makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk
makita_dsc121zk

MAKITA DSC121ZK 18V LXT cordless rod cutter M8-M12 in MAKPAC (without battery and charger)

MAKITA
Supplier number: MAKITA DSC121ZK | EAN 0088381871075
Recommended Retail Price €2,153.04
1,834.48 tax incl.
€1,516.10 excl. VAT (incl. all environmental contributions)
On order: delivered from 21/10/2026

✆ Talk to a specialist

Clean cutting with Makita rod cutter

Practical benefits
  • Burr free clean cuts: You cut threaded rods without sparks or burrs, allowing nuts to thread on immediately without deburring.
  • Fast three second cycle: The brushless 18V motor delivers rapid shearing action through threaded rods up to M12 in 3.0 seconds.
  • Manual blade return valve: The integrated release valve allows you to return the cutting jaw to the starting position at any moment.

In a nutshell

The right choise for

With the Makita DSC121ZK, you cut M8 to M12 threaded rods quickly, cleanly, and completely spark-free. Thanks to the powerful brushless 18V motor, it shears through an M12 threaded rod in just 3.0 seconds. Because the cut remains burr-free, nuts thread directly onto the rod without any filing or rework. This makes the tool ideal for installing cable trays, ceiling piping, and ventilation ducts on the jobsite. The integrated manual release valve gives you full control over the cutting jaw position at all times. This bare unit comes in a sturdy makpac case with an M8 blade set, oil, and hex wrenches, without an 18V lxt battery or charger.



Product information Accessories FAQ
€1,834.48
tax incl.

Product information

Key features according to our expert

  • Battery voltage: 18 V
  • UN number: Not applicable
  • Number of batteries included: 0
  • Product Range: Makita LXT 18V

Scope of delivery

  • 1 x 783202-0 Allen key 4 mm
  • 1 x 783204-6 Allen spanner 6 mm
  • 1 x 821552-6 Makpac case IV
  • 1 x SC00000106 Oil
  • 1 x SC09002700 Knife set for steel for threaded end shears M8

Product description

Powerful, spark-free and brushless shears for wire ends and stainless steel

Powerful, fast and noiseless wire end shears with brushless motor. Cuts wire ends neatly and safely without sparks. The created edge is very neat. Can also be used for cutting 8 - 12 mm steel. Up to 500 cuts with one charge (6.0 Ah battery).

  • No dust, no sparks.
  • Battery protection system automatically switches off power when battery level is low

The DSC121 is a wire end shear that offers high cutting power, capacity and speed. All this while cutting neatly and almost without marks. It can cut steel up to 12 mm thick in 3 seconds.The wire end shears are also a safe choice. It produces no sparks when cutting and there is no danger of kickback. It can also be used while resting against the ground for extra balance.It also has a brushless motor that requires less maintenance and offers higher power. With a single fully charged 5.0 Ah battery, the machine can cut 12 mm steel up to 420 times. Now that's efficiency!

All Features

Battery voltage
18 V
Un number
Not applicable
Number of batteries included
0
Nominal battery voltage
18 V
Weight with battery
5.7 - 6.0 kg
Brushless motor
1
Noise uncertainty (k-factor)
3 dB(A)
Lxt voltage
1
Sawing time
3,0 s
Dimensions (l x w x h)
212 x 323 x 260 mm
Vibration uncertainty (k-factor)
1.5 m/s²
Product range
Makita LXT 18V

Accessories

Frequently asked questions about this product

Answered by specialists
Which threaded rod sizes can you cut with this tool?
The tool is designed to cut threaded rods from M8 to M12.
Are a battery and charger included with the DSC121ZK?
No, this tool comes as a bare unit in a MAKPAC case, without an 18V LXT battery or charger.
How fast does it cut through an M12 threaded rod?
The tool completes a cut through an M12 threaded rod in 3.0 seconds.
Do you need to deburr the thread after cutting?
No, it produces clean, spark-free and burr-free cuts so nuts thread on directly.
Which blade set is included in the standard delivery?
A steel cutter blade set for M8 threaded rods is included as standard.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us
0032 3 74 000 41 [email protected]

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.