Product description
The FIS A versatile rod anchor
The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.
- The universal solution for various fischer injection mortars. For a manageable range and simpler storage
- Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars
- Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs
- The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications
- The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications
- Please refer to the approvals of the injection mortar used
Suitable for
- The anchor rod FIS A is suitable for pre-positioned and push-through installation
- FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base
Building materials
- In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials
Application
- Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green
