⚡Hikoki FREE Tracker. Kings Of The Jobsite. Grab your FREE Tracker!
Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Product Range
Point angle
Quantiy per pack
Number of teeth
Bore size
Quantity per blister
For model
Length
Large diameter
Min. diameter
Connection size (machine)
Max. diameter
Outer diameter
Diameter
PG size
Connection type (machine)
Geometry (Drill point)
Countersink angle
Largest diameter
Smallest diameter
Small diameter
Effective length
Max. cutting depth
Supplier warranty
Min. countersink diameter
For thread size
Number of steps
Max. countersink diameter
Connection profile
Shank type
Standard
Number of cutting edges
Material (drill bit)
Drill bit type
Surface treatment (drill bit)
Shank size
Cutting length
For material
Overall length
Material
Number of flutes (z)
Heat resistance
Strength
RPM of, steels up to 700 N/mm²
Internal hexagon, diameter (inches)
L
Number of teeth
Coating
Workable materials 6
Stair diameter (all) mm
Workable materials 2
Workable materials 21
Tool holder
Number of cutting edges
RPM of, soft non-ferrous metals
Spiral drill bit (mm)
Number of steps
With cooling channel
Workable materials 25
Height
NL
Spiral groove
Interchangeable centring tip
Length mm (B)
Carbide version
GL
Min. drill diameter (mm)
Shaft diameter in.
Number, drill steps
Diameter
RPM of, thermoplastics, fibre-reinforced plastics (GRP/CFK)
Drilling range, up to
Workable materials 5
Workable materials 26
Workable materials 22
Workable materials 19
Workable materials 9
Workable materials 4
Length (l3)
Workable materials 8
Workable materials 23
RPM up to, soft non-ferrous metals
Workable materials 27
Drilling range, from
Workable materials 13
Workable materials
Workable materials 1
Drill stairs
Processing tasks 2
Workable materials 18
Workable materials 17
Workable materials 20
Workable materials 10
Workable materials 24
Workable materials 7
RPM of, stainless and acid-resistant steels
RPM up to, steels up to 700 N/mm²
Workable materials 11
RPM to, thermoplastics, fibreglass plastics (GRP/CFK)
Workable materials 14
Workable materials 15
Workable materials 28
Workable materials 3
Processing tasks 1
Shaft
Workable materials 12
Workable materials 16
Shaft shape
D
Max. sheet thickness (mm)
Drill diameter mm (A)
Standard PG size
Segment
Length cm
Max. drill depth
Accessory length
Diameter/wrench width mm
Drill hole sizes mm (A)
Adhesion
Greatness
Width
Pen shape
Number of drills for steel
Cutting surface length (mm)
Number of universal drills
Packaging
Application materials
Product text, accessories grey
Inch (Ø ")
Matching
Hexagon shank (d2)
Type of packaging
Title spin diagram
Drill crown depth (L1)
ETIM 8.0 Group Name
Inclination angle
ETIM 8.0 Group Code
Drill hole depth
Hole dia.
With quick-release fastener
ETIM 8.0 Class Name
Performance class
Shaft diameter
Threaded attachment
ETIM 8.0 Class Code
Shaft diameter (d) inch
Length (metres)
Spiral drill
Screw size
Length inch (B)
Board depth
RPM of, steels above 700 N/mm²
RPM of, hard non-ferrous metals
Workable materials 29
Workable materials 31
Length (l2)
Blunt nose tip
Diameter 2
New this year
s
Number of drilling steps
Minimum diameter (mm)
Max. drilling diameter (mm)
Countersink (mm)
With deburring machine
Diameter inch (A)
Workable materials 33
Milling cutter diameter (mm)
Total number of tools
Width (mm)
Diameter (mm)/Maximum value
Shank stepdrill mm
Spiral length
Total length inch (B)
Width stepdrill mm
Ø (mm)
Working length B (mm)
Workable materials 30
Workable materials 32
RPM up to, hard non-ferrous metals
Workable materials 34
Suitable for solid wood
Form
RPM up to, steels above 700 N/mm²
Shaft, shape
With shaft
RPM to, stainless and acid-resistant steels
Length (mm)
Contains diameters (Ø mm)
Shaft diameter mm
Useful length
CounterboreReach (Min-Max Ø)
Connection
Overall length (L2)
Variant
Diameter Ø (d1)
PRODUCT TYPE
Flute length from till (l2)
APPLICATIONS
Useful length
Relation Diameter-Cutting length (xD)
LENGTH
Useful length mm
Shape
MATERIAL
Diameter D
Recording
WORKING LENGTH
Min. pre-drilling diameter (d3)
Number of segments
Number of teeth (z)
Shaft diameter (d) mm
Axle intake
Health and safety
Diameter (D)
Weight oz oz
Cutting depth (ap)
Usable length mm (D)
Shank diameter mm (C)
Diameter mm (A)
Shaft diameter (d)
Total length mm (B)
Weight g
Diameter Ø (d3)
Usable length (L1)
Total length mm
Working length (l3)
Point type
Diameter (mm)
Overall length (mm)
Spiral type
Shank Ø (d2)
Point angle
Standard
Flute length (l2)
Number
Tolerance d1 (Tol. d1)
Coolant feed
Cutting direction
Surface
Drill diameter (d1)
Total length (l1)
Tool material
Usable length (mm)
Tolerance d2 (Tol. d2)
MAX. CUTTING CAPACITY AT 45° [SQUARE PROFILE]
Diameter mm
WEIGHT
DIAMETER
THICKNESS
PERFORMANCE
Useful length (L1) mm
Overall length (L2) mm
Diameter (D) mm
Cutting depth
Quality
Shank type
Working length
Tube Ø
Length
Internal diameter
Shank (d2)
Working length (mm)
Base material
Pre-drilling
Standard ISO metric size
Porphyry
Bore Ø (d2)
Processing tasks
Asphalt
Gas concrete blocks
Fits DCM2 250C & DCM2 350C
Stripping bar
Nominal diameter
Second length (l4)
Bit size
Take-up shaft
Diameter inch
Workable materials (detail)
Diameter
Diameter (D) 2
Stair height mm
Segment height
Outer diameter mm
Stair diameter (range) mm
Self service - packing
Cutting material
Shaft length
Ø shaft metric
Length, total
Useful length L2)
Dimensions
Overall length (mm)
Drill diameter
Collet (mm)
with battery / rechargeable battery
Tool for electrics
Suitable for
Marble
Matching anchor type
ESD article
X-LOCK
Number per pack
Metric (M)
Shaft diameter (mm)
Suitable for stainless steel
Suitable for steel
Implementation
Suitable for wood
Shaft diameter (D)
Diameter (D) inch
Key width (d) inch
Suitable for non-ferrous metals
Width (d) mm
Total length
Specification
Shaft diameter
Min. order quantity
Segment height mm
Size thread (M)
Suitable for plastic
Shaft diameter d
Lime and sandstone blocks - extra hard
Recording system
With centre drill
Granite
Quantity
Artificial stone
Radius (r)
Segment height (mm)
Spiral length
Drill diameter (mm)
Suitable for cast iron
Drilling crown depth (L1) mm
Cutting edges, number
Suitable for concrete
Suitable for stone
Suitable for ceramics
Suitable for glass
Step height
Diameter (inch)

Buy a Gift Card

Gift Card

dewalt_dt9448_qz

DEWALT DT9448-QZ SDS-Max drill bit EXTREME HM 45x450x570mm

  • Diameter: 45 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 570 mm
Delivery time average 9 days.
Recommended Retail Price €322.71
139.60
€115.37 excl. VAT
bosch_2608900165

BOSCH 2608900165 Expert hammer drill SDS-Plus-7X, 10pcs 6.5x200x265mm

  • Diameter: 6,5 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 265 mm
Delivery time average 9 days.
Recommended Retail Price €206.92
104.60
€86.45 excl. VAT
bosch_2608900214

BOSCH 2608900214 Expert hammer drill SDS-Max-8X, 16x200x340mm

  • Diameter: 16 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 340 mm
On stock, immediately available.
Recommended Retail Price €99.20
41.80
€34.54 excl. VAT
carat_etdb008000

CARAT ETDB008000 Brilliant tile drill bit for dry use on drilling machines 8 mm

  • Diameter: 8 mm
  • Length: 35 mm
  • Connection type (machine): Outer hexagon
On stock, immediately available.
Recommended Retail Price €41.14
29.80
€24.63 excl. VAT
bosch_2608900176

BOSCH 2608900176 Expert hammer drill SDS-Plus-7X, 10pcs 14x200x265mm

  • Diameter: 14 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 265 mm
Delivery time average 9 days.
Recommended Retail Price €326.03
138.95
€114.83 excl. VAT
milwaukee_4932471156

MILWAUKEE 4932471156 SDS-Plus DUST-LOK dust-free drill bit 4-spiral 6x136mm

  • Diameter: 6 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 136 mm
Delivery time average 5 days.
Recommended Retail Price €39.87
19.80
€16.36 excl. VAT
bosch_2608900626

BOSCH 2608900626 Expert universal drill CYL-9 MultiConstruction 10x80x120mm

  • Diameter: 10 mm
  • Drill bit type: Multi-purpose drill bit
  • Overall length: 120 mm
On stock, immediately available.
8.65
€7.15 excl. VAT
bosch_2608900097

BOSCH 2608900097 Expert hammer drill SDS-Plus-7X, 10x100x165mm

  • Diameter: 10 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 165 mm
On stock, immediately available.
9.43
€7.79 excl. VAT
dewalt_dt5026_qz

DEWALT DT5026-QZ IMPACT metal step drill bit 4-12mm

  • Smallest diameter: 4 mm
  • Largest diameter: 12 mm
  • Shank size: 6,35 mm
Delivery time average 16 days.
Recommended Retail Price €83.01
37.60
€31.07 excl. VAT
hikoki_754347

HIKOKI 754347 SDS-Max drill bit 40x920 mm

  • Diameter: 40 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 920 mm
Delivery time average 12 days.
Recommended Retail Price €255.10
137.80
€113.88 excl. VAT
phantom_432400800

PHANTOM 432400800 HSS-E head countersink drill bit DIN 1866 90°' fine fit' core holes M8 6'8x15mm

  • Countersink angle: 90 °
  • Small diameter: 6,8 mm
  • For thread size: M8
Delivery time average 9 days.
58.98
€48.74 excl. VAT
hikoki_780103

HIKOKI 780103 step drill HSS TiAlN 6-30 mm

  • Smallest diameter: 6 mm
  • Largest diameter: 30 mm
  • Shank size: 10 mm
Delivery time average 9 days.
Recommended Retail Price €131.41
82.40
€68.10 excl. VAT
bosch_2608599048

BOSCH 2608599048 diamond box countersink bit with 4 segments 82 x 60 x 10 mm

  • Diameter: 82 mm
Delivery time average 6 days.
Recommended Retail Price €95.51
58.80
€48.59 excl. VAT
carat_eb02230010

CARAT EB02230010 Brilliant concrete drill 22 x 300mm 1/2" wet

  • Diameter: 22 mm
  • Length: 300 mm
  • Connection size (machine): 1/2"
Delivery time average 4 days.
Recommended Retail Price €128.26
102.60
€84.79 excl. VAT
hikoki_754311

HIKOKI 754311 SDS-Max drill bit 20x920 mm

  • Diameter: 20 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 920 mm
Delivery time average 9 days.
Recommended Retail Price €109.29
68.40
€56.53 excl. VAT
hikoki_751609

HIKOKI 751609 drill 19mm hexagon 24x420 mm

  • Diameter: 24 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 420 mm
Delivery time average 9 days.
Recommended Retail Price €69.56
40.95
€33.84 excl. VAT
milwaukee_4932430235

MILWAUKEE 4932430235 SDS-Plus MX4 hammer drill 4-coil 6.5x215mm (10 pcs)

  • Diameter: 6,5 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 215 mm
Delivery time average 8 days.
Recommended Retail Price €172.24
81.80
€67.60 excl. VAT
facom_229tt3

FACOM 229.TT3 conical cutter 90 - 16.5 mm

  • Large diameter: 16,5 mm
  • Countersink angle: 90 °
  • Shank size: 10 mm
On stock, immediately available.
Recommended Retail Price €92.86
58.40
€48.26 excl. VAT
bosch_2608900170

BOSCH 2608900170 Expert hammer drill SDS-Plus-7X, 10pcs 10x100x165mm

  • Diameter: 10 mm
  • Drill bit type: Hammer drill bit
  • Overall length: 165 mm
On stock, immediately available.
Recommended Retail Price €128.14
50.80
€41.98 excl. VAT
pferd_25201043

PFERD STB HSS 04 30/10 HC FEP stepped drill bit HSS with 14 drill stages 4-30 mm three-zone shank 10 mm HICOAT coating - 25201043

  • Smallest diameter: 4 mm
  • Number of steps: 14
  • Largest diameter: 30 mm
Delivery time average 9 days.
134.82
€111.42 excl. VAT
⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.