- Min. diameter (nail): 2,9 mm
- Min. nail length: 50 mm
- Max. nail length: 90 mm
Air-powered nailers, brad guns, staplers and sealant guns
Compressed-air tools for nailing, stapling and applying sealant, used by carpenters, interior fitters and finishing contractors. The choice depends on what you are fixing: a structural joint, a skirting board or batten, cladding or a joint to seal.
For load-bearing work and formwork there is the construction nail gun, taking nails up to 90 mm. For finishing, choose by nail thickness, expressed in gauge: an 18 GA brad gun leaves the smallest hole in mouldings, while a 16 GA or 15 GA finisher holds more firmly in skirting and frames, with lengths up to 64 or 65 mm. Look too at the magazine, straight or angled, and at the nail type, such as threaded welded nails at 16°. Staplers handle cladding, insulation and upholstery; check the staple system and the length range, from short staples up to 40 mm.
Compressed-air sealant guns for 310 ml cartridges apply sealant and adhesive evenly without hand effort. Brands include Paslode, Haubold, DeWalt, Makita, Metabo, Soudal, Teroson and more. The group falls under pneumatic tools, next to pneumatic sanders and grinders for finishing the same workpiece.
- Min. staple length: 15 mm
- Crown width (staple): 5,8 mm
- Min. staple diameter: 1 mm
- Min. nail length: 15 mm
- Max. nail length: 50 mm
- Max. working pressure: 8,3 bar
- Min. diameter (nail): 1,2 mm
- Min. nail length: 15 mm
- Max. nail length: 50 mm
- Min. diameter (nail): 1,3 mm
- Min. nail length: 25 mm
- Max. nail length: 64 mm
- For cartridge with capacity: 310 ml
- Gun type: Cartridge gun
- Max. air pressure: 6 bar
- Min. nail length: 16 mm
- Max. nail length: 50 mm
- Max. working pressure: 8 bar
- For cartridge with capacity: 310 ml
- Gun type: Cartridge gun
- Connection size (air): 1/4"
- Min. staple length: 4 mm
- Max. working pressure: 8 bar
- Max. staple length: 16 mm
- Min. nail length: 20 mm
- Max. nail length: 64 mm
- Max. working pressure: 8,3 bar
- Min. nail length: 25 mm
- Max. nail length: 50 mm
- Max. working pressure: 8,3 bar
- Min. nail length: 16 mm
- Max. nail length: 50 mm
- Max. working pressure: 8 bar
- Min. nail length: 32 mm
- Max. nail length: 64 mm
- Max. working pressure: 8,3 bar
- Min. staple length: 15 mm
- Max. working pressure: 8,3 bar
- Max. staple length: 40 mm
- Min. nail length: 25 mm
- Max. nail length: 65 mm
- Max. working pressure: 8,3 bar
- Min. staple length: 4 mm
- Max. staple length: 16 mm
- Max. working pressure: 7 bar
- Min. diameter (nail): 0,6 mm
- Min. nail length: 15 mm
- Max. nail length: 50 mm
- Min. staple length: 9,5 mm
- Min. staple diameter: 25 mm
- Max. staple diameter: 25 mm
- Min. nail length: 32 mm
- Max. nail length: 64 mm
- Max. working pressure: 8,3 bar
- Min. nail length: 10 mm
- Max. nail length: 57 mm
- Max. working pressure: 8 bar