makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj
makita_dst112zj

MAKITA DST112ZJ 18V LXT cordless stapler 10mm in MAKPAC (without battery and charger)

Supplier number: MAKITA DST112ZJ | EAN 0088381817851
Recommended Retail Price €362.24
289.88 tax incl.
€239.57 excl. VAT (incl. all environmental contributions)
On order: delivered from 24/11/2026

Rapid and precise stapling with Makita

Practical benefits
  • High capacity magazine design: Holding up to 150 staples, this tool lets you install foil, fabric, and vapor barriers without constant reloading stops.
  • Dual actuation firing modes: Switch effortlessly between contact bump firing for large coverage runs and single sequential actuation for exact staple placement.
  • Organized Makpac II storage: Thanks to the supplied Makpac II case, this lightweight 18V tool stays protected and ready between job sites.

In a nutshell

The right choise for

The Makita DST112ZJ cordless stapler streamlines securing vapor barriers, insulation foil, and upholstery to timber frames. Driven by 18V battery power, it eliminates the muscle strain of manual tackers while freeing you from cumbersome air hoses and compressors.

The magazine holds up to 150 staples with a 10 mm crown width and lengths from 7 to 10 mm. Depending on the task, you can switch seamlessly between contact bump firing for swift coverage and single sequential actuation for pinpoint accuracy.

Weighing only 1.2 kg, this tool handles easily on ladders, scaffolding, and in tight spaces. It arrives ready for transit in a durable Makpac II system case alongside a handy belt hook.



€289.88
tax incl.

Product information

Key features according to our expert

  • Battery voltage: 18 V
  • With gas cartridge: No
  • Number of batteries supplied: 0
  • UN number: Not applicable
  • Weight: 1,2 kg
  • Type of system case: Makpac II
  • Supplied in: System case
  • Magzine capacity: 150 ea
  • With nail function: No
  • Max. back width (staple): 10 mm
  • Min. back width (staple): 10 mm
  • Max. staple length: 10 mm
  • Min. staple length: 7 mm
  • Product Range: Makita LXT 18V

Scope of delivery

  • 1 x 346317-0 Belt hook
  • 1 x 821550-0 Makpac case II

Product description

For easy fixing of materials

A handy 18 V LXT® cordless stapler for fast and easy fixing of construction plastic and other materials. Suitable for mounting upholstery, roofing sheets, vapour-proof layers, underlayments and other building materials.

  • The contact operation mode moves the staples repetitively for fast operation
  • The rubber coating on the handle ensures a firm grip
  • The safety switch prevents the tool from being started accidentally
  • Battery protection system automatically switches off power when battery level is low

All Features

Battery voltage
18 V
With gas cartridge
No
Number of batteries supplied
0
Un number
Not applicable
Weight
1,2 kg
Type of system case
Makpac II
Supplied in
System case
Magzine capacity
150 ea
With nail function
No
Max. back width (staple)
10 mm
Min. back width (staple)
10 mm
Max. staple length
10 mm
Min. staple length
7 mm
Nominal battery voltage
18 V
Product range
Makita LXT 18V
Weight with battery
1.5 - 1.8 kg
Noise uncertainty (k-factor)
3 dB(A)
Capacity of fastener magazine
150
Net product weight
1.5 kg
Lxt voltage
1
Width of not
10 mm
Stapling dimensions
10 x 7 - 10 mm
Vibration uncertainty (k-factor)
1.5 m/s²
Dimensions (l x w x h)
235 x 94 x 165 mm
Length not
7 - 10 mm
Cross section not
0.5 x 0.7 mm

Accessories

Frequently asked questions about this product

Answered by specialists
Which staples fit in this cordless stapler?
The tool fires staples with a 10 mm crown width and a length between 7 and 10 mm.
Are a battery and charger included?
No, this is a bare unit supplied in a Makpac II case without a battery or charger.
Which batteries are compatible with this tool?
All Makita 18V lxt lithium-ion batteries are compatible.
What is the magazine capacity?
The magazine holds up to 150 staples.
Does this tool drive nails?
No, this model does not have a brad or nail function and works exclusively with staples.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.