r: 02954128 p: 1587.066 pid: 71468 b: FLUKE q: 0 st: lt: 10 ean: 0095969781817 sr: FLUKE 4604605 sr_no_br: 4604605 sr_no_br_cl: 4604605 sr_cl: FLUKE4604605 sr_dash: sold: 3174.132 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789 process meter with IR 3000 FC connector - 4604605 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: Now compatible with Fluke Connect app The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. This instrument combines the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and Fluke Connect's wireless data logging capabilities with ShareLive video call function (sold separately), process engineers can now do much more while carrying much less. And with the built-in, selectable 250-ohm HART resistor, there's no need to carry a separate resistor either. Features of the Fluke 789 24V loop power supply Very large dual display Improved backlight with 2 brightness settings Max. permissible load resistance 1200 ohms at mA-source Heart mode setting with loop power supply and built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA generation for a quick 'span check' (checking zero and full scale) Externally accessible fuses that are easy to replace Infrared port for processing data in the FlukeView Forms software (V2.1) The Fluke 789 also has the following features of the Fluke 787 Accurate digital True-RMS multimeter, 1000 V, 440 mA DC voltage accuracy of 0.1% DC current measurement with 0.05% accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode and through-bell test Simultaneous display of mA and % scale 20 mA DC current source / loop calibrator / simulator Manual step function (100%, 25%, coarse, fine) plus automatic step and rise functions Externally accessible battery that can be easily replaced Safety standards Meets standards 1000 volts EN61010-1 CAT III and 600 volts EN61010-1 CAT IV. ds: dsc: Scope of delivery Fluke 789 ProcessMeter IR3000 FC connector AC175 alligator clips Four (4) AA 1.5V alkaline batteries (installed) TL71 set of safety measuring leads kts: process meter with IR 3000 FC connector kpn: 789 kpn_dash: kpn_clear: 789 bkpn: FLUKE 789 bkpn_clear: FLUKE 789 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4604605 sr_ns: FLUKE4604605
r: 03045118 p: 630.53 pid: 72391 b: FLUKE q: 0 st: lt: 6 ean: 0095969679329 sr: FLUKE 4370598 sr_no_br: 4370598 sr_no_br_cl: 4370598 sr_cl: FLUKE4370598 sr_dash: sold: 3152.65 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 179 IMSK service kit industrial multimeter - 4370598 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description A True-RMS multimeter equipped with all functions, combined with a rugged, reliable True-RMS current clamp in basic design Ideal for fault finding in electrical and electronic systems Measurements up to 1000 V AC or DC (179 DMM) and up to 400 A AC (323 clamp) This set combines the Fluke 179 True-RMS DMM and the Fluke 323 True RMS current clamp. Both tools are rugged, reliable and accurate, and extremely easy to use. Fluke 179 True-RMS digital multimeter The Fluke 179 is the preferred solution for professional technicians worldwide. This tool includes all the features you need for troubleshooting and repair of electrical and electronic systems Features accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode testing Increases productivity with manual and automatic range setting, display hold, auto hold and min/max recording Built-in thermometer lets you take temperature measurements without having to carry a separate instrument Fluke 323 True-RMS Current Clamp The Fluke 323 current clamp offers True-RMS measurements, optimal ergonomics and a large display for efficient troubleshooting. It can perform in the most demanding environments and delivers noise-free, reliable readings, so you can diagnose problems almost anywhere with confidence. Robust, reliable True RMS current clamp in basic version for measuring current up to 400 A Measures AC current up to 400 A Measures AC voltage and DC voltage up to 600 V Provides True-RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance up to 4 kOhm with throughput detection With safety specification CAT III 600 V, CAT IV 300 V ds: dsc: Scope of delivery Fluke 179 True-RMS digital multimeter Fluke 323 True-RMS current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point Test lead set AC175 Screw-threaded crocodile clips set kts: service kit industrial multimeter kpn: 179 IMSK kpn_dash: kpn_clear: 179IMSK bkpn: FLUKE 179 IMSK bkpn_clear: FLUKE 179IMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4370598 sr_ns: FLUKE4370598
r: 08106976 p: 1049.876 pid: 72792 b: FLUKE q: 0 st: lt: 8 ean: 0195112035719 sr: FLUKE 5317706 sr_no_br: 5317706 sr_no_br_cl: 5317706 sr_cl: FLUKE5317706 sr_dash: sold: 3149.628 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1662 SCH FTT KIT set 1662 multifunction tester with TruTest data management software - 5317706 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Fluke 1662 multifunction tester The Fluke 1662 installation tester offers you Fluke reliability and all the basic testing capabilities you need for everyday installation testing. It tests according to all local regulations and is simple and intuitive to use. Additional useful features, such as on/off automatic start for RCD and loop test and self-test, save time and give you more confidence in your results. Fluke TruTest data management software Fluke TruTest software is designed to eliminate the problems associated with traditional electrical system data management and reporting. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement tools from Fluke and Beha-Amprobe. The TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. ds: dsc: Scope of delivery 1662 multifunctional installation tester 6x AA batteries (IEC LR6) C1600 carrying case Zeroing function Heavy-duty power cord STD standard test lead set Padded carrying and waist strap Quick guide TP165X probe with remote control and cable IR189USB cable TruTest data management software kts: set 1662 multifunction tester with TruTest data management software kpn: 1662 SCH FTT KIT kpn_dash: kpn_clear: 1662SCHFTTKIT bkpn: FLUKE 1662 SCH FTT KIT bkpn_clear: FLUKE 1662SCHFTTKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5317706 sr_ns: FLUKE5317706
r: 03392951 p: 3112.59 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 3112.59 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02904822 p: 965.195 pid: 71206 b: FLUKE q: 0 st: lt: 6 ean: 0095969586689 sr: FLUKE 3947801 sr_no_br: 3947801 sr_no_br_cl: 3947801 sr_cl: FLUKE3947801 sr_dash: sold: 2895.585 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289 Digital RMS multimeter with data logging and trend capture - 3947801 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App The Fluke 289 is the high-performance industrial multimeter with logging function of the new generation, designed to solve complex problems in electronics, plant automation, power distribution and electromechanical equipment. With the ability to log data and view it graphically on screen, you can solve problems faster, minimising downtime. Let the new Fluke 289 monitor your systems or processes while you are away doing other work. Now communicate wirelessly with your iOS and Android devices, using the new Fluke Connect Mobile App and the ir3000 FC wireless connector (not included). Key features: Compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large dot matrix display, 1/4 VGA, up to 50,000 counts and with white backlight. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of recorded measurement values without a PC. Store up to as many as 15,000 recorded events. Multiple log sessions can be saved before downloading to a PC. Two connections for 50-ohm range with 1 milliohm resolution and 10 mA source current. Useful for measuring the resistance of motor windings and comparing differences in them or for measuring contact resistance. Low-pass filter for accurate simultaneous voltage and frequency measurements in frequency-controlled drives and other devices that cause electrical disturbances. LoZ Volts. Low input impedance, prevents erroneous readings due to 'phantom voltage'. Also recommended for testing for presence or absence of (mains) voltage. Internal auxiliary screens for measurement functions. Uncertain about a function? Go to that function and press the 'i' key. Real-time clock for automatic timing of stored measurement values. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. True-RMS AC voltage and current for accurate measurements on non-linear signals. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Peak recording for recording transients at speeds up to 250 ?s. Premium measuring leads and crocodile clips included. Banana plugs included. Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. Optional FlukeView Forms software lets you document, store and analyse individual readings or a range of readings, then turn them into professional-looking documents. Limited lifetime warranty. ds: dsc: Scope of delivery 289 True-RMS electronic multimeter with log function and TrendCapture TL71 test leads AC175 alligator clips Batteries (6x AA) Note: Fluke ir3000 FC infrared connector required for communication via Fluke Connect (not included) kts: Digital RMS multimeter with data logging and trend capture kpn: 289 kpn_dash: kpn_clear: 289 bkpn: FLUKE 289 bkpn_clear: FLUKE 289 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947801 sr_ns: FLUKE3947801
r: 02951454 p: 2867.826 pid: 72620 b: FLUKE q: 0 st: lt: 12 ean: 0095969814966 sr: FLUKE 4755890 sr_no_br: 4755890 sr_no_br_cl: 4755890 sr_cl: FLUKE4755890 sr_dash: sold: 2867.826 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 123B/EU/S industrial scopemeter 20MHZ (incl. SCC kit) - 4755890 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 123B handheld oscilloscope Shielded test leads with black earth wires Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 20MHZ (incl. SCC kit) kpn: 123B/EU/S kpn_dash: kpn_clear: 123BEUS bkpn: FLUKE 123B/EU/S bkpn_clear: FLUKE 123BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755890 sr_ns: FLUKE4755890
r: 02951452 p: 2841.38 pid: 71097 b: FLUKE q: 0 st: lt: 10 ean: 0095969814805 sr: FLUKE 4755731 sr_no_br: 4755731 sr_no_br_cl: 4755731 sr_cl: FLUKE4755731 sr_dash: sold: 2841.38 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU industrial scopemeter 40MHZ - 4755731 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 1x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack kts: industrial scopemeter 40MHZ kpn: 124B/EU kpn_dash: kpn_clear: 124BEU bkpn: FLUKE 124B/EU bkpn_clear: FLUKE 124BEU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755731 sr_ns: FLUKE4755731
r: 03252439 p: 902.98 pid: 73069 b: FLUKE q: 0 st: lt: 38 ean: 0195112041215 sr: FLUKE 5337394 sr_no_br: 5337394 sr_no_br_cl: 5337394 sr_cl: FLUKE5337394 sr_dash: sold: 2708.94 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 393FC-PVLEAD current clamp 1500 V with Pomona test leads - 5337394 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 393 FC CAT III 1500 V True-RMS solar current clamp with iFlex is designed for solar photovoltaic (PV) technicians and maintenance professionals working in high DC voltage environments: PV arrays, wind power, electric railways, battery banks for emergency power supplies in data centres. The current clamp measures up to 1500 V DC and 1000 V AC with test leads and up to 999.9 A DC or AC via the jaw. The included iFlex flexible current clamp offers extended AC current measurements up to 2500 A. The 393 has a thin jaw, allowing you to access cables in crowded combiner cabinets. Moreover, the measuring leads are designed with your work in mind and also comply with safety specification CAT III 1500 V DC. Key features Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and IP54 rated for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity IP54 protection class, ideal for outdoor work on solar panels and wind systems DC power measurement, with readings in kVA Audio polarity indicator helps prevent unintentional faulty wiring Visual throughput tests display a bright green light on the screen, ideal when working in dark and noisy environments Log and report test results via Fluke Connect software When measuring AC current, the included flexible current clamp iFlex gives you unparalleled access to cables in tight spaces. The iFlex probe can be rotated through extremely tight spaces and delivers accurate current measurements. ds: dsc: Scope of delivery 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, right-angle plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap High-quality protective bag Pomona PVLEAD1 MC4 to 4 mm test lead set Pomona PVLEAD3 MC4 measuring lead set for solar current clamp kts: current clamp 1500 V with Pomona test leads kpn: 393FC-PVLEAD kpn_dash: 393FC kpn_clear: 393FCPVLEAD bkpn: FLUKE 393FC-PVLEAD bkpn_clear: FLUKE 393FCPVLEAD c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5337394 sr_ns: FLUKE5337394
r: 02951127 p: 890.814 pid: 73255 b: FLUKE q: 0 st: lt: 8 ean: 0095969586665 sr: FLUKE 3947781 sr_no_br: 3947781 sr_no_br_cl: 3947781 sr_cl: FLUKE3947781 sr_dash: sold: 2672.442 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 287 Digital RMS multimeter with data logging and trend capture - 3947781 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Compatible with Fluke Connect Mobile App The Fluke 287 True-RMS electronic multimeter with log function and TrendCapture quickly documents design performance and graphically displays what happened. Thanks to its unique logging and graphing capabilities, you no longer need to download logged values to a PC to detect a trend. The Fluke 287 combines more accuracy and convenience in a handheld multimeter than ever before. Key features Now compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring tools with optional ir3000 FC infrared connector (sold separately). Instantly show your team what you see, with the ShareLive video call feature (Fluke Connect Mobile App and ir3000 FC wireless connector required). TrendCapture quickly graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large 1/4 VGA display up to 50,000 counts, with white backlight. Multiple sets of measurement information can be displayed simultaneously. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of captured measurement values without a PC. Store up to 15,000 recorded events. Internal help screens for measurement functions. You can store and name measured values on site and recall them later. Multilingual interface. Multiple logging sessions possible without downloading. DC base accuracy of 0.025%. AC voltage bandwidth 100 kHz. Real-time clock for automatic time stamping of stored measured values. True-RMS AC voltage and current for accurate measurements for complex signals or non-linear loads. AC bandwidth specified up to 100 kHz. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Temperature function. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. Peak recording for recording transients at rates up to 250 ?s. Premium measurement leads and crocodile clips included. Optional FlukeView Forms software lets you document, store and analyse individual measured values or a range of measured values, then turn them into professional-looking documents. With the optional magnetic hanging clip, you can hang the meter so you can easily view it while keeping your hands free for work. Limited lifetime warranty. ds: dsc: Scope of delivery 287 True-RMS electronic multimeter with log function and TrendCapture TL71 test leads AC175 alligator clips Batteries (6x AA) Note: Fluke ir3000 FC infrared connector required for communication via Fluke Connect (not included) kts: Digital RMS multimeter with data logging and trend capture kpn: 287 kpn_dash: kpn_clear: 287 bkpn: FLUKE 287 bkpn_clear: FLUKE 287 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947781 sr_ns: FLUKE3947781
r: 37990055 p: 408.328 pid: 74248 b: FLUKE q: 0 st: lt: 8 ean: 0095969287517 sr: FLUKE 2418208 sr_no_br: 2418208 sr_no_br_cl: 2418208 sr_cl: FLUKE2418208 sr_dash: sold: 2449.968 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 971 temperature-humidity meter - 2418208 cn: TEMPERATURE AND HUMIDITY METER cn2: TEMPERATURE AND HUMIDITY METER cn_clear: TEMPERATUREANDHUMIDITYMETER d: Product description: Temperature and humidity are two important factors in maintaining optimum comfort levels and good indoor air quality. Measure humidity and temperature quickly and easily with the Fluke 971. It is indispensable for plant maintenance engineers, utility technicians, HVAC field service personnel, and specialists determining indoor air quality (IAQ). Lightweight and comfortable to hold, the Fluke 971 is the perfect tool for monitoring problem areas. It is built for performance and durability, with its rugged holster. Key features Illuminated dual display for humidity and temperature Suitable for dew point and wet bulb temperatures Storage capacity of 99 records Ergonomic design with belt clip and protective holster Fast-response capacity sensor with protective cover Compact and lightweight (188 g) Temperature range from -20 °C to 60 °C Relative humidity from 5% to 95% Min/Max/Avg and Data Hold Battery indicator ds: dsc: Scope of delivery Temperature/humidity meter Operating instructions 4 AAA alkaline batteries kts: temperature-humidity meter kpn: 971 kpn_dash: kpn_clear: 971 bkpn: FLUKE 971 bkpn_clear: FLUKE 971 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature and humidity meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature and humidity meter sr_no_br_cl_ns: 2418208 sr_ns: FLUKE2418208
r: 02953467 p: 1163.7 pid: 72119 b: FLUKE q: 0 st: lt: 8 ean: 0095969475815 sr: FLUKE 3362352 sr_no_br: 3362352 sr_no_br_cl: 3362352 sr_cl: FLUKE3362352 sr_dash: sold: 2327.4 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 772 mA current clamp - 3362352 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Key features: In this class the highest accuracy of 0.2% Resolution and sensitivity of 0.01 mA Measurement of signals from 4 to 20 mA 'without interrupting the loop' Measurement of mA signals for PLCs and analogue I/O signals of control systems. Illuminated dual display showing both mA measurement values and percentage of the range from 4 to 20 mA Spot light illuminates wires that are poorly visible when measuring in dark enclosures Detachable current clamp with extension cable for measurements in narrow openings Measurement of signals from 10 to 50 mA in older control systems with a range of 99.9 mA Automatically change the output signal for remote testing from 4 to 20 mA Power saving options: automatic instrument shutdown and backlight shutdown after certain time to extend battery life Hold function records and displays changing measured values Measurement of signals from 4 to 20 mA with internal measurement Simultaneous internal measurement of mA with 24V loop power supply for powering and testing transmitters Generation of signals from 4 to 20 mA for testing I/Os or I/Ps of control systems mA output signal linearly increasing or stepped output signal (25% steps) Automatically change the output signal for remote testing from 4 to 20 mA ds: dsc: Scope of delivery Four AA alkaline batteries (installed) Carrying case TL75 measuring leads AC72 detachable clamp TL940 measuring leads with mini-hooks Instruction sheet Hanging system with Velcro strap kts: mA current clamp kpn: 772 kpn_dash: kpn_clear: 772 bkpn: FLUKE 772 bkpn_clear: FLUKE 772 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 3362352 sr_ns: FLUKE3362352
r: 02951129 p: 758.795 pid: 73262 b: FLUKE q: 0 st: lt: 8 ean: 0095969586658 sr: FLUKE 3947770 sr_no_br: 3947770 sr_no_br_cl: 3947770 sr_cl: FLUKE3947770 sr_dash: sold: 2276.385 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 27-II industrial multimeter (IP67) - 3947770 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new standard for ruggedness: The Fluke 27 II and 28 II digital multimeters set a new standard for working in harsh conditions, while having the features and accuracy to solve most electrical problems. Both meters are rated to IP 67 (ensuring water and dust tightness), have been submitted to MSHA for approval, have an extended operating temperature range of -15 °C to + 55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) at a relative humidity of 95% and are designed and tested to withstand a 3 m drop. Fluke 20-series multimeters are designed for use in the most demanding environments. Key features Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 200 kHz Enlarged AC voltage bandwidth ? 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II) Built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (28 II) Resistance measurement, dial-through and diode test Min/Max and Average recording for automatic recording of variations Peak min-max (28 II) Unique function for accurate voltage and frequency measurements on variable-speed drives and other devices causing electrical disturbances (28 II) Further features New ? IP 67 protection, i.e. water and dust tight, fully sealed for use in harsh environments Designed to withstand a 3-metre drop (with holster) Display mode with high resolution of 20,000 counts (28 II) True-RMS AC voltage and current for accurate measurements on non-linear signals (28 II) Average response voltage and current for measurements (27 II) New ? Illuminated keys ensure good legibility even in poorly lit environments Large display figures and bright white backlight with two illumination levels for better legibility Reversible holster for extra protection when not in use The meter withstands dangerous voltage peaks of 8,000 V caused by switching loads and by disturbances in industrial circuits. It complies with the second edition of IEC and ANSI safety standards for electrical equipment. Long battery life (800 hours) Relative mode for eliminating test lead resistance when measuring low resistance values Automatic and manual range adjustment for maximum flexibility Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. MSHA approval ds: dsc: Scope of delivery Holster Test leads Alligator clips Printed manual/quick start guide CD ROM manual 3 AA batteries kts: industrial multimeter (IP67) kpn: 27-II kpn_dash: 27 kpn_clear: 27II bkpn: FLUKE 27-II bkpn_clear: FLUKE 27II c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947770 sr_ns: FLUKE3947770
r: 03343204 p: 2153.375 pid: 166035 b: FLUKE q: 0 st: lt: 10 ean: 0195112119617 sr: FLUKE 5581068 sr_no_br: 5581068 sr_no_br_cl: 5581068 sr_cl: FLUKE5581068 sr_dash: sold: 2153.375 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1672 SCH FTT multifunctional installation tester with TruTest software in case - 5581068 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1672 multifunction installation tester with the TruTestTM software bundle will revolutionise the way you work. With its ergonomic design, seamless user interface, integrated data management capabilities and comprehensive reporting software, the 1672 sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557.The Fluke 1670-series multifunctional installation testers streamline your installation and test preparations using the intuitive user interface and a high-resolution colour touch screen. You can enter site information and set test routes directly from the tester or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software in case kpn: 1672 SCH FTT kpn_dash: kpn_clear: 1672SCHFTT bkpn: FLUKE 1672 SCH FTT bkpn_clear: FLUKE 1672SCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581068 sr_ns: FLUKE5581068
r: 02958459 p: 2069.644 pid: 71632 b: FLUKE q: 0 st: lt: 8 ean: 0095969643757 sr: FLUKE 4234361 sr_no_br: 4234361 sr_no_br_cl: 4234361 sr_cl: FLUKE4234361 sr_dash: sold: 2069.644 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 709H precision loop calibrator with HART communication/diagnosis - 4234361 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 709 precision loop calibrator is built around a user-friendly interface with a 'Quick-Set' encoder dial. The protective holster fits snugly in the technician's hand and the large backlit display is easy to read, even in dark, cramped working environments. This instrument reduces the time of measuring, or generating, voltage or current and feeding a loop. It is designed with time-saving and high-quality results in mind. The 709H provides HART communication and supports a specially selected set of universal and common HART commands. This makes the 709H unique: an affordable, compact loop calibrator on the one hand, and a powerful tool for HART communication on the other. Key features Highest-in-class accuracy of 0.01% of reading Rugged compact design runs on (6) standard AAA batteries Intuitive user interface with 'Quick-Set' button for quick set-up and user-friendliness Built-in selectable 250?resistor for HART communication 24V loop power supply with mA measurement mode (-25% to 125%) Resolution of 1 µA in mA ranges and 1 mV in voltage ranges Simple two-wire connection for all measurements Automatic switch-off to save battery power (adjustable up to 30 minutes) Variable step and rise time in seconds Adjustable range selection (0 to 20 mA or 4 to 20 mA) Valve test (simulating average mA values with % keys) HART-specific functions and capabilities include: Fast transfer of calibration data. The 709H/Track software/cable documents the parameters of all HART transmitters in your installation, in .csv or in .txt format. Log or record data about a particular transmitter for the purpose of troubleshooting. The data logging function has a selectable recording interval from 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data group contains the measurement of the 709H, all four process variables and the default status conditions. In the communicator mode, the user can read basic information from the device, perform diagnostic tests and set the calibration of most HART communication-capable transmitters. In the past, this was only possible with a dedicated communicator, a high-end multifunction calibrator or a laptop with a HART modem. With the Fluke 709H, practically any technician can service and support HART devices. ds: dsc: Scope of delivery Fluke 709H precision current loop calibrator with HART communication/diagnostics 754-8016 crocodile clip set 75X-8014 stackable test lead set TP220-4201 measuring probes AC280-5001 Suregrip-haakklemmen Carrying case Six AAA batteries (installed) CD-ROM with product manual Quick guide Safety information kts: precision loop calibrator with HART communication/diagnosis kpn: 709H kpn_dash: kpn_clear: 709H bkpn: FLUKE 709H bkpn_clear: FLUKE 709H c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4234361 sr_ns: FLUKE4234361
r: 37990014 p: 1961.327 pid: 72991 b: FLUKE q: 0 st: lt: 15 ean: 0095969050692 sr: FLUKE 620101 sr_no_br: 620101 sr_no_br_cl: 620101 sr_cl: FLUKE620101 sr_dash: sold: 1961.327 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 715 Volt/mA calibrator - 620101 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 715 V/mA calibrator delivers excellent performance and is extremely durable and reliable. This calibrator comes in the package with the rugged Fluke 80-series DMM. It is compact, lightweight, and easy to carry. The 715 is easy to use thanks to its push-button interface, which is similar to that of the Fluke 740-series multifunction documenting process calibrators. It is resistant to EMI, dust and splash water, and features a removable battery cover that allows quick battery replacement. Key features Measure loop current signals (0-20 mA, 4-20 mA) with a very high accuracy of 0.015% and a resolution of 1 mA Measure the output voltage signals of a process, coming from PLCs or transmitters Generate or simulate a loop current of 24 mA Supply voltage up to 100 mV or 10 V 24-V loop power supply with simultaneous current measurement Extra accuracy when measuring and generating voltage and current Longer battery life 250-ohm HART resistor with loop power supply Holster includes a storage compartment for test leads Compatible with the magnet pendant system for tool sets Gradual and linear rising output function Adjustable zero position and adjustable range ds: dsc: Scope of delivery Fluke 715 Volt/mA calibrator including: Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: Volt/mA calibrator kpn: 715 kpn_dash: kpn_clear: 715 bkpn: FLUKE 715 bkpn_clear: FLUKE 715 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 620101 sr_ns: FLUKE620101
r: 02909234 p: 650.418 pid: 72527 b: FLUKE q: 0 st: lt: 15 ean: 0095969400367 sr: FLUKE 2837799 sr_no_br: 2837799 sr_no_br_cl: 2837799 sr_cl: FLUKE2837799 sr_dash: sold: 1951.254 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Max. temperature 650 °C Optical ratio 30:1 Power supply 2 x AA Accuracy ± 1 °C n: FLUKE 566 infrared thermometer (from -40°C to +650°C) - 2837799 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: The 566 infrared and contact thermometer features a simple, three-button on-screen menu interface (in 6 languages) to make measuring temperature easier than ever. You can quickly navigate through advanced functions to adjust emissivity, start recording data or turn alarms on and off with just a few button presses. With its rugged, user-friendly and ergonomic design, the Fluke 566 can withstand harsh industrial, electrical and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), allowing you to work more efficiently in more applications. Key features Two-in-one IR and contact thermometer with a 30:1 distance-to-plate ratio. Measures temperatures from -40°C to 650°C (40°F to 1202°F). Makes it easy to access advanced functions with softkey buttons and graphic display. Features a rugged, ergonomic design that withstands harsh industrial, electrical and mechanical environments. Works with most K-type thermocouples Other features Adjustable radiant power allowing you to measure a wide variety of surfaces with confidence. Up to 20 data points for later downloading and recall Two levels of display backlighting Type-K thermocouple probe included Features audible and visual alarms to immediately alert you to measurements outside set limits. Provides MAX, MIN, DIF and AVG functions to quickly identify problems. ds: dsc: Scope of delivery Fluke 566 Infrared and contact thermometer Thermocouple probe K Durable hard case 2 AA batteries Quick start guide in 6 languages User guide on CD in 6 languages (English, Spanish, French, German, Portuguese and Simplified Chinese) 2-year warranty kts: infrared thermometer (from -40°C to +650°C) kpn: 566 kpn_dash: kpn_clear: 566 bkpn: FLUKE 566 bkpn_clear: FLUKE 566 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 2837799 sr_ns: FLUKE2837799
r: 02951135 p: 1833.175 pid: 71968 b: FLUKE q: 0 st: lt: 8 ean: 0095969599733 sr: FLUKE 4017165 sr_no_br: 4017165 sr_no_br_cl: 4017165 sr_cl: FLUKE4017165 sr_dash: sold: 1833.175 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 28 II EX True RMS digital multimeter - 4017165 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description 4-1/2-digit mode for accurate measurements (20,000 counts) True RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V and 10 A AC and DC (remember that hazardous areas require measurements with lower values) A low-pass filter ensures accurate voltage and frequency measurements on frequency-controlled drives Frequency up to 200 kHz and % duty cycle, for diagnosing frequency-controlled drives and switching power supplies Resistance measurement and loop-through and diode test Capacitance range of 10,000 µF for components and motor capacitors Conductance measurements for high resistance or leakage tests Minimum, maximum and average values and peak recording for automatic recording of transients and oscillations Relative mode for eliminating test lead interference during resistance measurements Automatic and manual range setting for maximum flexibility Input Alert function protects you by means of a beeping signal and the flashing 'Lead' message when cords are connected to the wrong inputs The illuminated keys are especially easy to spot in poorly lit environments, even when wearing all the required personal protective equipment Large display figures and a bright white backlight with two illumination levels also ensure good visibility Long battery life - 400 hours normally, without backlight (alkaline) Key features A fully sealed, IP67-approved housing Resistant to a drop of up to 3 metres (with holster) Dustproof according to IEC 60529 IP6x Waterproof according to IEC 60529 IPx7 CAT III 1000 V, CAT IV 600 V Reversible holster for extra protection of the display when not in use ds: dsc: kts: True RMS digital multimeter kpn: 28 II EX kpn_dash: kpn_clear: 28IIEX bkpn: FLUKE 28 II EX bkpn_clear: FLUKE 28IIEX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4017165 sr_ns: FLUKE4017165
r: 03346457 p: 598.464 pid: 158590 b: FLUKE q: 0 st: lt: 8 ean: 0195112122648 sr: FLUKE 5593173 sr_no_br: 5593173 sr_no_br_cl: 5593173 sr_cl: FLUKE5593173 sr_dash: sold: 1795.392 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery size AA Low battery message No Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 283 FC digital multimeter CAT III 1500 V in carrying case - 5593173 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC digital multimeter is ideal for technicians working in DC environments up to 1500 V. Whether you are working with utility-scale solar photovoltaic (PV) arrays, wind power, electric railway lines or data centres, the Fluke 283 FC improves safety and increases productivity while providing accurate, reliable and reproducible results. The 283 FC comes with silicone TwistGuard test leads with safety specification TL175-HV CAT III 1500 V/CAT IV 1000 V for working in higher voltage environments without compromising safety, giving you more flexibility when testing voltage, milli voltage, resistance, continuity or capacitance. The backlit LCD display and backlit keypad make it easier to work in different lighting conditions, while the magnetic suspension kit leaves your hands free during testing. The 283 FC also comes with a custom-made carrying case that protects your investment during transport. Key features Highly accurate voltage measurements for accurate front-line fault finding Current measurements up to 60 A AC/DC for safe and more accurate fault finding in individual sets of modules (when using the optional a283 FC wireless current clamp) Visual and audio polarity indicators with on/off function help prevent wiring problems User-defined limit meter helps you make quick go/no-go decisions when looking for faults Unique multimeter readiness self-test ensures your meter is ready for testing Store and log readings in internal memory and view them on your mobile device via Fluke Connect ds: dsc: Scope of delivery 283 FC TRMS wireless digital multimeter TL175-HV TwistGuard silicone measuring leads Premium protective bag Magnetic suspension strap kts: digital multimeter CAT III 1500 V in carrying case kpn: 283 FC kpn_dash: kpn_clear: 283FC bkpn: FLUKE 283 FC bkpn_clear: FLUKE 283FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5593173 sr_ns: FLUKE5593173
r: 02951140 p: 871.138 pid: 73266 b: FLUKE q: 0 st: lt: 8 ean: 0095969262965 sr: FLUKE 2157280 sr_no_br: 2157280 sr_no_br_cl: 2157280 sr_cl: FLUKE2157280 sr_dash: sold: 1742.276 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1577 insulation multimeter - 2157280 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Two powerful instruments in one The Fluke 1587 and 1577 insulation multimeters combine a digital insulation tester with a full-fledged digital True RMS multimeter in one compact and portable instrument, for optimum versatility in both troubleshooting and preventive maintenance. Whether you are working on motors, generators, cables or switchgear, the Fluke 1587/1577 insulation multimeters are ideal to help you do just that, and at a much lower cost than if you had to buy two products. Key features: Insulation test voltages: 500 V and 1000 V Insulation test: 0.1 MOhm to 600 MOhm Automatic discharge of capacitive voltages AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Pass-through Three-year warranty Remote use probe, test leads, alligator clips Robust carrying case Automatic switch-off for longer battery life True-RMS Large backlit display Detection of live circuits prevents, for additional user safety, insulation tests at voltages > 30 V Measurement category CAT III 1000 V, CAT IV 600 V Suitable for optional Fluke TPAKTM magnetic pendant system, leaving your hands free for other work ds: dsc: kts: insulation multimeter kpn: 1577 kpn_dash: kpn_clear: 1577 bkpn: FLUKE 1577 bkpn_clear: FLUKE 1577 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 2157280 sr_ns: FLUKE2157280
r: 02909133 p: 289.88 pid: 71879 b: FLUKE q: 0 st: lt: 10 ean: 0095969692021 sr: FLUKE 4401563 sr_no_br: 4401563 sr_no_br_cl: 4401563 sr_cl: FLUKE4401563 sr_dash: sold: 1739.28 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T3000FC Type K wireless temperature module - 4401563 cn: THERMOMETER cn2: THERMOMETER cn_clear: THERMOMETER d: Key features: The Fluke t3000 FC wireless temperature module type K wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke t3000 FC wireless temperature module type K enables the following: Use as a standalone gauge or as part of the system Log function to record and store up to 65,000 measured values Product description: All the facts, right on site. The Fluke t3000 FC wireless temperature module type K is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measurement tools ensure that instruments and not your body are near live electrical dividers. It's simple. Connect the t3000 FC wireless temperature module, or any of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. Even better: the Fluke Connect instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Don't get stuck while detecting intermittent electrical faults Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We have solved that problem with Fluke Connect ? leave your remote modules connected to log readings and leave the site to address other problems. You can then download the data for further analysis. Work safely near electrical distributors while wearing less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more t3000 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Cheaper and faster 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect voltage module to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Add your laptop and go from logging straight to analysis and diagnosis. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. The t3000 FC temperature modules enable the following: Detect temperature differences between three phases in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit loads. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery FC wireless temperature module type K Fluke t3000 thermometer with thermocouple 80PK-1 thermocouple, type K, bulb Magnetic suspension strap kts: Type K wireless temperature module kpn: T3000FC kpn_dash: kpn_clear: T3000FC bkpn: FLUKE T3000FC bkpn_clear: FLUKE T3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Thermometer | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke thermometer sr_no_br_cl_ns: 4401563 sr_ns: FLUKE4401563
