Flawless surface preparation and joint smoothing with Tec7 Prepare & Finish
- Reliable adhesive bonding performance: You degrease and clean substrates thoroughly without staining risks, ensuring optimal adhesion for sealants and adhesives.
- Smooth and sealed joints: You tool joints cleanly while accelerating polymer curing and significantly reducing the risk of sanitary mould growth.
- Safe across every surface: Thanks to the propellant-free and pH-neutral formulation, you work safely on delicate materials without damaging them.
With Tec7 Prepare & Finish, you ensure dependable adhesion and a clean joint finish on every sealing and bonding job. This pH-neutral cleaner thoroughly removes grease, fine dust, and finger marks without staining or damaging sensitive substrates. After applying your sealant, it lets you tool silicone, polymer, and acrylic joints into a smooth, closed finish, supporting faster polymer curing and reducing the risk of sanitary mould growth. The 400 ml bag-on-valve aerosol dispenses without propellants and sprays consistently in any position. Simply allow the surface to evaporate after cleaning to apply adhesive or paint over it without rinsing.
Product description
THE PERFECT PREPARATION AND FINISHING FOR ADHESIVES AND SEALANTS
- Cleaning, degreasing and smoothing
- Professional smoothing of any sealant
- Paintable without rinsing*
- Convenient high-yield packaging (Bag-on-Valve)
- Prepare & Finish is pH neutral, therefore safe on any substrate, compatible with any type of adhesive or sealant and removes fine dust as well as grease and finger marks
- Cleaning and degreasing for perfect bonding without risk of staining
- Smoothing using Prepare & Finish ensures a perfectly smooth and closed joint, accelerates polymer curing and reduces the risk of mould on sanitary joints
- Contains no propellants, biodegradable and non-toxic
- *Paintable without rinsing if substrate permits
Instructions
- Cleaning before gluing and sealing: remove as much loose dirt as possible with a brush or cloth
- Spray the surface
- In the case of gluing, treat both surfaces
- Leave for 30 to 60 seconds
- Wipe away loose dirt with a clean microfibre cloth
- Allow to evaporate for a few minutes before applying adhesive or sealant
- Smoothing off joints: Moisten spatula, masking tool or finger with Prepare & Finish
- Smooth over the joint and remove excess sealant
