Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Product Range
Diameter
Connection type (machine)
Number of teeth
Bore size
Quantity per blister
For model
Length
Large diameter
Connection size (machine)
Min. diameter
Point angle
Max. diameter
Number of steps
PG size
Geometry (Drill point)
Outer diameter
Countersink angle
Largest diameter
Smallest diameter
Small diameter
Effective length
Max. cutting depth
Supplier warranty
For thread designation
Min. countersink diameter
Quantiy per pack
Max. countersink diameter
Cutting length
Material (drill bit)
Connection profile
For material
Shank size
Overall length
Shank type
Drill bit type
Standard
Surface treatment (drill bit)
Number of cutting edges
Strength
L
Tool holder
Coating
Diameter
RPM of, soft non-ferrous metals
Stair diameter (all) mm
RPM of, steels up to 700 N/mm²
Workable materials 6
Number, drill steps
Workable materials 2
Workable materials 21
RPM to, stainless and acid-resistant steels
Number of teeth
Heat resistance
Number of flutes (z)
Base material
Workable materials 25
Spiral drill bit (mm)
Number of steps
With cooling channel
Height
NL
Spiral groove
Interchangeable centring tip
Carbide version
Min. drill diameter (mm)
Internal hexagon, diameter (inches)
Workable materials 20
Workable materials 10
Processing tasks 2
Drilling range, from
Workable materials 9
Workable materials 4
Workable materials 8
Workable materials 11
Workable materials 23
Workable materials 27
D
Workable materials 26
Workable materials 13
Workable materials 15
Workable materials 19
Workable materials
Workable materials 17
RPM up to, soft non-ferrous metals
RPM of, thermoplastics, fibre-reinforced plastics (GRP/CFK)
Workable materials 22
Workable materials 5
RPM of, stainless and acid-resistant steels
s
GL
Workable materials 24
Workable materials 7
Workable materials 14
Workable materials 28
Workable materials 3
RPM up to, steels up to 700 N/mm²
Workable materials 18
Drilling range, up to
Processing tasks 1
Workable materials 16
Shaft diameter in.
Workable materials 12
RPM to, thermoplastics, fibreglass plastics (GRP/CFK)
Length mm (B)
Workable materials 1
Drill stairs
Shaft shape
Number of cutting edges
Max. sheet thickness (mm)
Drill diameter mm (A)
Standard PG size
Segment
Length cm
Max. drill depth
Accessory length
Diameter/wrench width mm
Drill hole sizes mm (A)
Adhesion
Greatness
Width
Pen shape
Number of drills for steel
Cutting surface length (mm)
Number of universal drills
Packaging
Application materials
Product text, accessories grey
Inch (Ø ")
Matching
Hexagon shank (d2)
Type of packaging
Title spin diagram
Drill crown depth (L1)
ETIM 8.0 Group Name
Inclination angle
ETIM 8.0 Group Code
Drill hole depth
Hole dia.
With quick-release fastener
ETIM 8.0 Class Name
Performance class
Shaft diameter
Threaded attachment
ETIM 8.0 Class Code
Shaft diameter (d) inch
Length (metres)
Spiral drill
Shaft
Length inch (B)
Board depth
RPM of, steels above 700 N/mm²
RPM of, hard non-ferrous metals
Workable materials 29
Workable materials 31
Length (l3)
Blunt nose tip
Diameter 2
New this year
Number of drilling steps
Minimum diameter (mm)
Max. drilling diameter (mm)
Countersink (mm)
With deburring machine
Diameter inch (A)
Screw size
Workable materials 33
Milling cutter diameter (mm)
Total number of tools
Width (mm)
Diameter (mm)/Maximum value
Shank stepdrill mm
Spiral length
Total length inch (B)
Width stepdrill mm
Ø (mm)
Working length B (mm)
Workable materials 30
Workable materials 32
RPM up to, hard non-ferrous metals
Workable materials 34
Suitable for solid wood
Form
RPM up to, steels above 700 N/mm²
Shaft, shape
With shaft
Standard ISO metric size
Drill diameter
Cutting material
PRODUCT TYPE
Diameter D
Useful length
CounterboreReach (Min-Max Ø)
Connection
Shaft diameter mm
Variant
Diameter Ø (d1)
Recording
Overall length (L2)
APPLICATIONS
Relation Diameter-Cutting length (xD)
LENGTH
Useful length
Useful length mm
Form
Flute length from till (l2)
Shaft diameter (d)
WORKING LENGTH
Shaft diameter (d) mm
Number of segments
Base material
Number of teeth (z)
Axle intake
Health and safety
Min. pre-drilling diameter (d3)
Diameter (D)
Cutting depth (ap)
Weight oz oz
Usable length mm (D)
Shank diameter mm (C)
Diameter mm (A)
Total length mm (B)
Weight g
Diameter Ø (d3)
MATERIAL
Usable length (L1)
Pre-drilling
Point type
Usable length (mm)
Diameter (mm)
Overall length (mm)
Spiral type
Shank Ø (d2)
Point angle
Flute length (l2)
Quality
Tolerance d1 (Tol. d1)
Coolant feed
Cutting direction
Surface
Drill diameter (d1)
Total length (l1)
Tool material
Tolerance d2 (Tol. d2)
Working length (mm)
Overall length mm
Useful length (L1) mm
MAX. CUTTING CAPACITY AT 45° [SQUARE PROFILE]
WEIGHT
DIAMETER
THICKNESS
Standard
PERFORMANCE
Diameter mm
Overall length (L2) mm
Shank (d2)
Cutting depth
Shank type
Diameter (D) mm
Working length
Tube Ø
Internal diameter
Length
Working length (l3)
Metric (M)
Shaft length
Porphyry
Bore Ø (d2)
Processing tasks
Asphalt
Gas concrete blocks
Fits DCM2 250C & DCM2 350C
Stripping bar
Nominal diameter
Second length (l4)
Bit size
Take-up shaft
Diameter inch
Workable materials (detail)
Diameter
Diameter (D) 2
Stair height mm
Segment height
Length (mm)
Stair diameter (range) mm
Collet (mm)
Ø shaft metric
Length, total
Useful length L2)
Dimensions
Self service - packing
Overall length (mm)
Length (l2)
Outer diameter mm
Contains diameters (Ø mm)
with battery / rechargeable battery
Tool for electrics
Suitable for
Marble
Matching anchor type
ESD article
X-LOCK
Number per pack
Size thread (M)
Diameter (D) inch
Suitable for plastic
Suitable for stainless steel
Suitable for steel
Suitable for wood
Implementation
Shaft diameter (D)
Shaft diameter (mm)
Shaft diameter d
Key width (d) inch
Width (d) mm
Overall length
Shaft diameter
Specification
Segment height mm
Min. order quantity
Suitable for non-ferrous metals
Suitable for cast iron
Lime and sandstone blocks - extra hard
Recording system
With centre drill
Granite
Quantity
Artificial stone
Radius (r)
Segment height (mm)
Spiral length
Drill diameter (mm)
Step height
Drilling crown depth (L1) mm
Number
Cutting edges, number
Suitable for concrete
Suitable for stone
Suitable for ceramics
Suitable for glass
Diameter (inch)

Buy a Gift Card

Gift Card

festool_492523

FESTOOL BSTA HS D 3,5 CE countersink for cordless drill/drivers with CENTROTEC interface - 492523

  • Diameter: 3,5 mm
On stock, immediately available.
Recommended Retail Price €89.59
68.60
€56.69 excl. VAT
festool_492525

FESTOOL ZB HS D 5 EURO CE centring drill - 492525

  • Diameter: 5 mm
  • Quantity per blister: 1
On stock, immediately available.
Recommended Retail Price €89.59
62.80
€51.90 excl. VAT
milwaukee_48899335

MILWAUKEE 48899335 step drill bit 6-35 mm (14 increments of 2 and 3 mm)

  • Smallest diameter: 6 mm
  • Largest diameter: 35 mm
  • Shank size: 10 mm
On stock, immediately available.
Recommended Retail Price €113.68
55.80
€46.11 excl. VAT
festool_492524

FESTOOL BSTA HS D 4,5 CE countersink for cordless drill/drivers with CENTROTEC interface - 492524

  • Diameter: 4,5 mm
On stock, immediately available.
Recommended Retail Price €94.33
65.60
€54.21 excl. VAT
festool_491077

FESTOOL HW S8 D35 hardware drill - 491077

  • Diameter: 35 mm
  • Drill bit type: Wood drill bit
  • Shank size: 8 mm
On stock, immediately available.
Recommended Retail Price €104.79
77.80
€64.30 excl. VAT
festool_491066

FESTOOL HW S8 D5/30 Z dowel drill bit hw shank 8 mm - 491066

  • Diameter: 5 mm
  • Drill bit type: Dowel drill bit
  • Overall length: 53.5 mm
On stock, immediately available.
Recommended Retail Price €37.56
31.80
€26.28 excl. VAT
festool_492520

FESTOOL QLS D 2- 8 CE cross-hole countersink bit - 492520

  • Min. countersink diameter: 2 mm
  • Max. countersink diameter: 8 mm
On stock, immediately available.
Recommended Retail Price €47.69
38.20
€31.57 excl. VAT
carat_hts1026040

CARAT HTS1026040 Brilliant brick box drill 102 x 60mm M16 Dustec

  • Diameter: 102 mm
  • Connection type (machine): Inner thread
  • Connection size (machine): M16
On stock, immediately available.
Recommended Retail Price €145.20
108.60
€89.75 excl. VAT
facom_678006

FACOM 678006 stepped ISO drill bit

  • Smallest diameter: 6,5 mm
  • Shank size: 10 mm
  • Supplier warranty: FACOM - Legal warranty applicable
On stock, immediately available.
Recommended Retail Price €106.48
91.20
€75.37 excl. VAT
festool_492521

FESTOOL QLS D 5-15 CE cross-hole countersink bit - 492521

  • Min. countersink diameter: 5 mm
  • Max. countersink diameter: 15 mm
On stock, immediately available.
Recommended Retail Price €58.58
43.20
€35.70 excl. VAT
milwaukee_48899320

MILWAUKEE 48899320 increment borer 4-20 mm (9 2-mm increments)

  • Smallest diameter: 4 mm
  • Largest diameter: 20 mm
  • Shank size: 8 mm
On stock, immediately available.
Recommended Retail Price €71.39
33.40
€27.60 excl. VAT
spit_654763

SPIT 654763 DRY-X-FORCE diamond drill bit M16 D.102x85mm

  • Diameter: 102 mm
  • Length: 85 mm
  • Connection size (machine): M16
On stock, immediately available.
Recommended Retail Price €244.97
144.20
€119.17 excl. VAT
festool_491072

FESTOOL HW S8 D20 hardware drill - 491072

  • Diameter: 20 mm
  • Drill bit type: Wood drill bit
  • Shank size: 8 mm
On stock, immediately available.
Recommended Retail Price €82.12
61.80
€51.07 excl. VAT
festool_203165

FESTOOL KVB-HW D15 CE hardware drill - 203165

  • Diameter: 15 mm
  • Drill bit type: Wood drill bit
  • Shank type: Hex
On stock, immediately available.
Recommended Retail Price €80.04
58.80
€48.59 excl. VAT
spit_654752

SPIT 654752 DRY-X-FORCE diamond drill bit SDD D.68x200mm

  • Diameter: 68 mm
  • Length: 200 mm
  • Connection type (machine): SDD
Delivery time average 3 days.
Recommended Retail Price €281.72
165.95
€137.15 excl. VAT
festool_202392

FESTOOL BSTA HS D 4 L60 CE countersink for cordless drill/drivers with CENTROTEC interface - 202392

  • Diameter: 4 mm
On stock, immediately available.
Recommended Retail Price €98.07
75.60
€62.48 excl. VAT
milwaukee_48899332

MILWAUKEE 48899332 step drill bit M 6 - M 32

  • Smallest diameter: 6 mm
  • Largest diameter: 32 mm
  • Shank size: 10 mm
On stock, immediately available.
Recommended Retail Price €128.14
53.80
€44.46 excl. VAT
festool_492522

FESTOOL BTA HW D 5 CE drill with depth stop - 492522

  • Min. diameter: 5 mm
  • Max. diameter: 5 mm
On stock, immediately available.
Recommended Retail Price €68.56
54.40
€44.96 excl. VAT
carat_hts1126040

CARAT HTS1126040 Brilliant brick box drill 112 x 60mm M16 Dustec

  • Diameter: 112 mm
  • Connection type (machine): Inner thread
  • Connection size (machine): M16
On stock, immediately available.
Recommended Retail Price €151.25
112.40
€92.89 excl. VAT
bosch_2608900149

BOSCH 2608900149 Expert hammer drill SDS-Plus-7X, 22x950x1000mm

  • Diameter: 22 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 1000 mm
On stock, immediately available.
Recommended Retail Price €254.72
114.80
€94.88 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.