What drill hole diameter is required for this anchor?

The Fischer TA M10 T/25 S sleeve anchor requires a drill hole diameter of 15 mm.

Which base materials is this anchor suitable for?

It is suitable for fixings in non-cracked concrete (C20/25 to C50/60) and dense natural stone.

What type of installation is used for this anchor?

This model is designed for time-saving push-through installation directly through the fixture.

What are the dimensions of this sleeve anchor?

The anchor features an M10 thread and has an overall length of 100 mm.

FISCHER TA M10 T/25 S sleeve anchor push-through assembly zinc plated - 90269

Name: FISCHER TA M10 T/25 S sleeve anchor push-through assembly zinc plated - 90269
Brand: FISCHER
SKU: 02019387
Price: 4.32 EUR
Availability: PreOrder

Supplier number: FISCHER 90269 | EAN 4006209902691

4.32 tax incl.

€3.57 excl. VAT (incl. all environmental contributions)

On order: delivered from 14/10/2026

The minimum purchase order quantity for the product is 25.

Delivery by DHL

✆ Talk to a specialist

Secure structural anchoring with Fischer

Practical benefits

Fast and simple installation: The optimized geometry allows you to set the anchor with minimal effort, even when working in extremely confined spaces.
Balanced heavy load distribution: The three-part expansion sleeve evenly disperses force, allowing you to maintain minimal edge and axial spacing.
Flush and clean dismantling: The detachable screw connection enables you to remove fixtures completely flush with the base surface whenever needed.

In a nutshell

The right choise for

With the Fischer ta M10 T/25 s sleeve anchor, you achieve secure and heavy-duty fixings in non-cracked concrete and dense natural stone. Designed for fast push-through installation directly through the fixture, it saves valuable time on the job without the need for pre-alignment. Its optimized geometry allows you to set the anchor with minimal effort even in tight spaces, while the three-part expansion sleeve evenly distributes loads to permit small edge and axial distances. Crafted from zinc-plated steel with an M10 thread, a 100 mm length, and requiring a 15 mm drill hole, it is the ideal choice for mounting steel structures, brackets, ladders, and machinery.

Product information FAQ

€4.32

tax incl.

Key features according to our expert

Wire dimension: 10 mm
Overall length: 100 mm
Material: Steel
Surface treatment: Zinc plated
Safety anchor: No
Drilling diameter: 15 mm

Product description

The installation-friendly push-through anchor for fixings in non-cracked concrete.

The fischer heavy-duty anchor TA M-T is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The heavy-duty anchor is ideal for fixing consoles, ladders, and steel constructions in non-cracked concrete.

Simple assembly due to low setting energy
Low axial and edge distances due to uniform load introduction
ETA approval for non-cracked concrete
The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation
The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible
The detachable screw connection allows for surface flush removal

Suitable for

The TA M-T is suitable for push-through installation
When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall

Building materials

Approved for:

Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Application

Steel constructions
Handrails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades

All Features

Wire dimension: 10 mm
Overall length: 100 mm
Material: Steel
Surface treatment: Zinc plated
Safety anchor: No
Drilling diameter: 15 mm
Key width: 17 mm
Thread size (metric): 10 mm
Min. drill hole depth for through-hole mounting: 110 mm
Anchoring depth: 55 mm
Drill diameter: 15 mm
Anchor length: 100 mm
Wire: M10
Useful length: 25 mm
Max. attachment thickness: 25 mm

Brand FISCHER
02019387
EAN 4006209902691
Supplier number FISCHER 90269

Frequently asked questions about this product

Answered by specialists

What drill hole diameter is required for this anchor?: The Fischer TA M10 T/25 S sleeve anchor requires a drill hole diameter of 15 mm.
Which base materials is this anchor suitable for?: It is suitable for fixings in non-cracked concrete (C20/25 to C50/60) and dense natural stone.
What type of installation is used for this anchor?: This model is designed for time-saving push-through installation directly through the fixture.
What are the dimensions of this sleeve anchor?: The anchor features an M10 thread and has an overall length of 100 mm.