Product description
- Gives shine
- Protects against wear and tear
- Scratches and other damage
HG laminate, vinyl and PVC protector (product 70) is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the top layer of the laminate from wear, scratches and other damage. This product also masks dull spots and pre-existing damage and gives an anti-slip effect. 1 litre is good for about 60 m² per coat.
Instructions for use
- The surface must be completely clean, grease- and dust-free, even with a new floor.
- Remove any old wax and polymer layers
- For the necessary treatments: see the HG treatment matrix on the side of this bottle
- For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle)
- If desired, a clean, non-fluffy (tea) cloth wrapped around a squeegee can also be used
- Pour a small quantity of the liquid undiluted onto the floor and spread it thinly and evenly in one direction, without exerting pressure on the wax dispenser or squeegee
- Do not twist or rub!
- When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary
- Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days
- Consumption: 60 m² per litre per coat
