r: 02791026 p: 18.842 pid: 134471 b: BOSCH q: 0 st: lt: 8 ean: 6949509209887 sr: BOSCH 2608831057 sr_no_br: 2608831057 sr_no_br_cl: 2608831057 sr_cl: BOSCH2608831057 sr_dash: sold: 37.684 p_range: none type: standard act: 1 avo: 1 av: Diameter 22 mm Cutting length 300 mm Drill bit type Hammer drill bit Overall length 350 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 2 ea n: BOSCH 2608831057 hammer drill SDS-Plus-3, 22 x 300 x 350 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-3, 22 x 300 x 350 mm For drilling into concrete Drill bit SDS-Plus-3 for durable drilling into concrete Durable design with 4 spirals effectively removes drilling dust for longer drilling times Advantages The SDS plus-3 drill bit offers durability when drilling into concrete. The durable 4-coil design prevents overheating by effectively removing drilling dust, allowing longer drilling times. The drill bit is made of high-alloy steel produced with optimised hardening technology to be more resistant to wear. For greater resistance, notched cutting edges are made of an ideal carbide mixture from Bosch. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is suitable for drilling in concrete and masonry and fits on rotary hammers with an SDS plus holder. ds: dsc: kts: hammer drill SDS-Plus-3, 22 x 300 x 350 mm kpn: 2608831057 kpn_dash: kpn_clear: 2608831057 bkpn: BOSCH 2608831057 bkpn_clear: BOSCH 2608831057 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608831057 sr_ns: BOSCH2608831057
r: 08071266 p: 18.842 pid: 136638 b: DEWALT q: 0 st: lt: 8 ean: 5035048055786 sr: DEWALT DT9603-QZ sr_no_br: DT9603-QZ sr_no_br_cl: DT9603QZ sr_cl: DEWALTDT9603QZ sr_dash: DEWALT DT9603 sold: 37.684 p_range: KLIUM_PRODUCT_RANGE_204 type: standard act: 1 avo: 1 av: Diameter 22 mm Drill bit type Hammer drill bit Overall length 300 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 2 ea Cutting length 250 mm Product Range Dewalt EXTREME n: DEWALT DT9603-QZ SDS-Plus EXTREME 2 drill bit 22x250x300mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description SDS-Plus drill bit EXTREME 2 22x250x300mm Features Suitable for fast drilling of plug, anchor or passage holes in masonry, stone, concrete and brickwork Optimised mounting shank ensures perfect grip and optimum power transmission, with a hardened steel body for extra strength and less breakage Sturdy cutting head is flanked by two separate cutting tips that deliver fast and efficient drilling speed ds: dsc: kts: SDS-Plus EXTREME 2 drill bit 22x250x300mm kpn: DT9603-QZ kpn_dash: DT9603 kpn_clear: DT9603QZ bkpn: DEWALT DT9603-QZ bkpn_clear: DEWALT DT9603QZ c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Dewalt / Dewalt tools / Dewalt machining tools / Dewalt cutting tools / Dewalt drilling and punching / Dewalt drill bit | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt extreme sr_no_br_cl_ns: DT9603QZ sr_ns: DEWALTDT9603-QZ
r: 02882915 p: 9.421 pid: 119381 b: MILWAUKEE q: 0 st: lt: 6 ean: 4002395349111 sr: MILWAUKEE 4932373326 sr_no_br: 4932373326 sr_no_br_cl: 4932373326 sr_cl: MILWAUKEE4932373326 sr_dash: sold: 37.684 p_range: none type: standard act: 1 avo: 1 av: Diameter 17,5 mm Drill bit type Metal drill bit Overall length 191 mm Shank size 13 mm Shank type Cylindrical - tapered Material (drill bit) HSS-R Standard DIN 338 Number of cutting edges 2 ea Cutting length 130 mm n: MILWAUKEE 4932373326 HSS-R metal drill bit DIN 338 with reduced shank 17.5x191mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description High speed steel rollforged metal drill bits produced according to DIN 338. Oxide coating enables quick swarf removal. Normal point shaped cutting tip with 118° angle. Type N flute normal angle. Suitable for drilling in steel, cast iron, alloyed and non-alloyed material up to 800 N/mm². Colour: black. ds: Milwaukee Accessories Gift Deal Promotion 2026 Receive a €25 gift card when purchasing at least €100 excl. VAT of participating Milwaukee accessories! Promotion valid from 01.09.2026 to 30.09.2026. How does it work? Purchase participating Milwaukee accessories during the promotion period for a minimum of €100 excl. VAT and receive a €25 gift card of your choice . Register your purchase via the official promotion page and upload your invoice. Registration is possible until 14 October 2026 . The invoice date must be between 01.09.2026 and 30.09.2026 . The promotion can be claimed a maximum of 3 times per customer. One gift card is provided per invoice. After approval of your registration, you will receive the digital gift card within 2 working days. The gift card cannot be exchanged or redeemed for cash. The promotion is only valid for purchases with a billing address in the Netherlands, Belgium or Luxembourg. Participating Milwaukee accessories are recognisable by the promotion label on the product page. Click the label to view all participating items. dsc: kts: HSS-R metal drill bit DIN 338 with reduced shank 17.5x191mm kpn: 4932373326 kpn_dash: kpn_clear: 4932373326 bkpn: MILWAUKEE 4932373326 bkpn_clear: MILWAUKEE 4932373326 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee accessories gift deal promotion 2026 sr_no_br_cl_ns: 4932373326 sr_ns: MILWAUKEE4932373326
r: 51630904 p: 12.56 pid: 82780 b: INTERNATIONAL TOOLS q: 1 st: 1 lt: 1 ean: 8716563234012 sr: INTERNATIONAL TOOLS 114131550 sr_no_br: 114131550 sr_no_br_cl: 114131550 sr_cl: INTERNATIONALTOOLS114131550 sr_dash: sold: 37.68 p_range: none type: standard act: 1 avo: 1 av: Diameter 15,5 mm Drill bit type Metal drill bit Overall length 178 mm Shank size 13 mm Shank type Cylindrical - tapered Material (drill bit) HSS Number of cutting edges 2 ea Cutting length 120 mm n: INTERNATIONAL TOOLS 114131550 ECO HSS spiral drill bit rolled' shank 13 mm 15'5 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product Description: International Tools ECO HSS Jobber Drill roll-forged shank 13 mm With reduced shank, roll-forged version, point angle 118° ds: dsc: kts: ECO HSS spiral drill bit rolled' shank 13 mm 15'5 mm kpn: 114131550 kpn_dash: kpn_clear: 114131550 bkpn: INTERNATIONAL TOOLS 114131550 bkpn_clear: INTERNATIONAL TOOLS 114131550 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / International tools / International tools tools / International tools machining tools / International tools cutting tools / International tools drilling and punching / International tools drill bit sr_no_br_cl_ns: 114131550 sr_ns: INTERNATIONALTOOLS114131550
r: 02882960 p: 9.4 pid: 119399 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395371518 sr: MILWAUKEE 4932352493 sr_no_br: 4932352493 sr_no_br_cl: 4932352493 sr_cl: MILWAUKEE4932352493 sr_dash: sold: 37.6 p_range: none type: standard act: 1 avo: 1 av: Diameter 14 mm Drill bit type Wood drill bit Overall length 400 mm Shank size 1/4 inch Shank type Hexagonal Material (drill bit) Chrome-vanadium steel Number of cutting edges 2 ea n: MILWAUKEE 4932352493 flat drill bit FB 14x400mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Fast drilling of big diameters. Suitable for drilling in natural hard and softwood and chipboard. Ideal for door locks, morticing, electrical and plumbing work. 1/4" Hex shank reception (DIN E 6.3) for direct insertion into the power tool or for secure chuck grip. Ground centre point for accurate positioning and sharp wings (not applicable to 6 & 8 mm) for improved cutting performance. ds: Milwaukee Accessories Gift Deal Promotion 2026 Receive a €25 gift card when purchasing at least €100 excl. VAT of participating Milwaukee accessories! Promotion valid from 01.09.2026 to 30.09.2026. How does it work? Purchase participating Milwaukee accessories during the promotion period for a minimum of €100 excl. VAT and receive a €25 gift card of your choice . Register your purchase via the official promotion page and upload your invoice. Registration is possible until 14 October 2026 . The invoice date must be between 01.09.2026 and 30.09.2026 . The promotion can be claimed a maximum of 3 times per customer. One gift card is provided per invoice. After approval of your registration, you will receive the digital gift card within 2 working days. The gift card cannot be exchanged or redeemed for cash. The promotion is only valid for purchases with a billing address in the Netherlands, Belgium or Luxembourg. Participating Milwaukee accessories are recognisable by the promotion label on the product page. Click the label to view all participating items. dsc: kts: flat drill bit FB 14x400mm kpn: 4932352493 kpn_dash: kpn_clear: 4932352493 bkpn: MILWAUKEE 4932352493 bkpn_clear: MILWAUKEE 4932352493 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee accessories gift deal promotion 2026 sr_no_br_cl_ns: 4932352493 sr_ns: MILWAUKEE4932352493
r: 02878377 p: 37.52 pid: 118580 b: MILWAUKEE q: 0 st: lt: 10 ean: 4002395309030 sr: MILWAUKEE 4932307087 sr_no_br: 4932307087 sr_no_br_cl: 4932307087 sr_cl: MILWAUKEE4932307087 sr_dash: sold: 37.52 p_range: none type: standard act: 1 avo: 1 av: Diameter 24 mm Drill bit type Hammer drill bit Overall length 450 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 2 ea Cutting length 400 mm n: MILWAUKEE 4932307087 SDS-Plus M2 hammer drill bit 2-coils 24x450mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Breaker Points. 3 offset aggressive power breakers. These produce a "Demolition" effect and create micro cracks in the drilled material. Up to 25% FASTER Centering tip. Ensures immediate spot drilling with pin point accuracy. Prevents skidding on smooth surfaces Enlarged rebar chamfers. Prevents side tip damage when hitting rebar. Reduces the risk of the drill bit jamming when hitting rebar Tapered shoulder design. Thinner shoulder towards drill tip for less friction providing for greater speed. Ideal for cordless hammers identified from its tapered shoulder geometry Reinforced flute. High volume flute geometry for optimum dust removal. Reinforced flute design (thicker core) gives: - Full power transfer to the tip. - Lower vibrations. - Exceptional break resistance, less breakages and best durability Made in Germany FASTEST: New aggressive tip geometry with 3 chip breakers demolishes the concrete quicker and a tapered shoulder design minimises friction enabling the M2 drill bit to deliver faster drilling speed DURABILITY: Rebar chamfers on the tip prevent side tip damage when hitting metal reinforcement and a thicker core body ensures higher power transfer, lower vibrations and less flute breakages ds: Milwaukee Accessories Gift Deal Promotion 2026 Receive a €25 gift card when purchasing at least €100 excl. VAT of participating Milwaukee accessories! Promotion valid from 01.09.2026 to 30.09.2026. How does it work? Purchase participating Milwaukee accessories during the promotion period for a minimum of €100 excl. VAT and receive a €25 gift card of your choice . Register your purchase via the official promotion page and upload your invoice. Registration is possible until 14 October 2026 . The invoice date must be between 01.09.2026 and 30.09.2026 . The promotion can be claimed a maximum of 3 times per customer. One gift card is provided per invoice. After approval of your registration, you will receive the digital gift card within 2 working days. The gift card cannot be exchanged or redeemed for cash. The promotion is only valid for purchases with a billing address in the Netherlands, Belgium or Luxembourg. Participating Milwaukee accessories are recognisable by the promotion label on the product page. Click the label to view all participating items. dsc: kts: SDS-Plus M2 hammer drill bit 2-coils 24x450mm kpn: 4932307087 kpn_dash: kpn_clear: 4932307087 bkpn: MILWAUKEE 4932307087 bkpn_clear: MILWAUKEE 4932307087 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee accessories gift deal promotion 2026 sr_no_br_cl_ns: 4932307087 sr_ns: MILWAUKEE4932307087
r: 51630931 p: 0.75 pid: 82822 b: INTERNATIONAL TOOLS q: 0 st: lt: 2 ean: 8716563313816 sr: INTERNATIONAL TOOLS 114200250 sr_no_br: 114200250 sr_no_br_cl: 114200250 sr_cl: INTERNATIONALTOOLS114200250 sr_dash: sold: 37.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 2,5 mm Drill bit type Metal drill bit Overall length 57 mm Shank size 2,5 mm Shank type Cylindrical Material (drill bit) HSS Standard DIN 338 Number of cutting edges 2 ea Cutting length 30 mm n: INTERNATIONAL TOOLS 114200250 ECO PRO HSS twist drill bit DIN 338 2'5 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product Description: International Tools ECO PRO HSS Jobber Drill DIN 338 DIN 338, straight shank, ground version, bright finish, point angle 118° ds: dsc: kts: ECO PRO HSS twist drill bit DIN 338 2'5 mm kpn: 114200250 kpn_dash: kpn_clear: 114200250 bkpn: INTERNATIONAL TOOLS 114200250 bkpn_clear: INTERNATIONAL TOOLS 114200250 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / International tools / International tools tools / International tools machining tools / International tools cutting tools / International tools drilling and punching / International tools drill bit sr_no_br_cl_ns: 114200250 sr_ns: INTERNATIONALTOOLS114200250
r: 02883814 p: 3.4 pid: 119480 b: MILWAUKEE q: 0 st: lt: 5 ean: 4002395331369 sr: MILWAUKEE 4932363657 sr_no_br: 4932363657 sr_no_br_cl: 4932363657 sr_cl: MILWAUKEE4932363657 sr_dash: sold: 37.4 p_range: none type: standard act: 1 avo: 1 av: Diameter 9 mm Drill bit type Wood drill bit Overall length 125 mm Shank size 9 mm Shank type Cylindrical Material (drill bit) HSS Standard DIN 7487 E Number of cutting edges 2 ea Cutting length 80 mm n: MILWAUKEE 4932363657 wood drill DIN 7487 E BP 9x125mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Suitable for drilling hardboard, plywood, chipboard and all natural hard and soft wood. Produced according to DIN 7487 E. ds: Milwaukee Accessories Gift Deal Promotion 2026 Receive a €25 gift card when purchasing at least €100 excl. VAT of participating Milwaukee accessories! Promotion valid from 01.09.2026 to 30.09.2026. How does it work? Purchase participating Milwaukee accessories during the promotion period for a minimum of €100 excl. VAT and receive a €25 gift card of your choice . Register your purchase via the official promotion page and upload your invoice. Registration is possible until 14 October 2026 . The invoice date must be between 01.09.2026 and 30.09.2026 . The promotion can be claimed a maximum of 3 times per customer. One gift card is provided per invoice. After approval of your registration, you will receive the digital gift card within 2 working days. The gift card cannot be exchanged or redeemed for cash. The promotion is only valid for purchases with a billing address in the Netherlands, Belgium or Luxembourg. Participating Milwaukee accessories are recognisable by the promotion label on the product page. Click the label to view all participating items. dsc: kts: wood drill DIN 7487 E BP 9x125mm kpn: 4932363657 kpn_dash: kpn_clear: 4932363657 bkpn: MILWAUKEE 4932363657 bkpn_clear: MILWAUKEE 4932363657 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee accessories gift deal promotion 2026 sr_no_br_cl_ns: 4932363657 sr_ns: MILWAUKEE4932363657
r: 02883307 p: 37.355 pid: 117334 b: MILWAUKEE q: 0 st: lt: 7 ean: 0045242501014 sr: MILWAUKEE 48136766 sr_no_br: 48136766 sr_no_br_cl: 48136766 sr_cl: MILWAUKEE48136766 sr_dash: sold: 37.355 p_range: none type: standard act: 1 avo: 1 av: Diameter 26 mm Drill bit type Wood drill bit Overall length 460 mm Shank size 11 mm Shank type Hexagonal Material (drill bit) Chrome-vanadium steel Number of cutting edges 1 ea Cutting length 395 mm n: MILWAUKEE 48136766 impact wood drill long IAD 26x460mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Suitable for use with all types of corded / cordless drills including impact wrenches. Drilling with an impact wrench enables drilling holes with less effort, one hand drilling, drilling up a ladder and above head height with less risk of injury from the tool clutching out. Special zone hardening process ensures an extra hard shank, durable tip and perfectly flexible bit body. New MILWAUKEE Through-Center head geometry with the lead cutting edge lines up with the center of the feed screw - this ensures efficient chip removal and allows for continuous feeding. 20° rake angle of the lead cutting edge creates a path for easy chip ejection. Polished and powder coated flute design produces a non-stick surface for increased chip ejection, reduced chip clogging and higher selfeeding capability. Milling marks are removed in the finishing process, creating a smooth surface. Lewis flute with large, wide throat design for rapid chip removal. Sharp ground cutting lips for smooth clean holes. Resharpenable cutting lips. With 7/16" shank - to fit square drive 1/2" impact wrenches the adaptor 48660061 is required. Suitable for hard & soft wood, wet & treated wood, plywood, chipboard, WPC (wood plastic composite), laminated beams and panels, exotic and hard woods e.g. bongossi, iroko, teak, beech, oak, etc. ds: Milwaukee Accessories Gift Deal Promotion 2026 Receive a €25 gift card when purchasing at least €100 excl. VAT of participating Milwaukee accessories! Promotion valid from 01.09.2026 to 30.09.2026. How does it work? Purchase participating Milwaukee accessories during the promotion period for a minimum of €100 excl. VAT and receive a €25 gift card of your choice . Register your purchase via the official promotion page and upload your invoice. Registration is possible until 14 October 2026 . The invoice date must be between 01.09.2026 and 30.09.2026 . The promotion can be claimed a maximum of 3 times per customer. One gift card is provided per invoice. After approval of your registration, you will receive the digital gift card within 2 working days. The gift card cannot be exchanged or redeemed for cash. The promotion is only valid for purchases with a billing address in the Netherlands, Belgium or Luxembourg. Participating Milwaukee accessories are recognisable by the promotion label on the product page. Click the label to view all participating items. dsc: kts: impact wood drill long IAD 26x460mm kpn: 48136766 kpn_dash: kpn_clear: 48136766 bkpn: MILWAUKEE 48136766 bkpn_clear: MILWAUKEE 48136766 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee drilling and punching / Milwaukee drill bit | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee accessories gift deal promotion 2026 sr_no_br_cl_ns: 48136766 sr_ns: MILWAUKEE48136766
r: 08058422 p: 37.355 pid: 112159 b: HIKOKI q: 0 st: lt: 8 ean: 8717574026627 sr: HIKOKI 754319 sr_no_br: 754319 sr_no_br_cl: 754319 sr_cl: HIKOKI754319 sr_dash: sold: 37.355 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Drill bit type Hammer drill bit Overall length 320 mm Shank type SDS-max Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 200 mm n: HIKOKI 754319 SDS-Max drill bit 25x320 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Unrivalled cutting power: extremely robust and aggressive Consistently long service life: solid carbide arranged in an optimal 4 x 90° symmetry with large dust channels for easy removal of drilling dust and minimal heat build-up Highest drilling speed: short helical inserts and the high-volume helix ensure optimum removal of drilling dust during aggressive drilling Optimal centring: active centring point for optimum guidance when drilling into concrete and reinforced concrete Precise borehole diameters: innovative wear indicator (dimension stability indicator) Vibration damping: improved vibration levels - ideal for the toughest applications on the building site For use in concrete, masonry and natural stone ds: dsc: kts: SDS-Max drill bit 25x320 mm kpn: 754319 kpn_dash: kpn_clear: 754319 bkpn: HIKOKI 754319 bkpn_clear: HIKOKI 754319 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Hikoki / Hikoki tools / Hikoki machining tools / Hikoki cutting tools / Hikoki drilling and punching / Hikoki drill bit sr_no_br_cl_ns: 754319 sr_ns: HIKOKI754319
r: 08127599 p: 18.677 pid: 173275 b: BOSCH q: 0 st: lt: 8 ean: 4059952684215 sr: BOSCH 2608901834 sr_no_br: 2608901834 sr_no_br_cl: 2608901834 sr_cl: BOSCH2608901834 sr_dash: sold: 37.354 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 30 mm Drill bit type Wood drill bit Overall length 88 mm Shank size 8 Shank type Cylindrical - 3 clamping flats Material (drill bit) Solid carbide Surface treatment (drill bit) Bright Number of cutting edges 2 ea Cutting length 56 mm Product Range Bosch Expert n: BOSCH 2608901834 EXPERT Wood Forstner drill bit 30mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Lasts up to 3x longer than a standard Bosch Forstner drill bit Long service life when drilling in wood Bosch Tip Technology ensures long life and a fast drilling process. The drills use an advanced design to make work as smooth and efficient as possible. Drill holes accurately with the specially designed centring tip. This allows you to drill accurately every time, work efficiently and make hundreds of clean holes. Wavy cutting edge with sharp serrations ensures clean cuts and reduces heat generation. 3-surface shank prevents slipping in the chuck of drilling and screwdriving machines Product highlights Forstner drills are great accessories for making larger holes in wood, but not every Forstner drill bit will help you drill clean holes. We designed the EXPERT Wood to make sure you get perfectly accurate, splinter-free blind holes in all types of wood. Equipment and application We designed the EXPERT Wood's wave-shaped cutting edge using Bosch Tip Technology to provide professional, exceptionally accurate and durable Forstner drills for hard wood and soft wood. The wavy edge with sharp serrations combines the advantages of the continuous and serrated edge: it drills clean, splinter-free holes exactly when you need them - without overheating. Additional information Whether you need to make splinter-free, clean blind holes for door hinges, countersink drills or any other woodworking application, the EXPERT wood punch drill bit will help you get the job done with confidence and ease. The strong and sharp wavy cutting edge, designed using Bosch Tip Technology, makes it effective and durable in both hard wood and soft wood. ds: dsc: kts: EXPERT Wood Forstner drill bit 30mm kpn: 2608901834 kpn_dash: kpn_clear: 2608901834 bkpn: BOSCH 2608901834 bkpn_clear: BOSCH 2608901834 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608901834 sr_ns: BOSCH2608901834
r: 02938188 p: 18.677 pid: 73220 b: BAHCO q: 0 st: lt: 7 ean: 7314150388851 sr: BAHCO 9626-11 sr_no_br: 9626-11 sr_no_br_cl: 962611 sr_cl: BAHCO962611 sr_dash: BAHCO 9626 sold: 37.354 p_range: none type: standard act: 1 avo: 1 av: Diameter 11 mm Drill bit type Wood drill bit Overall length 230 mm Shank size 1/4 inch Shank type Hexagonal Material (drill bit) Chrome-vanadium steel Number of cutting edges 1 ea Cutting length 155 mm n: BAHCO 9626-11 snake drill for wood 11 mm x 230 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description: Hose drill for wood Features: Hose drill bit for drilling into wood One part of the pliers has a hexagonal shank for firm grip in the drill chuck, additional piece of 15 mm long with four flat sides, suitable for hand brackets Lacquered for rust protection Spirals with Levin pattern Made of chrome vanadium steel (CrV) Full heat treatment for extreme durability Hose drills are easy to use and are very suitable for thick wood Easy to use in handheld machines Screw tip pulls the drill bit through the workpiece and the large grooves help remove chips and dust ds: dsc: kts: snake drill for wood 11 mm x 230 mm kpn: 9626-11 kpn_dash: 9626 kpn_clear: 962611 bkpn: BAHCO 9626-11 bkpn_clear: BAHCO 962611 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bahco / Bahco tools / Bahco machining tools / Bahco cutting tools / Bahco drilling and punching / Bahco drill bit sr_no_br_cl_ns: 962611 sr_ns: BAHCO9626-11
r: 08051791 p: 7.46 pid: 136948 b: BOSCH q: 1 st: 1 lt: 1 ean: 4059952534039 sr: BOSCH 2608900329 sr_no_br: 2608900329 sr_no_br_cl: 2608900329 sr_cl: BOSCH2608900329 sr_dash: sold: 37.3 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 38 mm Drill bit type Wood drill bit Overall length 152 mm Shank size 1/4 inch Shank type Hexagonal Material (drill bit) Chrome-vanadium steel Number of cutting edges 2 ea Product Range Bosch Expert n: BOSCH 2608900329 Expert speed drill Self Cut Speed, hexagonal shank 38 x 152 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Speed Drill Self Cut Speed, hex shank 38 x 152 mm Up to 3x faster than a 2609255269 speed drill bit from Bosch Fast drilling is easy with Bosch Tip Technology 1/4-inch hexagonal shank for use with three-claw drill chucks and hexagonal drill/screwdriver chucks. Advantages Up to 3x faster than a 2609255269 speed drill bit from Bosch - Speed drills are a great accessory for electricians and other installers and builders. What if they could be even faster and more efficient? With Bosch Tip Technology, it is possible. The EXPERT Self Cut Speed features the most advanced designs for speed drills, making it easy to use and very practical for professionals who need to do tough jobs. The patented Bosch screw tip brings the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. The Bosch EXPERT Self Cut Speed drill offers efficiency and convenience to professionals who need to drill holes for cabling, pipes and other hardware installations. The drill also works perfectly in all types of softwood. 1/4-inch hex shank for use with three-claw drill chucks and hex drill/screw machine chucks. Drilling in wood at maximum speedThe Expert SelfCut Speed features the most advanced designs for speed drilling, making it easy to use and very practical for professionals with tough jobs. The patented Bosch screw tip takes the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert speed drill Self Cut Speed, hexagonal shank 38 x 152 mm kpn: 2608900329 kpn_dash: kpn_clear: 2608900329 bkpn: BOSCH 2608900329 bkpn_clear: BOSCH 2608900329 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900329 sr_ns: BOSCH2608900329
r: 51632448 p: 12.4 pid: 83041 b: PHANTOM q: 0 st: lt: 8 ean: 8716563324898 sr: PHANTOM 119200301 sr_no_br: 119200301 sr_no_br_cl: 119200301 sr_cl: PHANTOM119200301 sr_dash: sold: 37.2 p_range: none type: standard act: 1 avo: 1 av: Diameter 3 mm Material (drill bit) HSS Cutting length 100 mm Standard DIN 1869 Number of cutting edges 2 ea Shank type Cylindrical Shank size 3 mm Overall length 150 mm Drill bit type Metal drill bit n: PHANTOM 119200301 HSS spiral drill bit DIN 1869 type TS 3x150x100 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product Description: Phantom HSS Twist drill DIN 1869 DIN 1869, type TS, straight shank, extra long series, with split point, point angle 130°, for deep-hole drilling ds: dsc: kts: HSS spiral drill bit DIN 1869 type TS 3x150x100 mm kpn: 119200301 kpn_dash: kpn_clear: 119200301 bkpn: PHANTOM 119200301 bkpn_clear: PHANTOM 119200301 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Phantom / Phantom tools / Phantom machining tools / Phantom cutting tools / Phantom drilling and punching / Phantom drill bit sr_no_br_cl_ns: 119200301 sr_ns: PHANTOM119200301
r: 08070315 p: 3.1 pid: 134672 b: DEWALT q: 0 st: lt: 9 ean: 5054905288181 sr: DEWALT DT20513-QZ sr_no_br: DT20513-QZ sr_no_br_cl: DT20513QZ sr_cl: DEWALTDT20513QZ sr_dash: DEWALT DT20513 sold: 37.2 p_range: none type: standard act: 1 avo: 1 av: Diameter 2,5 mm Cutting length 30 mm Drill bit type Metal drill bit Overall length 57 mm Shank size 2,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) Gold Number of cutting edges 2 ea n: DEWALT DT20513-QZ Black & Gold metal drill bit 2.5mm (3 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description 2.5MM BLACK GOLD HSS DRILL BIT 3PCS Features 135° Split point tip design to help reduce walking High Speed Steel to be used in plastic, wood, and metal Tapered web design for extreme durability and resisting breakage Black and gold coating to help prevent rust and wear 3-Flats shank to reduce spin-out in the chuck ds: dsc: kts: Black & Gold metal drill bit 2.5mm (3 pcs) kpn: DT20513-QZ kpn_dash: DT20513 kpn_clear: DT20513QZ bkpn: DEWALT DT20513-QZ bkpn_clear: DEWALT DT20513QZ c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Dewalt / Dewalt tools / Dewalt machining tools / Dewalt cutting tools / Dewalt drilling and punching / Dewalt drill bit sr_no_br_cl_ns: DT20513QZ sr_ns: DEWALTDT20513-QZ
r: 08127591 p: 12.355 pid: 173263 b: BOSCH q: 0 st: lt: 8 ean: 4059952684130 sr: BOSCH 2608901826 sr_no_br: 2608901826 sr_no_br_cl: 2608901826 sr_cl: BOSCH2608901826 sr_dash: sold: 37.065 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 18 mm Drill bit type Wood drill bit Overall length 88 mm Shank size 8 Shank type Cylindrical - 3 clamping flats Material (drill bit) Solid carbide Surface treatment (drill bit) Bright Number of cutting edges 2 ea Cutting length 56 mm Product Range Bosch Expert n: BOSCH 2608901826 EXPERT Wood Forstner drill bit 18mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Lasts up to 3x longer than a standard Bosch Forstner drill bit Long service life when drilling in wood Bosch Tip Technology ensures long life and a fast drilling process. The drills use an advanced design to make work as smooth and efficient as possible. Drill holes accurately with the specially designed centring tip. This allows you to drill accurately every time, work efficiently and make hundreds of clean holes. Wavy cutting edge with sharp serrations ensures clean cuts and reduces heat generation. 3-surface shank prevents slipping in the chuck of drilling and screwdriving machines Product highlights Forstner drills are great accessories for making larger holes in wood, but not every Forstner drill bit will help you drill clean holes. We designed the EXPERT Wood to make sure you get perfectly accurate, splinter-free blind holes in all types of wood. Equipment and application We designed the EXPERT Wood's wave-shaped cutting edge using Bosch Tip Technology to provide professional, exceptionally accurate and durable Forstner drills for hard wood and soft wood. The wavy edge with sharp serrations combines the advantages of the continuous and serrated edge: it drills clean, splinter-free holes exactly when you need them - without overheating. Additional information Whether you need to make splinter-free, clean blind holes for door hinges, countersink drills or any other woodworking application, the EXPERT wood punch drill bit will help you get the job done with confidence and ease. The strong and sharp wavy cutting edge, designed using Bosch Tip Technology, makes it effective and durable in both hard wood and soft wood. ds: dsc: kts: EXPERT Wood Forstner drill bit 18mm kpn: 2608901826 kpn_dash: kpn_clear: 2608901826 bkpn: BOSCH 2608901826 bkpn_clear: BOSCH 2608901826 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608901826 sr_ns: BOSCH2608901826
