r: 02952020 p: 4668.99 pid: 72082 b: FLUKE q: 0 st: lt: 8 ean: 0095969673884 sr: FLUKE 4353309 sr_no_br: 4353309 sr_no_br_cl: 4353309 sr_cl: FLUKE4353309 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-1603 pressure calibrator with two sensors, 16, 300 PSIG - 4353309 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 16, 300 PSIG kpn: 721EX-1603 kpn_dash: 721EX kpn_clear: 721EX1603 bkpn: FLUKE 721EX-1603 bkpn_clear: FLUKE 721EX1603 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353309 sr_ns: FLUKE4353309
r: 02952027 p: 4668.99 pid: 71397 b: FLUKE q: 0 st: lt: 8 ean: 0095969674041 sr: FLUKE 4353464 sr_no_br: 4353464 sr_no_br_cl: 4353464 sr_cl: FLUKE4353464 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-1630 pressure calibrator with two sensors, 16, 3000 PSIG - 4353464 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 16, 3000 PSIG kpn: 721EX-1630 kpn_dash: 721EX kpn_clear: 721EX1630 bkpn: FLUKE 721EX-1630 bkpn_clear: FLUKE 721EX1630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353464 sr_ns: FLUKE4353464
r: 02952049 p: 4668.99 pid: 72084 b: FLUKE q: 0 st: lt: 8 ean: 0095969674096 sr: FLUKE 4353514 sr_no_br: 4353514 sr_no_br_cl: 4353514 sr_cl: FLUKE4353514 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-3650 pressure calibrator with two sensors, 36, 5000 PSIG - 4353514 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 36, 5000 PSIG kpn: 721EX-3650 kpn_dash: 721EX kpn_clear: 721EX3650 bkpn: FLUKE 721EX-3650 bkpn_clear: FLUKE 721EX3650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353514 sr_ns: FLUKE4353514
r: 02952048 p: 4668.99 pid: 71400 b: FLUKE q: 0 st: lt: 8 ean: 0095969674058 sr: FLUKE 4353473 sr_no_br: 4353473 sr_no_br_cl: 4353473 sr_cl: FLUKE4353473 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-3630 pressure calibrator with two sensors, 36, 3000 PSIG - 4353473 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 36, 3000 PSIG kpn: 721EX-3630 kpn_dash: 721EX kpn_clear: 721EX3630 bkpn: FLUKE 721EX-3630 bkpn_clear: FLUKE 721EX3630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353473 sr_ns: FLUKE4353473
r: 03343214 p: 4634.532 pid: 166135 b: FLUKE q: 0 st: lt: 10 ean: 0195112119808 sr: FLUKE 5581251 sr_no_br: 5581251 sr_no_br_cl: 5581251 sr_cl: FLUKE5581251 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/1630 multifunctional installation tester with earth resistance tester in case - 5581251 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1674 FC multifunction installation tester with the Fluke 1630-2 FC current clamp ground tester package will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge arrestor testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1674 FC series of installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications while connecting wirelessly to the 1630-2 FC, allowing you to safely and efficiently measure and store earth resistances without having to disconnect parallel earths or use auxiliary test pins. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with complete confidence in the data you are collecting. The Fluke 1670 Series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and a high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery 1630-2 FC earth resistance tester kts: multifunctional installation tester with earth resistance tester in case kpn: 1674 FC SCH/1630 kpn_dash: kpn_clear: 1674FCSCH1630 bkpn: FLUKE 1674 FC SCH/1630 bkpn_clear: FLUKE 1674FCSCH1630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581251 sr_ns: FLUKE5581251
r: 02952047 p: 4524.196 pid: 72717 b: FLUKE q: 0 st: lt: 8 ean: 0095969674010 sr: FLUKE 4353435 sr_no_br: 4353435 sr_no_br_cl: 4353435 sr_cl: FLUKE4353435 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-3615 pressure calibrator with two sensors, 36, 1500 PSIG - 4353435 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 36, 1500 PSIG kpn: 721EX-3615 kpn_dash: 721EX kpn_clear: 721EX3615 bkpn: FLUKE 721EX-3615 bkpn_clear: FLUKE 721EX3615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353435 sr_ns: FLUKE4353435
r: 02951950 p: 4443.985 pid: 71194 b: FLUKE q: 0 st: lt: 8 ean: 0095969673808 sr: FLUKE 4353229 sr_no_br: 4353229 sr_no_br_cl: 4353229 sr_cl: FLUKE4353229 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 719 PRO 150G electric pressure calibrator - 4353229 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The 719Pro includes a fully functional loop calibrator that generates, simulates and measures mA signals and more, making it the ideal measurement tool for calibrating high-precision transmitters, pressure switches and pressure gauges. Have the ultimate measurement flexibility with a large backlit screen displaying three parameters simultaneously: Pressure measurement from internal or external sensor Generated/simulated or measured mA values Temperature measured by optional RTD thermocouple Key features Unique integrated electric pump for one-handed pressure calibration Easily test pressure switches using switch test function Fine regulator for precise pressure adjustment for easy and accurate pressure calibration Highly accurate, high performance (0.025 %) for calibration of reference pressure transmitters Pressure ranges of 30 PSI, 150 PSI and 300 PSI Programmable pump limit pressure calibrator: Prevents overpressure Allows user to set desired pressure values for pumping Expansion of pressure measuring range using any of the 29 750P pressure modules Pump cleaning vents reduce pump failures caused by moisture and liquids Unit is equipped with a moisture separator to reduce the likelihood of liquid damage in high-risk applications Accurate temperature measurements with optional RTD thermocouple ds: dsc: Scope of delivery Electrical pressure calibrator, 150 PSIG Test leads with alligator clips Printed version of user manual and user manual on CD-ROM in 14 languages Moisture separator Carrying case 1/4 inch NPT to 1/4 inch ISO adapter Accessory and hose set with (2) 1/8 inch quick-fit adapters and 1 metre hose Traceable calibration certificate kts: electric pressure calibrator kpn: 719 PRO 150G kpn_dash: kpn_clear: 719PRO150G bkpn: FLUKE 719 PRO 150G bkpn_clear: FLUKE 719PRO150G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353229 sr_ns: FLUKE4353229
r: 02951940 p: 4443.985 pid: 72697 b: FLUKE q: 0 st: lt: 8 ean: 0095969673792 sr: FLUKE 4353218 sr_no_br: 4353218 sr_no_br_cl: 4353218 sr_cl: FLUKE4353218 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 719 PRO 30G electric pressure calibrator - 4353218 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The 719Pro includes a fully functional loop calibrator that generates, simulates and measures mA signals and more, making it the ideal measurement tool for calibrating high-precision transmitters, pressure switches and pressure gauges. Have the ultimate measurement flexibility with a large backlit screen displaying three parameters simultaneously: Pressure measurement from internal or external sensor Generated/simulated or measured mA values Temperature measured by optional RTD thermocouple Key features Unique integrated electric pump for one-handed pressure calibration Easily test pressure switches using switch test function Fine regulator for precise pressure adjustment for easy and accurate pressure calibration Highly accurate, high performance (0.025 %) for calibration of reference pressure transmitters Pressure ranges of 30 PSI, 150 PSI and 300 PSI Programmable pump limit pressure calibrator: Prevents overpressure Allows user to set desired pressure values for pumping Expansion of pressure measuring range using one of 29 750P pressure modules Pump cleaning vents reduce pump failures caused by moisture and liquids Unit is equipped with a moisture separator to reduce the risk of liquid damage in high-risk applications Accurate temperature measurements with optional RTD thermocouple ds: dsc: Scope of delivery Electrical pressure calibrator, 30 PSIG Test leads with alligator clips Printed version of user manual and user manual on CD-ROM in 14 languages Moisture separator Carrying case 1/4 inch NPT to 1/4 inch ISO adapter Accessory and hose set with (2) 1/8 inch quick-fit adapters and 1 metre hose Traceable calibration certificate kts: electric pressure calibrator kpn: 719 PRO 30G kpn_dash: kpn_clear: 719PRO30G bkpn: FLUKE 719 PRO 30G bkpn_clear: FLUKE 719PRO30G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353218 sr_ns: FLUKE4353218
r: 02951951 p: 4443.985 pid: 73418 b: FLUKE q: 0 st: lt: 8 ean: 0095969673815 sr: FLUKE 4353234 sr_no_br: 4353234 sr_no_br_cl: 4353234 sr_cl: FLUKE4353234 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 719 PRO 300G electric pressure calibrator - 4353234 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The 719Pro includes a fully functional loop calibrator that generates, simulates and measures mA signals and more, making it the ideal measurement tool for calibrating high-precision transmitters, pressure switches and pressure gauges. Have the ultimate measurement flexibility with a large backlit screen displaying three parameters simultaneously: Pressure measurement from internal or external sensor Generated/simulated or measured mA values Temperature measured by optional RTD thermocouple Key features Unique integrated electric pump for one-handed pressure calibration Easily test pressure switches using switch test function Fine regulator for precise pressure adjustment for easy and accurate pressure calibration Highly accurate, high performance (0.025 %) for calibration of reference pressure transmitters Pressure ranges of 30 PSI, 150 PSI and 300 PSI Programmable pump limit pressure calibrator: Prevents overpressure Allows user to set desired pressure values for pumping Expansion of pressure measuring range using one of 29 750P pressure modules Pump cleaning vents reduce pump failures caused by moisture and liquids Unit is equipped with a moisture separator to reduce the risk of liquid damage in high-risk applications Accurate temperature measurements with optional RTD thermocouple ds: dsc: Scope of delivery Electric pressure calibrator, 300 PSIG Test leads with alligator clips Printed version of user manual and user manual on CD-ROM in 14 languages Moisture separator Carrying case 1/4 inch NPT to 1/4 inch ISO adapter Accessory and hose set with (2) 1/8 inch quick-fit adapters and 1 metre hose Traceable calibration certificate kts: electric pressure calibrator kpn: 719 PRO 300G kpn_dash: kpn_clear: 719PRO300G bkpn: FLUKE 719 PRO 300G bkpn_clear: FLUKE 719PRO300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353234 sr_ns: FLUKE4353234
r: 08106912 p: 4274.603 pid: 72092 b: FLUKE q: 0 st: lt: 8 ean: 0095969727242 sr: FLUKE 4489970 sr_no_br: 4489970 sr_no_br_cl: 4489970 sr_cl: FLUKE4489970 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BT510 500 series battery analyser - 4489970 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description The ideal gauge for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Key measurements: Internal battery resistance, direct and alternating voltage, direct and alternating current strength, ripple voltage, frequency and temperature Sequence measurement mode: Automatic or manual sequential testing of battery series with automatic storage of measurements including voltage, resistance and temperature (with intelligent measuring probe BTL21), eliminating the need to press a button each time a measurement needs to be stored Comprehensive recording: All measured values are automatically recorded during measurement and can be viewed on the instrument before downloading for analysis on the go. Reduced measurement complexity, simplified workflow and an intuitive user interface provide a new level of ease of use when measuring batteries. The ideal measurement tool for maintenance, troubleshooting and to measure performance of individual stationary batteries and battery banks used in critical battery back-up applications Intuitive user interface, compact design and robust construction ensure optimal performance, measurement results and reliability Includes a wide range of battery measurement functions, ranging from DC voltage and resistance measurements to full condition measurements using automated sequence function measurements and the infrared temperature measurement system integrated into the measurement probe Designed for measurements on all types of stationary batteries. Threshold values for voltage and resistance Fluke battery analysers allow you to quickly and easily define upper and lower threshold values and tolerance ranges. During the testing process, measured values are automatically compared with the predefined thresholds and you get a PASS (good), FAIL (error) or WARN (warning) after each measurement. Fluke battery management software Fluke battery management software lets you easily and quickly import data from the battery analyser to a PC. The measurement data and battery profile information are stored and archived with the Management Software and can be used to compare results, switch results between conductivity and resistivity values and perform trend analysis. All measurement data, battery profile and analysis information can be used to easily generate reports. Quick display of stored measurement values Profile management Histogram of a battery series with end-user-defined threshold value Historical trend data of batteries Multiple rounds of discharge voltage Quickly generate reports Upgrade firmware of Fluke Battery Analyzer Swap readings between conductance and resistance readings Fluke Battery Analyze mobile app The BT521 offers wireless communication for data download and remote display while measuring via the dedicated Fluke Battery Analyzer mobile app (note: the Fluke BT521 is currently not compatible with Fluke Connect). With the Fluke Battery Analyze mobile app, you can View profiles View Sequence test data Email sequence test data Main features of the Fluke BT510 Battery voltage: While measuring internal resistance, Fluke Battery Analyzers also measure the voltage of the battery under test Discharge voltage: In Discharge mode, during a discharge or load test, the voltage of each battery is measured several times at user-defined intervals. Users can calculate the length of time after which a battery reaches the shutdown voltage and use this time to calculate the battery's capacity loss Ripple voltage measurement: measures unwanted residual AC component of rectified voltage in DC charging and inverter circuits. Allows users to measure AC components in DC charging circuits and find one of the causes of battery deterioration Meter (Meter) and Sequence (Sequence) modes: Meter mode is used for quick measurement or fault finding. In this mode, you can store and read readings in a measurement or time sequence. Sequence mode is intended for maintenance tasks in multiple power supply systems and battery series. Before starting a task, users can configure a profile for the task, to manage data and create reports Threshold and warning: users can configure up to 10 sets of threshold values and receive a good/error/warning indication after each measurement Resistance test mutual cell connections and Data Management: measures the resistance of the mutual cell connection between batteries in a series. AutoHold: When AutoHold is enabled, a reading is captured when it remains stable for 1 second. The reading is released when a new measurement starts AutoSave: When AutoSave is enabled, readings are automatically stored in the product's internal memory after AutoHold Fluke Battery management software: Easily import data from the product to a PC. With the management software, measurement data and battery profile information are stored and archived after which they can be used for comparison and trend analysis. All measurement data and battery profile information and analysis can be used for easy report creation Comprehensive recording: All measured values are automatically captured during recording and can be reviewed on the instrument before downloading for analysis on the go. Optimised user interface: Quick, guided set-up ensures that you always capture the right data Battery life: 7.4V 3000mAh lithium-ion battery for more than eight hours of continuous use. USB port: For fast data download to included data analysis and report management application software. Highest safety specification in the industry: specification CAT III 600V, 1000VDC max for safe measurements around battery power equipment. ds: dsc: Scope of delivery Battery analyser 4-wire measuring pin (set) BTL10, basic measuring lead (set) TL175 TwistGuard measuring leads with adapter BP500 lithium-ion battery BC500 AC charger mini-USB cable Shoulder strap Carrying strap Magnetic suspension strap FlukeView battery management system Soft carrying case Spare fuses (2) Zero-ohm calibration resistor kts: 500 series battery analyser kpn: BT510 kpn_dash: kpn_clear: BT510 bkpn: FLUKE BT510 bkpn_clear: FLUKE BT510 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 4489970 sr_ns: FLUKE4489970
r: 02951908 p: 4265.294 pid: 73405 b: FLUKE q: 0 st: lt: 8 ean: 0095969327640 sr: FLUKE 2547148 sr_no_br: 2547148 sr_no_br_cl: 2547148 sr_cl: FLUKE2547148 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718 1G pressure calibrator (68.9 mbar) - 2547148 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 718 series of pressure calibrators (includes 4 models) offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. The unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features: Generates and measures pressure and milliamps for calibrating and maintaining almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges of 1 and 300 psi mean fewer additional instruments needed Ranges of 1, 30, 100 and 300 psi now available ds: dsc: kts: pressure calibrator (68.9 mbar) kpn: 718 1G kpn_dash: kpn_clear: 7181G bkpn: FLUKE 718 1G bkpn_clear: FLUKE 7181G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547148 sr_ns: FLUKE2547148
r: 08106998 p: 4230.801 pid: 74215 b: FLUKE q: 0 st: lt: 8 ean: 0095969946292 sr: FLUKE 5160037 sr_no_br: 5160037 sr_no_br_cl: 5160037 sr_cl: FLUKE5160037 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TIS75+ 9HZ thermal imaging camera 9HZ - 5160037 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description 384 x 288 infrared resolution Asset tagging IR Fusion touch screen IS3 and AVI video recording Measures up to 550 °C Dew point calculation Be proactive instead of reactive Take your planning for a preventive maintenance (PM) programme and make it a reality. To get started, you need features that make it easy to set up your image organisation and monitoring routines. With the TiS75+, you are well on your way to implementing a successful PM programme. Asset tagging allows you to easily compare images of assets over time. By scanning the QR code on each asset, you create a timeline of your inspections. Use the time savings (25% on average to organise thermal images) to analyse images of assets for trends, diagnose problems and fix them before they lead to failures. Switch to the TiS75+ This new thermal imager from Fluke stays true to our motto of giving customers what they paid for. Fluke's TiS75+ offers features to help you with almost everything you face in the field. IS3 and AVI video recording Data streaming 384 x 288 thermal resolution High temperature - up to 550 °C Dew point calculation ds: dsc: Scope of delivery Thermal imaging camera AC power supply (including universal AC adapters) Smart battery charger with two stations Two robust lithium-ion batteries USB cable 4 GB Micro SD card Sturdy hard carrying case with soft transport bag and adjustable hand strap Free download available: Fluke Connect software and user manual kts: thermal imaging camera 9HZ kpn: TIS75+ 9HZ kpn_dash: kpn_clear: TIS759HZ bkpn: FLUKE TIS75+ 9HZ bkpn_clear: FLUKE TIS759HZ c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5160037 sr_ns: FLUKE5160037
r: 02957554 p: 4207.236 pid: 72161 b: FLUKE q: 0 st: lt: 8 ean: 0095969801980 sr: FLUKE 4706594 sr_no_br: 4706594 sr_no_br_cl: 4706594 sr_cl: FLUKE4706594 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1734/EUS three-phase energy logger with current probes - 4706594 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1734 energy logger Power supply Voltage test cables Crocodile clips (4x) 1500A flexible current clamp of 30.5 cm (3x) Carrying case Energy Analyze Plus software Magnetic suspension strap Magnetic voltage probes (4x) Wifi/BLE adapter Cables Colour coding set Documentation on USB memory kts: three-phase energy logger with current probes kpn: 1734/EUS kpn_dash: kpn_clear: 1734EUS bkpn: FLUKE 1734/EUS bkpn_clear: FLUKE 1734EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706594 sr_ns: FLUKE4706594
r: 08107144 p: 4193.223 pid: 74236 b: FLUKE q: 0 st: lt: 8 ean: 0195112035009 sr: FLUKE 5315182 sr_no_br: 5315182 sr_no_br_cl: 5315182 sr_cl: FLUKE5315182 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-ADV-M10 software licence code for TruTest Advanced (10 workstations) - 5315182 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 10 workstations The ability to assign an unlimited number of users to each of the 10 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Advanced (10 workstations) kpn: TRUTEST-ADV-M10 kpn_dash: TRUTEST kpn_clear: TRUTESTADVM10 bkpn: FLUKE TRUTEST-ADV-M10 bkpn_clear: FLUKE TRUTESTADVM10 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315182 sr_ns: FLUKE5315182
r: 02951911 p: 4114.219 pid: 71382 b: FLUKE q: 0 st: lt: 8 ean: 0095969327657 sr: FLUKE 2547153 sr_no_br: 2547153 sr_no_br_cl: 2547153 sr_cl: FLUKE2547153 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718 300G pressure calibrator(20 bar) - 2547153 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 718 series of pressure calibrators (includes 4 models) offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. The unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features: Generates and measures pressure and milliamps for calibrating and maintaining almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges of 1 and 300 psi mean fewer additional instruments needed Ranges of 1, 30, 100 and 300 psi now available ds: dsc: kts: pressure calibrator(20 bar) kpn: 718 300G kpn_dash: kpn_clear: 718300G bkpn: FLUKE 718 300G bkpn_clear: FLUKE 718300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547153 sr_ns: FLUKE2547153
r: 02952025 p: 4091.304 pid: 72714 b: FLUKE q: 0 st: lt: 8 ean: 0095969674003 sr: FLUKE 4353420 sr_no_br: 4353420 sr_no_br_cl: 4353420 sr_cl: FLUKE4353420 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721EX-1615 pressure calibrator with two sensors, 16, 1500 PSIG - 4353420 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721Ex precision pressure calibrator is the ideal instrument for gas transfer applications in potentially explosive atmospheres. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features: The 721Ex can be configured by selecting a low-pressure sensor of 16 PSI (1.1 bar) or 36 psi (2.48 bar) and then adding one of 7 high-pressure ranges, including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar). Intrinsically safe - IECEx and Atex Ex ia IIB T3 Gb (Zone 1) approved Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Switch test on both pressure inputs Pressure is displayed in the user's choice of 19 pressure units Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: kts: pressure calibrator with two sensors, 16, 1500 PSIG kpn: 721EX-1615 kpn_dash: 721EX kpn_clear: 721EX1615 bkpn: FLUKE 721EX-1615 bkpn_clear: FLUKE 721EX1615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353420 sr_ns: FLUKE4353420
r: 03035927 p: 4072.401 pid: 73698 b: FLUKE q: 0 st: lt: 15 ean: 0095969920841 sr: FLUKE 5133402 sr_no_br: 5133402 sr_no_br_cl: 5133402 sr_cl: FLUKE5133402 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Number of batteries included 2 n: FLUKE FLK-TiS60+ 9 Hz Infrared camera in robust carrying case - 5133402 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description: Improve your or your team's performance with 320 x 240 resolution. Infrared images captured with the TiS60+ capture smaller temperature differences at greater distances. If you have no experience with thermal imaging or your camera is used by a team with different thermal imaging experiences, the TiS60+ offers fixed focus with the ability to capture quality images from greater distances. With the TiS60+, you can see things invisible to the eye and detect problems that cannot be detected with other technologies. It is a user-friendly, reliable tool that the team can rely on. User-friendly with fixed focus 3.5-inch LCD screen Ability to capture, review and store images with one hand Fluke Connect compatibility for wireless sharing Often the next big challenge with infrared imaging is to ensure that the images captured by the team can be quickly added to work orders. The TiS60+ features IR Photo Notes, making this easy. They give the camera user an easy way to add photos linked to the image, such as the name of the equipment or the location of the room linked to the thermal image, so that the person creating the work order can direct technicians to the right location for repairs. Be prepared with everything you need to establish a baseline for your equipment, create a preventive maintenance programme and define standard work orders. The Fluke TiS60+ gives you the thermal data you need to get the job done. Key features: Functions and features Resolution 320 x 240 Drop test from 2 metres IR-Fusion technology for context Fixed focus Measures up to 400 °C ds: dsc: kts: Infrared camera in robust carrying case kpn: FLK-TiS60+ 9 Hz kpn_dash: FLK kpn_clear: FLKTiS609Hz bkpn: FLUKE FLK-TiS60+ 9 Hz bkpn_clear: FLUKE FLKTiS609Hz c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5133402 sr_ns: FLUKE5133402
