Strong Loctite bonding for plastics
- Bonds difficult plastic surfaces: With the surface primer, you achieve dependable adhesion on low-energy plastics including polyethylene, polypropylene, and PTFE.
- Rapid fix in seconds: The low-viscosity instant adhesive cures rapidly, so you can assemble parts quickly without extended clamping times.
- Clear UV quality check: The primer fluoresces under ultraviolet light, allowing you to easily verify proper surface coverage before applying adhesive.
With the Loctite polyolefin kit, you reliably bond low surface energy plastics such as polyethylene (PE), polypropylene (PP), and PTFE. Prepare hard-to-bond surfaces first using the Loctite sf 770 primer (10 g), which fluoresces under uv light for easy quality inspection. Then, apply the low-viscosity Loctite 406 instant adhesive (20 g) for rapid fixturing in seconds, eliminating extended clamping times. This practical combination prevents adhesion failure and delivers strong, dependable results across plastic housings, small technical components, and rubber seals or gaskets.
Product description:
- LOCTITE 406/770
Characteristics:
- LOCTITE 406/LOCTITE SF 770 KIT is a kit consisting of two components:on the one hand LOCTITE 406, developed for bonding plastics and elastomers where very fast fixation is required, and on the other hand LOCTITE SF 770, a primer used to make polyolefins and other surfaces with low surface energy, suitable for bonding with Loctite cyanoacrylate adhesives
- Note: Visit the pages for LOCTITE 406 and LOCTITE SF 770 for Technical Information on these products.
