r: 02952186 p: 2896.859 pid: 71442 b: FLUKE q: 0 st: lt: 8 ean: 0095969673716 sr: FLUKE 4352691 sr_no_br: 4352691 sr_no_br_cl: 4352691 sr_cl: FLUKE4352691 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R31 pressure module (0 - 700 bar) - 4352691 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 10000 psi (0 to 700 bar), (0 to 70 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 700 bar) kpn: 750R31 kpn_dash: kpn_clear: 750R31 bkpn: FLUKE 750R31 bkpn_clear: FLUKE 750R31 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352691 sr_ns: FLUKE4352691
r: 02952184 p: 2896.859 pid: 72112 b: FLUKE q: 0 st: lt: 8 ean: 0095969673693 sr: FLUKE 4352678 sr_no_br: 4352678 sr_no_br_cl: 4352678 sr_cl: FLUKE4352678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R29 pressure module (0 - 200 bar) - 4352678 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 3000 psi (0 to 200 bar), (0 to 20 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 200 bar) kpn: 750R29 kpn_dash: kpn_clear: 750R29 bkpn: FLUKE 750R29 bkpn_clear: FLUKE 750R29 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352678 sr_ns: FLUKE4352678
r: 02958266 p: 2855.33 pid: 72919 b: FLUKE q: 0 st: lt: 8 ean: 0095969344272 sr: FLUKE 2577159 sr_no_br: 2577159 sr_no_br_cl: 2577159 sr_cl: FLUKE2577159 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Accessory/Part type Transformer n: FLUKE EI-162BN split-coret transformer 320mm - 2577159 cn: ACCESSORIES/PART MEASURING TOOL cn2: ACCESSORIES/PART MEASURING TOOL cn_clear: ACCESSORIESPARTMEASURINGTOOL d: Product description: Used as a current clamp for selective earth loop resistance measurements around high-voltage pylons. Inside diameter of the current clamp is 320 mm (12.6 inches). Split-coret transformer included. This split-core transformer can be used in combination with set 1625 or set 1623. In case of an instrument that is not part of a set, the GEOX pro cord must be purchased separately. Key features External dimensions (L x W x H): 46 x 36 x 16 cm (20.5 x 16 x 17.2 inches) Weight: 8 kg (17.6 lbs) ds: dsc: kts: split-coret transformer 320mm kpn: EI-162BN kpn_dash: EI kpn_clear: EI162BN bkpn: FLUKE EI-162BN bkpn_clear: FLUKE EI162BN c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part measuring tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part measuring tool sr_no_br_cl_ns: 2577159 sr_ns: FLUKE2577159
r: 08107131 p: 2822.644 pid: 166252 b: FLUKE q: 0 st: lt: 8 ean: 0095969865210 sr: FLUKE 4961163 sr_no_br: 4961163 sr_no_br_cl: 4961163 sr_cl: FLUKE4961163 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 4961163 smart 2x infrared telelens cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description See your measurement object magnified 2 times more than with a standard lens and reduce the need to enter the danger zone in your facility or climb a high ladder to capture the critical infrared details that may indicate there is a problem with your equipment. Avoid the hassle of sending your camera to be calibrated along with the lens - with smart lenses, you can simply attach the lens to any suitable camera and capture images immediately. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Compatible with RSE300 and RSE600 ds: dsc: kts: smart 2x infrared telelens kpn: 4961163 kpn_dash: kpn_clear: 4961163 bkpn: FLUKE 4961163 bkpn_clear: FLUKE 4961163 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4961163 sr_ns: FLUKE4961163
r: 03327879 p: 2789.728 pid: 166129 b: FLUKE q: 0 st: lt: 10 ean: 0195112122020 sr: FLUKE 5590693 sr_no_br: 5590693 sr_no_br_cl: 5590693 sr_cl: FLUKE5590693 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2 PRO EV charging station analyser for type 2 with TruTest software in bag - 5590693 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) earth test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA earth leakage switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case TruTest software licence kts: EV charging station analyser for type 2 with TruTest software in bag kpn: FEV350/TY2 PRO kpn_dash: kpn_clear: FEV350TY2PRO bkpn: FLUKE FEV350/TY2 PRO bkpn_clear: FLUKE FEV350TY2PRO c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5590693 sr_ns: FLUKE5590693
r: 03327869 p: 2783.535 pid: 166141 b: FLUKE q: 0 st: lt: 10 ean: 0195112042984 sr: FLUKE 5348072 sr_no_br: 5348072 sr_no_br_cl: 5348072 sr_cl: FLUKE5348072 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2/TY1 EV charging station analyser for type 1 and 2 connectors in bag - 5348072 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case kts: EV charging station analyser for type 1 and 2 connectors in bag kpn: FEV350/TY2/TY1 kpn_dash: kpn_clear: FEV350TY2TY1 bkpn: FLUKE FEV350/TY2/TY1 bkpn_clear: FLUKE FEV350TY2TY1 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5348072 sr_ns: FLUKE5348072
r: 02952106 p: 2749.421 pid: 71413 b: FLUKE q: 0 st: lt: 8 ean: 0095969673426 sr: FLUKE 4352403 sr_no_br: 4352403 sr_no_br_cl: 4352403 sr_cl: FLUKE4352403 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P29 pressure module (0 - 200 bar) - 4352403 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 3000 psi (0 to 200 bar), (0 to 20 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 200 bar) kpn: 750P29 kpn_dash: kpn_clear: 750P29 bkpn: FLUKE 750P29 bkpn_clear: FLUKE 750P29 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352403 sr_ns: FLUKE4352403
r: 03392939 p: 2742.507 pid: 178070 b: FLUKE q: 0 st: lt: 8 ean: 0195112148860 sr: FLUKE 6093290 sr_no_br: 6093290 sr_no_br_cl: 6093290 sr_cl: FLUKE6093290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093290 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1673 FC multifunction installation tester will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. Key features Field-updatable - you can apply rule changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Crocodile clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1673 FC SCH/FEV300 kpn_dash: kpn_clear: 1673FCSCHFEV300 bkpn: FLUKE 1673 FC SCH/FEV300 bkpn_clear: FLUKE 1673FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093290 sr_ns: FLUKE6093290
r: 02952068 p: 2541.28 pid: 72725 b: FLUKE q: 0 st: lt: 8 ean: 0095969673297 sr: FLUKE 4352270 sr_no_br: 4352270 sr_no_br_cl: 4352270 sr_cl: FLUKE4352270 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P00 pressure module (0 - 2.5 mbar) - 4352270 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 to 1 in H2O (0 to 2.5 mbar), (0 to 0.25 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adaptor from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 2.5 mbar) kpn: 750P00 kpn_dash: kpn_clear: 750P00 bkpn: FLUKE 750P00 bkpn_clear: FLUKE 750P00 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352270 sr_ns: FLUKE4352270
r: 03317202 p: 2526.834 pid: 73205 b: FLUKE q: 0 st: lt: 8 ean: 0195112122433 sr: FLUKE 5592405 sr_no_br: 5592405 sr_no_br_cl: 5592405 sr_cl: FLUKE5592405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1537 advanced insulation resistance tester and megohmmeters - 5592405 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description User-selectable voltages from 250 V - 2500 V Measurement of insulation resistance up to 500 GOhm Short-circuit current up to 5 mA for fast, stable measurements Automatically calculate PI and DAR Perform 1300+ insulation tests on one set of batteries Fast, accurate and reliable insulation tests in a lightweight, portable package The Fluke 1535 and 1537 2500 V insulation resistance testers are designed to simplify first-line troubleshooting, whether you are on the factory floor or working on site at a solar installation. With these testers, where the user can select test voltages from 250 V to 2,500 V and with resistance measurements up to 500 GOhm, you can do more work with a single instrument. Featuring an intuitive user interface, a short-circuit current of up to 5 mA and a CAT IV specification of 600 V, these portable high-voltage insulation testers can make fast and stable resistance measurements wherever you take them. The 1537 Insulation Resistance Tester also allows you to save measurements for later review or transfer via PC using the supplied software. Selectable voltage tests: Customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar energy applications. Comprehensive insulation resistance measurement: Achieve insulation resistance measurements up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: Perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. Dielectric discharge rate calculation: Automatically calculate the dielectric discharge rate (DD, Discharge Rate) to help identify problems with inaccessible insulation. Slope test mode: Linearly increase the applied test voltage by 100 V/s to identify potentially hard-to-identify faults. Visual and audible continuity indicator:Check continuity visually on the screen or with the audible indicator, so you can concentrate on your testing procedure without looking at the display. Customisable test parameters:Set user-defined labels, adjust test duration and save measurement results for a customised testing experience. Effortless data management:Download and manage data effortlessly with the included PC software.<liComprehensive warranty:Enjoy peace of mind with an extended 3-year warranty. ds: dsc: Scope of delivery Fluke 1537 insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case USB cable) PC software (downloadable from Fluke website) kts: advanced insulation resistance tester and megohmmeters kpn: 1537 kpn_dash: kpn_clear: 1537 bkpn: FLUKE 1537 bkpn_clear: FLUKE 1537 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 5592405 sr_ns: FLUKE5592405
r: 03343207 p: 2516.185 pid: 166148 b: FLUKE q: 0 st: lt: 10 ean: 0195112119624 sr: FLUKE 5581079 sr_no_br: 5581079 sr_no_br_cl: 5581079 sr_cl: FLUKE5581079 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH FTT multifunctional installation tester with TruTest software bundle in case - 5581079 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1673 FC multifunction installation tester with the TruTest software bundle will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software bundle in case kpn: 1673 FC SCH FTT kpn_dash: kpn_clear: 1673FCSCHFTT bkpn: FLUKE 1673 FC SCH FTT bkpn_clear: FLUKE 1673FCSCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581079 sr_ns: FLUKE5581079
r: 03327872 p: 2489.981 pid: 166119 b: FLUKE q: 0 st: lt: 10 ean: 0195112043004 sr: FLUKE 5348097 sr_no_br: 5348097 sr_no_br_cl: 5348097 sr_cl: FLUKE5348097 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2 EV charging station analyser for type 2 connectors in bag - 5348097 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) earth test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA earth leakage switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case kts: EV charging station analyser for type 2 connectors in bag kpn: FEV350/TY2 kpn_dash: kpn_clear: FEV350TY2 bkpn: FLUKE FEV350/TY2 bkpn_clear: FLUKE FEV350TY2 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5348097 sr_ns: FLUKE5348097
r: 08106988 p: 2413.953 pid: 158984 b: FLUKE q: 0 st: lt: 10 ean: 0195112013564 sr: FLUKE 5255306 sr_no_br: 5255306 sr_no_br_cl: 5255306 sr_cl: FLUKE5255306 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Alignment tool type Belt alignment tool Measuring range 10 m n: FLUKE 835 belt alignment device with green laser in case (4x AAA batteries) - 5255306 cn: ALIGNMENT TOOL cn2: ALIGNMENT TOOL cn_clear: ALIGNMENTTOOL d: Product description Specially designed for belt alignment work as it is easy to use and requires only one operator. The strong magnets on the two units attach to virtually any belt surface, making it the ideal partner for most belt alignment jobs. It uses the proven OPTALIGN reflected beam principle for maximum angular resolution to generate accurate and reliable measurements. The time-saving method requires no cross-checking and shows offset, vertical and horizontal angle simultaneously. With four AAA batteries, the Fluke 835 offers 6 hours of continuous use. Corrections are quickly made live; true alignment is achieved when the transmitted laser line and the corresponding reflected laser line harmonise with the respective reference line. Advantages Fast, easy, full belt alignment - no training required Efficient operation by one person Reflected laser technology doubles the distance, improving accuracy Light, robust and sturdy: A small tool in your bag to take with you wherever you go No small parts to lose Strong magnets attach to any size of belt or gear ds: dsc: Scope of delivery 835 laser unit (green laser) 835 reflector unit 4 batteries (AAA) Fabric pouch Safety information Quick guide kts: belt alignment device with green laser in case (4x AAA batteries) kpn: 835 kpn_dash: kpn_clear: 835 bkpn: FLUKE 835 bkpn_clear: FLUKE 835 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Alignment tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke alignment tool sr_no_br_cl_ns: 5255306 sr_ns: FLUKE5255306
r: 03215832 p: 2315.661 pid: 73764 b: FLUKE q: 0 st: lt: 8 ean: 0095969865807 sr: FLUKE 4962760 sr_no_br: 4962760 sr_no_br_cl: 4962760 sr_cl: FLUKE4962760 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 20 m n: FLUKE 4962760 9 mm scope with 20 m video scope probe with reel cn: TEST PROBE SET cn2: TEST PROBE SET cn_clear: TESTPROBESET d: ds: dsc: kts: 9 mm scope with 20 m video scope probe with reel kpn: 4962760 kpn_dash: kpn_clear: 4962760 bkpn: FLUKE 4962760 bkpn_clear: FLUKE 4962760 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test probe set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test probe set sr_no_br_cl_ns: 4962760 sr_ns: FLUKE4962760
r: 08107019 p: 2308.54 pid: 73487 b: FLUKE q: 0 st: lt: 8 ean: 0095969784368 sr: FLUKE 4623314 sr_no_br: 4623314 sr_no_br_cl: 4623314 sr_cl: FLUKE4623314 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700HTPK2 hydraulic premium test pressure kit - 4623314 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product description Robust, high-quality premium hydraulic pressure pump set for fast and accurate test results, generates pressure up to 10,000 psi, 690 bar. Includes hydraulic hand pump 700HTP-2, premium test hoses and protective case. Combine with all Fluke Series 700G pressure gauges, range 1000 psi (69 bar) or more, for a complete pressure test kit Generate pressure up to 10,000 psi, 690 bar with the included test pump 700HTP-2 Connect 700G series pressure gauge to hand pump HTP-2 with premium adapter, no tools required Includes premium test hose set for transmitters 700TTH 10K and adapters, for connection to the pressure device under test Sturdy case protects pump and pressure gauge allowing the pressure gauge to remain connected to the pump ds: dsc: Scope of delivery 700HTPK-2 hydraulic hand pump Premium, tool-free meter connection A premium transmitter test hose kit and adapters Case kts: hydraulic premium test pressure kit kpn: 700HTPK2 kpn_dash: kpn_clear: 700HTPK2 bkpn: FLUKE 700HTPK2 bkpn_clear: FLUKE 700HTPK2 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 4623314 sr_ns: FLUKE4623314
