r: 08079845 p: 228.104 pid: 73268 b: WIHA q: 4 st: 1 lt: 1 ean: 4010995452193 sr: WIHA 45219 sr_no_br: 45219 sr_no_br_cl: 45219 sr_cl: WIHA45219 sr_dash: sold: 1824.832 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Max. current AC/DC 400 A Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Max. resistance 40 MOhm Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100 µF Max. frequency 5000 kHz Measurement of electrical capacity Yes n: WIHA 45219 current meter up to 1000V AC, CAT IV incl. 2x AAA batteries cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Simplifies your work: Large LCD display with background illumination for easy to read measurement results. Increases your safety: Measure live electrical wires without open contacts. Makes handling easier: Easy one-hand testing without electrical circuit interruption. Increases your efficiency: All measurement functions relevant for electricians in a single measuring device. Simplifies your work: An integrated flashlight function ensures optimal illumination. Increases your process reliability: Precise measurement results thanks to LPF and TRUE-RMS measurement. Dimensions: 110 x 280 x 50 mm Application: For multi-functional use in different application locations. Measuring category: CAT IV 1.000 V Suitable for eMobility Suitable for photovoltaic systems Standards: IEC/EN 61010-1, IP40 1,000 V AC / 1,500 V DC, 400 Amp Safe measuring without direct contact Measuring without interrupting the electrical circuit When working, for example, on electrical systems that cannot be switched off, current measurement is a major challenge. With the measuring caliper from Wiha, the caliper bracket can be used to carry out measurements without interrupting the electrical circuit. Handling is greatly facilitated by the remote single-hand testing. The test tips allow additional tests, voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. This multi-functionality significantly increases the efficiency. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1,000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations. ds: dsc: Scope of delivery 1x clamp meter 2x test leads (1x red, 1x black) 2x batteries AAA 1,5V, IEC LR03 1x instruction manual kts: current meter up to 1000V AC, CAT IV incl. 2x AAA batteries kpn: 45219 kpn_dash: kpn_clear: 45219 bkpn: WIHA 45219 bkpn_clear: WIHA 45219 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Wiha / Wiha tools / Wiha measuring and inspection technique / Wiha digital measuring and inspection instruments / Wiha digital measuring instruments / Wiha multimeter sr_no_br_cl_ns: 45219 sr_ns: WIHA45219
r: 02839967 p: 147.851 pid: 118397 b: MILWAUKEE q: 0 st: lt: 8 ean: 4002395240135 sr: MILWAUKEE 4933427315 sr_no_br: 4933427315 sr_no_br_cl: 4933427315 sr_cl: MILWAUKEE4933427315 sr_dash: sold: 1774.212 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Max. current AC/DC 400 A Battery type AA Automatic shut-off Yes With current clamp Yes Continuity test Yes Measurement Lo-Z No Digital Yes Measurement of noise No Measurement of electrical capacity No Measurement voltage Yes Current measurement Yes Measurement resistance No Measurement frequency No n: MILWAUKEE 2235-40 current clamp - 4933427315 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description TRMS always guarantees accurate readings CAT III 600 V for increased safety Rugged over-moulding increases durability and user grip Built-in LED work light - lights the work area Side mounted dial for one-handed use Thin jaw profile for easier wire measurement in panels or in bundles Supplied with electrical test lead set and 2 x AA batteries ds: MILWAUKEE® Work Hard, Play Hard promotion Receive a FREE radio or speaker ! Promotion valid from March 1 to May 31, 2026. Spend at least €449 excl. VAT on MILWAUKEE® products and receive a free radio or speaker. How does it work? Spend a minimum of €449 excl. VAT on MILWAUKEE® products in March, April or May. Register your purchase via the official promotion page . Registration is possible until June 14, 2026 . The invoice date must be between 01.03.2026 and 31.05.2026 . After approval of your registration, you will receive the radio or speaker within 30 days , shipped directly by Milwaukee. Maximum of 1 radio or speaker per customer per month . Please note: You can only submit one invoice per registration; combining invoices is not possible. Which radio or speaker can you receive? Free M12 SPEJSG2-0 (4933498433) with purchases from €449 excl. VAT. Free M18 SPEJSG2-0 (4933493530) with purchases from €749 excl. VAT. Free M18 RADDAB+ G2-0 (4933492344) with purchases from €1,049 excl. VAT. Free M18 RC-0 (4933446639) with purchases from €1,399 excl. VAT. Free M18 PRCDAB+-0 (4933472112) with purchases from €1,799 excl. VAT. dsc: Supplied as standard 2 x AA Batteries No kitbox or bag supplied 1 x test lead set kts: current clamp kpn: 2235-40 kpn_dash: 2235 kpn_clear: 223540 bkpn: MILWAUKEE 2235-40 bkpn_clear: MILWAUKEE 223540 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee measuring and inspection technique / Milwaukee digital measuring and inspection instruments / Milwaukee digital measuring instruments / Milwaukee multimeter | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee work hard, play hard 2026 sr_no_br_cl_ns: 4933427315 sr_ns: MILWAUKEE4933427315
r: 02951070 p: 440.261 pid: 71959 b: FLUKE q: 0 st: lt: 21 ean: 0095969692052 sr: FLUKE 4401595 sr_no_br: 4401595 sr_no_br_cl: 4401595 sr_cl: FLUKE4401595 sr_dash: sold: 1761.044 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 0,4 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 3000 FC wireless multimeter - 4401595 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Now compatible with Fluke Connect Mobile App Fluke's 3000 FC series wireless multimeter ensures that instruments and not your body are near live electrical dividers. Increase safety and efficiency with this tester. All the facts, right on site. The Fluke 3000 FC True-RMS wireless multimeter with the Fluke Connect app and ShareLive video call function. Accuracy, reliability and ease of use make the Fluke 3000 FC wireless multimeter the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to investigate and troubleshoot many problems in electrical and electronic systems. The Fluke 3000 FC offers you True-RMS voltage and current measurement functions, 6000-count resolution and manual and automatic range setting. It can also perform frequency, capacitance and resistance measurements as well as dial-through and diode tests. In addition, the Fluke 3000 FC offers a higher base accuracy of 0.09%, a digital display showing up to three secondary remote module readings and a bright white backlight. Work safely near electrical dividers while wearing less personal protective equipment The Fluke 3000 FC True-RMS wireless multimeter and the Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then, at a safe distance, read the results on the 3000 FC wireless multimeter. You can display the meter's readings plus the readings of up to 3 wireless modules, while reducing the risk of arc discharge by staying away from hazardous measurement situations. Even better: the Fluke 3000 FC Series wireless multimeter can send readings to your smartphone, allowing you to store readings on it and share them with your team on site, anytime, anywhere. Don't get caught up chasing interrelated events Timing is all-important when you are trying to find the cause of a complex problem. You often need to measure in one place while looking at activity in another part of the system. We've solved that problem with Fluke Connect - connect your remote modules to a particular location and then measure with the Fluke 3000 FC multimeter up to 20 metres away from that location. You can see the interaction between your remote measurement points on a single screen, in real-time. You can even download the data to a PC for further analysis. Other capabilities of Fluke Connect and the 3000 FC multimeter. Add your laptop and go from logging straight to analysis and diagnosis. Log data over an extended period of time with the Fluke Connect wireless modules and monitor an hour, a shift or a week's worth of circuit load changes. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. Save time, effort and energy with the Fluke 3000FC True-RMS digital multimeter with a set of industrial test leads and a non-contact voltage locator, all in a compact, durable carrying case. Key features: The Fluke 3000 FC has features and functions you need to examine your equipment and installation for faults. True-RMS AC voltage and current for accurate measurements on non-linear loads Large-digit display with analogue bargraph Backlit display for working in dark places Capacity Records minimum and maximum values to support troubleshooting Keep your hands free with the magnetic hanging clip included in this combination kit 3-year warranty Plus, Fluke Connect wireless-compatible modules measure AC, DC and AC+DC voltage, AC and DC current and temperature, all of which are displayed on Fluke's 3000 FC series wireless multimeter. Choose a standard current clamp or a flexible current clamp to measure AC current. Mix and match modules to meet your unique measurement needs. Read the primary measurement value on the main display, and data from up to three modules at the same time. Modules are available individually, or as part of Fluke Connect kits ds: dsc: kts: wireless multimeter kpn: 3000 FC kpn_dash: kpn_clear: 3000FC bkpn: FLUKE 3000 FC bkpn_clear: FLUKE 3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4401595 sr_ns: FLUKE4401595
r: 03346457 p: 581.935 pid: 158590 b: FLUKE q: 0 st: lt: 8 ean: 0195112122648 sr: FLUKE 5593173 sr_no_br: 5593173 sr_no_br_cl: 5593173 sr_cl: FLUKE5593173 sr_dash: sold: 1745.805 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message No Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 283 FC digital multimeter CAT III 1500 V in carrying case - 5593173 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC digital multimeter is ideal for technicians working in DC environments up to 1500 V. Whether you are working with utility-scale solar photovoltaic (PV) arrays, wind power, electric railway lines or data centres, the Fluke 283 FC improves safety and increases productivity while providing accurate, reliable and reproducible results. The 283 FC comes with silicone TwistGuard test leads with safety specification TL175-HV CAT III 1500 V/CAT IV 1000 V for working in higher voltage environments without compromising safety, giving you more flexibility when testing voltage, milli voltage, resistance, continuity or capacitance. The backlit LCD display and backlit keypad make it easier to work in different lighting conditions, while the magnetic suspension kit leaves your hands free during testing. The 283 FC also comes with a custom-made carrying case that protects your investment during transport. Key features Highly accurate voltage measurements for accurate front-line fault finding Current measurements up to 60 A AC/DC for safe and more accurate fault finding in individual sets of modules (when using the optional a283 FC wireless current clamp) Visual and audio polarity indicators with on/off function help prevent wiring problems User-defined limit meter helps you make quick go/no-go decisions when looking for faults Unique multimeter readiness self-test ensures your meter is ready for testing Store and log readings in internal memory and view them on your mobile device via Fluke Connect ds: dsc: Scope of delivery 283 FC TRMS wireless digital multimeter TL175-HV TwistGuard silicone measuring leads Premium protective bag Magnetic suspension strap kts: digital multimeter CAT III 1500 V in carrying case kpn: 283 FC kpn_dash: kpn_clear: 283FC bkpn: FLUKE 283 FC bkpn_clear: FLUKE 283FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5593173 sr_ns: FLUKE5593173
r: 03270131 p: 113.9 pid: 87422 b: FACOM q: 3 st: 1 lt: 1 ean: 3662424167621 sr: FACOM DX.V12APB sr_no_br: DX.V12APB sr_no_br_cl: DXV12APB sr_cl: FACOMDXV12APB sr_dash: sold: 1708.5 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 45 V Measurement Lo-Z No Supplier warranty FACOM - Legal warranty applicable Digital Yes Battery type 9V Low battery message No With current clamp No Diode test No Continuity test Yes Automatic shut-off Yes Measurement temperature No Measurement of electrical capacity No Measurement frequency No Measurement resistance Yes Current measurement No Measurement voltage Yes Measurement of noise No Max. resistance 40 MOhm n: FACOM DX.V12APB car tester cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Line test to detect faulty connections in the electrical circuit very easily Can be used very easily by any mechanic All accessories are adapted to automotive circuit testing Housing: shock and oil resistant Can be used with one hand Clearly readable 3-colour display: white - green - red Voltmeter: DC 0 - 49 V Ohmmeter: 0-40 MOhm RWS Continuity test < 30 Ohm: BIP Identification PWM signals ds: dsc: kts: car tester kpn: DX.V12APB kpn_dash: kpn_clear: DXV12APB bkpn: FACOM DX.V12APB bkpn_clear: FACOM DXV12APB c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Facom / Facom tools / Facom measuring and inspection technique / Facom digital measuring and inspection instruments / Facom digital measuring instruments / Facom multimeter sr_no_br_cl_ns: DXV12APB sr_ns: FACOMDX.V12APB
r: 08079843 p: 153.062 pid: 72474 b: WIHA q: 3 st: 1 lt: 1 ean: 4010995452155 sr: WIHA 45215 sr_no_br: 45215 sr_no_br_cl: 45215 sr_cl: WIHA45215 sr_dash: sold: 1683.682 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Max. current AC/DC 10 A Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes Diode test Yes Continuity test Yes Measurement Lo-Z No With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 60000 µF Max. frequency 60000 kHz Measurement of electrical capacity Yes Max. resistance 200 MOhm n: WIHA 45215 digital multimeter to 1000V AC, CAT IV incl. 2x AAA batteries cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Simplifies your work: Effective values due to True RMS function facilitate the right application. Increases your efficiency: Quick result finding based on minimum and maximum values. Simplifies your work: Large LCD display with bar graph and background illumination as well as signal sound for easy to read measurement results. Makes handling easier: Automatic measuring range setting saves the manual pre-selection. Simplifies your work: Simplifies storage and relative value measurement and expedites the comparison of measured values. Product dimensions: 282 x 110 x 60 mm (LxWxD) Application: For multi-functional use in different application locations. Measuring category: CAT III 1.000 V / CAT IV 600 V Suitable for photovoltaic systems 1,000 V AC / 1,000 V DC CAT III 1,000 V / CAT IV 600 V Current measurement 600 µA - 10 A Automatic measurement range selection True RMS Are you looking for a multimeter that covers the relevant measurement variables needed during the workday of an electrician? The digital multimeter from Wiha optimally equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. The additional bar graph display ensures the quick and clear recognition of changes. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The Measurement of TRUE-RMS values facilitates the application of the measurement results. The storage of previous measurement values and their comparison to future measurement results allows various control options. Add to this optimal result finding through the generation of minimum and maximum values. According to the measurement categories CAT III up to 1000 V AC and CAT IV up to 600 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. IEC/EN 61010-1, IEC/EN 61010-2-033, IEC/EN 61010-031, IP40, CE ds: dsc: Scope of delivery 1x digital multimeter 45215 1x protective red cover 2x test leads (1x red, 1x black) 2x batteries AAA 1,5V, IEC LR03 1x instruction manual kts: digital multimeter to 1000V AC, CAT IV incl. 2x AAA batteries kpn: 45215 kpn_dash: kpn_clear: 45215 bkpn: WIHA 45215 bkpn_clear: WIHA 45215 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Wiha / Wiha tools / Wiha measuring and inspection technique / Wiha digital measuring and inspection instruments / Wiha digital measuring instruments / Wiha multimeter sr_no_br_cl_ns: 45215 sr_ns: WIHA45215
r: 02951022 p: 814.828 pid: 71955 b: FLUKE q: 0 st: lt: 8 ean: 0095969586702 sr: FLUKE 3947820 sr_no_br: 3947820 sr_no_br_cl: 3947820 sr_cl: FLUKE3947820 sr_dash: sold: 1629.656 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 28-II industrial multimeter (IP67) - 3947820 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new standard for ruggedness The Fluke 27 II and 28 II digital multimeters set a new standard for working in harsh environments, while having the features and accuracy to solve most electrical problems. Both meters are rated to IP 67 (ensuring water and dust tightness), have been submitted to MSHA for approval, have an extended operating temperature range of -15 °C to + 55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) at a relative humidity of 95% and are designed and tested to withstand a 3 m drop. Fluke 20-series multimeters are designed for use in the most demanding environments. Key features Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 200 kHz Enlarged AC voltage bandwidth ? 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II) Built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (28 II) Resistance measurement, dial-through and diode test Min/Max and Average recording for automatic recording of variations Peak min-max (28 II) Unique function for accurate voltage and frequency measurements on variable-speed drives and other devices causing electrical disturbances (28 II) Other features IP 67 protection, i.e. water and dust tight, fully sealed for use in harsh environments Designed to withstand a 3-metre drop (with holster) High-resolution display mode of 20,000 counts (28 II) True-RMS AC voltage and current for accurate measurements on non-linear signals (28 II) Average response voltage and current for measurements (27 II) Illuminated keys ensure easy readability even in poorly lit environments Large display figures and bright white backlight with two illumination levels for better legibility Reversible holster for extra protection when not in use The meter withstands dangerous voltage peaks of 8,000 V caused by switching loads and by disturbances in industrial circuits. It complies with the second edition of IEC and ANSI safety standards for electrical equipment. Long battery life (800 hours) Relative mode for eliminating test lead resistance when measuring low resistance values Automatic and manual range adjustment for maximum flexibility Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. MSHA approval ds: dsc: Scope of delivery Industrial multimeter 28-II TL75 test leads AC175 alligator clips 80BK-A type-K thermocouple probe kts: industrial multimeter (IP67) kpn: 28-II kpn_dash: 28 kpn_clear: 28II bkpn: FLUKE 28-II bkpn_clear: FLUKE 28II c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947820 sr_ns: FLUKE3947820
r: 02950134 p: 51.005 pid: 70324 b: STANLEY q: 0 st: lt: 7 ean: 3253560825645 sr: STANLEY FMHT82564-0 sr_no_br: FMHT82564-0 sr_no_br_cl: FMHT825640 sr_cl: STANLEYFMHT825640 sr_dash: STANLEY FMHT82564 sold: 1428.14 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Max. current AC/DC 600 A Automatic shut-off Yes With current clamp Yes Continuity test Yes Measurement Lo-Z No Low battery message Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. frequency 3 kHz Max. resistance 10 MOhm Measurement of electrical capacity No Product Range Stanley Fatmax n: STANLEY FMHT82564-0 FATMAX smart digital multimeter cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description STANLEY FATMAX DIGITAL MULTIMETER/AMPERE CLAMP SMART Features Robust housing AC/DC Voltage 600V Current clamp - multimeter measures current up to 600A Dual display - ability to hold 2 values on the screen at the same time Hold function - allows a value to be held for several seconds Smart function automatically detects the correct measurement Max min measurement CAT III 600V AC current 600A Resistance 10MO Frequency 3KHZ ETL/CE certification ds: dsc: kts: FATMAX smart digital multimeter kpn: FMHT82564-0 kpn_dash: FMHT82564 kpn_clear: FMHT825640 bkpn: STANLEY FMHT82564-0 bkpn_clear: STANLEY FMHT825640 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Stanley / Stanley tools / Stanley measuring and inspection technique / Stanley digital measuring and inspection instruments / Stanley digital measuring instruments / Stanley multimeter | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: FMHT825640 sr_ns: STANLEYFMHT82564-0
r: 02125466 p: 642 pid: 72409 b: FLUKE q: 2 st: 1 lt: 1 ean: 0095969586719 sr: FLUKE 3947835 sr_no_br: 3947835 sr_no_br_cl: 3947835 sr_cl: FLUKE3947835 sr_dash: sold: 1284 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 77 IV digital multimeter 1000V - 3947835 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 77-IV digital multimeter has the features you need to solve most electrical and electronic problems. Easy to use, this meter is significantly improved over Fluke's original 70 series. For example, this meter has more measurement functions, meets the latest safety standards, and has a much larger display that is easier to read. Measuring functions Measuring range up to 1000 V Average value method AC measurements 0.3% accuracy 10 amps continuously (20 A for 30 seconds) Frequency and capacitance measurement Resistance and continuity test Key features Large display Backlight for poorly lit areas Min/Max recording of signal fluctuations Ergonomic overmolded housing with integrated probe holders Keep your hands free with the optionally available magnetic TPAK suspension kit Automatic and manual range adjustment Meets the safety standards of measurement category CAT III 1000 V and CAT IV 600 V The 77-IV replaces the 77. Step up to superior functionality and safety today. ds: dsc: Scope of delivery 9V battery (installed) Test leads User manual kts: digital multimeter 1000V kpn: 77 IV kpn_dash: kpn_clear: 77IV bkpn: FLUKE 77 IV bkpn_clear: FLUKE 77IV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947835 sr_ns: FLUKE3947835
r: 03252442 p: 1245.519 pid: 73811 b: FLUKE q: 0 st: lt: 10 ean: 0195112041222 sr: FLUKE 5337401 sr_no_br: 5337401 sr_no_br_cl: 5337401 sr_cl: FLUKE5337401 sr_dash: sold: 1245.519 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 393-IRR-PVLEAD current clamp 1500 V + radiation meter in carrying case - 5337401 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 393 CAT III 1500 V True-RMS solar current clamp with iFlex is designed for solar photovoltaic (PV) technicians and maintenance professionals working in high DC voltage environments: PV arrays, wind power, electric railways, battery banks for emergency power supplies in data centres. The current clamp measures up to 1500 V DC and 1000 V AC with test leads and up to 999.9 A DC or AC via the jaw. The included iFlex flexible current clamp offers extended AC current measurements up to 2500 A. The 393 has a thin jaw, allowing you to access cables in crowded combiner cabinets. Moreover, the measuring leads are designed with your work in mind and also comply with safety specification CAT III 1500 V DC. Key features Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and IP54 rated for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity IP54 protection class, ideal for outdoor work on solar panels and wind systems DC power measurement, with readings in kVA Audio polarity indicator helps prevent unintentional faulty wiring Visual continuity tests provide a bright green light on the display, ideal when working in dark and noisy environments When measuring AC current, the included flexible current clamp iFlex gives you unparalleled access to cables in tight spaces. The iFlex probe can be rotated through extremely tight spaces and delivers accurate current measurements. ds: dsc: Scope of delivery 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, right-angle plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap High-quality protective bag Pomona PVLEAD1 MC4 to 4 mm test lead set Pomona PVLEAD3 MC4 measuring lead set for solar current clamp IRR1-SOL radiation meter for solar energy 80PR-IRR external temperature measuring probe C250 carrying case with shoulder strap kts: current clamp 1500 V + radiation meter in carrying case kpn: 393-IRR-PVLEAD kpn_dash: 393 kpn_clear: 393IRRPVLEAD bkpn: FLUKE 393-IRR-PVLEAD bkpn_clear: FLUKE 393IRRPVLEAD c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5337401 sr_ns: FLUKE5337401
r: 02950118 p: 24.819 pid: 70695 b: STANLEY q: 0 st: lt: 12 ean: 3253560825652 sr: STANLEY FMHT82565-0 sr_no_br: FMHT82565-0 sr_no_br_cl: FMHT825650 sr_cl: STANLEYFMHT825650 sr_dash: STANLEY FMHT82565 sold: 1240.95 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Max. current AC/DC 10 A With current clamp No Diode test Yes Continuity test Yes Measurement Lo-Z No Low battery message Yes Measurement of noise No Measurement frequency No Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. resistance 2 MOhm Measurement of electrical capacity No Product Range Stanley Fatmax n: STANLEY FMHT82565-0 FATMAX digital multimeter cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description STANLEY FATMAX DIGITAL MULTI METER Features Single display Hold function - allows a value to be held for several seconds Robust housing CAT III 600V AC/DC Voltage 600V AC current 10A Resistance 2MO Continuity ds: dsc: kts: FATMAX digital multimeter kpn: FMHT82565-0 kpn_dash: FMHT82565 kpn_clear: FMHT825650 bkpn: STANLEY FMHT82565-0 bkpn_clear: STANLEY FMHT825650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Stanley / Stanley tools / Stanley measuring and inspection technique / Stanley digital measuring and inspection instruments / Stanley digital measuring instruments / Stanley multimeter | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: FMHT825650 sr_ns: STANLEYFMHT82565-0
r: 02954020 p: 1223.099 pid: 73521 b: FLUKE q: 0 st: lt: 8 ean: 0095969401203 sr: FLUKE 2840265 sr_no_br: 2840265 sr_no_br_cl: 2840265 sr_cl: FLUKE2840265 sr_dash: sold: 1223.099 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test No Max. current AC/DC 2000 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. frequency 1 kHz n: FLUKE 355 True RMS 2000 A current clamps - 2840265 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Key features: Reliably perform many high-current measurement applications with 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC. Large jaw span of 58 mm (2.3 in) is suitable for large or multiple conductors Safety specification according to CAT IV 600 V, CAT III 1000 V for additional user protection Inrush current measurement records inrush currents with high accuracy and reproducibility High voltage measurements of 1000 V AC + DC true-rms, 600 V AC and 1000 V DC allow the user to perform multiple tests with only one instrument (only for the 355) A resistance to 400 kOhm combined with a call-through test function offers the convenience of a multimeter in a current clamp. (only for the 355) Accurately measure frequencies up to 1 kHz for optimal troubleshooting Quickly analyse measured values with MIN, MAX and AVG functions Large backlit display ensures easy readability even in poor lighting conditions Use the display hold function to record measured values even when it is not possible to look directly at the display Use the low-pass filter to smooth out loads with high noise and stabilise readings Product description: Versatile and robust instrument for high-current applications Make reliable measurements with complete confidence with the Fluke 355 and 353 true-rms digital current clamps, the preferred instruments for current clamp measurements of high current levels up to 2000 A. The extra-wide jaws are easy to apply around large conductors, such as those commonly found in installations with high current levels. The particularly robust design of these instruments and their approval to safety specifications CAT IV 600 V and CAT III 1000 V provide extra protection when measuring high current levels. Accurate peak measurements can be made with the inrush current function - ideal for electric motors and inductive loads. The 355 also measures voltage and resistance, making it the ideal current clamp for utilities, electrical installers and industrial maintenance engineers. ds: dsc: Scope of delivery current clamp 355 carrying case C43 6 AA batteries silicone rubber measuring leads TL224, 1.5 m long measuring probes TP2 crocodile clips AC285 user manual 3-year warranty kts: True RMS 2000 A current clamps kpn: 355 kpn_dash: kpn_clear: 355 bkpn: FLUKE 355 bkpn_clear: FLUKE 355 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2840265 sr_ns: FLUKE2840265
r: 02950114 p: 42.339 pid: 70689 b: STANLEY q: 0 st: lt: 13 ean: 3253560825638 sr: STANLEY FMHT82563-0 sr_no_br: FMHT82563-0 sr_no_br_cl: FMHT825630 sr_cl: STANLEYFMHT825630 sr_dash: STANLEY FMHT82563 sold: 1185.492 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Max. current AC/DC 600 A With current clamp No Continuity test Yes Measurement Lo-Z No Low battery message Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. frequency 3 kHz Max. resistance 10 MOhm Measurement of electrical capacity No Product Range Stanley Fatmax n: STANLEY FMHT82563-0 FATMAX smart digital multimeter cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description STANLEY FATMAX DIGITAL MULTI METER SMART Features Robust housing Dual display - ability to keep 2 values on the screen at the same time Backlit display Hold function - allows a value to be held for several seconds Smart function automatically detects the correct measurement Max min measurement CAT III 600V AC/DC Voltage 600V Resistance 10MO Frequency 3KHZ NCV (Non-contact voltage) ETL/CE certification ds: dsc: kts: FATMAX smart digital multimeter kpn: FMHT82563-0 kpn_dash: FMHT82563 kpn_clear: FMHT825630 bkpn: STANLEY FMHT82563-0 bkpn_clear: STANLEY FMHT825630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Stanley / Stanley tools / Stanley measuring and inspection technique / Stanley digital measuring and inspection instruments / Stanley digital measuring instruments / Stanley multimeter | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: FMHT825630 sr_ns: STANLEYFMHT82563-0
r: 03398802 p: 281.823 pid: 178057 b: FLUKE q: 16 st: 1 lt: 1 ean: 0095969623766 sr: FLUKE 5065866 sr_no_br: 5065866 sr_no_br_cl: 5065866 sr_cl: FLUKE5065866 sr_dash: sold: 1127.292 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 325 True RMS current clamp - 5065866 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 323, 324 and 325, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 325 also offers measurement functions for DC current and frequency. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC and DC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kOhm with loop-through test Temperature and capacitance measurement Frequency measurement ds: Others guess... Professionals know. Fluke Promotion for Electricians Promotion valid from 02.03.2026 until 31.07.2026. During this spring promotion, you can buy selected Fluke instruments at an extra attractive price. Measure reliably, work with greater confidence, and equip your tool belt with instruments that professionals trust every day. dsc: Scope of delivery 325 True-RMS current clamp Measurement leads Carrying case User manual kts: True RMS current clamp kpn: 325 kpn_dash: kpn_clear: 325 bkpn: FLUKE 325 bkpn_clear: FLUKE 325 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Brand promotions / Fluke promotions / Fluke promotion for electricians 2026 sr_no_br_cl_ns: 5065866 sr_ns: FLUKE5065866
r: 08107120 p: 1074 pid: 72930 b: FLUKE q: 0 st: lt: 10 ean: 0095969493901 sr: FLUKE 3449156 sr_no_br: 3449156 sr_no_br_cl: 3449156 sr_cl: FLUKE3449156 sr_dash: sold: 1074 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289 IMSK service kit industrial multimeter - 3449156 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS accuracy with manual and automatic range setting, display hold, auto hold and min/max recording provide the results you need. The Fluke-i400 AC 400A current clamp turns the 289 into a current meter. The meter's safety specification CAT III 1000 V, CAT IV 600 V ensures that you can do your job safely. This combination set is based on the Fluke 289, the high-performance industrial multimeter with data logging function, combined with the i400 AC current clamp. Together, the parts help solve complex problems in electronics, plant automation, power distribution and electromechanical equipment. The set includes special accessories that allow you to be even more productive and brings savings of more than 15% compared to the individual prices of all accessories. Plus, you'll be working with the most trusted tools in the world. Features Fluke 289 DMM Can log data and display graphical results. TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Graphically monitor up to 10,000 logged events and values captured in the log with built-in TrendCapture Zoom in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. Low-pass filter for accurate simultaneous voltage and frequency measurements on frequency-controlled drives and other devices that cause electrical disturbances. Includes premium measurement lead, crocodile clips and amplifier connectors. Functions and features Fluke i400 AC current clamp Provides accurate current measurements up to 400 A AC without interrupting electrical circuits. Flexible, heat-resistant test leads and alligator clips complete this high-quality set. Soft, coated handle with non-slip surface prevents accidental touching of live wires Max. conductor diameter Ø 32 mm 1000 V voltage detection range for wide range of applications Measures up to 1000 V AC/DC Measure up to 10 A AC/DC Measure resistance up to 500 MOhm Measure frequency up to 1000 kHz Safety features CAT III 1000 V for extra protection CAT IV 600 V for extra protection Approved according to CE and CSA ds: dsc: Scope of delivery Fluke 289 True-RMS multimeter with data logging function Fluke I400, 400A AC current clamp TL71 Flexible silicone test lead set AC175 Alligator clip set with screw thread kts: service kit industrial multimeter kpn: 289 IMSK kpn_dash: kpn_clear: 289IMSK bkpn: FLUKE 289 IMSK bkpn_clear: FLUKE 289IMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3449156 sr_ns: FLUKE3449156
r: 03169828 p: 168.842 pid: 87286 b: FACOM q: 3 st: 1 lt: 1 ean: 3662424145117 sr: FACOM 711BPB sr_no_br: 711BPB sr_no_br_cl: 711BPB sr_cl: FACOM711BPB sr_dash: sold: 1013.052 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement Lo-Z No Supplier warranty FACOM - 3 years Digital Yes Battery type AAA Low battery message Yes Max. current AC/DC 1500 A With current clamp No Diode test No Continuity test Yes Automatic shut-off Yes Measurement temperature No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. frequency 3 kHz Measurement of noise No Max. resistance 10 MOhm n: FACOM 711BPB smart digital multimeter up to 600V AC/DC cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Multimeter with SMART function: automatically selects the measurement to be displayed Illuminated display with 2 lines for additional information Immediate display in amps (when used with ammeter clamp) Supplied with short measuring pin (CAT III) and long measuring pin (CAT II), suitable for current greater and less than 50V respectively Min Max mode: ideal for measuring sensors and probes Data hold function Low battery indication (display shows when battery is low) Dimensions: 74 x 155 x 48 mm. Measuring range True RMS Voltmeter: AC/DC from 0 to 600V Ohm meter: 0 to 10 MOhm Frequency meter: 0 to 3 Khz Continuity test ds: dsc: Scope of delivery Set of SMART measuring pens CAT II & III 2x AAA batteries kts: smart digital multimeter up to 600V AC/DC kpn: 711BPB kpn_dash: kpn_clear: 711BPB bkpn: FACOM 711BPB bkpn_clear: FACOM 711BPB c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Facom / Facom tools / Facom measuring and inspection technique / Facom digital measuring and inspection instruments / Facom digital measuring instruments / Facom multimeter sr_no_br_cl_ns: 711BPB sr_ns: FACOM711BPB
r: 03169830 p: 337 pid: 86743 b: FACOM q: 0 st: lt: 6 ean: 3148519049916 sr: FACOM 714APB sr_no_br: 714APB sr_no_br_cl: 714APB sr_cl: FACOM714APB sr_dash: sold: 1011 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement Lo-Z No Max. current AC/DC 0,4 A Supplier warranty FACOM - 3 years Digital Yes Battery type AA Automatic shut-off Yes With current clamp No Diode test Yes Continuity test Yes Low battery message Yes Measurement temperature Yes Measurement of electrical capacity No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Measurement of noise No Max. frequency 400 kHz Max. resistance 40 MOhm n: FACOM 714APB automotive multimeter cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Measurement of the internal resistance of batteries Operates with the ampere clamp 711A.P500 Automatic calibration Voltage meter: AC / DC 0 to 600V Ammeter: AC / DC 0 to 400 mA Ohmmeter: 0 Ohm to 40 MOhm Continuity and diode test Cyclic ratio: 5% to 99% Frequency meter: 1 Hz to 400 KHz Ridge angle Tachometer Temperature measurement ds: dsc: Scope of delivery Set of measuring pens Battery analysis cable K-temperature sensor Protective red snap-on casing kts: automotive multimeter kpn: 714APB kpn_dash: kpn_clear: 714APB bkpn: FACOM 714APB bkpn_clear: FACOM 714APB c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Facom / Facom tools / Facom measuring and inspection technique / Facom digital measuring and inspection instruments / Facom digital measuring instruments / Facom multimeter sr_no_br_cl_ns: 714APB sr_ns: FACOM714APB
r: 03388634 p: 144.426 pid: 178059 b: FLUKE q: 0 st: lt: 7 ean: 0195112151556 sr: FLUKE 6101416 sr_no_br: 6101416 sr_no_br_cl: 6101416 sr_cl: FLUKE6101416 sr_dash: sold: 1010.982 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test Yes Continuity test Yes Max. current AC/DC 600 A Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 0,4 kHz n: FLUKE 301D Palm-sized AC/DC current clamp - 6101416 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Light and portable body (154 g and 16 mm thick) Slim jaws of only 10 mm fit easily around very tight wires Use for cabling in buildings, lighting, switches, sockets, motors and electronics Range of 600 A AC/DC (model D), high resolution of 0.01 A Key features Test voltage, resistance and continuity Test current frequency and voltage frequency Test capacitance and diodes Backlight ds: dsc: kts: Palm-sized AC/DC current clamp kpn: 301D kpn_dash: kpn_clear: 301D bkpn: FLUKE 301D bkpn_clear: FLUKE 301D c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101416 sr_ns: FLUKE6101416
r: 02954082 p: 488.877 pid: 72142 b: FLUKE q: 0 st: lt: 10 ean: 0095969799683 sr: FLUKE 4699340 sr_no_br: 4699340 sr_no_br_cl: 4699340 sr_cl: FLUKE4699340 sr_dash: sold: 977.754 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 0,4 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 3000FC/TPAK wireless multimeter kit with ToolPAK magnetic hanging clip - 4699340 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Key features: The Fluke 3000 FC has features and functions you need to examine your equipment and installation for faults. True-RMS AC voltage and current for accurate measurements on non-linear loads Large-digit display with analogue bargraph Backlit display for working in dark places Capacity Records minimum and maximum values to support troubleshooting Keep your hands free with the magnetic hanging clip included in this combination kit 3-year warranty Plus, Fluke Connect wireless-compatible modules measure AC, DC and AC+DC voltage, AC and DC current and temperature, all of which are displayed on Fluke's 3000 FC series wireless multimeter. Choose a standard current clamp or a flexible current clamp to measure AC current. Mix and match modules to meet your unique measurement needs. Read the primary measurement value on the main display, and data from up to three modules at the same time. Modules are available individually, or as part of Fluke Connect kits Product description: Compatible with Fluke Connect Mobile App Fluke's 3000 FC Series wireless multimeter ensures that instruments and not your body are near live electrical dividers. Increase safety and efficiency with this tester. All the facts, right on site. The Fluke 3000 FC True-RMS wireless multimeter with the Fluke Connect app and ShareLive video call function. Accuracy, reliability and ease of use make the Fluke 3000 FC wireless multimeter the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to investigate and troubleshoot many problems in electrical and electronic systems. The Fluke 3000 FC offers you True-RMS voltage and current measurement functions, 6000-count resolution and manual and automatic range setting. It can also perform frequency, capacitance and resistance measurements as well as dial-through and diode tests. In addition, the Fluke 3000 FC offers a higher base accuracy of 0.09%, a digital display showing up to three secondary remote module readings and a bright white backlight. Work safely near electrical dividers with less protective equipment The Fluke 3000 FC True-RMS wireless multimeter and the Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then, at a safe distance, read the results on the 3000 FC wireless multimeter. You can display the meter's readings plus the readings of up to 3 wireless modules, while reducing the risk of arc discharge by staying away from hazardous measurement situations. Even better, the Fluke 3000 FC Series wireless multimeter can send readings to your smartphone, allowing you to store readings on it and share them with your team on-site, anytime, anywhere. Troubleshoot connected events Timing is everything when you are trying to find the cause of a complex problem. You often need to measure in one place while looking at activity in another part of the system. We've solved that problem with Fluke Connect - connect your remote modules to a particular location and then measure with the Fluke 3000 FC multimeter up to 20 metres away from that location. You can see the interaction between your remote measurement points on a single screen, in real-time. You can even download the data to a PC for further analysis. Other features Add your laptop and go from logging immediately to analysis and diagnosis. Log data over an extended period of time with the Fluke Connect wireless modules and monitor changes in circuit loads for an hour, a shift or a week. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. Save time, effort and energy with the Fluke 3000FC True-RMS digital multimeter with a set of industrial test leads and a non-contact voltage locator, all in a compact, durable carrying case. ds: dsc: Scope of delivery Fluke 3000 FC True-RMS digital multimeter with backlight Fluke TL75 test leads Fluke C35 lightweight carrying case ToolPak magnetic hanging clip Installed batteries User's manual on CD kts: wireless multimeter kit with ToolPAK magnetic hanging clip kpn: 3000FC/TPAK kpn_dash: kpn_clear: 3000FCTPAK bkpn: FLUKE 3000FC/TPAK bkpn_clear: FLUKE 3000FCTPAK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4699340 sr_ns: FLUKE4699340
r: 02910842 p: 469.169 pid: 71248 b: BEHA-AMPROBE q: 0 st: lt: 8 ean: 0095969556675 sr: BEHA-AMPROBE 3729989 sr_no_br: 3729989 sr_no_br_cl: 3729989 sr_cl: BEHAAMPROBE3729989 sr_dash: BEHA sold: 938.338 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test Yes Continuity test Yes Max. current AC/DC 1000 A Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 4000 µF Max. frequency 10 kHz n: BEHA-AMPROBE ACDC-54NAV AC/DC TRMS Navigator current clamp 1000 A, jaw 42 mm - 3729989 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Functions Current, voltage and resistance measurement Call-through test Capacitance and frequency measurement Temperature measurement Active power measurement Measurement of power factor cos Phi Measurement of harmonics for current and voltage values (up to the 25th harmonic) Measurement of total harmonic distortion (THD) Measurement of inrush current for motors Additional info: Automatic and manual range selection Integrated measured value memory (MIN/MAX and Data Hold) Peak value memory (peak detection) Rotary level measurement Low-pass filter for measurement on frequency converters Display with large digits, backlight and analogue bar graph 42 mm jaw opening Automatic switch-off Main product features True-RMS measurements AC/DC (TRMS) Automatic torch function when jaw opens Non-contact voltage detection Functions can be selected via a joystick ds: dsc: kts: AC/DC TRMS Navigator current clamp 1000 A, jaw 42 mm kpn: ACDC-54NAV kpn_dash: ACDC kpn_clear: ACDC54NAV bkpn: BEHA-AMPROBE ACDC-54NAV bkpn_clear: BEHA-AMPROBE ACDC54NAV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Beha-amprobe / Beha-amprobe tools / Beha-amprobe measuring and inspection technique / Beha-amprobe digital measuring and inspection instruments / Beha-amprobe digital measuring instruments / Beha-amprobe multimeter sr_no_br_cl_ns: 3729989 sr_ns: BEHA-AMPROBE3729989
