Product Description:
- International Tools ECO HSS DIN 352 Metric Coarse set of 3 pieces
- DIN 352, 60°, short series
Supplier number:
INTERNATIONAL TOOLS 211401400
|
EAN
8716563334453
62.44
tax incl.
€51.60 excl. VAT (incl. all environmental contributions)
Precise cutting for metric threads
Practical benefits- Complete three-piece tap set: You cut clean M14 threads progressively and safely with the taper, intermediate, and plug taps.
- Resilient high-speed steel: The hardened HSS construction retains edge sharpness over repeated threading operations with a 2 mm pitch.
- Standardized DIN 352 design: You achieve tight tolerances and consistent results when tapping through or blind holes manually.
In a nutshell
The right choise forWith the International Tools eco hss hand tap set din 352, you can manually cut clean metric M14 internal threads with a 2 MM pitch. This 3-piece set includes a taper, intermediate, and finishing tap to distribute cutting resistance evenly and prevent tool breakage. Whether restoring damaged threads or tapping blind or through holes after pre-drilling to 12 MM, the resilient hss construction delivers consistent edge sharpness and tight tolerances. It gives you complete control and dependable results during demanding metalworking jobs.
Product information
Key features according to our expert
- Thread type: Metric
- Pitch: 2 mm
- Quantity per set: 3
All Features
- Thread type
- Metric
- Pitch
- 2 mm
- Quantity per set
- 3
- Pitch (p)
- 2 mm
- Total length (l1)
- 80 mm
- Tool material
- HSS
- Flute length (l2)
- 30 mm
- Thread diameter (d1)
- M14
- Square wide (sw)
- 9 mm
- Quality
- ECO
- Cutting direction
- Right
- Shank ø (d2)
- 11 mm
- Tolerance d1 (tol. d1)
- ISO 2 / 6H
- Surface
- Bright
- Shank type
- Straight shank with square
- Standard
- DIN 352
- Pre-drilling diameter (ø)
- 12 mm
- Brand INTERNATIONAL TOOLS
- EAN 8716563334453
- Supplier number INTERNATIONAL TOOLS 211401400
Frequently asked questions about this product
Answered by specialists
- What do you use this hand tap set for?
- You use this 3-piece set to manually cut standard metric M14 internal threads with a 2 mm pitch in metal.
- Which taps are included in this 3-piece set?
- In accordance with DIN 352, the set contains a taper tap (no. 1), a plug tap (no. 2), and a bottoming tap (no. 3).
- What pre-drill hole diameter is required for this M14 tap?
- For an M14 metric thread with a 2 mm pitch, you need to pre-drill a hole of 12 mm.
- What material are the hand taps made of?
- They are made of high-speed steel (HSS), ensuring durable performance during general metalworking tasks.
Questions about this product?
Our product specialists are happy to help with any questions about this range. Call, email or chat with us!
Chat with us