fischer_40855
fischer_40855_2
fischer_40855_3
fischer_40855_4
fischer_40855_5
fischer_40855
fischer_40855_2
fischer_40855_3
fischer_40855_4
fischer_40855_5

FISCHER 40855 rapid-action anchor FBN II 10/50 electrolytically galvanised steel

FISCHER
Supplier number: FISCHER 40855 | EAN 4006209408551
1.14 tax incl.
€0.94 excl. VAT (incl. all environmental contributions)
On stock - immediately available

The minimum purchase order quantity for the product is 20.

  • Delivery by DHL
✆ Talk to a specialist

Alternative to this product

Reliable fixings in non-cracked concrete

Practical benefits
  • Heavy duty Fischer bolt anchor: Standard anchorage depth delivers maximum load capacity, allowing you to use fewer fixing points and smaller anchor plates.
  • Flexible installation and alignment: The long M10 thread easily compensates for component tolerances and lets you carry out stand-off installations efficiently.
  • Fast and effortless driving: You achieve rapid setting with only a few hammer blows, while the drive-in pin protects the thread during installation.

In a nutshell

The right choise for

With the Fischer bolt anchor fbn II 10/50, you achieve high-strength, dependable fixings in non-cracked concrete and dense natural stone without waiting for curing times. The standard anchorage depth delivers maximum load capacity, allowing you to use fewer fixing points and smaller base plates for structural steelwork, brackets, and heavy machinery. Its long M10 thread easily compensates for component tolerances and supports pre-positioned, push-through, and stand-off installations with a 10 mm drill hole. Made from zinc-plated steel with a total length of 126 mm, the drive-in pin protects the thread during setting, letting you install quickly with minimal hammer blows and minimal torque slippage in dry indoor environments.



Product information FAQ
€1.14
In stock - tax incl.

Product information

Key features according to our expert

  • Drilling diameter: 10 mm
  • Effective length: 50/60 mm
  • Overall length: 126 mm
  • Material (bolt): Steel
  • Surface treatment (bolt): Zinc plated
  • Thread designation: M10

Product description

The cost-efficient fixing for flexible use in non-cracked concrete

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

  • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility
  • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility
  • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation
  • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment

Suitable for

  • The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions
  • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut)
  • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall
  • The head embossing offers a simple control of the anchoring
  • In the case of series installation, we recommend using the FABS bolt anchor setting tool

Building materials

Approved for:

  • Concrete C20/25 to C50/60, non-cracked

Also suitable for:

  • Concrete C12/15
  • Natural stone with dense structure

Application

  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades

All Features

Drilling diameter
10 mm
Effective length
50/60 mm
Overall length
126 mm
Material (bolt)
Steel
Surface treatment (bolt)
Zinc plated
Thread designation
M10
Pierce fitting
Yes
Anchoring depth lift, stand/lift,red
50 / 40 mm
Max. useful length lift,stand/heave,red
50 / 60 mm
Max. attachment thickness
50 mm
Remote mounting
No
Thread size (metric)
10 mm
Min. borehole depth
118 mm
Front mounting
Yes
Min. drill hole depth for through-hole mounting
118 mm
Pad (outer diameter x thickness)
20 x 2 mm
Drill diameter
10 mm
Anchoring depth
50 mm
Tightening torque
30 N-m
Anchor length
125 mm
Key width
17 mm
Wire
M10 x 86 mm
Marking in headline
S
  • Brand FISCHER
  • EAN 4006209408551
  • Supplier number FISCHER 40855

Frequently asked questions about this product

Answered by specialists
Which base materials is this bolt anchor suitable for?
It is approved for non-cracked concrete (C20/25 to C50/60) and also suitable for concrete C12/15 and dense natural stone.
What drill hole diameter is required?
You need to use a drill bit with a 10 mm diameter.
What is the maximum fixture thickness for this anchor?
The maximum usable length is 50 mm at standard anchorage depth and 60 mm at reduced anchorage depth.
Which installation methods can be used?
The Fischer FBN II is suitable for pre-positioned, push-through, and stand-off installations.
Is this anchor suitable for outdoor use?
Made of zinc-plated steel, this bolt anchor is intended primarily for dry internal applications.
Questions about this product?

Our product specialists are happy to help with any questions about this range. Call, email or chat with us!

Chat with us
0032 3 74 000 41 [email protected]

Viewed products

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.