r: 02459501 p: 22.975 pid: 172920 b: MARTOR q: 0 st: lt: 6 ean: 4002632919893 sr: MARTOR 116006.02 sr_no_br: 116006.02 sr_no_br_cl: 11600602 sr_cl: MARTOR11600602 sr_dash: sold: 1378.5 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 116006.02 SECUPRO MEGASAFE safety knife with trapezoid blade 60099 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO MEGASAFE guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even if the slider is still being activated. Robust handle: The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening: Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. Perfect handling: The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider: With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself! 2-cutting edge blade: Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Quality that's visible. With rounded-tip trapezoid blade. Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 17 mm, this knife doesn't shy away from a challenge. And no matter your task, safety is always guaranteed; the fully automatic blade retraction functions even when you decide to not fully extend the blade. Basic material: Aluminium Robust handle The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself!2-cutting edge blade Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Main cutting materials:Cardboard: up to 3-ply Plastic strapping band Slabbing material off a roll Bagged goods ds: dsc: kts: SECUPRO MEGASAFE safety knife with trapezoid blade 60099 kpn: 116006.02 kpn_dash: kpn_clear: 11600602 bkpn: MARTOR 116006.02 bkpn_clear: MARTOR 11600602 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife sr_no_br_cl_ns: 11600602 sr_ns: MARTOR116006.02
r: 02680029 p: 2.46 pid: 172937 b: MARTOR q: 0 st: lt: 6 ean: 4002632916588 sr: MARTOR 110100.08 sr_no_br: 110100.08 sr_no_br_cl: 11010008 sr_cl: MARTOR11010008 sr_dash: sold: 1180.8 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 110100.08 SECUNORM SMARTCUT safety knife cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM SMARTCUT guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. One use, two advantages: The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process. Slider on both sides: With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself! Light and easy: At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired. Perfect handling: The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there's much more: So that your thumb doesn't slip, the slider has grooves. You can't lose it: As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station. Yes, a cutting tool can be this SMART. With stainless steel blade. Make one cut with this safety knife and you'll know immediately why it's called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting material is SMART. Automatic blade retraction in such a small housing is SMART. Its immense popularity as an attractive promotional knife definitely proves its SMARTness. Basic material: Plastic One use, two advantages The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process. Slider on both sides With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself!At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired. Perfect handling The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there's much more: So that your thumb doesn't slip, the slider has grooves. You can't lose it As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station. Main cutting materials:Wrapping, stretch and shrink foil Tape Cardboard: up to 2-ply Layers of foil or paper ds: dsc: kts: SECUNORM SMARTCUT safety knife kpn: 110100.08 kpn_dash: kpn_clear: 11010008 bkpn: MARTOR 110100.08 bkpn_clear: MARTOR 11010008 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 11010008 sr_ns: MARTOR110100.08
r: 02460839 p: 13.719 pid: 172905 b: MARTOR q: 261 st: 1 lt: 1 ean: 4002632921100 sr: MARTOR 380001.02 sr_no_br: 380001.02 sr_no_br_cl: 38000102 sr_cl: MARTOR38000102 sr_dash: sold: 1097.52 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 380001.02 SECUNORM 380 safety knife with styrofoam blade 79 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM 380 guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. Long blade extension: With a blade extension of exactly 7. 8 cm, the word "long" is somewhat an understatement. This knife can be used to safely cut 4-ply cardboard, open sacks, separate paper sheets, slab rolls, carve building foam, slice polystyrene slabs...the list continues. Tool-less blade change: To change the blade, simply follow the arrow. Pressing down on the small blade change activator releases the capping end of the safety knife, allowing it to swing downwards, and ultimately allowing you to remove the blade carrier and the blade. Ergonomic handle: It goes without saying, the more ergonomic the handle, the easier it is to cut. The SECUNORM 380 with its curved shape, carefully positioned soft grip and ribbed slider, is an ergonomic dream. Particularly robust: The core of this safety knife is a particularly stable and abrasion resistant metal rail. The body of the knife is made from a high grade plastic, capable of fulfilling high expectations. For right and left handers: Right and left handed users alike can be charmed by the SECUNORM 380. Turn the blade 180° according to your preference and to suit your needs. The eyelet at the end of the knife is also great for whenever you want to attach your SECUNORM 380. Our world debut. For special demands. A long bladed safety knife? This has been a contradiction of terms for a very long time. Until now. The SECUNORM 380 is the first safety knife worldwide featuring automatic blade retraction AND a blade extension length of almost 8 cm. If you are looking for a low risk alternative to the usual fixed blade cutter, here is your answer. As an additional safety feature, we've included a transportation lock, to disable any unintended blade activity. Basic material: Glass fibre reinforced plastic Long blade extension With a blade extension of exactly 7. 8 cm, the word "long" is somewhat an understatement. This knife can be used to safely cut 4-ply cardboard, open sacks, separate paper sheets, slab rolls, carve building foam, slice polystyrene slabs...the list continues. Tool-less blade change To change the blade, simply follow the arrow. Pressing down on the small blade change activator releases the capping end of the safety knife, allowing it to swing downwards, and ultimately allowing you to remove the blade carrier and the blade. It goes without saying, the more ergonomic the handle, the easier it is to cut. The SECUNORM 380 with its curved shape, carefully positioned soft grip and ribbed slider, is an ergonomic dream. Particularly robust The core of this safety knife is a particularly stable and abrasion resistant metal rail. The body of the knife is made from a high grade plastic, capable of fulfilling high expectations. For right and left handers Right and left handed users alike can be charmed by the SECUNORM 380. Turn the blade 180° according to your preference and to suit your needs. The eyelet at the end of the knife is also great for whenever you want to attach your SECUNORM 380. ds: dsc: kts: SECUNORM 380 safety knife with styrofoam blade 79 kpn: 380001.02 kpn_dash: kpn_clear: 38000102 bkpn: MARTOR 380001.02 bkpn_clear: MARTOR 38000102 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 38000102 sr_ns: MARTOR380001.02
r: 41973812 p: 22.975 pid: 173001 b: MARTOR q: 22 st: 1 lt: 1 ean: 4002632918322 sr: MARTOR 116001.02 sr_no_br: 116001.02 sr_no_br_cl: 11600102 sr_cl: MARTOR11600102 sr_dash: sold: 689.25 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 116001.02 SECUPRO MEGASAFE safety knife with trapezoid blade 99 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Fully automatic blade retraction - a very high degree of safety The fully automatic blade retraction of the SECUPRO MEGASAFE guarantees a very high degree of safety from cut injuries. The blade withdraws into the handle immediately after leaving the material being cut. Even if the slider is still being activated. Robust handle: The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening: Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. Perfect handling: The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider: With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself! 2-cutting edge blade: Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Quality that's visible. With trapezoid blade. Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 20 mm, this safety knife doesn't shy away from a challenge. And no matter your task, safety is always guaranteed; the fully automatic blade retraction functions even when you decide to not fully extend the blade. Basic material: Aluminium Robust handle The body of our top quality SECUPRO MEGASAFE is 100% aluminium. And ultimately, 100% robust. You can master all manner of standard cutting materials with this safety knife. Even multi-layered ones. Change without opening Blade change is easy and safe. Simply push down on the back end of the rocker device located on the topside of the safety knife, and push the slider completely forward. The blade is ready for changing. The lightly rounded handle fits particularly well in your hand. Your thumb doesn't get a raw deal either: soft grip on the the slider makes for a pleasant, slip-resistant resting pad. Double-sided slider With the right hand? With the left hand? No need to ask this question! The SECUPRO MEGASAFE is fitted with a slider that's accessible from both sides. Choose for yourself!2-cutting edge blade Before you need to change the quality blade, you have the chance to turn it over once. Usage time of the blade is doubled and fatigue is held at bay: with a simple flip of the blade, your SECUPRO MEGASAFE will cut like new. Main cutting materials:Cardboard: up to 3-ply Plastic strapping band Slabbing material off a roll Bagged goods ds: dsc: kts: SECUPRO MEGASAFE safety knife with trapezoid blade 99 kpn: 116001.02 kpn_dash: kpn_clear: 11600102 bkpn: MARTOR 116001.02 bkpn_clear: MARTOR 11600102 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 11600102 sr_ns: MARTOR116001.02
r: 03177848 p: 2.22 pid: 172931 b: MARTOR q: 0 st: lt: 4 ean: 4002632800658 sr: MARTOR 145001.12 sr_no_br: 145001.12 sr_no_br_cl: 14500112 sr_cl: MARTOR14500112 sr_dash: sold: 577.2 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 145001.12 SECUMAX 145 safety knife cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX 145 blade is not an open one, but is hidden from people and goods. This provides you with a maximum degree of safety from cut injuries and from damage to goods. 2-in-1 blade head: The blade head provides two functions: cutting and piercing. Use the knife's noses to the left and right of the blade to effortlessly pierce materials (e. g. card and film), and the blade head's corners for packing tape. Concealed blade: With a 4 mm blade access, the blade is highly concealed. Out of reach for fingers but accessible to the materials to be cut. And contents under the cutting surface will also be kept safe from contact with the cutting edge. Flat and robust design: It is not just the handle that has an extremely flat design - the cutting channel only measures 1. 5 mm, requiring less effort for cutting. The tool also retains its strength - thanks to a 0. 5 mm blade and high-quality, recycled plastic. Lightweight and sustainable: The SECUMAX 145 is so lightweight that users will hardly notice it. This is aided by the comfortably rounded 4 mm wide handle. Conserving materials is combined with the use of recycled plastic. This means double the environmental sustainability. Clever guide surfaces: A tip from us on cutting card: hold the blade at an angle to improve cutting! It is no accident that the guide surfaces are located at the front of the knife - they aid cutting at the most effective angle. Compact design. Sustainable performance. The SECUMAX 145 is our clever, compact safety knife for routine cutting tasks. The glass-fibre reinforced plastic handle made from recycled plastic (at least 60%) and 0. 5 mm strong blade gives it remarkable robustness. At just 12 g it is also extremely light. The disposable cutting tool easily copes with single-layer cardboard, film and packing tape, for example. The two cutting edges are safely concealed to protect fingers. Basic material: Recycled plastic| Glass fibre reinforced plastic2-in-1 blade head The blade head provides two functions: cutting and piercing. Use the knife's noses to the left and right of the blade to effortlessly pierce materials (e. g. card and film), and the blade head's corners for packing tape. Concealed blade With a 4 mm blade access, the blade is highly concealed. Out of reach for fingers but accessible to the materials to be cut. And contents under the cutting surface will also be kept safe from contact with the cutting edge. It is not just the handle that has an extremely flat design - the cutting channel only measures 1. 5 mm, requiring less effort for cutting. The tool also retains its strength - thanks to a 0. 5 mm blade and high-quality, recycled plastic. Lightweight and sustainable The SECUMAX 145 is so lightweight that users will hardly notice it. This is aided by the comfortably rounded 4 mm wide handle. Conserving materials is combined with the use of recycled plastic. This means double the environmental sustainability. Clever guide surfaces A tip from us on cutting card: hold the blade at an angle to improve cutting! It is no accident that the guide surfaces are located at the front of the knife - they aid cutting at the most effective angle. Main cutting materials:Cardboard: 1-ply Wrapping, stretch and shrink foil Tape Bagged goods Layers of foil or paper Yarn, cord ds: dsc: kts: SECUMAX 145 safety knife kpn: 145001.12 kpn_dash: kpn_clear: 14500112 bkpn: MARTOR 145001.12 bkpn_clear: MARTOR 14500112 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 14500112 sr_ns: MARTOR145001.12
r: 03093621 p: 14.008 pid: 172962 b: MARTOR q: 514 st: 1 lt: 1 ean: 4002632801792 sr: MARTOR 54001410.02 sr_no_br: 54001410.02 sr_no_br_cl: 5400141002 sr_cl: MARTOR5400141002 sr_dash: sold: 504.288 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 54001410.02 SECUNORM 540 safety knife with styrofoam blade 17940 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM 540 guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. Robust handle: The aluminium handle is already familiar from the SECUNORM PROFI40. The handle and a newly developed plastic insert form a perfect team to ensure that your SECUNORM 540 is equipped to meet even the toughest tasks. Optimised slider: A firm hold and grip are typical MARTOR characteristics. The SECUNORM 540 is no different. Its slider has a grooved structure and is especially large, giving the ideal conditions for comfortable, "hands-on" work - even when wearing gloves. Safe blade change: The blade change button gives easy access to the blade, which is also held in place by a magnet. A further practical feature is that the blade cover can be lifted and locked in an open position. Very large cutting depth: The extra-large cutting depth is ideal for thick materials such as foam and polystyrene, but also for tasks such as cutting paper rolls. The quality blade has an extremely low risk of breakage. Secure hold: For secure fastening, the SECUNORM 540 is equipped with a practical lanyard hole, another reason why it could become a constant companion. You then reduce risks two-fold: the risk of loss and the risk of cutting injuries. Highly specialised - for many applications. With stainless steel blade. With its cutting depth of up to 36 mm, the SECUNORM 540 is in a field of its own. The MARTOR safety knife demonstrates its impressive strengths especially when cutting foam, polystyrene, paper rolls and bagged goods. For all its specialism, its robust and ergonomic aluminium handle is easy to hold and suitable for either hand. The proven automatic blade retraction protects you from cutting injuries. Basic material: Aluminium Robust handle The aluminium handle is already familiar from the SECUNORM PROFI40. The handle and a newly developed plastic insert form a perfect team to ensure that your SECUNORM 540 is equipped to meet even the toughest tasks. Optimised slider A firm hold and grip are typical MARTOR characteristics. The SECUNORM 540 is no different. Its slider has a grooved structure and is especially large, giving the ideal conditions for comfortable, "hands-on" work - even when wearing gloves. The blade change button gives easy access to the blade, which is also held in place by a magnet. A further practical feature is that the blade cover can be lifted and locked in an open position. Very large cutting depth The extra-large cutting depth is ideal for thick materials such as foam and polystyrene, but also for tasks such as cutting paper rolls. The quality blade has an extremely low risk of breakage. Secure hold For secure fastening, the SECUNORM 540 is equipped with a practical lanyard hole, another reason why it could become a constant companion. You then reduce risks two-fold: the risk of loss and the risk of cutting injuries. Main cutting materials:Bagged goods Wrapping, stretch and shrink foil Cardboard: up to 3-ply Foam, polystyrene ds: dsc: kts: SECUNORM 540 safety knife with styrofoam blade 17940 kpn: 54001410.02 kpn_dash: kpn_clear: 5400141002 bkpn: MARTOR 54001410.02 bkpn_clear: MARTOR 5400141002 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 5400141002 sr_ns: MARTOR54001410.02
r: 08100199 p: 20.495 pid: 172992 b: MARTOR q: 0 st: lt: 10 ean: 4002632803550 sr: MARTOR 436.02 sr_no_br: 436.02 sr_no_br_cl: 43602 sr_cl: MARTOR43602 sr_dash: sold: 409.9 p_range: none type: standard act: 1 avo: 1 av: n: MARTOR 436.02 SECUMAX OPTICUT safety knife with industrial blade 37040 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX OPTICUT blade is not an open one, but is hidden from people and goods. This provides you with the highest degree of safety from cut injuries and from damage to goods. Work ergonomically: It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable. Cut clean: Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade. Extremely robust: The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time. Easy blade change: Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place. 4-cutting edge blade: Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company! Glides over the material. And right through the middle. For "pull" cutting. You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "pull" cutting. Basic material: Plastic Work ergonomically It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable. Cut clean Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade. The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time. Easy blade change Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place. 4-cutting edge blade Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!Main cutting materials:Layers of foil or paper Plastic strapping band Cardboard: 1-ply Wrapping, stretch and shrink foil ds: dsc: kts: SECUMAX OPTICUT safety knife with industrial blade 37040 kpn: 436.02 kpn_dash: kpn_clear: 43602 bkpn: MARTOR 436.02 bkpn_clear: MARTOR 43602 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 43602 sr_ns: MARTOR436.02
r: 41271412 p: 6.72 pid: 173022 b: MARTOR q: 30 st: 1 lt: 1 ean: 4002632913259 sr: MARTOR 96.60 sr_no_br: 96.60 sr_no_br_cl: 9660 sr_cl: MARTOR9660 sr_dash: sold: 349.44 p_range: none type: standard act: 1 avo: 1 av: Width 100 mm Quantity per box 10 n: MARTOR 96.60 spare blades scraper blade 96 standard cutter (10 pcs) cn: REPLACEMENT BLADE FOR SCRAPER cn2: REPLACEMENT BLADE FOR SCRAPER cn_clear: REPLACEMENTBLADEFORSCRAPER d: Product description SCRAPER BLADE NO. 96 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 99. 5 mm long, 14 mm wide and 0. 40 mm thick.SCRAPER BLADE NO. 96 is available under order number 96. 60 in a transparent pack of 10. The blade can be used in the following MARTOR knives: SCRAPEX 5196, SCRAPEX 596. Ground: Standard ground Blade facets: Double bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Steel ds: dsc: kts: spare blades scraper blade 96 standard cutter (10 pcs) kpn: 96.60 kpn_dash: kpn_clear: 9660 bkpn: MARTOR 96.60 bkpn_clear: MARTOR 9660 c_path: Home / Tools / Hand tools / Files, graters and scrapers / Accessories and spare parts / Replacement blade for scraper | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor files, graters and scrapers / Martor accessories and spare parts / Martor replacement blade for scraper sr_no_br_cl_ns: 9660 sr_ns: MARTOR96.60
r: 41271381 p: 4.55 pid: 173039 b: MARTOR q: 325 st: 1 lt: 1 ean: 4002632914836 sr: MARTOR 99.70 sr_no_br: 99.70 sr_no_br_cl: 9970 sr_cl: MARTOR9970 sr_dash: sold: 282.1 p_range: none type: standard act: 1 avo: 1 av: Length 60 mm Number per box 10 n: MARTOR 99.70 spare trapezium blade 99 wide blade (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description TRAPEZOID BLADE NO. 99 from MARTOR is a high-quality blade made of steel. It is very sharp and has two cutting edges that can be used one after the other for a long service life. The wide ground edge makes cutting easier. The blade is 60. 0 mm long, 19 mm wide and 0. 63 mm thick.TRAPEZOID BLADE NO. 99 is available under order number 99. 70 in a dispenser of 10. The blade can be used in the following MARTOR knives: SECUPRO 625, SECUPRO MEGASAFE, SECUPRO MAXISAFE, SECUNORM 525. Ground: deep-edged Blade facets: Double bevel edge-ground Blade characteristics: 2-cutting edge blade Basic material: Steel ds: dsc: kts: spare trapezium blade 99 wide blade (10 pcs) kpn: 99.70 kpn_dash: kpn_clear: 9970 bkpn: MARTOR 99.70 bkpn_clear: MARTOR 9970 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 9970 sr_ns: MARTOR99.70
r: 41271358 p: 6.87 pid: 173048 b: MARTOR q: 126 st: 1 lt: 1 ean: 4002632906183 sr: MARTOR 46144.02 sr_no_br: 46144.02 sr_no_br_cl: 4614402 sr_cl: MARTOR4614402 sr_dash: sold: 274.8 p_range: none type: standard act: 1 avo: 1 av: Width 39 mm Scraper type Straight scraper n: MARTOR 46144.02 SCRAPEX ARGENTAX scraper with bow blade 44 cn: SCRAPER cn2: SCRAPER cn_clear: SCRAPER d: Product description Especially ergonomic: Ergonomics is not the exception with us, but the rule. Even a scraper like the SCRAPEX ARGENTAX waits for you with a rounded handle, which you would gladly also hold for longer in you hand. Large blade extension: There is comparatively a lot of blade available for a scraper. The advantage: You can reach between the surface and remains of the glue much more easily and can then remove it much more easily too. Flexible to use: The SCRAPEX ARGENTAX is very suitable for flat scraping angles. So you can depend on your scraper even in difficult situations. For right and left: The SCRAPEX ARGENTAX fits into every hand. No matter whether it's your right or your left hand. Because the handle has been shaped in such a balanced way, that no type of handling is preferred or neglected. Easy blade changing: And that completely without a tool: you just have to push the blade to the side and take it out. Top forming, top form. It really feels good, the large, rounded handle of the SCRAPEX ARGENTAX. But even the performance of this classic scraper convinces. So you can free all smooth surfaces from residue and remains with it - no matter whether at work or at home. When you're done, push the protective cap over the blade, and everything is safe. Basic material: Plastic Especially ergonomic Ergonomics is not the exception with us, but the rule. Even a scraper like the SCRAPEX ARGENTAX waits for you with a rounded handle, which you would gladly also hold for longer in you hand. Large blade extension There is comparatively a lot of blade available for a scraper. The advantage: You can reach between the surface and remains of the glue much more easily and can then remove it much more easily too. The SCRAPEX ARGENTAX is very suitable for flat scraping angles. So you can depend on your scraper even in difficult situations. For right and left The SCRAPEX ARGENTAX fits into every hand. No matter whether it's your right or your left hand. Because the handle has been shaped in such a balanced way, that no type of handling is preferred or neglected. Easy blade changing And that completely without a tool: you just have to push the blade to the side and take it out. ds: dsc: kts: SCRAPEX ARGENTAX scraper with bow blade 44 kpn: 46144.02 kpn_dash: kpn_clear: 4614402 bkpn: MARTOR 46144.02 bkpn_clear: MARTOR 4614402 c_path: Home / Tools / Hand tools / Files, graters and scrapers / Scrapers / Scraper | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor files, graters and scrapers / Martor scrapers / Martor scraper sr_no_br_cl_ns: 4614402 sr_ns: MARTOR46144.02
r: 02680028 p: 2.32 pid: 172926 b: MARTOR q: 0 st: lt: 7 ean: 4002632916564 sr: MARTOR 110000.08 sr_no_br: 110000.08 sr_no_br_cl: 11000008 sr_cl: MARTOR11000008 sr_dash: sold: 232 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 110000.08 SECUNORM SMARTCUT safety knife cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM SMARTCUT guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. One use, two advantages: The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process. Slider on both sides: With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself! Light and easy: At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired. Perfect handling: The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there's much more: So that your thumb doesn't slip, the slider has grooves. You can't lose it: As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station. Yes, a cutting tool can be this SMART. Make one cut with this safety knife and you'll know immediately why it's called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting material is SMART. Automatic blade retraction in such a small housing is SMART. Its immense popularity as an attractive promotional knife definitely proves its SMARTness. Basic material: Plastic One use, two advantages The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process. Slider on both sides With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself!At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired. Perfect handling The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there's much more: So that your thumb doesn't slip, the slider has grooves. You can't lose it As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station. Main cutting materials:Wrapping, stretch and shrink foil Tape Cardboard: up to 2-ply Layers of foil or paper ds: dsc: kts: SECUNORM SMARTCUT safety knife kpn: 110000.08 kpn_dash: kpn_clear: 11000008 bkpn: MARTOR 110000.08 bkpn_clear: MARTOR 11000008 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 11000008 sr_ns: MARTOR110000.08
r: 02265397 p: 8.43 pid: 172910 b: MARTOR q: 14 st: 1 lt: 1 ean: 4002632919220 sr: MARTOR 17940.60 sr_no_br: 17940.60 sr_no_br_cl: 1794060 sr_cl: MARTOR1794060 sr_dash: sold: 202.32 p_range: none type: standard act: 1 avo: 1 av: Quantiy per pack 10 n: MARTOR 17940.60 spare styrofoam blade 17940 (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description STYROPOR BLADE NO. 17940 from MARTOR is a high-quality blade made of stainless steel. It is very sharp and has one usable cutting edge. The blade is 71. 2 mm long, 17. 7 mm wide and 0. 50 mm thick. The oil used for the blade is food safe.STYROPOR BLADE NO. 17940 is available under order number 17940. 60 in a transparent pack of 10. The blade can be used in the following MARTOR knives: SECUNORM 380, SECUNORM 540, SECUBASE 383. Blade facets: Double bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Stainless steel ds: dsc: kts: spare styrofoam blade 17940 (10 pcs) kpn: 17940.60 kpn_dash: kpn_clear: 1794060 bkpn: MARTOR 17940.60 bkpn_clear: MARTOR 1794060 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 1794060 sr_ns: MARTOR17940.60
r: 02757202 p: 10.79 pid: 172948 b: MARTOR q: 11 st: 1 lt: 1 ean: 4002632920905 sr: MARTOR 8152.02 sr_no_br: 8152.02 sr_no_br_cl: 815202 sr_cl: MARTOR815202 sr_dash: sold: 161.85 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 8152.02 SECUNORM MULTISAFE safety knife with trapezoid blade 5232 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM MULTISAFE guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. Robust design: As you can see and feel, the SECUNORM MULTISAFE is extremely stable. And flexible, since you can use a large number of blade shapes. The safety knife is therefore suitable for many cutting applications. Made of solid metal: The SECUNORM MULTISAFE is a tool that seems to be made of one casting. Zinc die casting, to be precise. For certain industries the safety knife is also available unpainted. Slider on top: With the right or with the left hand, you ask? Left and right, is the answer! The metal slider is on top of the handle. And can thus be easily used with either thumb. 2-cutting edge blade: Before you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade - and reduces your energy consumption. Because your SECUNORM MULTISAFE will cut again like new. Eyelet for fastening: Ever since its introduction the SECUNORM MULTISAFE is equipped with an eyelet for tethering your knife to you or a work station. Simply Heavy Metal. With trapezoid blade. The SECUNORM MULTISAFE is a real classic. It provides excellent durability thanks to its handle made of zinc and its uncomplicated, robust design. With its notable blade extension, you can cut all standard materials. Should you have any particular requirements, you can re-fit the SECUNORM MULTISAFE with one of our many optional blades. Basic material: Zinc Robust design As you can see and feel, the SECUNORM MULTISAFE is extremely stable. And flexible, since you can use a large number of blade shapes. The safety knife is therefore suitable for many cutting applications. Made of solid metal The SECUNORM MULTISAFE is a tool that seems to be made of one casting. Zinc die casting, to be precise. For certain industries the safety knife is also available unpainted. With the right or with the left hand, you ask? Left and right, is the answer! The metal slider is on top of the handle. And can thus be easily used with either thumb. 2-cutting edge blade Before you have to change the quality blade, you can turn it over once. This doubles the usage time of the blade - and reduces your energy consumption. Because your SECUNORM MULTISAFE will cut again like new. Eyelet for fastening Ever since its introduction the SECUNORM MULTISAFE is equipped with an eyelet for tethering your knife to you or a work station. Main cutting materials:Cardboard: up to 3-ply Tape Plastic strapping band Slabbing material off a roll Textile, material Rubber ds: dsc: kts: SECUNORM MULTISAFE safety knife with trapezoid blade 5232 kpn: 8152.02 kpn_dash: kpn_clear: 815202 bkpn: MARTOR 8152.02 bkpn_clear: MARTOR 815202 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 815202 sr_ns: MARTOR8152.02
r: 02391346 p: 2.7 pid: 172911 b: MARTOR q: 1551 st: 1 lt: 1 ean: 4002632972133 sr: MARTOR 150001.12 sr_no_br: 150001.12 sr_no_br_cl: 15000112 sr_cl: MARTOR15000112 sr_dash: sold: 156.6 p_range: none type: standard act: 1 avo: 1 av: n: MARTOR 150001.12 SECUMAX 150 safety knife cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX 150 blade is not an open one, but is hidden from people and goods. This provides you with a maximum degree of safety from cut injuries and from damage to goods. 3-in-1 blade head: The SECUMAX 150 fits like a glove. It's so comfortable to hold, that it feels like an extension of your hand. With it you can cut cardboard, split tape, open plastic strapping... you can even scrape residue off surfaces. Concealed blade: This safety knife doesn't need a sharp tip to be a smart knife. The cutting head is flat and relatively small, the two noses on each side have the perfect length to protect, and both cutting edges are wide enough to safely and effortlessly cut 2-ply cardboard. Clever guide surfaces: Another reason why the SECUMAX 150 can cut through cardboard so easily? The guide surfaces located right at the front of the safety knife help you to cut at an angle. Angled cutting means less material resistance! Ergonomically shaped: Right handed? Left handed? It's really all the same. The SECUMAX 150 fits perfectly in any hand. Gently arched outer edges, coupled with light ribbing and a low weight, ensure an ergonomic experience. Disposable and also sustainable : The SECUMAX 150 is a disposable knife. The blade head is non-replaceable. It was therefore especially important to us to make the product as sustainable as possible. The result: 80% recycled plastic with fibreglass reinforcement. Flexible and sustainable at work. MARTOR's SECUMAX 150 provides you with one tool for three tasks: cutting, scraping and splitting. The two cutting edges are concealed to provide optimum protection for users and packaged goods. The blade head of this 26 g safety knife is firmly attached to the ergonomic handle and cannot be changed. The fibreglass reinforced SECUMAX 150 comprises at least 80% recycled plastic. Basic material: Recycled plastic| Glass fibre reinforced plastic3-in-1 blade head The SECUMAX 150 fits like a glove. It's so comfortable to hold, that it feels like an extension of your hand. With it you can cut cardboard, split tape, open plastic strapping... you can even scrape residue off surfaces. Concealed blade This safety knife doesn't need a sharp tip to be a smart knife. The cutting head is flat and relatively small, the two noses on each side have the perfect length to protect, and both cutting edges are wide enough to safely and effortlessly cut 2-ply cardboard. Another reason why the SECUMAX 150 can cut through cardboard so easily? The guide surfaces located right at the front of the safety knife help you to cut at an angle. Angled cutting means less material resistance!Ergonomically shaped Right handed? Left handed? It's really all the same. The SECUMAX 150 fits perfectly in any hand. Gently arched outer edges, coupled with light ribbing and a low weight, ensure an ergonomic experience. Disposable and also sustainable The SECUMAX 150 is a disposable knife. The blade head is non-replaceable. It was therefore especially important to us to make the product as sustainable as possible. The result: 80% recycled plastic with fibreglass reinforcement. Main cutting materials:Wrapping, stretch and shrink foil Cardboard: up to 2-ply Tape Bagged goods Layers of foil or paper ds: dsc: kts: SECUMAX 150 safety knife kpn: 150001.12 kpn_dash: kpn_clear: 15000112 bkpn: MARTOR 150001.12 bkpn_clear: MARTOR 15000112 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 15000112 sr_ns: MARTOR150001.12
r: 02943606 p: 11.6 pid: 172953 b: MARTOR q: 48 st: 1 lt: 1 ean: 4002632800825 sr: MARTOR 50000210.02 sr_no_br: 50000210.02 sr_no_br_cl: 5000021002 sr_cl: MARTOR5000021002 sr_dash: sold: 127.6 p_range: none type: standard act: 1 avo: 1 av: n: MARTOR 50000210.02 SECUNORM 500 safety knife with trapezoid blade 65232 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Automatic blade retraction - a high degree of safety The automatic blade retraction of the SECUNORM 500 guarantees a high degree of safety from cut injuries. As soon as you have started to cut, take your thumb off the slider. Then the blade will retract into the handle immediately after leaving the material being cut. To protect your products: With the shortened blade, you avoid contact with your products. This means you can work without having to constantly check the cutting depth. The handle narrows at the tip so that the cutting point is always in view. Ergonomic handle: The excellent ergonomics can be felt all over the SECUNORM 500, for example in the newly shaped handle which fits comfortably into the hand. Or in details such as the nicely rounded knife end or the non-slip soft grip on the slider. Abrasion resistant: The robust aluminium handle is designed for the most demanding and frequent cutting tasks. Like its popular predecessor, it is a tough all-rounder capable of taking on any cutting challenge. Double-sided slider: With the predecessor, the SECUNORM PROFI, there were both left and right handed models. With the modern successor, anyone can cut effectively - with the ability to change hands when the task requires it. Tool-less blade change: Blade changing without tools. The SECUNORM 500 comes with an intuitively operated blade change button. Press once to remove the blade carrier with its securely held blade. The safety knife. With rounded-tip trapezoid blade and 9 mm cutting depth. Over 40 years ago the SECUNORM PROFI set standards in safety, robustness and ergonomics. Its successor goes several steps further. For example, the new aluminium handle significantly improves handling and makes cutting easier, the new slider can be operated from both sides and the blade change has been made so much simpler. Apart from these improvements, the proven automatic blade retraction will continue to protect you from cutting injuries. Basic material: Aluminium To protect your products With the shortened blade, you avoid contact with your products. This means you can work without having to constantly check the cutting depth. The handle narrows at the tip so that the cutting point is always in view. Ergonomic handle The excellent ergonomics can be felt all over the SECUNORM 500, for example in the newly shaped handle which fits comfortably into the hand. Or in details such as the nicely rounded knife end or the non-slip soft grip on the slider. The robust aluminium handle is designed for the most demanding and frequent cutting tasks. Like its popular predecessor, it is a tough all-rounder capable of taking on any cutting challenge. Double-sided slider With the predecessor, the SECUNORM PROFI, there were both left and right handed models. With the modern successor, anyone can cut effectively - with the ability to change hands when the task requires it. Tool-less blade change Blade changing without tools. The SECUNORM 500 comes with an intuitively operated blade change button. Press once to remove the blade carrier with its securely held blade. ds: dsc: kts: SECUNORM 500 safety knife with trapezoid blade 65232 kpn: 50000210.02 kpn_dash: kpn_clear: 5000021002 bkpn: MARTOR 50000210.02 bkpn_clear: MARTOR 5000021002 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 5000021002 sr_ns: MARTOR50000210.02
r: 41271465 p: 6.11 pid: 173028 b: MARTOR q: 0 st: lt: 8 ean: 4002632909467 sr: MARTOR 677.50 sr_no_br: 677.50 sr_no_br_cl: 67750 sr_cl: MARTOR67750 sr_dash: sold: 122.2 p_range: none type: standard act: 1 avo: 1 av: Length 37 mm Quantity per box 10 n: MARTOR 677.50 spare blades graphic blade 677 special sharpening (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description GRAPHIC BLADE NO. 677 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 37 mm long, 6. 1 mm wide and 0. 50 mm thick.GRAPHIC BLADE NO. 677 is available under order number 677. 50 in a magazine of 10. The blade can be used in the following MARTOR knives: GRAFIX 501, TRIMMEX CUTTOGRAF. Ground: Special grinding Blade facets: Double bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Steel ds: dsc: kts: spare blades graphic blade 677 special sharpening (10 pcs) kpn: 677.50 kpn_dash: kpn_clear: 67750 bkpn: MARTOR 677.50 bkpn_clear: MARTOR 67750 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 67750 sr_ns: MARTOR677.50
r: 02363987 p: 10.13 pid: 172899 b: MARTOR q: 553 st: 1 lt: 1 ean: 4002632920820 sr: MARTOR 350001.02 sr_no_br: 350001.02 sr_no_br_cl: 35000102 sr_cl: MARTOR35000102 sr_dash: sold: 111.43 p_range: none type: standard act: 1 avo: 1 av: Detection None n: MARTOR 350001.02 SECUMAX 350 safety knife with SECUMAX blade 3550 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX 350 blade is not an open one, but is hidden from people and goods. This provides you with a maximum degree of safety from cut injuries and from damage to goods. 2-in-1 blade head: Double function, double use: with two cutting edges and two tape splitters, this multifunctional blade head exceeds itself. Before you need to change the blade, flip it over once to use the second side. Concealed blade: The blade head's two cutting edges are safely concealed to protect users and goods and are yet capable of safely cutting 2-ply cardboard boxes and much more. Spare blade in storage: Blade change is easily and safely executed. Look for the arrow and follow its lead. Open the blue inner side of the knife to reveal the spare blade. The mounted blade will simultaneously unlatch. Light and easy: A cutting heavyweight, but with only 38 grams, this knife is rather lightweight. Meaning that even high cutting frequencies won't weigh you down. There's no need to stress when handling the blade either: a plastic jacket protects your fingers. Ergonomically shaped: Right handed or left handed? It's really all the same. The SECUMAX 350 fits perfectly in any hand. Gently arched outer edges, coupled with suitably located soft grip and light ribbing make for an ergonomic experience. More fun while you work? Try it out. The SECUMAX 350 is a combination of versatility, comfort and safety. A maximum degree of safety. Featuring an innovative blade change, this knife is multi-talented. It can be used to cut all standard materials, from film to plastic-strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won't want to put it down. Basic material: Glass fibre reinforced plastic2-in-1 blade head Double function, double use: with two cutting edges and two tape splitters, this multifunctional blade head exceeds itself. Before you need to change the blade, flip it over once to use the second side. Concealed blade The blade head's two cutting edges are safely concealed to protect users and goods and are yet capable of safely cutting 2-ply cardboard boxes and much more. Blade change is easily and safely executed. Look for the arrow and follow its lead. Open the blue inner side of the knife to reveal the spare blade. The mounted blade will simultaneously unlatch. Light and easy A cutting heavyweight, but with only 38 grams, this knife is rather lightweight. Meaning that even high cutting frequencies won't weigh you down. There's no need to stress when handling the blade either: a plastic jacket protects your fingers. Ergonomically shaped Right handed or left handed? It's really all the same. The SECUMAX 350 fits perfectly in any hand. Gently arched outer edges, coupled with suitably located soft grip and light ribbing make for an ergonomic experience. Main cutting materials:Cardboard: up to 2-ply Wrapping, stretch and shrink foil Plastic strapping band Tape ds: dsc: kts: SECUMAX 350 safety knife with SECUMAX blade 3550 kpn: 350001.02 kpn_dash: kpn_clear: 35000102 bkpn: MARTOR 350001.02 bkpn_clear: MARTOR 35000102 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 35000102 sr_ns: MARTOR350001.02
r: 08100200 p: 20.826 pid: 172976 b: MARTOR q: 0 st: lt: 6 ean: 4002632803567 sr: MARTOR 437.02 sr_no_br: 437.02 sr_no_br_cl: 43702 sr_cl: MARTOR43702 sr_dash: sold: 104.13 p_range: none type: standard act: 1 avo: 1 av: n: MARTOR 437.02 SECUMAX OPTICUT safety knife with industrial blade 37040 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX OPTICUT blade is not an open one, but is hidden from people and goods. This provides you with the highest degree of safety from cut injuries and from damage to goods. Work ergonomically: It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable. Cut clean: Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade. Extremely robust: The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time. Easy blade change: Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place. 4-cutting edge blade: Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company! Glides over the material. And right through the middle. For "push" cutting. You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "push" cutting. Basic material: Plastic Work ergonomically It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable. Cut clean Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade. The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time. Easy blade change Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place. 4-cutting edge blade Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!Main cutting materials:Layers of foil or paper Plastic strapping band Cardboard: 1-ply Wrapping, stretch and shrink foil ds: dsc: kts: SECUMAX OPTICUT safety knife with industrial blade 37040 kpn: 437.02 kpn_dash: kpn_clear: 43702 bkpn: MARTOR 437.02 bkpn_clear: MARTOR 43702 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 43702 sr_ns: MARTOR437.02
r: 02030763 p: 32.561 pid: 172903 b: MARTOR q: 0 st: lt: 8 ean: 4002632919633 sr: MARTOR 104.60 sr_no_br: 104.60 sr_no_br_cl: 10460 sr_cl: MARTOR10460 sr_dash: sold: 97.683 p_range: none type: standard act: 1 avo: 1 av: Length 93 mm Quantiy per pack 10 n: MARTOR 104.60 spare blades special blade large model 104 special sharpening (10 pcs) cn: REPLACEMENT BLADE cn2: REPLACEMENT BLADE cn_clear: REPLACEMENTBLADE d: Product description LARGE SPECIAL PURPOSE BLADE NO. 104 from MARTOR is a high-quality blade made of steel. It is very sharp and has one usable cutting edge. The blade is 93 mm long, 33 mm wide and 0. 80 mm thick.LARGE SPECIAL PURPOSE BLADE No. 104 is available under order number 104. 60 in a transparent pack of 10. Ground: Special grinding Blade facets: Single bevel edge-ground Blade characteristics: 1-cutting edge blade Basic material: Steel ds: dsc: kts: spare blades special blade large model 104 special sharpening (10 pcs) kpn: 104.60 kpn_dash: kpn_clear: 10460 bkpn: MARTOR 104.60 bkpn_clear: MARTOR 10460 c_path: Home / Tools / Hand tools / Cutting and bending tools / Accessories and spare parts / Replacement blade | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor accessories and spare parts / Martor replacement blade sr_no_br_cl_ns: 10460 sr_ns: MARTOR104.60
r: 03295359 p: 9.75 pid: 172974 b: MARTOR q: 122 st: 1 lt: 1 ean: 4002632803413 sr: MARTOR 350040.02 sr_no_br: 350040.02 sr_no_br_cl: 35004002 sr_cl: MARTOR35004002 sr_dash: sold: 97.5 p_range: none type: standard act: 1 avo: 1 av: Blade with 25,85 mm Auto-retractable No Detection None Blade length 38,9 mm n: MARTOR 350040.02 SECUMAX 350 SE safety knife with SECUMAX blade 355020 cn: SAFETY KNIFE cn2: SAFETY KNIFE cn_clear: SAFETYKNIFE d: Product description Concealed blade - a maximum degree of safety The SECUMAX 350 SE blade is not an open one, but is hidden from people and goods. This provides you with a maximum degree of safety from cut injuries and from damage to goods. 2-in-1 blade head: Double function, double use: with two cutting edges and two tape splitters, this multifunctional blade head exceeds itself. Before you need to change the blade, flip it over once to use the second side. Concealed blade: The blade head's two cutting edges are safely concealed to protect users and goods and are yet capable of safely cutting 2-ply cardboard boxes and much more. Spare blade in storage: Blade change is easily and safely executed. Look for the arrow and follow its lead. Open the blue inner side of the knife to reveal the spare blade. The mounted blade will simultaneously unlatch. Ergonomically shaped: Right or left hander? It doesn't matter. The SECUMAX 350 SE safety knife sits comfortably in every hand. Curved outer sides and grooves on the handle contribute to it's ease of use. Sustainably designed: MARTOR prioritises sustainability. SECUMAX 350 SE's handle is made of a high-quality recycled plastic. To enable future recycling, it does not use soft-grip components. More sustainability for cutting tasks? Try it yourself. The SECUMAX 350 SE is our sustainable all-rounder. The black handle is made of 98% recycled plastic. The interchangeable 2-in1 blade head also gives the knife an extended service life. It cuts all common materials from film and plastic strapping band through to 2-ply cardboard. The concealed blade protects users as well as packaged goods. It can also easily split adhesive tape. Basic material: Recycled plastic2-in-1 blade head Double function, double use: with two cutting edges and two tape splitters, this multifunctional blade head exceeds itself. Before you need to change the blade, flip it over once to use the second side. Concealed blade The blade head's two cutting edges are safely concealed to protect users and goods and are yet capable of safely cutting 2-ply cardboard boxes and much more. Blade change is easily and safely executed. Look for the arrow and follow its lead. Open the blue inner side of the knife to reveal the spare blade. The mounted blade will simultaneously unlatch. Ergonomically shaped Right or left hander? It doesn't matter. The SECUMAX 350 SE safety knife sits comfortably in every hand. Curved outer sides and grooves on the handle contribute to it's ease of use. Sustainably designed MARTOR prioritises sustainability. SECUMAX 350 SE's handle is made of a high-quality recycled plastic. To enable future recycling, it does not use soft-grip components. Main cutting materials:Cardboard: up to 2-ply Wrapping, stretch and shrink foil Plastic strapping band Tape ds: dsc: kts: SECUMAX 350 SE safety knife with SECUMAX blade 355020 kpn: 350040.02 kpn_dash: kpn_clear: 35004002 bkpn: MARTOR 350040.02 bkpn_clear: MARTOR 35004002 c_path: Home / Tools / Hand tools / Cutting and bending tools / Knives / Safety knife | Home / Our brands / Martor / Martor tools / Martor hand tools / Martor cutting and bending tools / Martor knives / Martor safety knife | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Safety knife sr_no_br_cl_ns: 35004002 sr_ns: MARTOR350040.02
