r: 08123634 p: 37.685 pid: 166858 b: HG q: 0 st: lt: 8 ean: 0735669002170 sr: HG 110500100 sr_no_br: 110500100 sr_no_br_cl: 110500100 sr_cl: HG110500100 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 5 l Packaging Jerrycan Physical state Liquid n: HG 110500100 tile protector 5000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description HG tile protector is an easy-to-apply, liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also deepening its colour and structure. This protective film also gives an anti-slip effect. Application Tile cleaner Instructions for use The surface must be completely clean, free of grease and dust The glue/soil and joints of new floors should be fully cured and dry This usually requires 4-6 weeks drying time Existing, still porous floors must be thoroughly dry after cleaning Floor heating must be switched off for at least 12 hours before treatment with this product Porous floors must first be treated with HG tile impregnating protector (product 13) Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used On a coarse surface, use a paint roller (fur roller) Pour the liquid onto the floor and spread in straight lines in one direction Do not twist or rub When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 80 m² per 2 litres per coat ds: dsc: kts: tile protector 5000 ml kpn: 110500100 kpn_dash: kpn_clear: 110500100 bkpn: HG 110500100 bkpn_clear: HG 110500100 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 110500100 sr_ns: HG110500100
r: 08123572 p: 21.818 pid: 166814 b: HG q: 0 st: lt: 8 ean: 8711577191030 sr: HG 506100103 sr_no_br: 506100103 sr_no_br_cl: 506100103 sr_cl: HG506100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 506100103 natural stone protector impregnating 1 l cn: COATING cn2: COATING cn_clear: COATING d: Product description Also for granite and marble composite Protects against dirt and (grease) stains HG natural stone impregnating protector is a special pre-treatment for marble and other types of natural stone such as travertine, bluestone, etc., but is also extremely suitable for concrete tiles with pieces of natural stone incorporated, such as granito and marble composite. This unique product penetrates deep into the pores of the natural stone and thus stops the absorption action. This prevents the penetration of dirt and (grease) stains, without affecting the original character of the natural stone or sealing off the floor from moisture from below, so the floor can continue to "breathe", as it were. This product contains no silicones, dries quickly and can be used both indoors and outdoors. 1 litre is good for 10 to 50 m², depending on the porosity of the floor. Instructions for use The surface must be completely clean, free of grease and dust For any necessary treatments: see the HG natural stone floors treatment matrix on the side of this bottle The glue/substance and joints of new floors must be fully cured and dry This usually takes 4-6 weeks Existing floors must be completely dry after cleaning; allow at least 3 days for this to happen However, highly porous tiles, such as sand-lime brick, require more time to completely lose the water For this type of natural stone, we recommend at least 1 week However, if the floor has underfloor heating switched on, a drying time of 24 hours is sufficient The underfloor heating must be switched off for at least 12 hours before treatment with this product The liquid must be applied pure and, preferably, evenly in one direction using a paint roller On (high) gloss floors, this product must be applied and rubbed with a lint-free cloth If, 10 minutes after application, there is still some product on the natural stone that has not been absorbed, remove it immediately with a dry and lint-free cloth For very porous tiles, a 2nd treatment is recommended A second coat can be applied about 1 hour after the first treatment Approximately 3 hours after the last treatment the floor can be walked on normally again and 12 hours after the last treatment the floor is fully protected Consumption: Highly porous natural stone: 10-20 m2 per litre Less porous and high-gloss natural stone: 20-50 m2 per litre ds: dsc: kts: natural stone protector impregnating 1 l kpn: 506100103 kpn_dash: kpn_clear: 506100103 bkpn: HG 506100103 bkpn_clear: HG 506100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 506100103 sr_ns: HG506100103
r: 08123633 p: 20 pid: 166845 b: HG q: 0 st: lt: 8 ean: 8711577189433 sr: HG 110200103 sr_no_br: 110200103 sr_no_br_cl: 110200103 sr_cl: HG110200103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 2 l Packaging Jerrycan Physical state Liquid n: HG 110200103 tile protector 2000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives silk gloss HG tile protector is an easy-to-apply, liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also deepening its colour and structure. This protective film also provides an anti-slip effect. Instructions for use The substrate must be completely clean, grease- and dust-free The glue/soil and joints of new floors must be fully cured and dry This usually requires 4-6 weeks drying time Existing, still porous floors must be completely dry after cleaning Floor heating must be switched off for at least 12 hours before treatment with this product Porous floors must first be treated with HG tile impregnating protector (product 13) Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used On a coarse surface, use a paint roller (fur roller) Pour the liquid onto the floor and spread in straight lines in one direction Do not twist or rub When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 80 m² per 2 litres per coat ds: dsc: kts: tile protector 2000 ml kpn: 110200103 kpn_dash: kpn_clear: 110200103 bkpn: HG 110200103 bkpn_clear: HG 110200103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 110200103 sr_ns: HG110200103
r: 08123629 p: 20 pid: 166856 b: HG q: 0 st: lt: 8 ean: 8711577190606 sr: HG 391100103 sr_no_br: 391100103 sr_no_br_cl: 391100103 sr_cl: HG391100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 391100103 tile protector impregnating 1 l cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against dirt and (grease) stains HG tile impregnating protector (product 13) is a special basic treatment for (new) unglazed tiles and flagstones. This unique product stops tiles absorbing and prevents the penetration of dirt and (grease) stains, without affecting the original character of the tile or sealing the floor. It contains no silicones, dries quickly and is suitable for all types of porous and low-porosity tiles and flagstones. The product can be used both indoors and outdoors. Depending on the material, 1 litre is good for up to 40 m² of floor space. Instructions for use The surface must be completely clean, free of grease and dust For any necessary treatments: see the HG tile floors treatment matrix on the side of this bottle The adhesive/specimen and joints of new floors must be fully cured and dry This usually requires a drying time of 4-6 weeks Existing floors must be thoroughly dry after cleaning, allow at least 3 days for this to happen However, highly porous tiles, such as terracotta, need more time to completely lose water For these types of tiles, we recommend at least 1 week However, if the floor has underfloor heating switched on, a drying time of 24 hours is sufficient The underfloor heating must be switched off for at least 12 hours before treating with this product Apply the liquid undiluted, preferably using a paint roller, evenly and in one direction If, 10 minutes after application, there is still some product on the tiles, which has not been absorbed, it should be removed immediately with a dry and lint-free cloth For very porous tiles, a 2nd treatment is recommended. A second coat can be applied about 1 hour after the first treatment Approximately 3 hours after the last treatment the floor can be walked on normally again and 12 hours after the last treatment the floor is fully protected Consumption: Highly porous tiles 10-20 m2 per treatment Low-porous tiles: 20-40 m2 per treatment ds: dsc: kts: tile protector impregnating 1 l kpn: 391100103 kpn_dash: kpn_clear: 391100103 bkpn: HG 391100103 bkpn_clear: HG 391100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 391100103 sr_ns: HG391100103
r: 08123675 p: 13.719 pid: 166881 b: HG q: 0 st: lt: 8 ean: 8711577190101 sr: HG 244025103 sr_no_br: 244025103 sr_no_br_cl: 244025103 sr_cl: HG244025103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 244025103 wall and floor joint protector 250 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Makes joints impervious to oil Grease and moisture Absolutely colourless Including pipette HG wall and floor grout protector adheres to the cement joint and thus provides maximum, transparent protection against penetration of, for example, (edible) oil, grease and moisture. It also prevents limescale deposits. Many joints are porous and therefore easily absorb dirt, grease and moisture. Spilling wine, soft drinks or something greasy, for example, can cause stains that are difficult to remove. Dirty water can also penetrate the joints during cleaning, making them dirty and difficult to clean over time. Wall joints in damp rooms, such as the bathroom, can additionally be affected by mould and limescale. 250 ml is good for about 30 to 40 m² of joint area. Instructions for use The joints must be clean and dry First clean your joints thoroughly with HG grout cleaner Rinse the joints with clean water and then allow the joints to dry thoroughly for 24 hours Allow new joints to harden completely and dry Floor joints in bathrooms and kitchens and frequently walked on floor joints (entrance/hallway): Apply HG wall and floor grout protector using the pipette provided Use 1 to 2 ml of liquid per metre of joint (0.5 cm wide) Joints wall surface (kitchen/sanitary): Apply HG wall and floor joint protector using a brush to the joints and leave to dry for 1 hour Then apply a second coat The product must be absorbed into the joint within 5 minutes If not, remove excess with a clean cloth After 36 to 48 hours the surface may be cleaned normally again For floor joints, the floor can be walked on after approx. 3 hours Floors in the shower can be used again after 8 hours Follow the instructions for use Over-application may cause yellowing of joints Consumption: 250 ml per 30-40 m² floor area (assuming 30 x 30 cm floor tiles and a joint of 0.5 cm) ds: dsc: kts: wall and floor joint protector 250 ml kpn: 244025103 kpn_dash: kpn_clear: 244025103 bkpn: HG 244025103 bkpn_clear: HG 244025103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 244025103 sr_ns: HG244025103
r: 08123569 p: 13.553 pid: 166799 b: HG q: 0 st: lt: 8 ean: 8711577189921 sr: HG 201100103 sr_no_br: 201100103 sr_no_br_cl: 201100103 sr_cl: HG201100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l ADR packing group ADR class UN number Packaging Bottle Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P333 + P313; P501 H-statements H317; H319 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point >60 °C n: HG 201100103 natural stone protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against wear and tear and topcoat deterioration Gives gloss For all types of natural stone floors HG natural stone protector is a very easy-to-apply liquid polymer emulsion which, once dry, forms a shiny and wafer-thin but extremely strong and protective film. This protects the top layer of natural stone against wear and tear and damage or attack by acids such as soft drinks and wine. This protector also gives an anti-slip effect. Application Cleaning floor Instructions for use The surface must be completely clean, free of grease and dust For the necessary treatments: see the HG natural stone floors treatment matrix on the side of this bottle The adhesive/specs and joints of new floors must be fully cured and dry This usually requires a drying time of 4-6 weeks Existing floors must be thoroughly dry after cleaning Any underfloor heating should be switched off for at least 12 hours before applying this product For good distribution, use a wax dispenser (see illustration on front of this bottle) If desired, a lint-free, clean (tea) cloth wrapped around a squeegee can also be used On coarse surfaces, use a paint roller (fur roller), but avoid excessive foaming during application with the roller Dilute the liquid 1:1 with cold water, then pour the solution over the floor and spread it, without exerting pressure on the wax dispenser or roller, in one direction over the floor When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 60-80 m2 per litre per coat ds: dsc: kts: natural stone protector 1000 ml kpn: 201100103 kpn_dash: kpn_clear: 201100103 bkpn: HG 201100103 bkpn_clear: HG 201100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 201100103 sr_ns: HG201100103
r: 08123591 p: 12.561 pid: 166795 b: HG q: 0 st: lt: 8 ean: 8711577189914 sr: HG 200100103 sr_no_br: 200100103 sr_no_br_cl: 200100103 sr_cl: HG200100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l ADR packing group ADR class UN number Packaging Bottle Principal hazard property GHS07 Harmful or irritant Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P333 + P313; P501 H-statements H317; H319 Hazard class GHS07 Harmful or irritant Physical state Liquid Flash point >60 °C n: HG 200100103 parquet protector gloss 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against wear and scratches HG parquet protector gloss is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the parquet's finish against wear, scratches and other damage. This protective film also gives an anti-slip effect. Application Parquet protector Instructions for use Even with new parquet, the surface must be completely clean, grease- and dust free Remove any old wax, polish and polymer layers For any necessary treatments: see the HG parquet floor treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used Pour the liquid undiluted over the floor and, without exerting pressure on the wax dispenser or squeegee, spread it over the floor in the direction of the wood grain When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary Approximately 1 to 2 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 40 m2 per litre per coat ds: dsc: kts: parquet protector gloss 1000 ml kpn: 200100103 kpn_dash: kpn_clear: 200100103 bkpn: HG 200100103 bkpn_clear: HG 200100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 200100103 sr_ns: HG200100103
r: 08123573 p: 11.735 pid: 166788 b: HG q: 0 st: lt: 8 ean: 8711577190804 sr: HG 449005103 sr_no_br: 449005103 sr_no_br_cl: 449005103 sr_cl: HG449005103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 50 ml EUH-statements EUH066 ADR packing group III ADR class 3 UN number UN3295 Packaging Bottle Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P301 + P310; P331; P501 H-statements H226; H304 Hazard class GHS02 Flammable; GHS08 Health hazard Physical state Liquid Flash point 56 °C n: HG 449005103 natural stone colour thinner 50 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Restores the colour Deepens the colour Protects against dirt and wear With or without gloss of your choice Dark types of natural stone, such as dark granite, Belgian bluestone, blue stone, etc., will show wear through use, manifesting as dull, grey walkways or spots. HG natural stone colour diluter (product 48) is a professional product which deepens the colour of your natural stone and brings it back to life. In addition, this unique composition impregnates, nourishes and protects the natural stone against dirt and stains caused by water or other liquids. It does not make the surface slippery or disrupt the natural stone's breathing process. The darker the natural stone, the more effective the HG colour diluter. Instructions for use Clean the surface, preferably with HG tile cleaner extra strong (product 20), to ensure that the surface is completely clean, free of dust, grease, wax and polish Remove any cement and/or mortar residues with HG tile cement residue remover (product 11) or HG tile cement residue remover (product 12); for marble, Belgian bluestone and other calciferous natural stone, remove the lime and/or cement residue with HG natural stone cement residue remover (product 31) Then allow the surface to dry thoroughly For floors: allow to dry for 24 hours if underfloor heating is on Switch underfloor heating off 12 hours before treatment For other surfaces allow 24 hours drying time Wear gloves during application Put a small amount of HG colour diluent on the enclosed cloth, and apply the product to the surface in a circular motion Then rub HG colour thinner with a clean, lint-free cloth After a maximum of 5 to 10 minutes, the HG colour solvent is absorbed into the surface, after which the excess material must be removed very thoroughly with a dry cloth (possibly using white spirit) Repeat the treatment on highly absorbent surfaces until the surface no longer absorbs the product (colour dilution maximum) If gloss is desired, the surface should be buffed with a clean, dry lint-free cloth after 30-40 minutes After 4 hours the treated surface is usable/ walkable and fully loadable again after 3 days After use, clean the neck and cap well before closing the bottle, so that the cap can be easily removed for the next use Consumption: 50 ml is good for approx. 5 m² ds: dsc: kts: natural stone colour thinner 50 ml kpn: 449005103 kpn_dash: kpn_clear: 449005103 bkpn: HG 449005103 bkpn_clear: HG 449005103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 449005103 sr_ns: HG449005103
r: 08123554 p: 11.68 pid: 166804 b: HG q: 0 st: lt: 8 ean: 8711577189600 sr: HG 136100103 sr_no_br: 136100103 sr_no_br_cl: 136100103 sr_cl: HG136100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P102 Physical state Liquid Flash point >100 °C n: HG 136100103 laminate protection film 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives shine Protects against wear and tear Scratches and other damage HG laminate, vinyl and PVC protector (product 70) is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the top layer of the laminate from wear, scratches and other damage. This product also masks dull spots and pre-existing damage and gives an anti-slip effect. 1 litre is good for about 60 m² per coat. Instructions for use The surface must be completely clean, grease- and dust-free, even with a new floor. Remove any old wax and polymer layers For the necessary treatments: see the HG treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, non-fluffy (tea) cloth wrapped around a squeegee can also be used Pour a small quantity of the liquid undiluted onto the floor and spread it thinly and evenly in one direction, without exerting pressure on the wax dispenser or squeegee Do not twist or rub! When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days Consumption: 60 m² per litre per coat ds: dsc: kts: laminate protection film 1000 ml kpn: 136100103 kpn_dash: kpn_clear: 136100103 bkpn: HG 136100103 bkpn_clear: HG 136100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 136100103 sr_ns: HG136100103
r: 08123632 p: 11 pid: 166888 b: HG q: 0 st: lt: 8 ean: 8711577189426 sr: HG 110100103 sr_no_br: 110100103 sr_no_br_cl: 110100103 sr_cl: HG110100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point >100 °C n: HG 110100103 tile protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Wafer-thin But extremely strong protective film Protects against penetration of dirt Stains and abrasion Gives a silky shine HG tile protector is an easy-to-apply liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also enhancing its colour and structure. This protective film also gives an anti-slip effect. Application HG tile protective film with silk gloss (product 14) is a unique and easy-to-apply polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this liquid emulsion forms a shiny and wafer-thin, but extremely strong protective film. It protects the floor tiles against wear, scratches and other damage. It also enhances the colour and structure of the floor tiles. This protective film for floor tiles, flagstones and slate also masks existing wear marks and gives an anti-slip effect. 1 litre is good for approximately 40m2 per coat. Instructions for use Surface must be completely clean, grease- and dust-free The glue/soil and joints of new floors must be fully cured and dry This usually requires 4-6 weeks drying time Existing, still porous floors must be completely dry after cleaning Floor heating must be switched off for at least 12 hours before treatment with this product Porous floors must first be treated with HG tile impregnating protector (product 13) Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used On a coarse surface, use a paint roller (fur roller) Pour the liquid onto the floor and spread in straight lines in one direction, do not twist or rub When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days Consumption: 80 m² per 2 litres per coat ds: dsc: kts: tile protector 1000 ml kpn: 110100103 kpn_dash: kpn_clear: 110100103 bkpn: HG 110100103 bkpn_clear: HG 110100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 110100103 sr_ns: HG110100103
r: 08123566 p: 10.65 pid: 166778 b: HG q: 0 st: lt: 8 ean: 8711577007591 sr: HG 272010100 sr_no_br: 272010100 sr_no_br_cl: 272010100 sr_cl: HG272010100 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 100 ml EUH-statements EUH208 ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 272010100 natural stone countertop protector 100 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against oil<, grease and dirt Good for 10 m² HG natural stone worktop protector forms an absolutely colourless and invisible protection, particularly against (edible) oils, vegetable and animal fats and many other types of soiling. The best protection is obtained on marble by applying HG natural stone kitchen top protector (product 35) (mainly protects against water-based soiling!) over the HG natural stone kitchen top protector. Application Natural stone kitchen top protector ds: dsc: kts: natural stone countertop protector 100 ml kpn: 272010100 kpn_dash: kpn_clear: 272010100 bkpn: HG 272010100 bkpn_clear: HG 272010100 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 272010100 sr_ns: HG272010100
r: 08123551 p: 10.2 pid: 166774 b: HG q: 0 st: lt: 8 ean: 8711577189440 sr: HG 113100103 sr_no_br: 113100103 sr_no_br_cl: 113100103 sr_cl: HG113100103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 1 l Packaging Bottle Physical state Liquid n: HG 113100103 plastic protector 1000 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives gloss HG plastic protector is a unique, easy-to-apply liquid polymer emulsion which, once dry, forms a shiny and wafer-thin, but extremely strong protective film. This protects plastic floors such as vinyl, linoleum, marmoleum, PVC and cast floors against wear, scratches and other damage. This protective film also masks already existing wear marks and also gives an anti-slip effect. Application HG synthetic floors protective film with gloss (product 77) is a unique and easy-to-apply polymer emulsion. After drying, this liquid emulsion forms a shiny and wafer-thin, but extremely strong protective film. It protects plastic floors such as vinyl, linoleum, marmoleum, PVC and cast floors against wear, scratches and other damage. This protective film for synthetic floors also masks existing wear marks and provides an anti-slip effect. 1 litre is good for approximately 40m2 per coat. Instructions for use Even with new plastic floors, the surface must be completely clean, grease- and dust-free Remove any old wax, polish and polymer layers For any necessary treatments: see the HG synthetic floor treatment matrix on the side of this bottle For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle) If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used Do not shake before use and pour the liquid undiluted over the floor and then spread it over the floor in one direction, without exerting pressure on the wax dispenser or squeegee When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat if necessary Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days Consumption: 40 m² per litre per coat ds: dsc: kts: plastic protector 1000 ml kpn: 113100103 kpn_dash: kpn_clear: 113100103 bkpn: HG 113100103 bkpn_clear: HG 113100103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Coating sr_no_br_cl_ns: 113100103 sr_ns: HG113100103
r: 08123612 p: 9.31 pid: 166866 b: HG q: 0 st: lt: 10 ean: 8711577308728 sr: HG 486050103 sr_no_br: 486050103 sr_no_br_cl: 486050103 sr_cl: HG486050103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml EUH-statements EUH208 ADR packing group ADR class Packaging Spray can UN number Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 486050103 mould protector 500 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Prevents mould For tile silicone joints, stucco, etc. HG mould protector is a handy spray that prevents mould from developing. This makes it ideal for the bathroom and other places where mould quickly develops. This anti-fungal product effectively seals surfaces to moisture and air. This prevents mould from developing and keeps your bathroom mould-free. The convenient thing about this spray is that it is suitable for both smooth and porous surfaces. Application Mould protector Instructions for use If mould is already present on the surface to be treated, first remove it with HG fungus cleaner Before applying HG fungus protector, clean and dry the surface well Then apply the liquid opaquely and leave to dry for approx. 30-60 minutes On smooth surfaces, polish if necessary within 10 minutes after application Repeat the treatment at least once every 2 months One 500 ml bottle is good for 10-12 m² ds: dsc: kts: mould protector 500 ml kpn: 486050103 kpn_dash: kpn_clear: 486050103 bkpn: HG 486050103 bkpn_clear: HG 486050103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 486050103 sr_ns: HG486050103
r: 08123498 p: 9.06 pid: 166715 b: HG q: 0 st: lt: 8 ean: 8711577190958 sr: HG 476030103 sr_no_br: 476030103 sr_no_br_cl: 476030103 sr_cl: HG476030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml ADR packing group II ADR class 3 Packaging Bottle Principal hazard property GHS02 Flammable UN number UN1993 Conseils de prudence (P) P101; P102; P210; P264; P305 + P351 + P338; P403 + P233; P501 H-statements H225; H319; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point 18 °C n: HG 476030103 shower cabin protector 250 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Suitable for all types of materials Very easy to apply HG shower cabin protector protects all materials in and on the shower cabin against limescale and contamination from soap residue, shower cream, skin oils, etc. HG shower cabin protector makes the glass in the shower door/wall, the frame of the shower door/wall, tiles and taps water and dirt repellent, so that all these materials remain clean and beautiful for much longer. Less cleaning is required and cleaning will also be much easier. This product is very easy to apply and works very effectively for months. Instructions for use Clean the surfaces to be treated, such as tiles, (plexiglass) glass, chrome, plastic, aluminium or ceramic, beforehand and allow to dry thoroughly. Then apply a small amount of HG shower cabin protector to a clean, dry cloth and rub in with circular movements Repeat the treatment after approx. 2 minutes Then polish with a soft, dry cloth Rub glass surfaces with a damp cloth to a shine If this protector is applied, less cleaning will be necessary and cleaning will be much easier With normal use of your shower cabin or shower, it is sufficient to apply HG shower cabin protector once every 3 months ds: dsc: kts: shower cabin protector 250 ml kpn: 476030103 kpn_dash: kpn_clear: 476030103 bkpn: HG 476030103 bkpn_clear: HG 476030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 476030103 sr_ns: HG476030103
r: 08123677 p: 8.44 pid: 166887 b: HG q: 0 st: lt: 8 ean: 8711577212940 sr: HG 647030103 sr_no_br: 647030103 sr_no_br_cl: 647030103 sr_cl: HG647030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point >100 °C n: HG 647030103 waterproof 100% synthetic textile 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description For hand and machine washing Ideal for ski and rainwear HG waterproof 100% synthetic textile has been specially developed to make polyamide, polyester, nylon and other 100% synthetic textiles water- and dirt-repellent. This product is therefore ideal for making ski and rainwear, but also, for example, garden furniture covers, water- and dirt-repellent. Moreover, this highly concentrated product is very easy to use. The content of this bottle is sufficient for up to 3 kg of synthetic textiles. Instructions for use Hand wash The garment to be treated should be clean and dry Fill a bucket, tub or basin with approximately 6 litres of lukewarm water Dilute 100 ml of product for every kilo of laundry Then immerse the garment in this solution and turn it over regularly for 15 minutes Then rinse with cold water The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Check the washing instructions of the textile whether this is allowed, otherwise dry on a clothes-line Washing machine The clothes to be treated should be clean and dry Make sure the washing machine is not completely full (up to three-quarters of the drum height), as the laundry must be able to move freely in the drum The washing machine's soap dish should be completely free of detergent residues, so clean it first if necessary. Detergent breaks down the effect of HG waterproof 100% synthetic textiles Select the garment programme (without pre-wash) or, if the washing instructions recommend it, the delicate or wool programme (without pre-wash). Do not add detergent or fabric softener The temperature depends on the fabric care instructions, but should not exceed 40ºC Start the washing machine and, after about 15 seconds, add 100 ml of product for each kilo of textile to the running water via the soap dish If these 15 seconds are not waited and the product is added too early, it may end up directly in the washing machine drain because a washing machine drains water first in the first few seconds of a new programme Do not use the product in a washing ball Finish the wash programme completely The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Consult the washing instructions of the textile whether this is permitted, otherwise dry on a clothes line ds: dsc: kts: waterproof 100% synthetic textile 300 ml kpn: 647030103 kpn_dash: kpn_clear: 647030103 bkpn: HG 647030103 bkpn_clear: HG 647030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 647030103 sr_ns: HG647030103
r: 08123479 p: 7.85 pid: 166701 b: HG q: 0 st: lt: 8 ean: 8711577017743 sr: HG 175030103 sr_no_br: 175030103 sr_no_br_cl: 175030103 sr_cl: HG175030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class 2.1 UN number UN1950 Packaging Spray can Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P210; P211; P251; P261; P271; P280; P312; P410 + P412; P501 H-statements H222; H229; H315; H319; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Aerosol Flash point <0 °C n: HG 175030103 protector textile and leather 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Protects against water, oil, grease and dirt With HG 4 in 1 protector for textiles and leather, you simply and effectively protect all types of textiles and leather. Besides the powerful water-repellent effect, this product also prevents oil, gravy, wine stains, etc. After treatment, accidents with these liquids can simply be dabbed away with an absorbent tissue. This product has countless applications, such as sofas, clothing, shoes and bags. Application HG water, oil, grease & dirt resistant for textiles protects textiles against most stains and at the same time makes the material water-repellent. Coffee stains, tea stains, oil stains, grease stains and wine stains can be simply dabbed away with an absorbent tissue after treatment with this product. Without this protection, liquids and dirt can penetrate deep into the fibres of textiles and then cause difficult or even impossible to remove stains. The product is suitable for, among others, garden furniture cushions, parasols, tents, furniture upholstery, curtains, rainwear and sportswear. Instructions for use Avoid inhalation of spray mist Use only outdoors or in a well-ventilated area Before use, test the surface for colourfastness at an inconspicuous place. Do not treat if the colour runs off The material to be treated must be clean and dry If the material to be treated is already coated, this may reduce the effectiveness of the product Hold the spray can upright and at a distance of approximately 20 cm, liberally spray HG 4 in 1 protector in even strips onto the surface to be treated Extreme overdosing (soaking) must be avoided After drying for approximately one hour, the treated material is again ready for use and perfectly protected To ensure lasting protection, repeat the treatment from time to time Consumption: The content of the can is sufficient for approx. 3.5 m2 ds: dsc: kts: protector textile and leather 300 ml kpn: 175030103 kpn_dash: kpn_clear: 175030103 bkpn: HG 175030103 bkpn_clear: HG 175030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 175030103 sr_ns: HG175030103
r: 08123605 p: 6.87 pid: 166779 b: HG q: 0 st: lt: 8 ean: 8711577190965 sr: HG 482012303 sr_no_br: 482012303 sr_no_br_cl: 482012303 sr_cl: HG482012303 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 125 ml ADR packing group ADR class UN number Packaging Bottle Conseils de prudence (P) P101; P102 Physical state Liquid Flash point 200 °C n: HG 482012303 stainless steel protector 125 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Gives extra shine HG stainless steel protector is a ready-to-use maintenance and protection product for stainless steel surfaces. The product is very easy to apply and gives a streak-free shine that lasts for weeks. It is therefore ideal for use in the kitchen on stainless steel extractor hoods, chimneys, cooking hobs, rear walls, panels, etc. Application HG stainless steel quick shine makes stainless steel shine like never before and is indispensable in the kitchen. It is a ready-to-use maintenance and protective product that makes dull surfaces shine again. Moreover, it reduces the adhesion of dirt and grease to the surface, making maintenance considerably easier. The specially selected mineral oils ensure long-lasting results. The product can be used on extractor hoods, fireplaces, backsplashes, ovens, refrigerators and microwaves, among others. Instructions for use Drip a few drops of HG stainless steel protector onto a lint-free dry cloth and rub the surface evenly with it. If necessary, after drying for 2 minutes, rub again very lightly with a soft dry cloth ds: dsc: kts: stainless steel protector 125 ml kpn: 482012303 kpn_dash: kpn_clear: 482012303 bkpn: HG 482012303 bkpn_clear: HG 482012303 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 482012303 sr_ns: HG482012303
r: 08123678 p: 4.77 pid: 166917 b: HG q: 0 st: lt: 8 ean: 8711577018658 sr: HG 177030103 sr_no_br: 177030103 sr_no_br_cl: 177030103 sr_cl: HG177030103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml ADR packing group ADR class Packaging Bottle Principal hazard property GHS07 Harmful or irritant UN number Conseils de prudence (P) P101; P102; P264; P302 + P352; P305 + P351 + P338; P501 H-statements H315; H319; H412 Hazard class GHS07 Harmful or irritant Physical state Liquid n: HG 177030103 waterproof textile 300 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description For hand and machine washing Ideal for (rain) coats HG waterproof cotton, linen, wool and mixed textiles has been specially developed to make cotton, linen, wool and mixed textiles (textiles made of partly natural materials such as cotton and partly synthetic materials such as polyamide or polyester) water- and dirt-repellent. This product is therefore ideal for making (rain) coats, children's clothing, jeans, furniture covers, garden furniture covers and tablecloths water- and dirt-repellent. Moreover, this highly concentrated product is very easy to use. The content of this bottle is sufficient for up to 3 kg of textiles. For best results, preferably use the hand-washing method. For applications on parasols, awnings, groundsheets or textiles made of 100% synthetic fibres, we recommend HG water, oil, grease and dirt repellent for textiles. Instructions for use Hand wash method The garment to be treated should be clean and dry Fill a bucket, tub or basin with approximately 6 litres of lukewarm water Mix the entire contents of this bottle with the water Then add the garment to this solution and turn it over regularly for 15 minutes Then rinse with cold water The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Check the washing instructions of the textile whether this is allowed, otherwise dry on a clothes-line Washing machine The clothes to be treated should be clean and dry The soap dish of the washing machine should be completely free of detergent residues, so clean it first if necessary. Detergent breaks down the effect of HG waterproof cotton, linen, wool and mixed textiles Select the garment programme (without pre-wash) or, if the washing instructions recommend it, the delicate or wool programme (without pre-wash). Do not add detergent or fabric softener The temperature depends on the fabric care instructions, but should not exceed 40ºC Start the washing machine and after about 15 sec Add the entire contents of this bottle to the running water via the soap dish If these 15 seconds are not waited and the product is added too early, it may end up directly in the washing machine drain because a washing machine first drains water the first few seconds of a new programme Do not use the product in a washing ball Finish the wash programme completely The effect of this product is enhanced by heat, therefore preferably iron the textile before it is completely dry or dry it in a tumble dryer. Consult the washing instructions of the textile whether this is permitted, otherwise dry on a clothes line ds: dsc: kts: waterproof textile 300 ml kpn: 177030103 kpn_dash: kpn_clear: 177030103 bkpn: HG 177030103 bkpn_clear: HG 177030103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 177030103 sr_ns: HG177030103
r: 08123684 p: 6.55 pid: 166883 b: HG q: 0 st: lt: 8 ean: 8711577191283 sr: HG 622050103 sr_no_br: 622050103 sr_no_br_cl: 622050103 sr_cl: HG622050103 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Net volume 500 ml EUH-statements EUH208 ADR packing group ADR class UN number Packaging Spray can Conseils de prudence (P) P101; P102 Physical state Liquid n: HG 622050103 sunscreen waterproof 500 ml cn: COATING cn2: COATING cn_clear: COATING d: Product description Also protects against dirt Prevents rainwater from penetrating For easy and quick (re-)waterproofing of awnings, awnings, (front) tents, canvas (tarpaulins), pavilion and party tents. Application HG waterproof for sunshades, tarpaulins and tents waterproofs sunshades, canvas tarpaulins, (front) tents, awnings, pavilion tents and party tents. The product is suitable for cotton, polyester cotton, canvas, linen, acrylic and vinyl. To clean the above, we recommend HG awning, tarpaulin and tent cleaner. Instructions for use Apply in windy weather The surface to be treated must be clean A dirty surface can adversely affect the effect of this product If necessary, clean with HG awning cleaner beforehand Turn the nipple on the front a quarter turn Then spray the liquid evenly onto the surface to be treated Ensure that the surface is well taut for optimum distribution Let the product dry completely Do not use if precipitation is expected within the hour After use, turn the nipple back a quarter turn (OFF) Consumption: bottle is sufficient for up to 10 m2 ds: dsc: kts: sunscreen waterproof 500 ml kpn: 622050103 kpn_dash: kpn_clear: 622050103 bkpn: HG 622050103 bkpn_clear: HG 622050103 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Coating | Home / Our brands / Hg / Hg technical and chemical products / Hg surface treatment and repair / Hg other surface treatment / Hg coating sr_no_br_cl_ns: 622050103 sr_ns: HG622050103
