r: 02953740 p: 3760.743 pid: 71282 b: FLUKE q: 0 st: lt: 10 ean: 0095969666862 sr: FLUKE 4325170 sr_no_br: 4325170 sr_no_br_cl: 4325170 sr_cl: FLUKE4325170 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1623-2 KIT GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) - 4325170 cn: EARTH RESISTANCE TESTER cn2: EARTH RESISTANCE TESTER cn_clear: EARTHRESISTANCETESTER d: Product description: The Fluke 1623-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure easy and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1623-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1623-2 is a unique earth ground tester that can take earth ground measurements in all four ways. 3- and 4-pole potential loss measurement (using electrodes) 4-pole ground resistance test (using electrodes) Selective test (using 1 current clamp and electrodes) Electrode-less test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide USB cable 2 current clamps C1620 professional carrying case 4 earth electrodes 3 wire reels kts: GEO earth diffusion resistance kit (incl. earth stake/cable, current clamp) kpn: 1623-2 KIT kpn_dash: 1623 kpn_clear: 16232KIT bkpn: FLUKE 1623-2 KIT bkpn_clear: FLUKE 16232KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth resistance tester sr_no_br_cl_ns: 4325170 sr_ns: FLUKE4325170
r: 02953739 p: 3679.297 pid: 73486 b: FLUKE q: 0 st: lt: 10 ean: 0095969666855 sr: FLUKE 4325162 sr_no_br: 4325162 sr_no_br_cl: 4325162 sr_cl: FLUKE4325162 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1625-2 GEO earth dispersion resistance meter - 4325162 cn: EARTH RESISTANCE TESTER cn2: EARTH RESISTANCE TESTER cn_clear: EARTHRESISTANCETESTER d: Product description: The Fluke 1625-2 GEO ground tester offers the ability to store and download data via the USB port. Top-class accessories ensure simple and fast measurement procedures. 3- and 4-pole potential loss and earth resistance measurements 4-pole ground resistance measurement Selective earth pin measurement with 1 current clamp Selective earth pin measurement with 2 current clamps IP56 classified for outdoor use Sturdy carrying case Data storage and transfer via USB The tester is also easy to use. For each measurement, the tester indicates which electrodes or current clamps should be connected. The large rotary switch can be used even when wearing gloves. Key features Electrode-less measurement The Fluke 1625-2 earth ground tester can measure loop resistances in grounding systems using only current clamps. In this testing method, two current clamps are placed around the earth pin and each current clamp is connected to the tester. No earth electrodes are used. One current clamp induces a known, fixed voltage and the current is then measured by the other current clamp. The tester then automatically determines the resistance of the earth pin. This measurement method only works if a connected earthing system is present for the building or structure being tested, but this is usually the case. If there is only one earth connection, as is the case in many homes, the electrodeless method does not provide an acceptable value and the potential loss test method should be used. An electrodeless measurement does not require the earthing pin to be disconnected. As a result, the connected earthing system remains intact during measurement. The time-consuming placing and connecting of electrodes for each earth pin on the system is a thing of the past; a significant time saver. You can also perform earthing tests in places that were previously out of the question, namely inside buildings, in high-voltage pylons and anywhere you do not have access to the ground. The most complete tester The Fluke 1625-2 is a unique earth ground tester that can take earth ground measurements in all four ways: 3- and 4-pole potential loss measurement (using electrodes) 4-pole soil resistance test (using electrodes) Selective test (to be performed using 1 current clamp and earth pins) Electrodeless test (using only 2 current clamps) ds: dsc: Scope of delivery GEO earthing tester User manual Batteries Quick guide USB cable kts: GEO earth dispersion resistance meter kpn: 1625-2 kpn_dash: 1625 kpn_clear: 16252 bkpn: FLUKE 1625-2 bkpn_clear: FLUKE 16252 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Earth resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke earth resistance tester sr_no_br_cl_ns: 4325162 sr_ns: FLUKE4325162
r: 02951906 p: 3640.294 pid: 73402 b: FLUKE q: 0 st: lt: 8 ean: 0095969062084 sr: FLUKE 665075 sr_no_br: 665075 sr_no_br_cl: 665075 sr_cl: FLUKE665075 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718 30US pressure calibrator (2 bar) - 665075 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The complete solution for pressure calibration The Fluke 718 series of pressure calibrators offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. This unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features Generates and measures pressure and milliamps for calibration and maintenance of almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges mean fewer additional instruments needed ds: dsc: Scope of delivery Pressure calibrator -850 mbar to 2 bar (-85 to 206.84 kPa; -12 to 30 psi) Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) Measurement leads and alligator clips Two 9-V alkaline batteries NIST - traceable calibration report and data kts: pressure calibrator (2 bar) kpn: 718 30US kpn_dash: kpn_clear: 71830US bkpn: FLUKE 718 30US bkpn_clear: FLUKE 71830US c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 665075 sr_ns: FLUKE665075
r: 02951909 p: 3640.294 pid: 71379 b: FLUKE q: 0 st: lt: 8 ean: 0095969062091 sr: FLUKE 665080 sr_no_br: 665080 sr_no_br_cl: 665080 sr_cl: FLUKE665080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718 100US pressure calibrator (7 bar) - 665080 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The complete solution for pressure calibration The Fluke 718 series of pressure calibrators offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. This unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features Generates and measures pressure and milliamps for calibration and maintenance of almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges mean fewer additional instruments needed ds: dsc: Scope of delivery Pressure calibrator -850 mbar to 7 bar (-85 to 689.48 kPa; -12 to 100 psi) Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) Test leads and alligator clips Two 9-V alkaline batteries NIST - traceable calibration report and data kts: pressure calibrator (7 bar) kpn: 718 100US kpn_dash: kpn_clear: 718100US bkpn: FLUKE 718 100US bkpn_clear: FLUKE 718100US c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 665080 sr_ns: FLUKE665080
r: 02951458 p: 3563.363 pid: 72623 b: FLUKE q: 0 st: lt: 10 ean: 0095969815048 sr: FLUKE 4755975 sr_no_br: 4755975 sr_no_br_cl: 4755975 sr_cl: FLUKE4755975 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4755975 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 124B/EU/S kpn_dash: kpn_clear: 124BEUS bkpn: FLUKE 124B/EU/S bkpn_clear: FLUKE 124BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755975 sr_ns: FLUKE4755975
r: 08107144 p: 3558.347 pid: 74236 b: FLUKE q: 0 st: lt: 8 ean: 0195112035009 sr: FLUKE 5315182 sr_no_br: 5315182 sr_no_br_cl: 5315182 sr_cl: FLUKE5315182 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-ADV-M10 software licence code for TruTest Advanced (10 workstations) - 5315182 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 10 workstations The ability to assign an unlimited number of users to each of the 10 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Advanced (10 workstations) kpn: TRUTEST-ADV-M10 kpn_dash: TRUTEST kpn_clear: TRUTESTADVM10 bkpn: FLUKE TRUTEST-ADV-M10 bkpn_clear: FLUKE TRUTESTADVM10 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315182 sr_ns: FLUKE5315182
r: 02951971 p: 3512.915 pid: 71205 b: FLUKE q: 0 st: lt: 8 ean: 0095969673945 sr: FLUKE 4353366 sr_no_br: 4353366 sr_no_br_cl: 4353366 sr_cl: FLUKE4353366 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1610 pressure calibrator with two sensors, 1.1 bar, 69 bar - 4353366 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 1000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 69 bar kpn: 721-1610 kpn_dash: 721 kpn_clear: 7211610 bkpn: FLUKE 721-1610 bkpn_clear: FLUKE 7211610 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353366 sr_ns: FLUKE4353366
r: 02951973 p: 3512.915 pid: 72073 b: FLUKE q: 0 st: lt: 8 ean: 0095969673983 sr: FLUKE 4353401 sr_no_br: 4353401 sr_no_br_cl: 4353401 sr_cl: FLUKE4353401 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1615 pressure calibrator with two sensors, 1.1 bar, 103 bar - 4353401 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 1500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 103 bar kpn: 721-1615 kpn_dash: 721 kpn_clear: 7211615 bkpn: FLUKE 721-1615 bkpn_clear: FLUKE 7211615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353401 sr_ns: FLUKE4353401
r: 02951989 p: 3512.915 pid: 71390 b: FLUKE q: 0 st: lt: 8 ean: 0095969673990 sr: FLUKE 4353412 sr_no_br: 4353412 sr_no_br_cl: 4353412 sr_cl: FLUKE4353412 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3615 pressure calibrator with two sensors, 2.48 bar, 103 bar - 4353412 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 1500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 103 bar kpn: 721-3615 kpn_dash: 721 kpn_clear: 7213615 bkpn: FLUKE 721-3615 bkpn_clear: FLUKE 7213615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353412 sr_ns: FLUKE4353412
r: 02951963 p: 3512.915 pid: 71202 b: FLUKE q: 0 st: lt: 8 ean: 0095969673822 sr: FLUKE 4353241 sr_no_br: 4353241 sr_no_br_cl: 4353241 sr_cl: FLUKE4353241 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1601 pressure calibrator with two sensors, 1.1 bar, 6.9 bar - 4353241 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 100 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 6.9 bar kpn: 721-1601 kpn_dash: 721 kpn_clear: 7211601 bkpn: FLUKE 721-1601 bkpn_clear: FLUKE 7211601 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353241 sr_ns: FLUKE4353241
r: 02951968 p: 3512.915 pid: 72706 b: FLUKE q: 0 st: lt: 8 ean: 0095969673907 sr: FLUKE 4353327 sr_no_br: 4353327 sr_no_br_cl: 4353327 sr_cl: FLUKE4353327 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1605 pressure calibrator with two sensors, 1.1 bar, 34 bar - 4353327 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 34 bar kpn: 721-1605 kpn_dash: 721 kpn_clear: 7211605 bkpn: FLUKE 721-1605 bkpn_clear: FLUKE 7211605 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353327 sr_ns: FLUKE4353327
r: 02951974 p: 3512.915 pid: 72076 b: FLUKE q: 0 st: lt: 8 ean: 0095969674027 sr: FLUKE 4353447 sr_no_br: 4353447 sr_no_br_cl: 4353447 sr_cl: FLUKE4353447 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1630 pressure calibrator with two sensors, 1.1 bar, 200 bar - 4353447 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 3000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 200 bar kpn: 721-1630 kpn_dash: 721 kpn_clear: 7211630 bkpn: FLUKE 721-1630 bkpn_clear: FLUKE 7211630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353447 sr_ns: FLUKE4353447
r: 02951967 p: 3512.915 pid: 72070 b: FLUKE q: 0 st: lt: 8 ean: 0095969673860 sr: FLUKE 4353283 sr_no_br: 4353283 sr_no_br_cl: 4353283 sr_cl: FLUKE4353283 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1603 pressure calibrator with two sensors, 1.1 bar, 20 bar - 4353283 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 300 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 20 bar kpn: 721-1603 kpn_dash: 721 kpn_clear: 7211603 bkpn: FLUKE 721-1603 bkpn_clear: FLUKE 7211603 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353283 sr_ns: FLUKE4353283
r: 02951991 p: 3512.915 pid: 71393 b: FLUKE q: 0 st: lt: 8 ean: 0095969674034 sr: FLUKE 4353458 sr_no_br: 4353458 sr_no_br_cl: 4353458 sr_cl: FLUKE4353458 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3630 pressure calibrator with two sensors, 2.48 bar, 200 bar - 4353458 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 3000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 200 bar kpn: 721-3630 kpn_dash: 721 kpn_clear: 7213630 bkpn: FLUKE 721-3630 bkpn_clear: FLUKE 7213630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353458 sr_ns: FLUKE4353458
r: 02951987 p: 3512.915 pid: 72080 b: FLUKE q: 0 st: lt: 8 ean: 0095969673914 sr: FLUKE 4353330 sr_no_br: 4353330 sr_no_br_cl: 4353330 sr_cl: FLUKE4353330 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3605 pressure calibrator with two sensors, 2.48 bar, 34 bar - 4353330 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 34 bar kpn: 721-3605 kpn_dash: 721 kpn_clear: 7213605 bkpn: FLUKE 721-3605 bkpn_clear: FLUKE 7213605 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353330 sr_ns: FLUKE4353330
r: 03327873 p: 3507.502 pid: 166128 b: FLUKE q: 0 st: lt: 10 ean: 0195112125113 sr: FLUKE 5602648 sr_no_br: 5602648 sr_no_br_cl: 5602648 sr_cl: FLUKE5602648 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/KIT SCH EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag - 5602648 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case 1664 FC Multifunctional tester kts: EV charging station analyser for type 1 and 2 connectors + 1664 multimeter in bag kpn: FEV350/KIT SCH kpn_dash: kpn_clear: FEV350KITSCH bkpn: FLUKE FEV350/KIT SCH bkpn_clear: FLUKE FEV350KITSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5602648 sr_ns: FLUKE5602648
r: 02952218 p: 3499.132 pid: 71255 b: FLUKE q: 0 st: lt: 8 ean: 0095969769389 sr: FLUKE 4558716 sr_no_br: 4558716 sr_no_br_cl: 4558716 sr_cl: FLUKE4558716 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA4EX pressure module (0 - 1 bar) - 4558716 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Product description: A complete range of pressure modules An assortment of 48 pressure modules can perform pressure calibrations from 0 to 1 inH20 to 10,000 psi (2.5 mBar to 690 bar). Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high-fitting versus the low-fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. Choice of: Differential pressure modules Overpressure modules High-pressure modules Absolute pressure modules Vacuum modules Modules with two measuring ranges Reference modules Key features: Precision pressure measurement for 75X and 720 series calibrators The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and with the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measuring models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum ds: dsc: kts: pressure module (0 - 1 bar) kpn: 750PA4EX kpn_dash: kpn_clear: 750PA4EX bkpn: FLUKE 750PA4EX bkpn_clear: FLUKE 750PA4EX c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4558716 sr_ns: FLUKE4558716
r: 03392951 p: 3459.325 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02951993 p: 3404.031 pid: 72710 b: FLUKE q: 0 st: lt: 8 ean: 0095969674072 sr: FLUKE 4353499 sr_no_br: 4353499 sr_no_br_cl: 4353499 sr_cl: FLUKE4353499 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3650 pressure calibrator with two sensors, 2.48 bar, 345 bar - 4353499 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 5000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 345 bar kpn: 721-3650 kpn_dash: 721 kpn_clear: 7213650 bkpn: FLUKE 721-3650 bkpn_clear: FLUKE 7213650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353499 sr_ns: FLUKE4353499
r: 02951980 p: 3404.031 pid: 71209 b: FLUKE q: 0 st: lt: 8 ean: 0095969674065 sr: FLUKE 4353486 sr_no_br: 4353486 sr_no_br_cl: 4353486 sr_cl: FLUKE4353486 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1650 pressure calibrator with two sensors, 1.1 bar, 345 bar - 4353486 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 5000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 345 bar kpn: 721-1650 kpn_dash: 721 kpn_clear: 7211650 bkpn: FLUKE 721-1650 bkpn_clear: FLUKE 7211650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353486 sr_ns: FLUKE4353486
