r: 03343199 p: 2290.234 pid: 166131 b: FLUKE q: 0 st: lt: 10 ean: 0195112119433 sr: FLUKE 5580834 sr_no_br: 5580834 sr_no_br_cl: 5580834 sr_cl: FLUKE5580834 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH multifunctional installation tester in case - 5580834 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1673 FC multifunction installation tester will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester in case kpn: 1673 FC SCH kpn_dash: kpn_clear: 1673FCSCH bkpn: FLUKE 1673 FC SCH bkpn_clear: FLUKE 1673FCSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5580834 sr_ns: FLUKE5580834
r: 02952153 p: 2286.28 pid: 72749 b: FLUKE q: 0 st: lt: 8 ean: 0095969673594 sr: FLUKE 4352574 sr_no_br: 4352574 sr_no_br_cl: 4352574 sr_cl: FLUKE4352574 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD5 pressure module (-1 - 2 bar) - 4352574 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 30 psi (-1 to 2 bar), (-100 to 200 kPa) kts: pressure module (-1 - 2 bar) kpn: 750PD5 kpn_dash: kpn_clear: 750PD5 bkpn: FLUKE 750PD5 bkpn_clear: FLUKE 750PD5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352574 sr_ns: FLUKE4352574
r: 02952115 p: 2286.28 pid: 71421 b: FLUKE q: 0 st: lt: 8 ean: 0095969673488 sr: FLUKE 4352467 sr_no_br: 4352467 sr_no_br_cl: 4352467 sr_cl: FLUKE4352467 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA6 pressure module (0 - 7 bar) - 4352467 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 100 psi (0 to 7 bar), (0 to 700 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 7 bar) kpn: 750PA6 kpn_dash: kpn_clear: 750PA6 bkpn: FLUKE 750PA6 bkpn_clear: FLUKE 750PA6 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352467 sr_ns: FLUKE4352467
r: 02952157 p: 2286.28 pid: 73464 b: FLUKE q: 0 st: lt: 8 ean: 0095969673617 sr: FLUKE 4352595 sr_no_br: 4352595 sr_no_br_cl: 4352595 sr_cl: FLUKE4352595 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD6 pressure module (-1 - 7 bar) - 4352595 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 100 psi (-1 to 7 bar), (-100 to 700 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 7 bar) kpn: 750PD6 kpn_dash: kpn_clear: 750PD6 bkpn: FLUKE 750PD6 bkpn_clear: FLUKE 750PD6 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352595 sr_ns: FLUKE4352595
r: 02952128 p: 2286.28 pid: 72745 b: FLUKE q: 0 st: lt: 8 ean: 0095969673549 sr: FLUKE 4352521 sr_no_br: 4352521 sr_no_br_cl: 4352521 sr_cl: FLUKE4352521 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PV4 pressure module (-1 bar) - 4352521 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi (-1 bar), (-100 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 bar) kpn: 750PV4 kpn_dash: kpn_clear: 750PV4 bkpn: FLUKE 750PV4 bkpn_clear: FLUKE 750PV4 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352521 sr_ns: FLUKE4352521
r: 02952113 p: 2286.28 pid: 71417 b: FLUKE q: 0 st: lt: 8 ean: 0095969673471 sr: FLUKE 4352459 sr_no_br: 4352459 sr_no_br_cl: 4352459 sr_cl: FLUKE4352459 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA5 pressure module (0 - 2 bar) - 4352459 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 30 psi (0 to 2 bar), (0 to 200 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 2 bar) kpn: 750PA5 kpn_dash: kpn_clear: 750PA5 bkpn: FLUKE 750PA5 bkpn_clear: FLUKE 750PA5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352459 sr_ns: FLUKE4352459
r: 02952119 p: 2286.28 pid: 72737 b: FLUKE q: 0 st: lt: 8 ean: 0095969673495 sr: FLUKE 4352471 sr_no_br: 4352471 sr_no_br_cl: 4352471 sr_cl: FLUKE4352471 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA27 pressure module (0 - 20 bar) - 4352471 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 300 psi (0 to 20 bar), (0 to 2000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 20 bar) kpn: 750PA27 kpn_dash: kpn_clear: 750PA27 bkpn: FLUKE 750PA27 bkpn_clear: FLUKE 750PA27 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352471 sr_ns: FLUKE4352471
r: 02952160 p: 2286.28 pid: 73469 b: FLUKE q: 0 st: lt: 8 ean: 0095969673624 sr: FLUKE 4352602 sr_no_br: 4352602 sr_no_br_cl: 4352602 sr_cl: FLUKE4352602 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD7 pressure module (-1 - 14 bar) - 4352602 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 200 psi (-1 to 14 bar), (-100 to 1400 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 14 bar) kpn: 750PD7 kpn_dash: kpn_clear: 750PD7 bkpn: FLUKE 750PD7 bkpn_clear: FLUKE 750PD7 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352602 sr_ns: FLUKE4352602
r: 08107142 p: 2220.991 pid: 73526 b: FLUKE q: 0 st: lt: 8 ean: 0195112035023 sr: FLUKE 5315203 sr_no_br: 5315203 sr_no_br_cl: 5315203 sr_cl: FLUKE5315203 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTES-LITE-M10 software licence code for TruTest Lite (10 workstations) - 5315203 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 10 workstations The ability to assign 2 users to each of the 10 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Lite (10 workstations) kpn: TRUTES-LITE-M10 kpn_dash: TRUTES kpn_clear: TRUTESLITEM10 bkpn: FLUKE TRUTES-LITE-M10 bkpn_clear: FLUKE TRUTESLITEM10 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315203 sr_ns: FLUKE5315203
r: 02953736 p: 2207.727 pid: 72790 b: FLUKE q: 0 st: lt: 10 ean: 0095969666848 sr: FLUKE 4325155 sr_no_br: 4325155 sr_no_br_cl: 4325155 sr_cl: FLUKE4325155 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1623-2 GEO earth dispersion resistance meter - 4325155 cn: EARTH RESISTANCE TESTER cn2: EARTH RESISTANCE TESTER cn_clear: EARTHRESISTANCETESTER d: Product description: The Fluke 1623-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure easy and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1623-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1623-2 is a unique earth ground tester that can take earth ground measurements in all four ways. 3- and 4-pole potential loss measurement (using electrodes) 4-pole ground resistance test (using electrodes) Selective test (using 1 current clamp and electrodes) Electrode-less test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide 2 measuring leads USB cable kts: GEO earth dispersion resistance meter kpn: 1623-2 kpn_dash: 1623 kpn_clear: 16232 bkpn: FLUKE 1623-2 bkpn_clear: FLUKE 16232 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth resistance tester sr_no_br_cl_ns: 4325155 sr_ns: FLUKE4325155
r: 02952187 p: 2185.289 pid: 72763 b: FLUKE q: 0 st: lt: 8 ean: 0095969673723 sr: FLUKE 4352706 sr_no_br: 4352706 sr_no_br_cl: 4352706 sr_cl: FLUKE4352706 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750RD5 pressure module (-1 - 2 bar) - 4352706 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 30 psi (-1 to 2 bar), (-100 to 200 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 2 bar) kpn: 750RD5 kpn_dash: kpn_clear: 750RD5 bkpn: FLUKE 750RD5 bkpn_clear: FLUKE 750RD5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352706 sr_ns: FLUKE4352706
r: 02952189 p: 2185.289 pid: 71240 b: FLUKE q: 0 st: lt: 8 ean: 0095969673730 sr: FLUKE 4352714 sr_no_br: 4352714 sr_no_br_cl: 4352714 sr_cl: FLUKE4352714 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750RD6 pressure module (-1 - 7 bar) - 4352714 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -12 psi to 100 psi (-0.8 to 7 bar), (-80 to 700 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 7 bar) kpn: 750RD6 kpn_dash: kpn_clear: 750RD6 bkpn: FLUKE 750RD6 bkpn_clear: FLUKE 750RD6 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352714 sr_ns: FLUKE4352714
r: 02952191 p: 2185.289 pid: 72767 b: FLUKE q: 0 st: lt: 8 ean: 0095969673747 sr: FLUKE 4352723 sr_no_br: 4352723 sr_no_br_cl: 4352723 sr_cl: FLUKE4352723 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750RD27 pressure module (-0.8 - 20 bar) - 4352723 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -12 psi to 300 psi (-0.8 to 20 bar), (-80 to 2000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-0.8 - 20 bar) kpn: 750RD27 kpn_dash: kpn_clear: 750RD27 bkpn: FLUKE 750RD27 bkpn_clear: FLUKE 750RD27 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352723 sr_ns: FLUKE4352723
r: 02958459 p: 2145.677 pid: 71632 b: FLUKE q: 0 st: lt: 8 ean: 0095969643757 sr: FLUKE 4234361 sr_no_br: 4234361 sr_no_br_cl: 4234361 sr_cl: FLUKE4234361 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 709H precision loop calibrator with HART communication/diagnosis - 4234361 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 709 precision loop calibrator is built around a user-friendly interface with a 'Quick-Set' encoder dial. The protective holster fits snugly in the technician's hand and the large backlit display is easy to read, even in dark, cramped working environments. This instrument reduces the time of measuring, or generating, voltage or current and feeding a loop. It is designed with time-saving and high-quality results in mind. The 709H provides HART communication and supports a specially selected set of universal and common HART commands. This makes the 709H unique: an affordable, compact loop calibrator on the one hand, and a powerful tool for HART communication on the other. Key features Highest-in-class accuracy of 0.01% of reading Rugged compact design runs on (6) standard AAA batteries Intuitive user interface with 'Quick-Set' button for quick set-up and user-friendliness Built-in selectable 250?resistor for HART communication 24V loop power supply with mA measurement mode (-25% to 125%) Resolution of 1 µA in mA ranges and 1 mV in voltage ranges Simple two-wire connection for all measurements Automatic switch-off to save battery power (adjustable up to 30 minutes) Variable step and rise time in seconds Adjustable range selection (0 to 20 mA or 4 to 20 mA) Valve test (simulating average mA values with % keys) HART-specific functions and capabilities include: Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all HART transmitters in your installation, in .csv or in .txt format. Log or record data about a particular transmitter for the purpose of troubleshooting. The data logging function has a selectable recording interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data group contains the measurement of the 709H, all four process variables and the default status conditions. In the communicator mode, the user can read basic information from the device, perform diagnostic tests and set the calibration of most HART communication-capable transmitters. In the past, this was only possible with a dedicated communicator, a high-end multifunction calibrator or a laptop with a HART modem. With the Fluke 709H, practically any technician can service and support HART devices. ds: dsc: Scope of delivery Fluke 709H precision current loop calibrator with HART communication/diagnostics 754-8016 crocodile clip set 75X-8014 stackable test lead set TP220-4201 measuring probes AC280-5001 Suregrip-haakklemmen Carrying case Six AAA batteries (installed) CD-ROM with product manual Quick guide Safety information kts: precision loop calibrator with HART communication/diagnosis kpn: 709H kpn_dash: kpn_clear: 709H bkpn: FLUKE 709H bkpn_clear: FLUKE 709H c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4234361 sr_ns: FLUKE4234361
r: 02951902 p: 2144.426 pid: 71371 b: FLUKE q: 0 st: lt: 8 ean: 0095969327718 sr: FLUKE 2547215 sr_no_br: 2547215 sr_no_br_cl: 2547215 sr_cl: FLUKE2547215 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 3000G pressure calibrator (207 bar) - 2547215 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (207 bar) kpn: 717 3000G kpn_dash: kpn_clear: 7173000G bkpn: FLUKE 717 3000G bkpn_clear: FLUKE 7173000G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547215 sr_ns: FLUKE2547215
r: 02951904 p: 2144.426 pid: 71182 b: FLUKE q: 0 st: lt: 8 ean: 0095969327732 sr: FLUKE 2547232 sr_no_br: 2547232 sr_no_br_cl: 2547232 sr_cl: FLUKE2547232 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 5000G pressure calibrator (345 bar) - 2547232 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (345 bar) kpn: 717 5000G kpn_dash: kpn_clear: 7175000G bkpn: FLUKE 717 5000G bkpn_clear: FLUKE 7175000G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547232 sr_ns: FLUKE2547232
r: 02951905 p: 2144.426 pid: 71375 b: FLUKE q: 0 st: lt: 8 ean: 0095969605632 sr: FLUKE 4058813 sr_no_br: 4058813 sr_no_br_cl: 4058813 sr_cl: FLUKE4058813 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 10000G pressure calibrator (690 bar) - 4058813 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrator delivers excellent performance and is extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. Easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. Protected against electromagnetic interference, dust and splash water and equipped with a removable battery cover, which allows quick battery replacement. This type of calibrator is available in 9 models and measures pressures up to 345 bar/5000 psi (for the measurement range of this particular item, see "Scope of delivery" above). They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features Measures pressure, 0.05% of full scale with internal pressure sensor to bar/psi value listed at "Scope of delivery" above Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: Scope of delivery Pressure calibrator 0 - 10,000 psi (0 to 690 bar, 0 to 69,000 kPa) Yellow protective holster with compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: pressure calibrator (690 bar) kpn: 717 10000G kpn_dash: kpn_clear: 71710000G bkpn: FLUKE 717 10000G bkpn_clear: FLUKE 71710000G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4058813 sr_ns: FLUKE4058813
r: 08107056 p: 2103.489 pid: 158860 b: FLUKE q: 0 st: lt: 8 ean: 0095969807845 sr: FLUKE 4722828 sr_no_br: 4722828 sr_no_br_cl: 4722828 sr_cl: FLUKE4722828 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789FC-MA/KIT digital multimeter with mA loop calibrator + IR3000 FC connector + 4-20mA DC current clamp - 4722828 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description 789 Compact digital multimeter and mA loop calibrator solution Fully equipped mA loop calibrator with built-in 24 V loop power supply Troubleshoot any part of a control loop quickly and easily Large, clear display with dual measurements Product description IR3000 FC The Fluke Connect ir3000 FC connector lets you wirelessly transmit data from your existing Fluke instruments to your smartphone Fits over the infrared port of your existing Fluke instruments Instantly graph, store and share your instrument readings with your team from your smartphone Track and diagnose problems quickly and reliably Capture primary screen readings efficiently and securely on site Share results with your team instantly Upgradeable via USB Product description a3004 FC The Fluke a3004 FC wireless 4-20 mA DC current clamp is a fully functional current clamp that transmits readings wirelessly to other Fluke Connect-enabled main units, such as: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App TiX560 and TiX520 Key features of the Fluke a3004 FC wireless 4-20 mA DC current clamp are: Measures signals from 4 to 20 mA without "breaking the loop" Detachable current clamp with extension cable for measurements in narrow openings Use as a stand-alone meter or as part of the system A log function for recording and storing up to 65,000 measured values ds: dsc: Scope of delivery 789 compact digital multimeter and mA loop calibrator solution IR3000 FC connector a3004 wireless 4-20 mA DC current clamp kts: digital multimeter with mA loop calibrator + IR3000 FC connector + 4-20mA DC current clamp kpn: 789FC-MA/KIT kpn_dash: 789FC kpn_clear: 789FCMAKIT bkpn: FLUKE 789FC-MA/KIT bkpn_clear: FLUKE 789FCMAKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4722828 sr_ns: FLUKE4722828
r: 02951853 p: 2094.385 pid: 71174 b: FLUKE q: 0 st: lt: 8 ean: 0095969111072 sr: FLUKE 1630430 sr_no_br: 1630430 sr_no_br_cl: 1630430 sr_cl: FLUKE1630430 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 100G pressure calibrator -850 mbar to 7 bar (-12 to 100 psi) - 1630430 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrator delivers excellent performance and is extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. Easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. Protected against electromagnetic interference, dust and splash water and equipped with a removable battery cover, which allows quick battery replacement. This type of calibrator is available in 9 models and measures pressures up to 345 bar/5000 psi (for the measurement range of this particular item, see "Scope of delivery" above). They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features Measures pressure, 0.05% of full scale with internal pressure sensor to bar/psi value listed at "Scope of delivery" above Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: Scope of delivery Pressure calibrator -850 mbar to 7 bar (-85 to 689.48 kPa; -12 to 100 psi) Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: pressure calibrator -850 mbar to 7 bar (-12 to 100 psi) kpn: 717 100G kpn_dash: kpn_clear: 717100G bkpn: FLUKE 717 100G bkpn_clear: FLUKE 717100G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 1630430 sr_ns: FLUKE1630430
r: 02951901 p: 2078.021 pid: 73397 b: FLUKE q: 0 st: lt: 8 ean: 0095969327701 sr: FLUKE 2547203 sr_no_br: 2547203 sr_no_br_cl: 2547203 sr_cl: FLUKE2547203 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 1500G pressure calibrator (103.4 bar) - 2547203 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (103.4 bar) kpn: 717 1500G kpn_dash: kpn_clear: 7171500G bkpn: FLUKE 717 1500G bkpn_clear: FLUKE 7171500G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547203 sr_ns: FLUKE2547203
