Scope of supply
- ¼ inch NPT to ¼ inch NPT adapter to connect the reference gauge port on the pump housing to the 1/4 NPT female fitting on Fluke 700P29, P30 and P31 pressure modules.
- (2) ¼ inch NPT male to ¼ inch BSP female adapters
- ¼ inch NPT tee (installed)
- Instruction sheet
Product description
- Variable stroke size adjustment, allowing the user to vary the volume and pressure per stroke
- Fine regulator for integral pressure, for fine pressure adjustment
- Direct connection to pressure modules allows two separate parts to form one instrument when performing pressure calibrations and measurements
- Two ¼ inch NPT pressure ports, one for reference (pressure module or pressure gauge), one for the device under test
- Compatible with optional Fluke-700PRV pressure reducing valve designed to protect pressure module from overpressure damage
- Better suction
- Better stroke limiting mechanism
The Fluke 700HTP-2 is a hand-operated hydraulic pressure pump designed to generate calibration pressure up to 10,000 psi/690 bar. Designed for use with Fluke 700-series high-pressure modules, such as the Fluke 700P09, 700P29, 700P30 and 700P31.
Ideal for calibration when connected to a Fluke high-pressure module via the reference port. The 700HTP-2 uses distilled water or mineral-based hydraulic oil as a means of calibrating devices with a high-pressure input, such as pressure transmitters or pressure gauges. Can also be used with Fluke 717 pressure calibrators.
Note: the user must fit a hose with appropriate connections to carry pressure from the port of the device under test to the calibration device under test, such as the Fluke 700HTH-1 hose set.
