Faster drilling with Milwaukee SDS-Max
- Prevents jamming in rebar: The solid 4-cutter carbide head powers through reinforced concrete without catching or seizing during demanding jobs.
- Pinpoint centering accuracy: The sharp centering tip prevents wandering so you can start holes exactly where you mark them.
- Rapid dust extraction: Optimized flute geometry moves debris away quickly, reducing heat buildup and extending the lifespan of the bit.
Power through tough reinforced concrete and solid masonry with the Milwaukee SDS-Max MX4 hammer drill bit. Built with a solid four-cutter carbide head, it pulverizes tough aggregate and prevents jamming when encountering rebar. The sharp centering tip stops the bit from wandering, letting you start precise holes right where you mark them. Its four-flute spiral geometry clears drill dust rapidly away from the cutting zone to minimize heat buildup and wear. With a 16 mm diameter, a 400 mm working length, and an overall length of 540 mm, it is designed for deep penetrations for conduits, pipes, and secure anchor fixings. The SDS-Max shank transfers full hammer impact energy without slipping.
Product description
- Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimised drilling performance when hitting reinforced steel equalling longer life time.
- Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip. Reduces jamming up on hitting reinforcing steel.
- Centering point with 130° point angle. Easy spot drilling with pinpoint accuracy and ensures optimum guidance during drilling.
- Big, robust secondary cutter with dynamic, curved cutting edge. Supports the primary cutter for faster drilling.
- Shorter spiral windings. For faster transport of drilling dust from the head to the flute = Less wear and heat build up at the tip.
- Innovative, unique carbide tip. With more carbide on all diameters and extra carbide on Ø >32 mm.
- Wear mark on both sides of primary cutter. Guarantees diameter accuracy i.e. for anchor fittings. Life time indicator in warranty cases.
- Patented reinforced flute geometry. Lower vibrations for smoother drilling. Stronger flute means less breakages. Better transfer of hammer energy to the tip.
- Deep flute shoulders. High volume dust removal for optimum drilling speed less wear and heat build up.
- Low vibration drilling performance. Comfortable drilling ensures less stress for man and machine.
- Special surface treatment. Shot blasting provides a smooth surface and densifies the surface structure and makes the bit more wear resistant.
- PGM conformity. Guarantees precise holes for anchor fitting over the entire life time of the drill bit.