r: 08100193 p: 61.942 pid: 172973 b: MARTOR q: 0 st: lt: 8 ean: 4002632803659 sr: MARTOR 13510.39 sr_no_br: 13510.39 sr_no_br_cl: 1351039 sr_cl: MARTOR1351039 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 22 mm Thickness 0,1 mm Length 43 mm n: MARTOR 13510.39 spare blades industrial blade 13510 standard cutter (250 pcs.) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description INDUSTRIAL BLADE NO. 13510 from MARTOR is a high-quality blade made of stainless steel. It is very sharp and has two cutting edges that can be used one after the other for an especially long service life. The blade is 43 mm long, 22 mm wide and 0. 10 mm thick.INDUSTRIAL BLADE NO. 13510 is available under order number 13510. 39 as 250 paper-wrapped pieces. Ground: Standard ground Blade facets: Single bevel edge-ground Blade characteristics: 4-cutting edge blade Basic material: Stainless steel ds: dsc: kts: spare blades industrial blade 13510 standard cutter (250 pcs.) kpn: 13510.39 kpn_dash: kpn_clear: 1351039 bkpn: MARTOR 13510.39 bkpn_clear: MARTOR 1351039 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 1351039 sr_ns: MARTOR13510.39
r: 08100194 p: 39.504 pid: 172952 b: MARTOR q: 0 st: lt: 7 ean: 4002632803826 sr: MARTOR 170170.02 sr_no_br: 170170.02 sr_no_br_cl: 17017002 sr_cl: MARTOR17017002 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 16 mm Length 175 mm n: MARTOR 170170.02 TRIMMEX CERACUT with ceramic blade 170 cn: DEBURRING TOOL cn2: DEBURRING TOOL cn_clear: DEBURRINGTOOL d: Product description Straight blade: The straight but slightly arched cutting edge enables you to remove excess material exactly in line with the contours and to improve surfaces. It's best to store spare blades in the handle. Easy blade changing: Just remove the cutter cap at the back and push the round opening further to the front. Turn it around once - and the blade has been released. Space for spare blades: Under the cap also lies concealed an ideal storage place for your spare blades. Cap down, blades in - and always at hand, until needed. Ceramic for deburring. With a straight blade. Why are ceramic blades ideal for deburring plastics and metals? Because they are very resistant und durable due to their enormous hardness. That's why the TRIMMEX CERACUT can smooth edges and remove sprayed points and separation lines from mould halves. Furthermore, the characteristic grinding of the MARTOR ceramic blade minimizes your personal risk of injury. Basic material: Plastic Straight blade The straight but slightly arched cutting edge enables you to remove excess material exactly in line with the contours and to improve surfaces. It's best to store spare blades in the handle. Easy blade changing Just remove the cutter cap at the back and push the round opening further to the front. Turn it around once - and the blade has been released. Under the cap also lies concealed an ideal storage place for your spare blades. Cap down, blades in - and always at hand, until needed. Main cutting materials:Plastic burr Rubber burr Metal burr ds: dsc: kts: TRIMMEX CERACUT with ceramic blade 170 kpn: 170170.02 kpn_dash: kpn_clear: 17017002 bkpn: MARTOR 170170.02 bkpn_clear: MARTOR 17017002 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Deburring tools / Deburring tool | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor sanding, grinding and deburring tools / Martor deburring tools / Martor deburring tool sr_no_br_cl_ns: 17017002 sr_ns: MARTOR170170.02
r: 03308585 p: 29.586 pid: 172987 b: MARTOR q: 0 st: lt: 6 ean: 4002632804236 sr: MARTOR 610002.02 sr_no_br: 610002.02 sr_no_br_cl: 61000202 sr_cl: MARTOR61000202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Blade with 19 mm Detection MDP (Metal detectable plastic) n: MARTOR 610002.02 SECUNORM 610 XDR safety knife with trapezoid blade 160099 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The SECUNORM 610 XDR is equipped with automatic blade retraction: as soon as you release the lever, the blade disappears into the handle - and it stays there too. This provides a high degree of safety from cut injuries. Dirt protection: The SECUNORM 610 XDR's open design has several benefits. Dust and other particles won't stick and moveable parts stay moveable. The lever and blade retraction features then continue to function even under the most difficult conditions. Easy to clean: Extra tough dirt is also no problem! Open the lever downwards to expose the components. Everything can now be cleaned as required, e. g. , with compressed air, water or acetone. But remove the blade first! Stainless steel blade: TRAPEZOID BLADE NO. 160099 is ideal for single-layer film and paper bags. Stronger materials with increased cutting resistance can also be cut quickly and safely. 2-times usuable blade. Practical 3-in-1 lever: The bag opener is one of MARTOR's highly ergonomic squeeze-grip knives. The lever is smooth and finger-light to operate. It can be securely locked in place or folded out of the handle for blade changing. Robust and detectable: Advanced ergonomics are not the only special features of the SECUNORM 610 XDR. The aluminium, unpainted handle and plastic components are also very robust for professional use. All parts are stainless and metal detectable. Doing the dirty work. With stainless, rounded-tip trapezoid blade. The SECUNORM 610 XDR is the first universal bag opener that cuts efficiently AND safely. Use it to open bags of any kind and thickness, and any content. XDR means e Xtra Dirt Resistant, i. e. , even dusty, liquid or sticky contents won't stop the safety knife. The blade automatically retracts after cutting on releasing the lever. Users are then also resistant - resistant to cutting injuries. Basic material: Aluminium| Metal detectable plastic Dirt protection The SECUNORM 610 XDR's open design has several benefits. Dust and other particles won't stick and moveable parts stay moveable. The lever and blade retraction features then continue to function even under the most difficult conditions. Easy to clean Extra tough dirt is also no problem! Open the lever downwards to expose the components. Everything can now be cleaned as required, e. g. , with compressed air, water or acetone. But remove the blade first!TRAPEZOID BLADE NO. 160099 is ideal for single-layer film and paper bags. Stronger materials with increased cutting resistance can also be cut quickly and safely. 2-times usuable blade. Practical 3-in-1 lever The bag opener is one of MARTOR's highly ergonomic squeeze-grip knives. The lever is smooth and finger-light to operate. It can be securely locked in place or folded out of the handle for blade changing. Robust and detectable Advanced ergonomics are not the only special features of the SECUNORM 610 XDR. The aluminium, unpainted handle and plastic components are also very robust for professional use. All parts are stainless and metal detectable. ds: dsc: kts: SECUNORM 610 XDR safety knife with trapezoid blade 160099 kpn: 610002.02 kpn_dash: kpn_clear: 61000202 bkpn: MARTOR 610002.02 bkpn_clear: MARTOR 61000202 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 61000202 sr_ns: MARTOR610002.02
r: 03310365 p: 29.586 pid: 172981 b: MARTOR q: 0 st: lt: 4 ean: 4002632804229 sr: MARTOR 610001.02 sr_no_br: 610001.02 sr_no_br_cl: 61000102 sr_cl: MARTOR61000102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Blade with 18,9 mm Detection MDP (Metal detectable plastic) n: MARTOR 610001.02 SECUNORM 610 XDR safety knife with special blade large model 160060 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The SECUNORM 610 XDR is equipped with automatic blade retraction: as soon as you release the lever, the blade disappears into the handle - and it stays there too. This provides a high degree of safety from cut injuries. Dirt protection: The SECUNORM 610 XDR's open design has several benefits. Dust and other particles won't stick and moveable parts stay moveable. The lever and blade retraction features then continue to function even under the most difficult conditions. Easy to clean: Extra tough dirt is also no problem! Open the lever downwards to expose the components. Everything can now be cleaned as required, e. g. , with compressed air, water or acetone. But remove the blade first! Long, stainless special blade: The new, extremely sharp LARGE SPECIAL PURPOSE BLADE NO. 160060 has a 32 mm cutting depth. Ideal for quick and safe cutting of everything from a simple foil bag to multi-layer kraft paper with inliner. Practical 3-in-1 lever: The bag opener is one of MARTOR's highly ergonomic squeeze-grip knives. The lever is smooth and finger-light to operate. It can be securely locked in place or folded out of the handle for blade changing. Robust and detectable: Advanced ergonomics are not the only special features of the SECUNORM 610 XDR. The aluminium, unpainted handle and plastic components are also very robust for professional use. All parts are stainless and metal detectable. Doing the dirty work. With rounded special blade. The SECUNORM 610 XDR is the first universal bag opener that cuts efficiently AND safely. Use it to open bags of any kind and thickness, and any content. XDR means e Xtra Dirt Resistant, i. e. , even dusty, liquid or sticky contents won't stop the safety knife. The blade automatically retracts after cutting on releasing the lever. Users are then also resistant - resistant to cutting injuries. Basic material: Aluminium| Metal detectable plastic Dirt protection The SECUNORM 610 XDR's open design has several benefits. Dust and other particles won't stick and moveable parts stay moveable. The lever and blade retraction features then continue to function even under the most difficult conditions. Easy to clean Extra tough dirt is also no problem! Open the lever downwards to expose the components. Everything can now be cleaned as required, e. g. , with compressed air, water or acetone. But remove the blade first!The new, extremely sharp LARGE SPECIAL PURPOSE BLADE NO. 160060 has a 32 mm cutting depth. Ideal for quick and safe cutting of everything from a simple foil bag to multi-layer kraft paper with inliner. Practical 3-in-1 lever The bag opener is one of MARTOR's highly ergonomic squeeze-grip knives. The lever is smooth and finger-light to operate. It can be securely locked in place or folded out of the handle for blade changing. Robust and detectable Advanced ergonomics are not the only special features of the SECUNORM 610 XDR. The aluminium, unpainted handle and plastic components are also very robust for professional use. All parts are stainless and metal detectable. ds: dsc: kts: SECUNORM 610 XDR safety knife with special blade large model 160060 kpn: 610001.02 kpn_dash: kpn_clear: 61000102 bkpn: MARTOR 610001.02 bkpn_clear: MARTOR 61000102 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 61000102 sr_ns: MARTOR610001.02
r: 41271410 p: 27.933 pid: 173019 b: MARTOR q: 0 st: lt: 7 ean: 4002632901157 sr: MARTOR 1044.29 sr_no_br: 1044.29 sr_no_br_cl: 104429 sr_cl: MARTOR104429 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 39 mm Quantity per box 100 n: MARTOR 1044.29 spare wing blade 1044 standard cutter (100 pcs) cn: REPLACEMENT BLADE FOR SCRAPER cn2: REPLACEMENT BLADE FOR SCRAPER cn_clear: REPLACEMENTBLADEFORSCRAPER d: Product description REINFORCED RAZOR BLADE NO. 1044 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 39. 5 mm long, 19. 7 mm wide and 0. 25 mm thick.REINFORCED RAZOR BLADE NO. 1044 is available under order number 1044. 29 in a box of 100. Ground: Standard ground Blade facets: Single bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Steel ds: dsc: kts: spare wing blade 1044 standard cutter (100 pcs) kpn: 1044.29 kpn_dash: kpn_clear: 104429 bkpn: MARTOR 1044.29 bkpn_clear: MARTOR 104429 c_path: Home / Tools / Hand tools / Files, graters and scrapers / Accessories and spare parts / Replacement blade for scraper | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor files, graters and scrapers / Martor accessories and spare parts / Martor replacement blade for scraper sr_no_br_cl_ns: 104429 sr_ns: MARTOR1044.29
r: 03295370 p: 27.933 pid: 172963 b: MARTOR q: 0 st: lt: 8 ean: 4002632803598 sr: MARTOR 625095.02 sr_no_br: 625095.02 sr_no_br_cl: 62509502 sr_cl: MARTOR62509502 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 625095.02 SECUPRO 625 safety knife with trapezoid blade 60095 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO 625 guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even when the lever is still being squeezed. Excellent ergonomics: We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it! Robust and balanced: You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. Not even when cutting very heavily. For heavy-duty use: Tough cutting materials or changes in cutting direction present no problems for the SECUPRO 625 with its short trapezoidal blade. This makes the knife ideal for high-resistance cutting tasks, e. g. rubber or material off a roll. Goods protection: With a cutting depth of "just" 15 mm, most types of packaging can be opened without the blade coming into contact with the contents. Extra protection is also provided by the rounded blade tip. Safe along the line: While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. Long lever. Short blade. Long-lasting enjoyment. With rounded trapezoid blade. The SECUPRO 625 with short blade extension is also one of our best ergonomic squeeze-grip knives. Its aspiration is very clear: premium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the blade, shorter cutting depth combined with a very high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands. Basic material: Aluminium Excellent ergonomics We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it!Robust and balanced You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. Not even when cutting very heavily. Tough cutting materials or changes in cutting direction present no problems for the SECUPRO 625 with its short trapezoidal blade. This makes the knife ideal for high-resistance cutting tasks, e. g. rubber or material off a roll. Goods protection With a cutting depth of "just" 15 mm, most types of packaging can be opened without the blade coming into contact with the contents. Extra protection is also provided by the rounded blade tip. Safe along the line While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. ds: dsc: kts: SECUPRO 625 safety knife with trapezoid blade 60095 kpn: 625095.02 kpn_dash: kpn_clear: 62509502 bkpn: MARTOR 625095.02 bkpn_clear: MARTOR 62509502 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 62509502 sr_ns: MARTOR625095.02
r: 03295365 p: 27.107 pid: 172938 b: MARTOR q: 0 st: lt: 5 ean: 4002632803970 sr: MARTOR 625016.02 sr_no_br: 625016.02 sr_no_br_cl: 62501602 sr_cl: MARTOR62501602 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 625016.02 SECUPRO 625 safety knife with trapezoid blade 160099 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO 625 guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even when the lever is still being squeezed. Excellent ergonomics: We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it! Robust and balanced: You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. Not even when cutting very heavily. Large cutting depth: The long blade extension is ideal for cutting up to 3-ply cardboard boxes, rubber, material on reels and many more applications. The blade can be changed in a few steps - by operating the blade change button and pressing the lever, it can be easily pulled out. For many cutting types: The overall package of the SECUPRO 625 is quite unique - and so are all separate features. Even saw cutting is safe - thanks to the protecting blade retraction. And you can enlarge the number of different application areas by simply installing one of the optional blades. Safe along the line: While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. Long lever. Long blade. Long-lasting enjoyment. With stainless, rounded-tip trapezoid blade. The SECUPRO 625 is at the forefront of our ergonomic squeeze-grip knives. Its aspiration is very clear: premium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the stainless steel blade, an extra large cutting depth combined high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands. Basic material: Aluminium Excellent ergonomics We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it!Robust and balanced You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. Not even when cutting very heavily. The long blade extension is ideal for cutting up to 3-ply cardboard boxes, rubber, material on reels and many more applications. The blade can be changed in a few steps - by operating the blade change button and pressing the lever, it can be easily pulled out. For many cutting types The overall package of the SECUPRO 625 is quite unique - and so are all separate features. Even saw cutting is safe - thanks to the protecting blade retraction. And you can enlarge the number of different application areas by simply installing one of the optional blades. Safe along the line While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. ds: dsc: kts: SECUPRO 625 safety knife with trapezoid blade 160099 kpn: 625016.02 kpn_dash: kpn_clear: 62501602 bkpn: MARTOR 625016.02 bkpn_clear: MARTOR 62501602 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 62501602 sr_ns: MARTOR625016.02
r: 41978194 p: 24.628 pid: 173056 b: MARTOR q: 0 st: lt: 6 ean: 4002632918346 sr: MARTOR 116002.02 sr_no_br: 116002.02 sr_no_br_cl: 11600202 sr_cl: MARTOR11600202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 116002.02 SECUPRO MEGASAFE safety knife with hook blade 98 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO MEGASAFE guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even if the slider is still being activated. Robust handle: The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening: Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. Perfect handling: The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider: With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself! 2-cutting edge blade: Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Quality that's visible. With hook blade. Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 14 mm it does not shy away from any challenge. Your safety is still guaranteed since the fully automatic blade retraction functions even when you decide not to fully extend the blade. Ideal for cutting textiles, yarn, bands, carpets, film and plastic hoops. Basic material: Aluminium Robust handle The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself!2-cutting edge blade Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Main cutting materials:Cardboard: up to 3-ply Plastic strapping band Slabbing material off a roll Bagged goods ds: dsc: kts: SECUPRO MEGASAFE safety knife with hook blade 98 kpn: 116002.02 kpn_dash: kpn_clear: 11600202 bkpn: MARTOR 116002.02 bkpn_clear: MARTOR 11600202 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 11600202 sr_ns: MARTOR116002.02
r: 02615530 p: 23.801 pid: 172902 b: MARTOR q: 89 st: 1 lt: 1 ean: 4002632921322 sr: MARTOR 564001.00 sr_no_br: 564001.00 sr_no_br_cl: 56400100 sr_cl: MARTOR56400100 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: MARTOR 564001.00 SECUMAX 564 safety scissors cn: SCISSORS cn2: SCISSORS cn_clear: SCISSORS d: Product description Safe special ground - maximum safety The cutting edges are not angled, but straight ground. This means: No danger for your fingers. Therefore our safety scissors all carry the name SECUMAX = maximum safety. Sharp, but not dangerous: Take a look at the cutting edges. Noticed anything? They are not ground at an angle, but at right angles. Therefore you cannot cut yourself, only the large range of potential materials. Stainless steel: You will be able to use your scissors for a very long time as the metal parts are made from stainless steel. The handles have been coated in a plastic reinforced with fibreglass. Another guarantee for a long service life. Comfortable working: The experts call them "eyes" and these are the two openings in which you insert your fingers to securely hold the scissors. The "soft grip" on the insides also helps to ensure comfortable and non-slip working. Extra-long cutting edges: Fast and controlled - you will cut through easily using the SECUMAX 564. Fast, thanks to the long cutting edges. Controlled, as the entire length from the finger opening to the tip can be used as a support surface. Sturdy connection: A matter of course for quality scissors: Both of the cutting edges are held together by a real screw. This ensures sturdy connection and permanent high cutting power. Thumbs up - for very long cuts. The SECUMAX 564 is characterized by its thumb opening and its extra-long edge, which also makes an ideal support surface. These safety scissors enable you to completely control your work. Moreover, you need fewer cuts to complete the job of cutting through cardboard, paper, film, fabric and much more. Highest safety guaranteed by the special sharpening of the cutting edges and the rounded tips. Basic material: Stainless steel Sharp, but not dangerous Take a look at the cutting edges. Noticed anything? They are not ground at an angle, but at right angles. Therefore you cannot cut yourself, only the large range of potential materials. Stainless steel You will be able to use your scissors for a very long time as the metal parts are made from stainless steel. The handles have been coated in a plastic reinforced with fibreglass. Another guarantee for a long service life. The experts call them "eyes" and these are the two openings in which you insert your fingers to securely hold the scissors. The "soft grip" on the insides also helps to ensure comfortable and non-slip working. Extra-long cutting edges Fast and controlled - you will cut through easily using the SECUMAX 564. Fast, thanks to the long cutting edges. Controlled, as the entire length from the finger opening to the tip can be used as a support surface. Sturdy connection A matter of course for quality scissors: Both of the cutting edges are held together by a real screw. This ensures sturdy connection and permanent high cutting power. Main cutting materials:Cardboard: up to 2-ply Plastic strapping band Layers of foil or paper Textile, material Yarn, cord Wrapping, stretch and shrink foil ds: dsc: kts: SECUMAX 564 safety scissors kpn: 564001.00 kpn_dash: kpn_clear: 56400100 bkpn: MARTOR 564001.00 bkpn_clear: MARTOR 56400100 c_path: Home / Tools / Hand tools / Cutting and bending tools / Scissors / Scissors | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor scissors / Martor scissors sr_no_br_cl_ns: 56400100 sr_ns: MARTOR564001.00
r: 02624126 p: 22.975 pid: 172916 b: MARTOR q: 21 st: 1 lt: 1 ean: 4002632921391 sr: MARTOR 674.50 sr_no_br: 674.50 sr_no_br_cl: 67450 sr_cl: MARTOR67450 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 32 mm Quantity per box 10 n: MARTOR 674.50 spare blades trimming blade 674 special sharpening (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description TRIMMING BLADE NO. 674 from MARTOR is a high-quality blade made of stainless steel. It is 30. 5 mm long, 8. 8 mm wide and 0. 50 mm thick. The oil used for the blade is food safe.TRIMMING BLADE NO. 674 is available under order number 674. 50 in a magazine of 10. The blade can be used in the following MARTOR knives: GRAFIX 501, GRAFIX PICCOLO. Ground: Special grinding Blade characteristics: 1-cutting edge blade Basic material: Stainless steel ds: dsc: kts: spare blades trimming blade 674 special sharpening (10 pcs) kpn: 674.50 kpn_dash: kpn_clear: 67450 bkpn: MARTOR 674.50 bkpn_clear: MARTOR 67450 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 67450 sr_ns: MARTOR674.50
r: 03295373 p: 22.975 pid: 172977 b: MARTOR q: 0 st: lt: 8 ean: 4002632804021 sr: MARTOR 625098.02 sr_no_br: 625098.02 sr_no_br_cl: 62509802 sr_cl: MARTOR62509802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 625098.02 SECUPRO 625 safety knife with hook blade 98 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO 625 guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even when the lever is still being squeezed. Excellent ergonomics: We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it! Robust and balanced: You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. Specialist usage: The hook blade is ideal for any kind of floor covering, but also for many other uses. The blade can be changed in a few easy steps - by lifting the blade change button and pressing the lever. 2-cutting edge blade: Before you have to change the quality blade, you can turn it around once. This doubles the usage time of the blade - and reduces the energy you use up. Because your product cuts like new again. Safe along the line: While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. Long lever. Long blade. Long-lasting enjoyment. With hook blade. The SECUPRO 625 is at the forefront of our ergonomic squeeze-grip knives. Its aspiration is very clear: premium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the blade, a large cutting depth combined with a very high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands. Basic material: Aluminium Excellent ergonomics We have rarely produced a cutting tool before that fits so perfectly into the heavy users hand as the SECUPRO 625. The long and smooth lever, the round shape of the handle and the soft grip at the back of the knife - it's more than worth testing it!Robust and balanced You can see and feel that the handle is made of high-quality aluminium. Its robust construction goes hand in hand with an optimal weight distribution. Consequently, there's almost no risk of weakening for tool and user. The hook blade is ideal for any kind of floor covering, but also for many other uses. The blade can be changed in a few easy steps - by lifting the blade change button and pressing the lever. 2-cutting edge blade Before you have to change the quality blade, you can turn it around once. This doubles the usage time of the blade - and reduces the energy you use up. Because your product cuts like new again. Safe along the line While you rely on the blade retraction at the front part of the handle, there's another safety feature built in for even more protection. You can lock the lever and thus avoid that the blade is released unintentionally. ds: dsc: kts: SECUPRO 625 safety knife with hook blade 98 kpn: 625098.02 kpn_dash: kpn_clear: 62509802 bkpn: MARTOR 625098.02 bkpn_clear: MARTOR 62509802 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 62509802 sr_ns: MARTOR625098.02
r: 02391344 p: 22.975 pid: 172925 b: MARTOR q: 15 st: 1 lt: 1 ean: 4002632920073 sr: MARTOR 122001.02 sr_no_br: 122001.02 sr_no_br_cl: 12200102 sr_cl: MARTOR12200102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 122001.02 SECUPRO MARTEGO safety knife with industrial blade 92 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO MARTEGO guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even when the lever is still being squeezed. Perfect handling: The advantages of the SECUPRO MARTEGO lie in your hands. The ergonomic squeeze-grip, the soft grip for better handling, the "pre-set" cutting edge; these three factors guarantee an ergonomic experience. Change safely: When you need to change the blade, you can do so without any additional tools. Here, the "attraction" of the SECUPRO MARTEGO is revealed: the integrated magnet ensures that the blade cannot fall out. Everything under control: It's all about aluminium. The powder-coated metal body does not only contribute to the SECUPRO MARTEGO's extraordinary design. It credits the safety knife with extreme robustness and durability. Blade lock for extra protection: Your SECUPRO MARTEGO accompanies you on your job at every cut and turn? Glad to hear it. But always press the blue blade lock when you've finished cutting! This way the blade cannot make a surprise appearance. 4-cutting edge blade: The quality blade, with its four sharp edges, can be rotated multiple times. It's worth it! In the meantime, a relatively small cutting depth protects your goods from unnecessary damage. For highest demands. A cutting tool in which function and design go hand in hand? Meet the SECUPRO MARTEGO, our prize winning squeeze-grip safety knife with fully automatic blade retraction. Get used to the word "very" in its presence: it's very safe, very robust, very ergonomic, very versatile, and made to very high standards. This knife is not only suitable for both right and left-handed users, but also for those with larger hands. Basic material: Aluminium Perfect handling The advantages of the SECUPRO MARTEGO lie in your hands. The ergonomic squeeze-grip, the soft grip for better handling, the "pre-set" cutting edge; these three factors guarantee an ergonomic experience. Change safely When you need to change the blade, you can do so without any additional tools. Here, the "attraction" of the SECUPRO MARTEGO is revealed: the integrated magnet ensures that the blade cannot fall out. It's all about aluminium. The powder-coated metal body does not only contribute to the SECUPRO MARTEGO's extraordinary design. It credits the safety knife with extreme robustness and durability. Blade lock for extra protection Your SECUPRO MARTEGO accompanies you on your job at every cut and turn? Glad to hear it. But always press the blue blade lock when you've finished cutting! This way the blade cannot make a surprise appearance. 4-cutting edge blade The quality blade, with its four sharp edges, can be rotated multiple times. It's worth it! In the meantime, a relatively small cutting depth protects your goods from unnecessary damage. Main cutting materials:Cardboard: up to 2-ply Tape Plastic strapping band Slabbing material off a roll ds: dsc: kts: SECUPRO MARTEGO safety knife with industrial blade 92 kpn: 122001.02 kpn_dash: kpn_clear: 12200102 bkpn: MARTOR 122001.02 bkpn_clear: MARTOR 12200102 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 12200102 sr_ns: MARTOR122001.02
r: 03343156 p: 22.809 pid: 172983 b: MARTOR q: 0 st: lt: 9 ean: 4002632804090 sr: MARTOR 170.54 sr_no_br: 170.54 sr_no_br_cl: 17054 sr_cl: MARTOR17054 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 60 mm Thickness 1,7 mm n: MARTOR 170.54 spare ceramic blade 170 cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description CERAMIC BLADE NO. 170 from MARTOR is a high-quality blade made of ceramic. It is 60 mm long, 15 mm wide and 1. 70 mm thick.CERAMIC BLADE NO. 170 is available under order number 170. 54 in a magazine of 1. The blade can be used in the following MARTOR knives: TRIMMEX CERACUT. Blade characteristics: 1-cutting edge blade Basic material: Ceramic ds: dsc: kts: spare ceramic blade 170 kpn: 170.54 kpn_dash: kpn_clear: 17054 bkpn: MARTOR 170.54 bkpn_clear: MARTOR 17054 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 17054 sr_ns: MARTOR170.54
r: 41271493 p: 22.148 pid: 173031 b: MARTOR q: 0 st: lt: 8 ean: 4002632904424 sr: MARTOR 32.50 sr_no_br: 32.50 sr_no_br_cl: 3250 sr_cl: MARTOR3250 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 52 mm Quantity per box 10 n: MARTOR 32.50 spare blades graphic blade 32 special sharpening (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description GRAPHIC BLADE NO. 32 from MARTOR is a high-quality blade made of steel. It is very sharp and has several different cutting edges for a long service life. The blade is 51. 5 mm long, 5. 7 mm wide and 0. 63 mm thick.GRAPHIC BLADE NO. 32 is available under order number 32. 50 in a magazine of 10. The blade can be used in the following MARTOR knives: GRAFIX PICCOLO. Ground: Special grinding Blade facets: Single/ Double bevel edge-ground Blade characteristics: 2-cutting edge blade Basic material: Steel ds: dsc: kts: spare blades graphic blade 32 special sharpening (10 pcs) kpn: 32.50 kpn_dash: kpn_clear: 3250 bkpn: MARTOR 32.50 bkpn_clear: MARTOR 3250 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 3250 sr_ns: MARTOR32.50
r: 41271320 p: 20.495 pid: 173036 b: MARTOR q: 0 st: lt: 8 ean: 4002632005381 sr: MARTOR 538.02 sr_no_br: 538.02 sr_no_br_cl: 53802 sr_cl: MARTOR53802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 538.02 SECUMAX SALVEX SOS safety knife with industrial blade 37040 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX SALVEX SOS blade is not an open one, but is hidden from people and goods. This provides you with the highest degree of safety from cut injuries and from damage to goods. Especially robust: The SECUMAX SALVEX SOS consists of robust plastic and is therefore robust and up for the job. So you can always rely on it for emergencies. And that too, for a long time. Hammer included: Your first-aid cutter will not even be stopped by safety glass. Use the integrated emergency hammer made of specially hardened steel to smash window and side panes. 4-cutting edge blade: Since the blade has four sharp edges, you can turn and turn it over several times. Thanks to the constantly "fresh" blade, a perfectly functioning cutting tool is available to you in emergency situations. For right and left handers: There are situations in which every second counts. That's why the SECUMAX SALVEX SOS is always ready for use. The question of whether you are right or left handed does not arise, as it fits into any hand. Eyelet and holder: Very important: you have your first-aid cutter with you. Also important: you can always find it again quickly. That's why the SECUMAX SALVEX SOS not only has an eyelet for attaching, but also a separate holder for the car. First-aid cutter and hammer in one. In the event of an accident, it's paramount that you react quickly and calmly. An intuitively operable first-aid cutter with multiple uses can be a lifesaving tool. Use the SECUMAX SALVEX SOS to smash the side-window of a crumpled car. Use the concealed blade to cut through seat belts and other trapping materials, and finally, to quickly open clothing. Being able to help is a great thing! Basic material: Plastic Especially robust The SECUMAX SALVEX SOS consists of robust plastic and is therefore robust and up for the job. So you can always rely on it for emergencies. And that too, for a long time. Hammer included Your first-aid cutter will not even be stopped by safety glass. Use the integrated emergency hammer made of specially hardened steel to smash window and side panes. Since the blade has four sharp edges, you can turn and turn it over several times. Thanks to the constantly "fresh" blade, a perfectly functioning cutting tool is available to you in emergency situations. For right and left handers There are situations in which every second counts. That's why the SECUMAX SALVEX SOS is always ready for use. The question of whether you are right or left handed does not arise, as it fits into any hand. Eyelet and holder Very important: you have your first-aid cutter with you. Also important: you can always find it again quickly. That's why the SECUMAX SALVEX SOS not only has an eyelet for attaching, but also a separate holder for the car. Main cutting materials:Safety belt Velcro Fleece Felt ds: dsc: kts: SECUMAX SALVEX SOS safety knife with industrial blade 37040 kpn: 538.02 kpn_dash: kpn_clear: 53802 bkpn: MARTOR 538.02 bkpn_clear: MARTOR 53802 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 53802 sr_ns: MARTOR538.02
r: 02459505 p: 19.669 pid: 172921 b: MARTOR q: 0 st: lt: 8 ean: 4002632918735 sr: MARTOR 116004.02 sr_no_br: 116004.02 sr_no_br_cl: 11600402 sr_cl: MARTOR11600402 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 116004.02 SECUPRO MEGASAFE safety knife with trapezoid blade 199 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO MEGASAFE guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even if the slider is still being activated. Robust handle: The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening: Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. Perfect handling: The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider: With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself! 2-cutting edge blade: Before you need to change the stainless steel quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Quality that's visible. With stainless steel trapezoid blade. Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 20mm it does not shy away from any challenge. Your safety is still guaranteed since the fully automatic blade retraction functions even when you decide not to fully extend the blade. Stainless steel means that your can also use the blade in a moist environment for longer periods without problems. Basic material: Aluminium Robust handle The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself!2-cutting edge blade Before you need to change the stainless steel quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Main cutting materials:Cardboard: up to 3-ply Plastic strapping band Slabbing material off a roll Bagged goods ds: dsc: kts: SECUPRO MEGASAFE safety knife with trapezoid blade 199 kpn: 116004.02 kpn_dash: kpn_clear: 11600402 bkpn: MARTOR 116004.02 bkpn_clear: MARTOR 11600402 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife sr_no_br_cl_ns: 11600402 sr_ns: MARTOR116004.02
r: 02680926 p: 18.347 pid: 172947 b: MARTOR q: 0 st: lt: 8 ean: 4002632919626 sr: MARTOR 112.62 sr_no_br: 112.62 sr_no_br_cl: 11262 sr_cl: MARTOR11262 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 19,1 mm Quantity per box 5 Length 136 mm n: MARTOR 112.62 spare blades special blade large model 112 standard cutter (5 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description LARGE SPECIAL PURPOSE BLADE NO. 112 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 135. 5 mm long, 19. 1 mm wide and 0. 80 mm thick.LARGE SPECIAL PURPOSE BLADE No. 112 is available under order number 112. 62 in a transparent pack of 5. Ground: Standard ground Blade facets: Double bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Steel ds: dsc: kts: spare blades special blade large model 112 standard cutter (5 pcs) kpn: 112.62 kpn_dash: kpn_clear: 11262 bkpn: MARTOR 112.62 bkpn_clear: MARTOR 11262 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 11262 sr_ns: MARTOR112.62
