag. The detachable SlimReach test probes have been modified to comply with national standards for electrical testers. Optional accessories can be connected to the test leads, such as clamps and special probes. The optional H5 holster allows you to attach the instrument to your belt. Key features Automatically measures AC and DC voltage with accurate digital resolution Displays resistance up to 1000 ohms Easy and accurate OpenJaw current measurement Dial-through test Compact design with handy probe holder Rugged enough to withstand a 3 m drop The removable SlimReach test probes have been modified to meet national standards for electrical testers Fluke test terminals can be connected to the test leads as an accessory Can stay connected much longer than an electromagnetic tester Automatic shutdown to save battery life The optional holster can be attached to a belt and allows neat storage of the test leads Safety standards All inputs of the T5-600 are protected in accordance with EN61010-1 CAT III 600 V. ds: dsc: Scope of delivery Voltage and current probe with a range of 600 V Removable probes of 4 mm Instruction sheet kts: electrical tester up to 600V AC/DC - 100A AC kpn: T5-600 kpn_dash: T5 kpn_clear: T5600 bkpn: FLUKE T5-600 bkpn_clear: FLUKE T5600 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 659612 sr_ns: FLUKE659612
r: 41969709 p: 241.38 pid: 83570 b: FLUKE q: 24 st: 1 lt: 1 ean: 0095969344814 sr: FLUKE 2583583 sr_no_br: 2583583 sr_no_br_cl: 2583583 sr_cl: FLUKE2583583 sr_dash: sold: 75793.32 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Max. current AC/DC 10 A Diode test Yes Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: FLUKE 115 RMS compact multimeter up to 600V AC/DC - 10A AC/DC - 2583583 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians. Manufactured by Fluke. Compact True-RMS meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic test applications. Key features Large display with white LED backlight for use in dimly lit environments Resistance and continuity test Min/Max/Average recording of signal fluctuations Safety specification CAT III 600 V Safety standards All inputs are protected in accordance with CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV and VDE certified. ds: dsc: Scope of delivery 115 digital multimeter Protective yellow snap-on case Installed 9 V battery 4 mm silicone measuring lead set User's manual kts: compact multimeter up to 600V AC/DC - 10A AC/DC kpn: 115 RMS kpn_dash: kpn_clear: 115RMS bkpn: FLUKE 115 RMS bkpn_clear: FLUKE 115RMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 2583583 sr_ns: FLUKE2583583
r: 02293143 p: 317.909 pid: 96505 b: FLUKE q: 24 st: 1 lt: 1 ean: 0095969344852 sr: FLUKE 2583647 sr_no_br: 2583647 sr_no_br_cl: 2583647 sr_cl: FLUKE2583647 sr_dash: sold: 54680.348 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Max. current AC/DC 10 A Diode test Yes Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 50 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: FLUKE 117 compact RMS multimeter with non-contact voltage detector for electricians up to 600V AC/DC - 10A AC/DC - 2583647 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 117 multimeter with non-contact voltage detector for electricians Designed by electricians. Manufactured by Fluke. Compact True-rms meter for commercial applications. The Fluke 117 is the ideal meter for high-demand buildings such as commercial buildings, hospitals and schools. The 117 has a non-contact voltage detection feature for faster work. Key features VoltAlert technology for non-contact voltage detection AutoVolt automatic selection of AC/DC voltage Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments True-rms for accurate measurements at non-linear loads Measures 20 A (momentary up to 30 seconds, 10 A continuous) Resistance, continuity, frequency and capacitance Provides Min/Max/Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) for hands-free use Safety specification CAT III 600 V ds: dsc: Scope of delivery 117 multimeter 4 mm silicone test lead set Protective yellow snap-on case User's manual kts: compact RMS multimeter with non-contact voltage detector for electricians up to 600V AC/DC - 10A AC/DC kpn: 117 kpn_dash: kpn_clear: 117 bkpn: FLUKE 117 bkpn_clear: FLUKE 117 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583647 sr_ns: FLUKE2583647
r: 37960698 p: 333.611 pid: 72987 b: FLUKE q: 40 st: 1 lt: 1 ean: 0095969095921 sr: FLUKE 1592901 sr_no_br: 1592901 sr_no_br_cl: 1592901 sr_cl: FLUKE1592901 sr_dash: sold: 45704.707 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm Measurement of electrical capacity Yes n: FLUKE 175 EGFID Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 1592901 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 175 digital multimeter True RMS. The new multimeter standard The three models in the new 170 series are the new standard for general purpose multimeters. They set the standard by incorporating aspects such as accuracy, functionality, ease of use, safety and reliability. Key features True RMS voltage and current value measurements Basic accuracy of 0.15% Resolution 6000 counts Digital display with analogue bargraph and backlighting Manual and automatic range setting Display Hold and Auto Hold Frequency and capacitance measurement Resistance measurement, dial-through and diode test Min/Max/Average recording Smoothing for more stable reading of rapidly fluctuating input signals Easy battery replacement without opening the housing Calibration with closed housing via the front panel Ergonomic housing with integrated protective holster EN61010-1 CAT III 1000 V / CAT IV 600 V Measures twice as fast as other multimeters Safety standards All inputs are protected in accordance with EN61010-1 CAT IV 600V/CAT III 1000V. CSA and TÜV certified. ds: dsc: Scope of delivery 9V battery installed Measurement leads Operating instructions kts: Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC kpn: 175 EGFID kpn_dash: kpn_clear: 175EGFID bkpn: FLUKE 175 EGFID bkpn_clear: FLUKE 175EGFID c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 1592901 sr_ns: FLUKE1592901
r: 02060786 p: 168.652 pid: 95603 b: FLUKE q: 4 st: 1 lt: 1 ean: 0095969436298 sr: FLUKE 3088053 sr_no_br: 3088053 sr_no_br_cl: 3088053 sr_cl: FLUKE3088053 sr_dash: sold: 43849.52 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance No Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF n: FLUKE 113 RMS compact digital multimeter with VCHEK - 3088053 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 113 digital multimeter allows users to perform basic meter settings and connection tests quickly and easily. This measuring instrument is extremely user-friendly and has the features you need to solve most electrical problems. The Fluke 113 offers significant improvements over other digital multimeters on the market, including the Fluke model 7-600. Using Fluke's VCHEK LoZ low impedance measurement function, users can make voltage measurements and continuity tests simultaneously. Low-impedance LoZ measurements also block phantom voltages caused by nearby conductors. Keep in mind that low-impedance LoZ measurements cause a low load on a circuit protected by a residual current device, which may cause the residual current device to trip. The Min/Max function allows you to record signal fluctuations. Suitable for diode testing, the Fluke 113 has both automatic and manual range settings. With features such as compliance with the latest safety standards, backlighting and a much larger, easier-to-read display, this measuring instrument is a must-have for any toolbox. Key features VCHEK LoZ low impedance measurement function for simultaneous voltage measurement and continuity testing True RMS for accurate AC measurements with non-linear loads Large backlit display ensures good readability even in poor lighting conditions Register signal fluctuations with the Min/Max function Diode test for testing universal germanium, silicon and power diodes Integrated holster with probe holders for easy storage Automatic and manual range adjustment for additional user functionality Instrument complies with CAT III 600 V and CAT IV 300 V safety categories for increased safety With the optional magnetic TPAK hanging clip, the user has both hands free ds: dsc: Scope of delivery 113 digital multimeter TL75 test leads Protective yellow snap-on sheath Operating manual 9V battery (already installed) kts: compact digital multimeter with VCHEK kpn: 113 RMS kpn_dash: kpn_clear: 113RMS bkpn: FLUKE 113 RMS bkpn_clear: FLUKE 113RMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 3088053 sr_ns: FLUKE3088053
r: 02339049 p: 172.071 pid: 95306 b: FLUKE q: 11 st: 1 lt: 1 ean: 0095969599696 sr: FLUKE 4016961 sr_no_br: 4016961 sr_no_br_cl: 4016961 sr_cl: FLUKE4016961 sr_dash: sold: 42501.537 p_range: none type: standard act: 1 avo: 1 av: Min. voltage 6 V Max. voltage 690 V n: FLUKE T130 two-pole voltage and continuity tester with LCD, switchable load - 4016961 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Product description Fluke T130 voltage/doorbell tester with large, easy-to-use buttons, a bright LED indicator and backlit LCD display, Display Hold function and clearly audible and vibrating switchable load Fluke's new two-pole voltage and continuity testers are adapted to your own working methods. You won't find this combination of safety, ease of use and fast measurement results anywhere else. Designed according to IEC EN 61243-3:2014 to check for the absence of voltage even with dead batteries. Safety specification CAT IV 600 V, CAT III 690 V Presence of voltage indicated by: acoustic signal, LED indicator, digital display and vibration indicator ds: dsc: kts: two-pole voltage and continuity tester with LCD, switchable load kpn: T130 kpn_dash: kpn_clear: T130 bkpn: FLUKE T130 bkpn_clear: FLUKE T130 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Voltage tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke voltage tester | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools voltage tester | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 4016961 sr_ns: FLUKE4016961
r: 37960630 p: 266.451 pid: 72981 b: FLUKE q: 7 st: 1 lt: 1 ean: 0095969059466 sr: FLUKE 659570 sr_no_br: 659570 sr_no_br_cl: 659570 sr_cl: FLUKE659570 sr_dash: sold: 31174.767 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 100 A Continuity test Yes Measurement Lo-Z No Diode test No Measurement of noise No Measurement of electrical capacity No Measurement voltage Yes Current measurement Yes Measurement resistance No Measurement frequency No n: FLUKE T5-1000 electrical tester up to 1000V AC/DC - 100A AC - 659570 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Electrical tester with OpenJaw current Fluke's T5 electrical testers let you test voltage, continuity and current with one compact tool. When using the T5, you only need to select voltage, resistance or current, and the tester does the rest. Thanks to the OpenJaw current, you can check current up to 100 A without interrupting the circuit. The T5's robust test leads can be neatly stowed away in the back of the tester, making it easy to carry in your instrument bag. The detachable SlimReach test probes have been modified to comply with national standards for electrical testers. Optional accessories can be connected to the test leads, such as clamps and special probes. The optional H5 holster allows you to attach the instrument to your belt. Key features Automatically measures AC and DC voltage with accurate digital resolution Displays resistance up to 1000 ohms Easy and accurate OpenJaw current measurement Dial-through test Compact design with handy probe holder Robust enough to withstand a 3 m drop The removable SlimReach test probes have been modified to comply with national standards for electrical testers Fluke test terminals can be connected to the test leads as an accessory Can stay connected much longer than an electromagnetic tester Automatic shutdown to save battery life The optional holster can be attached to a belt and allows neat storage of the test leads Safety standards All inputs of the T5-1000 are protected in accordance with EN61010-1 1000 V CAT III. ds: dsc: Scope of delivery Voltage, continuity and current tester with a range of 1000 V Removable probes of 4 mm Instruction sheet kts: electrical tester up to 1000V AC/DC - 100A AC kpn: T5-1000 kpn_dash: T5 kpn_clear: T51000 bkpn: FLUKE T5-1000 bkpn_clear: FLUKE T51000 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 659570 sr_ns: FLUKE659570
r: 41972786 p: 466.669 pid: 83271 b: FLUKE q: 12 st: 1 lt: 1 ean: 0095969095860 sr: FLUKE 1592842 sr_no_br: 1592842 sr_no_br_cl: 1592842 sr_cl: FLUKE1592842 sr_dash: sold: 28933.478 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm Measurement of electrical capacity Yes n: FLUKE 179 EGFID Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 400°C - 1592842 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 179 digital multimeter True RMS. The new multimeter standard The three models in the new 170 series are the new standard for general purpose multimeters. They set the standard by incorporating aspects such as accuracy, functionality, ease of use, safety and reliability. Key features True RMS voltage and current value measurements Basic accuracy of 0.09% Resolution 6000 counts Digital display with analogue bargraph and backlighting Manual and automatic range setting Display Hold and Auto Hold Frequency and capacitance measurement Resistance measurement, continuity and diode test Temperature measurements Min/Max/Average recording Smoothing for more stable reading of rapidly fluctuating input signals Easy battery replacement without opening the housing Calibration with closed housing via the front panel Ergonomic housing with integrated protective holster EN61010-1 CAT III 1000 V / CAT IV 600 V Measures twice as fast as other multimeters Safety standards All inputs are protected in accordance with EN61010-1 CAT IV 600V/CAT III 1000V. CSA and TÜV certified. ds: dsc: Scope of delivery 80BK temperature probe 9V battery installed Test leads Operating instructions kts: Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 400°C kpn: 179 EGFID kpn_dash: kpn_clear: 179EGFID bkpn: FLUKE 179 EGFID bkpn_clear: FLUKE 179EGFID c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 1592842 sr_ns: FLUKE1592842
r: 41977750 p: 714.444 pid: 84706 b: FLUKE q: 10 st: 1 lt: 1 ean: 0095969288675 sr: FLUKE 2427890 sr_no_br: 2427890 sr_no_br_cl: 2427890 sr_cl: FLUKE2427890 sr_dash: sold: 28577.76 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1507 insulation tester - test voltage from 50V-100V-250V-500V-1000V - 2427890 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description The Fluke 1507 and 1503 insulation testers are compact, rugged, reliable and easy to use. Thanks to different test voltages, they are ideal for many troubleshooting, commissioning and preventive maintenance applications. Additional features, such as the remote probe of these instruments, save both time and money when performing tests. Save time and money with the automatic calculation of polarisation index and dielectric absorption ratio (only available on the 1507) Make repeated testing easy with the 1507's comparison (pass/fail) function (available only on the 1507) Performing repeated tests or tests in hard-to-reach places is easy with the remote measurement probe. Detection of live circuits prevents, for added user safety, insulation tests at voltages > 30 V Automatic discharge of capacitive voltages for extra user safety AC/DC voltage: 0.1 V to 600 V Continuity test: 200 mA Resistance: 0.01 Ohm to 20.00 kOhm Longer battery life thanks to automatic switch-off Easy to read measured values thanks to large, illuminated display Overvoltage category CAT IV 600 V for additional user protection Remote probe, test leads, probes and crocodile clips are supplied with each tester Suitable for optional Fluke TPAK magnetic pendant system leaving your hands free for other work Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests One year warranty Insulation test range 1507: 0.01 MOhm to 10 GOhm 1503: 0.1 MOhm to 2000 MOhm Insulation test voltages 1507: 50 V, 100 V, 250 V, 500 V, 1000 V 1503: 500 V, 1000 V ds: dsc: Scope of delivery Probe with remote control Measuring leads Measuring probes Alligator clips Holster User manual kts: insulation tester - test voltage from 50V-100V-250V-500V-1000V kpn: 1507 kpn_dash: kpn_clear: 1507 bkpn: FLUKE 1507 bkpn_clear: FLUKE 1507 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 2427890 sr_ns: FLUKE2427890
r: 02660358 p: 161.299 pid: 122591 b: BOSCH q: 2 st: 1 lt: 1 ean: 3165140798860 sr: BOSCH 0601076600 sr_no_br: 0601076600 sr_no_br_cl: 0601076600 sr_cl: BOSCH0601076600 sr_dash: sold: 28227.325 p_range: none type: standard act: 1 avo: 1 av: Length 400 mm Accuracy ± 0,1 ° Slope indicator Yes Number of vials 2 Magnetic No Measuring range 0-220 ° n: BOSCH GAM 220 MF goniometer and spirit level - 0601076600 cn: ANGLE GAUGE cn2: ANGLE GAUGE cn_clear: ANGLEGAUGE d: Product description Rapid determination of mitre angles Angle indicator and spirit level GAM 220 MF Quick calculation and transfer of angles thanks to memory function for frequently used angle dimensions Automatic calculation of simple and double cap and mitre angles without additional aids Optimal readability thanks to the rotatable, illuminated display Hold function for storing and transferring measurement results at the touch of a button Mechanical locking screw for precise transfer of angles Robust and compact design with IP 54 protection No calibration required Advantages Fast determination of mitre angles ds: dsc: Scope of delivery 4x battery 1.5V LR6 (AA) Storage pouch Leg extension kts: goniometer and spirit level kpn: GAM 220 MF kpn_dash: kpn_clear: GAM220MF bkpn: BOSCH GAM 220 MF bkpn_clear: BOSCH GAM220MF c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Angle gauge | Home / Our brands / Bosch / Bosch tools / Bosch measuring and inspection technique / Bosch digital measuring and inspection instruments / Bosch digital measuring instruments / Bosch angle gauge | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools angle level | Home / Promotions / Promotions / Black friday / Bosch black friday / Bosch black friday tools sr_no_br_cl_ns: 0601076600 sr_ns: BOSCH0601076600
r: 02951005 p: 221.876 pid: 73242 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969344791 sr: FLUKE 2583552 sr_no_br: 2583552 sr_no_br_cl: 2583552 sr_cl: FLUKE2583552 sr_dash: sold: 28178.252 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Diode test No Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency No Measurement resistance Yes Current measurement No Measurement voltage Yes Max. resistance 40 MOhm Measurement of electrical capacity No n: FLUKE 114 Compact electrical RMS multimeter up to 600V AC/DC - 2583552 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians - Manufactured by Fluke. Compact True-rms meter for troubleshooting electrical installations. The Fluke 114 is the tool of choice for troubleshooting 'go/no-go' testing. The meter has a special function to prevent erroneous readings due to phantom voltage. Key features AutoVolt: automatic selection of AC/DC voltage Large display with white LED backlight for use in dimly lit environments Resistance and continuity test Min/Max/Average recording of signal fluctuations Safety specification CAT III 600 V Safety standards All inputs are protected in accordance with CE, IEN61010-1 CAT III 600V. ds: dsc: Scope of delivery 114 digital multimeter Protective yellow snap-on case Installed 9 V battery 1 pair of measuring leads User's manual kts: Compact electrical RMS multimeter up to 600V AC/DC kpn: 114 kpn_dash: kpn_clear: 114 bkpn: FLUKE 114 bkpn_clear: FLUKE 114 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583552 sr_ns: FLUKE2583552
r: 02250665 p: 397.319 pid: 94548 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969559874 sr: FLUKE 3790607 sr_no_br: 3790607 sr_no_br_cl: 3790607 sr_cl: FLUKE3790607 sr_dash: sold: 26620.373 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 200 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 365 True-RMS-AC current clamp with removable jaw - 3790607 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 365 is a rugged meter perfect for hard-to-reach wires. The 365's thin and small jaw is detachable and has a flexible test lead, making it easier than ever to reach hard-to-reach wires and read the display. Key features 200 A AC and DC current measurement with detachable jaw 600 V AC and DC voltage measurement The removable jaw allows easier access to wires and easier reading of the display Built-in torch provides easy illumination and identification of wires CAT III 600 V Compact design allows the clamp to sit comfortably in the hand and to be used when wearing protective equipment. Advanced signal processing for use in environments where electrical disturbances occur, resulting in stable measured values. The large, easy-to-read backlit display automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case Safety standards EN/IEC 61010-1:2001; 600 V CAT III ds: dsc: Scope of delivery True-RMS-AC current clamp Laminated instruction card Safety data sheet Carrying case TL75 test leads Magnetic hanging strap Two AA alkaline batteries kts: True-RMS-AC current clamp with removable jaw kpn: 365 kpn_dash: kpn_clear: 365 bkpn: FLUKE 365 bkpn_clear: FLUKE 365 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3790607 sr_ns: FLUKE3790607
r: 02953726 p: 1623.429 pid: 72784 b: FLUKE q: 0 st: lt: 26 ean: 0095969766845 sr: FLUKE 4546980 sr_no_br: 4546980 sr_no_br_cl: 4546980 sr_cl: FLUKE4546980 sr_dash: sold: 25974.864 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1663 multifunctional installation tester - 4546980 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description: The ideal tester for hard-working professionals. This instrument is ideal for professional users ? full functionality, advanced measurement capabilities, yet easy to use. Intuitive to operate and easy to master by field technicians of all levels. Key features The 1663 puts more power in your hands by testing quickly and efficiently according to all local regulations. Devices inadvertently connected to the system being tested are protected. Moreover, the 1663 makes it easy to share test results via your smartphone. Measurement functions Passage of inputs L-N, N-PE (phase-neutral, neutral-earth) Testing of RCCBs sensitive to smoothed DC voltage (type B) Earth resistance Voltage and frequency Check of wiring polarity, recognises broken N-wires Insulation resistance Pass-through and resistance Measure motor windings with continuity tests Loop and line resistance Expected earth fault current (PEFC/IK) Expected short-circuit current (PSC/IK) RCCB tripping time RCCB trip value (rise test) Measure tripping time and current for type A and AC RCCBs in one test Variable current of RCCBs Automatic test cycle for RCCBs Phase sequence indication Memory interface Z-max memory Memory Computer interface (if used with optional FlukeView and Fluke DMS software) Time and date (when used with FlukeView software) ds: dsc: Scope of delivery 6 AA batteries (IEC LR6) C1600 carrying case Zeroing function Heavy-duty power cord for one input STD standard measurement lead set Padded carrying and waist strap Quick guide TP165X probe with remote control and cord User guide on CD-ROM kts: multifunctional installation tester kpn: 1663 kpn_dash: kpn_clear: 1663 bkpn: FLUKE 1663 bkpn_clear: FLUKE 1663 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 4546980 sr_ns: FLUKE4546980
r: 02836043 p: 293.062 pid: 70920 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969854108 sr: FLUKE 4910322 sr_no_br: 4910322 sr_no_br_cl: 4910322 sr_cl: FLUKE4910322 sr_dash: sold: 22565.774 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 200 A Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE T6-600 Electrical tester - 4910322 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Measures voltages... without measuring lead Measure voltages up to 600 V AC via the open fork, without measuring lead to contact active voltage. + Without opening covers or removing wire nuts. For wires up to AWG 4/0 (120 mm2), with a load of up to 200 A. It will change your work. Safer. Faster. Easier. Key features: Key product features FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage+ 1 to 600 V AC voltage 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 2000 Ohm Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase ds: dsc: kts: Electrical tester kpn: T6-600 kpn_dash: T6 kpn_clear: T6600 bkpn: FLUKE T6-600 bkpn_clear: FLUKE T6600 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4910322 sr_ns: FLUKE4910322
r: 01052254 p: 1543.866 pid: 96780 b: FLUKE q: 0 st: lt: 14 ean: 0095969475822 sr: FLUKE 3362365 sr_no_br: 3362365 sr_no_br_cl: 3362365 sr_cl: FLUKE3362365 sr_dash: sold: 21614.124 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 773 mA process current clamp - 3362365 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values Measurement of signals from 4 to 20 mA with internal measurement Simultaneous internal measurement of mA with 24V loop power supply for powering and testing transmitters Generation of signals from 4 to 20 mA for testing I/Os or I/Ps of control systems mA output signal linearly increasing or stepped output signal (25% steps) Automatically change the output signal for remote testing from 4 to 20 mA DC voltage measurement to verify 24V power supplies or I/O voltage signals DC voltage source to test input components accepting signals from 1 to 5 V or 0 to 10 V Scaled mA output signal for a continuous mA signal corresponding to the 4 to 20 mA signal measured by the mA clamp Allows logging of mA signals on a separate logging device without interrupting the loop mA output signal for logging the 4 to 20 mA signal by means of a DMM with logging function or another instrument without interrupting the loop mA in/out: simultaneous measurement of the mA signal with the pliers and generation of a mA signal Sending a mA input signal to a device and measuring its output signal of 4 to 20 mA to components such as valves or mA isolating switches Voltage output linearly increasing or stepwise output signal (25% steps) Automatically change the voltage output for remote testing ds: dsc: Scope of delivery Four AA alkaline batteries (installed) Carrying case TL75 measuring leads AC72 detachable clamp TL940 measuring leads with mini-hooks Instruction sheet Hanging system with Velcro strap kts: mA process current clamp kpn: 773 kpn_dash: kpn_clear: 773 bkpn: FLUKE 773 bkpn_clear: FLUKE 773 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 3362365 sr_ns: FLUKE3362365
r: 02951314 p: 593.452 pid: 71312 b: FLUKE q: 0 st: lt: 6 ean: 0095969288668 sr: FLUKE 2427883 sr_no_br: 2427883 sr_no_br_cl: 2427883 sr_cl: FLUKE2427883 sr_dash: sold: 20177.368 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1503 insulation tester - test voltage from 500V-1000V - 2427883 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: The Fluke 1503 insulation tester is compact, robust, reliable and easy to use. Thanks to different test voltages, they are ideal for many troubleshooting, commissioning and preventive maintenance applications. Additional features, such as the remote probe of these instruments, save both time and money when performing tests. Key features Performing repeated tests or tests in hard-to-reach places is easy with the remote probe. Detection of live circuits prevents, for added user safety, insulation testing at voltages > 30 V Automatic discharge of capacitive voltages for extra user safety AC/DC voltage: 0.1 V to 600 V Continuity test: 200 mA Resistance: 0.01 ? to 20.00 k? Longer battery life thanks to automatic switch-off Easy to read measured values thanks to large, illuminated display Overvoltage category CAT IV 600 V for additional user protection A remote probe, test leads, probes and crocodile clips are supplied with each tester Suitable for optional Fluke TPAK magnetic pendant system leaving your hands free for other work Four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests One year warranty Insulation test range 0.1 M? to 2000 M? Insulation test voltages 500 V, 1000 V ds: dsc: Scope of delivery Probe with remote control Measuring leads Measuring probes Alligator clips Holster User manual kts: insulation tester - test voltage from 500V-1000V kpn: 1503 kpn_dash: kpn_clear: 1503 bkpn: FLUKE 1503 bkpn_clear: FLUKE 1503 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 2427883 sr_ns: FLUKE2427883
r: 02765419 p: 775 pid: 72422 b: FLUKE q: 10 st: 1 lt: 1 ean: sr: FLUKE 4695861 sr_no_br: 4695861 sr_no_br_cl: 4695861 sr_cl: FLUKE4695861 sr_dash: sold: 20150 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 376 FC True-RMS-AC/DC current clamp with iFlex - 4695861 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 376 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Log measurements and record their trends for intermittent fault detection Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safe outside the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 376 FC is the direct successor to the Fluke 376 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Record intermittent faults while performing other tasks, thanks to the Fluke 376 FC's logging capabilities Create and share reports from location via email, or make real-time calls with the ShareLive video call feature The iFlex flexible current clamp extends the measurement range to 2500 A AC; it provides access to thick conductors in tight spaces (included) TPAK magnetic suspension strap (included) Integrated low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 1000 A AC and DC current measurement 2500 A AC current measurement with the iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurement of non-linear signals Frequency measurement up to 500 Hz with both jaws and iFlex Resistance measurement up to 60 kOhm with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations Measuring range of 500 mV DC for use with other accessories 1000µF capacitance measurement ds: dsc: kts: True-RMS-AC/DC current clamp with iFlex kpn: 376 FC kpn_dash: kpn_clear: 376FC bkpn: FLUKE 376 FC bkpn_clear: FLUKE 376FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695861 sr_ns: FLUKE4695861
r: 02514184 p: 990.147 pid: 96601 b: FLUKE q: 0 st: lt: 6 ean: 0095969796620 sr: FLUKE 4691215 sr_no_br: 4691215 sr_no_br_cl: 4691215 sr_cl: FLUKE4691215 sr_dash: sold: 19802.94 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1587 FC insulation multimeter - 4691215 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: The high-performance 2-in-1 insulation DMM The Fluke 1587 FC insulation multimeters combine a digital insulation tester with a full-fledged digital true-RMS multimeter in one compact and portable device for optimum versatility in both troubleshooting and preventive maintenance. The Fluke 1587 FC insulation multimeter adds four powerful new diagnostic features with the Fluke Connect Measurements app: Timed PI/DAR ratio tests with TrendIt graphs identify moisture and contaminated insulation problems faster Memory storage via Fluke Connect, eliminating the need to write down results, reducing errors and saving data for later tracking over time Temperature compensation via the app for establishing accurate baselines and relevant historical comparisons Historical tracking of equipment and recording of trends reveals equipment deterioration over time and enables real-time on-site decisions with Fluke Connect Assets Product features Timed PI/DAR ratio tests Detection of live circuits prevents, for added user safety, insulation tests at voltages > 30 V Low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Automatic discharge of capacitive voltages for additional user safety Insulation test (1587 FC: 0.01 MOhm to 2 GOhm) Insulation test voltages (1587 FC: 50 V, 100 V, 250 V, 500 V, 1000 V) for many applications AC/DC voltage, DC in millivolts, AC/DC in milliamps, resistance (Ohm), continuity Capacitance, diode test, temperature, min/max, frequency (Hz) Automatic switch-off for longer battery life Measurement category CAT III 1000 V, CAT IV 600 V Large backlit display Rugged carrying case allows you to carry everything you need for work Accessories included: remote probe, test leads and probes, alligator clips, type K thermocouple Compatible with the optional Fluke TPAK magnetic meter hang clip for convenient hands-free work 3-year standard warranty, extendable to 5 years by registering the product within 45 days of purchase Key features: PI/DAR measurements with TrendIt graphs Memory storage via the Fluke Connect Measurements app Temperature compensation via the Fluke Connect Measurements app Low-pass filter for frequency controlled drives, for accurate measurements on motor drives Insulation test voltages: 50 V, 100 V, 250 V, 500 V, 1000 V Insulation test: 0.01 MOhm to 2.0 GOhm Automatic discharge of capacitive voltages Smoothed reading of insulation test values Frequency Capacitance Diode test Temperature Min/Max AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Pass through Three-year warranty External probe, test leads, alligator clips Thermocouple type K Robust carrying case Automatic switch-off ds: dsc: kts: insulation multimeter kpn: 1587 FC kpn_dash: kpn_clear: 1587FC bkpn: FLUKE 1587 FC bkpn_clear: FLUKE 1587FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 4691215 sr_ns: FLUKE4691215
