r: 03398802 p: 313.021 pid: 178057 b: FLUKE q: 14 st: 1 lt: 1 ean: 0095969623766 sr: FLUKE 5065866 sr_no_br: 5065866 sr_no_br_cl: 5065866 sr_cl: FLUKE5065866 sr_dash: sold: 3756.252 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 325 True RMS current clamp - 5065866 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 323, 324 and 325, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 325 also offers measurement functions for DC current and frequency. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC and DC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kOhm with loop-through test Temperature and capacitance measurement Frequency measurement ds: dsc: Scope of delivery 325 True-RMS current clamp Measurement leads Carrying case User manual kts: True RMS current clamp kpn: 325 kpn_dash: kpn_clear: 325 bkpn: FLUKE 325 bkpn_clear: FLUKE 325 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5065866 sr_ns: FLUKE5065866
r: 02957547 p: 3754.343 pid: 71341 b: FLUKE q: 0 st: lt: 8 ean: 0095969801942 sr: FLUKE 4706548 sr_no_br: 4706548 sr_no_br_cl: 4706548 sr_cl: FLUKE4706548 sr_dash: sold: 3754.343 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1732/EUS three-phase energy logger with current probes - 4706548 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1732 energy logger Power supply Voltage test cables Crocodile clips (4x) 1500A flexible current clamp of 30.5 cm (3x) Carrying case Energy Analyze Plus software Cables Colour coding set Documentation on USB memory kts: three-phase energy logger with current probes kpn: 1732/EUS kpn_dash: kpn_clear: 1732EUS bkpn: FLUKE 1732/EUS bkpn_clear: FLUKE 1732EUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706548 sr_ns: FLUKE4706548
r: 02951461 p: 3610.087 pid: 71107 b: FLUKE q: 0 st: lt: 39 ean: 0095969815123 sr: FLUKE 4756054 sr_no_br: 4756054 sr_no_br_cl: 4756054 sr_cl: FLUKE4756054 sr_dash: sold: 3610.087 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 125B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4756054 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 125B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe i400s AC current clamp Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 125B/EU/S kpn_dash: kpn_clear: 125BEUS bkpn: FLUKE 125B/EU/S bkpn_clear: FLUKE 125BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4756054 sr_ns: FLUKE4756054
r: 02602593 p: 184.089 pid: 156608 b: MITUTOYO q: 7 st: 1 lt: 1 ean: 4946368667850 sr: MITUTOYO 500-151-30 sr_no_br: 500-151-30 sr_no_br_cl: 50015130 sr_cl: MITUTOYO50015130 sr_dash: MITUTOYO 500 sold: 3497.691 p_range: none type: standard act: 1 avo: 1 av: Measuring range 150 mm Reading 0,01 mm mm Jaws length 40 mm n: MITUTOYO 500-151-30 Digimatic caliper with roller knob and data output 0-150 mm cn: CALIPER cn2: CALIPER cn_clear: CALIPER d: Product description: These Digimatic calipers enable reliable measurement and offer you the following benefits: Now equipped with the same AOS (Advanced Onsite Sensor) induction model encoder used in the top-end ABS coolant-proof calipers. Thanks to the adoption of the electromagnetic induction model ABS encoder, this caliper can be used without worrying about contamination on the ruler during measurement. The detection signal is not affected by dirt (water, oil, etc.) on the surface of the ruler. The guide provides smooth, stable and easy use. Character height: 9 mm (reduction of fatigue due to the high-contrast LCD). The ABS (ABSOLUTE) ruler does not require zeroing after switching on, nor does it have a limited response speed. Exceptionally long battery life. ds: dsc: kts: Digimatic caliper with roller knob and data output 0-150 mm kpn: 500-151-30 kpn_dash: 500 kpn_clear: 50015130 bkpn: MITUTOYO 500-151-30 bkpn_clear: MITUTOYO 50015130 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Caliper | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo caliper sr_no_br_cl_ns: 50015130 sr_ns: MITUTOYO500-151-30
r: 02958466 p: 1740.188 pid: 71456 b: FLUKE q: 0 st: lt: 15 ean: 0095969686402 sr: FLUKE 4387857 sr_no_br: 4387857 sr_no_br_cl: 4387857 sr_cl: FLUKE4387857 sr_dash: sold: 3480.376 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 712B/EN RTD temperature calibrator - 4387857 cn: TEMPERATURE CALIBRATOR cn2: TEMPERATURE CALIBRATOR cn_clear: TEMPERATURECALIBRATOR d: Product description: For the temperature calibration professional who wants a highly accurate, easy-to-use, single-function RTD temperature calibrator, the Fluke 712B is the ideal test instrument. Key features The 712B RTD calibrator can measure and simulate the resistance of (13) different types of RTD?s. Measure signals from 4 to 20 mA and generate a temperature signal at the same time Integrally designed suspension system included with each instrument Configurable 0% and 100% source settings for quick linearity checks in 25% increments Linear rise function and automatic rise function in 25% increments based on 0% and 100% settings Two inputs and backlit display for easy interpretation of measured values Switch-off settings are remembered at switch-on for quick restart of tests 1-year and 2-year specifications plus traceable calibration certificate ds: dsc: Scope of delivery Fluke 712B temperature calibrator Magnetic suspension system Batteries Manual Traceable calibration certificate Measurement leads kts: RTD temperature calibrator kpn: 712B/EN kpn_dash: kpn_clear: 712BEN bkpn: FLUKE 712B/EN bkpn_clear: FLUKE 712BEN c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature calibrator sr_no_br_cl_ns: 4387857 sr_ns: FLUKE4387857
r: 03056906 p: 3470.204 pid: 157168 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368760605 sr: MITUTOYO 518-244 sr_no_br: 518-244 sr_no_br_cl: 518244 sr_cl: MITUTOYO518244 sr_dash: MITUTOYO 518 sold: 3470.204 p_range: none type: standard act: 1 avo: 1 av: Max. measuring value 350 mm Reading 0,001 mm mm n: MITUTOYO 518-244 height gauge with air base 0-350mm 0.001/0.005mm cn: HEIGHT GAUGE cn2: HEIGHT GAUGE cn_clear: HEIGHTGAUGE d: Product description Features high accuracy, high resolution ABSOLUTE linear encoder for position detection. Models with and without pneumatic drive mechanism. Automatic running of preentered part programs. Easy implementation of regularly used measurements, such as inside/outside diameter and pitch dimensions, with icon-based commands that also support simple 1-button operations. Very long battery life. GO/NG assessment is performed by setting upper and lower tolerances. ds: dsc: kts: height gauge with air base 0-350mm 0.001/0.005mm kpn: 518-244 kpn_dash: 518 kpn_clear: 518244 bkpn: MITUTOYO 518-244 bkpn_clear: MITUTOYO 518244 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Height gauge | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo height gauge sr_no_br_cl_ns: 518244 sr_ns: MITUTOYO518-244
r: 02839968 p: 113.801 pid: 116464 b: MILWAUKEE q: 0 st: lt: 18 ean: 4002395282159 sr: MILWAUKEE 4933451906 sr_no_br: 4933451906 sr_no_br_cl: 4933451906 sr_cl: MILWAUKEE4933451906 sr_dash: sold: 3414.03 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Optical ratio 10:1 Power supply 1 x E Max. temperature 330 °C n: MILWAUKEE 2267-40 infrared temperature gun 10:1 (2x AA battery) - 4933451906 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description 10:1 distance to spot ratio, a 1 m spot from 10 m away Up to -30°C to 400°C temperature range Premium LCD display for high readability Simplified buttons and setup for faster scanning Raised overmolding protects lens and screen from direct impact ds: dsc: Supplied as standard 1 x 9V Block Battery Batteries No kitbox or bag supplied kts: infrared temperature gun 10:1 (2x AA battery) kpn: 2267-40 kpn_dash: 2267 kpn_clear: 226740 bkpn: MILWAUKEE 2267-40 bkpn_clear: MILWAUKEE 226740 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee measuring and inspection technique / Milwaukee digital measuring and inspection instruments / Milwaukee digital measuring instruments / Milwaukee temperature gun sr_no_br_cl_ns: 4933451906 sr_ns: MILWAUKEE4933451906
r: 02466193 p: 198.138 pid: 154494 b: MITUTOYO q: 0 st: lt: 4 ean: 4946368672908 sr: MITUTOYO 293-240-30 sr_no_br: 293-240-30 sr_no_br_cl: 29324030 sr_cl: MITUTOYO29324030 sr_dash: MITUTOYO 293 sold: 3368.346 p_range: none type: standard act: 1 avo: 1 av: Micrometer type Outside micrometer Min. measuring value 0 mm Max. measuring value 25 mm Reading 0,001 mm mm n: MITUTOYO 293-240-30 Digimatic micrometer gauge IP65 - 0-25mm without data output cn: MICROMETER cn2: MICROMETER cn_clear: MICROMETER d: Product description: This screw gauge offers excellent accuracy, with and without data input and is very robust. The Digimatic screw gauge IP65, offers you the following advantages: Excellent accuracy with only ±1µm instrument error (models with measuring range smaller than 75mm). ds: dsc: kts: Digimatic micrometer gauge IP65 - 0-25mm without data output kpn: 293-240-30 kpn_dash: 293 kpn_clear: 29324030 bkpn: MITUTOYO 293-240-30 bkpn_clear: MITUTOYO 29324030 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Micrometer | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo micrometer sr_no_br_cl_ns: 29324030 sr_ns: MITUTOYO293-240-30
r: 41010520 p: 824.089 pid: 153682 b: MITUTOYO q: 0 st: lt: 4 ean: 4946368090498 sr: MITUTOYO 500-500-10 sr_no_br: 500-500-10 sr_no_br_cl: 50050010 sr_cl: MITUTOYO50050010 sr_dash: MITUTOYO 500 sold: 3296.356 p_range: none type: standard act: 1 avo: 1 av: Measuring range 450 mm Reading 0,01 mm mm Jaws length 90 mm n: MITUTOYO 500-500-10 Digimatic caliper with data output 0-450 mm cn: CALIPER cn2: CALIPER cn_clear: CALIPER d: Product description: This is a standard model high-capacity Digimatic caliper that offers you the following benefits: Robust design for large measuring ranges, up to 1000mm. ABSOLUTE system delivers reliable measurements. ds: dsc: kts: Digimatic caliper with data output 0-450 mm kpn: 500-500-10 kpn_dash: 500 kpn_clear: 50050010 bkpn: MITUTOYO 500-500-10 bkpn_clear: MITUTOYO 50050010 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Caliper | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo caliper sr_no_br_cl_ns: 50050010 sr_ns: MITUTOYO500-500-10
r: 02627197 p: 109.047 pid: 156124 b: MITUTOYO q: 0 st: lt: 5 ean: 4946368667775 sr: MITUTOYO 500-184-30 sr_no_br: 500-184-30 sr_no_br_cl: 50018430 sr_cl: MITUTOYO50018430 sr_dash: MITUTOYO 500 sold: 3271.41 p_range: none type: standard act: 1 avo: 1 av: Measuring range 150 mm Reading 0,01 mm mm Jaws length 40 mm n: MITUTOYO 500-184-30 Digimatic caliper with round depth measurement 0-150 mm cn: CALIPER cn2: CALIPER cn_clear: CALIPER d: Product description: These Digimatic calipers enable reliable measurement and offer you the following benefits: Now equipped with the same AOS (Advanced Onsite Sensor) induction model encoder used in the top-end ABS coolant-proof calipers. Thanks to the adoption of the electromagnetic induction model ABS encoder, this caliper can be used without worrying about contamination on the ruler during measurement. The detection signal is not affected by dirt (water, oil, etc.) on the surface of the ruler. The guide provides smooth, stable and easy use. Character height: 9 mm (reduction of fatigue due to the high-contrast LCD). The ABS (ABSOLUTE) ruler does not require zeroing after switching on, nor does it have a limited response speed. Exceptionally long battery life. ds: dsc: kts: Digimatic caliper with round depth measurement 0-150 mm kpn: 500-184-30 kpn_dash: 500 kpn_clear: 50018430 bkpn: MITUTOYO 500-184-30 bkpn_clear: MITUTOYO 50018430 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Caliper | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo caliper sr_no_br_cl_ns: 50018430 sr_ns: MITUTOYO500-184-30
r: 01040103 p: 812.401 pid: 95013 b: FLUKE q: 0 st: lt: 6 ean: 0095969400374 sr: FLUKE 2837806 sr_no_br: 2837806 sr_no_br_cl: 2837806 sr_cl: FLUKE2837806 sr_dash: sold: 3249.604 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Max. temperature 800 °C Optical ratio 50:1 Power supply 2 x AA Accuracy ± 1 °C n: FLUKE 568 infrared thermometer (from -40°C to +800°C) - 2837806 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: Combined infrared and contact thermometers with an innovative dot matrix display. With a simple 3-button on-screen menu interface, the Fluke 568 and 566 digital laser thermometers make even complex measurements easy. With just a few button presses, you can quickly navigate through advanced functions to set emissivity, start data logging, or turn alarms on and off. With their rugged, user-friendly and ergonomic design, the Fluke 568 and 566 combined contact and non-contact thermometers stand up well to rough handling in industrial, electrical and mechanical environments. These instruments can do more than other infrared thermometers (or pyrometers), allowing you to work more efficiently in more applications. Key features Measuring range of -40 °C to 800 °C /-40 °F to 1472 °F (568) or -40 °C to 650 °C/-40 °F to 1202 °F (566) Advanced functions are easily accessible via soft-key buttons and dot-matrix display Measure smaller objects from a greater distance with a distance to measurement surface ratio of 50:1 (568) or 30:1 (566) Compatibility with all standard type K thermocouples with mini connector means you can continue to benefit from your thermocouple investment Emissivity adjustment function with pre-installed material table allows you to make measurements on a wide variety of surfaces with complete confidence Record multiple data points (up to 99 for the 568 and 20 for the 566), which can be downloaded for later retrieval Easy adjustment to prevailing lighting conditions through two-level backlighting Audible and visual alarms immediately warn of readings outside set limits Trace problems quickly with the MIN, MAX, AVG and DIF functions Make direct contact thermometer measurements with the included Type K thermocouple Solve problems confidently with a measurement accuracy of 1 %. Versatile interface with 6 languages to choose from ds: dsc: Scope of delivery Fluke 568 infrared and contact thermometer Thermocouple probe K Durable hard case 2 AA batteries Quick start guide in 6 languages USB cable FlukeView Forms software on CD User Manual on CD in 6 languages (English, Spanish, French, German, Portuguese and Simplified Chinese) 2 year warranty kts: infrared thermometer (from -40°C to +800°C) kpn: 568 kpn_dash: kpn_clear: 568 bkpn: FLUKE 568 bkpn_clear: FLUKE 568 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 2837806 sr_ns: FLUKE2837806
r: 02136645 p: 648.487 pid: 95620 b: FLUKE q: 5 st: 1 lt: 1 ean: 0095969586740 sr: FLUKE 3947864 sr_no_br: 3947864 sr_no_br_cl: 3947864 sr_cl: FLUKE3947864 sr_dash: sold: 3242.435 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87-5/E2K True-RMS digital multimeter kit for industrial use - 3947864 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: This new combination kit is based on the Fluke 87V and includes special accessories that allow faults in industrial machines to be located even more efficiently. Accuracy and diagnostic functions for optimal industrial productivity The new Fluke 87 V has improved measurement and troubleshooting functions, higher resolution and greater accuracy for troubleshooting even more faults in motor drives, business automation, power distribution and electromechanical equipment. The 80 Series V shares many similarities with the classic 80 Series, but offers more troubleshooting capabilities, even greater safety, even more ease of use and better protection against impacts. The new 80 Series V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. Key features A unique function for accurate voltage and frequency measurements at variable speed drives and other equipment causing electrical disturbances (87 V). A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (87 V). Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. Thanks to the large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Electrical safety All inputs are protected in accordance with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks associated with current surges and spikes. Accurate measurement of complex signals Until now, there was no multimeter that could accurately measure AC drives. But the new Fluke 87V is specifically designed to handle such complex signals. Imagine the potential productivity gains achieved when troubleshooting drive systems is no longer a matter of guesswork. The measurements are correct every time. A unique feature for accurate measurements of pulse-width modulated AC voltage with noise. Measure accurately at the ASD and motor terminals Measure frequency (motor speed) accurately. The frequency measurement is not affected by the frequency of the ASD carrier Measure the AC current with an optional current clamp Compare the reading of the 87 V with the display on the ASD Special shielding blocks high-frequency noise and voltage generated by large drive systems ds: dsc: Scope of delivery 87 V multimeter TL224 silicone measuring leads AC220 Long Reach crocodile clips TP238 measuring probes magnet and strap 80BK temperature measuring probe holster 9 V battery (fitted) kts: True-RMS digital multimeter kit for industrial use kpn: 87-5/E2K kpn_dash: 87 kpn_clear: 875E2K bkpn: FLUKE 87-5/E2K bkpn_clear: FLUKE 875E2K c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947864 sr_ns: FLUKE3947864
r: 02954128 p: 1587.066 pid: 71468 b: FLUKE q: 0 st: lt: 10 ean: 0095969781817 sr: FLUKE 4604605 sr_no_br: 4604605 sr_no_br_cl: 4604605 sr_cl: FLUKE4604605 sr_dash: sold: 3174.132 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789 process meter with IR 3000 FC connector - 4604605 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: Now compatible with Fluke Connect app The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. This instrument combines the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and Fluke Connect's wireless data logging capabilities with ShareLive video call function (sold separately), process engineers can now do much more while carrying much less. And with the built-in, selectable 250-ohm HART resistor, there's no need to carry a separate resistor either. Features of the Fluke 789 24V loop power supply Very large dual display Improved backlight with 2 brightness settings Max. permissible load resistance 1200 ohms at mA-source Heart mode setting with loop power supply and built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA generation for a quick 'span check' (checking zero and full scale) Externally accessible fuses that are easy to replace Infrared port for processing data in the FlukeView Forms software (V2.1) The Fluke 789 also has the following features of the Fluke 787 Accurate digital True-RMS multimeter, 1000 V, 440 mA DC voltage accuracy of 0.1% DC current measurement with 0.05% accuracy Frequency measurement up to 20 kHz Min/Max/Average/Hold/Relative modes Diode and through-bell test Simultaneous display of mA and % scale 20 mA DC current source / loop calibrator / simulator Manual step function (100%, 25%, coarse, fine) plus automatic step and rise functions Externally accessible battery that can be easily replaced Safety standards Meets standards 1000 volts EN61010-1 CAT III and 600 volts EN61010-1 CAT IV. ds: dsc: Scope of delivery Fluke 789 ProcessMeter IR3000 FC connector AC175 alligator clips Four (4) AA 1.5V alkaline batteries (installed) TL71 set of safety measuring leads kts: process meter with IR 3000 FC connector kpn: 789 kpn_dash: kpn_clear: 789 bkpn: FLUKE 789 bkpn_clear: FLUKE 789 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4604605 sr_ns: FLUKE4604605
r: 03045118 p: 630.53 pid: 72391 b: FLUKE q: 0 st: lt: 6 ean: 0095969679329 sr: FLUKE 4370598 sr_no_br: 4370598 sr_no_br_cl: 4370598 sr_cl: FLUKE4370598 sr_dash: sold: 3152.65 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 179 IMSK service kit industrial multimeter - 4370598 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description A True-RMS multimeter equipped with all functions, combined with a rugged, reliable True-RMS current clamp in basic design Ideal for fault finding in electrical and electronic systems Measurements up to 1000 V AC or DC (179 DMM) and up to 400 A AC (323 clamp) This set combines the Fluke 179 True-RMS DMM and the Fluke 323 True RMS current clamp. Both tools are rugged, reliable and accurate, and extremely easy to use. Fluke 179 True-RMS digital multimeter The Fluke 179 is the preferred solution for professional technicians worldwide. This tool includes all the features you need for troubleshooting and repair of electrical and electronic systems Features accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode testing Increases productivity with manual and automatic range setting, display hold, auto hold and min/max recording Built-in thermometer lets you take temperature measurements without having to carry a separate instrument Fluke 323 True-RMS Current Clamp The Fluke 323 current clamp offers True-RMS measurements, optimal ergonomics and a large display for efficient troubleshooting. It can perform in the most demanding environments and delivers noise-free, reliable readings, so you can diagnose problems almost anywhere with confidence. Robust, reliable True RMS current clamp in basic version for measuring current up to 400 A Measures AC current up to 400 A Measures AC voltage and DC voltage up to 600 V Provides True-RMS AC voltage and current for accurate measurements on non-linear signals Measures resistance up to 4 kOhm with throughput detection With safety specification CAT III 600 V, CAT IV 300 V ds: dsc: Scope of delivery Fluke 179 True-RMS digital multimeter Fluke 323 True-RMS current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point Test lead set AC175 Screw-threaded crocodile clips set kts: service kit industrial multimeter kpn: 179 IMSK kpn_dash: kpn_clear: 179IMSK bkpn: FLUKE 179 IMSK bkpn_clear: FLUKE 179IMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4370598 sr_ns: FLUKE4370598
r: 08106976 p: 1049.876 pid: 72792 b: FLUKE q: 0 st: lt: 8 ean: 0195112035719 sr: FLUKE 5317706 sr_no_br: 5317706 sr_no_br_cl: 5317706 sr_cl: FLUKE5317706 sr_dash: sold: 3149.628 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1662 SCH FTT KIT set 1662 multifunction tester with TruTest data management software - 5317706 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Fluke 1662 multifunction tester The Fluke 1662 installation tester offers you Fluke reliability and all the basic testing capabilities you need for everyday installation testing. It tests according to all local regulations and is simple and intuitive to use. Additional useful features, such as on/off automatic start for RCD and loop test and self-test, save time and give you more confidence in your results. Fluke TruTest data management software Fluke TruTest software is designed to eliminate the problems associated with traditional electrical system data management and reporting. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement tools from Fluke and Beha-Amprobe. The TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. ds: dsc: Scope of delivery 1662 multifunctional installation tester 6x AA batteries (IEC LR6) C1600 carrying case Zeroing function Heavy-duty power cord STD standard test lead set Padded carrying and waist strap Quick guide TP165X probe with remote control and cable IR189USB cable TruTest data management software kts: set 1662 multifunction tester with TruTest data management software kpn: 1662 SCH FTT KIT kpn_dash: kpn_clear: 1662SCHFTTKIT bkpn: FLUKE 1662 SCH FTT KIT bkpn_clear: FLUKE 1662SCHFTTKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5317706 sr_ns: FLUKE5317706
r: 03392951 p: 3112.59 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 3112.59 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02393831 p: 217.766 pid: 157143 b: MITUTOYO q: 3 st: 1 lt: 1 ean: 4946368667997 sr: MITUTOYO 500-152-30 sr_no_br: 500-152-30 sr_no_br_cl: 50015230 sr_cl: MITUTOYO50015230 sr_dash: MITUTOYO 500 sold: 3048.724 p_range: none type: standard act: 1 avo: 1 av: Measuring range 200 mm Reading 0,02 mm mm Jaws length 50 mm n: MITUTOYO 500-152-30 Digimatic caliper with roller knob and data output 0-200 mm cn: CALIPER cn2: CALIPER cn_clear: CALIPER d: Product description: These Digimatic calipers enable reliable measurement and offer you the following benefits: Now equipped with the same AOS (Advanced Onsite Sensor) induction model encoder used in the top-end ABS coolant-proof calipers. Thanks to the adoption of the electromagnetic induction model ABS encoder, this caliper can be used without worrying about contamination on the ruler during measurement. The detection signal is not affected by dirt (water, oil, etc.) on the surface of the ruler. The guide provides smooth, stable and easy use. Character height: 9 mm (reduction of fatigue due to the high-contrast LCD). The ABS (ABSOLUTE) ruler does not require zeroing after switching on, nor does it have a limited response speed. Exceptionally long battery life. ds: dsc: kts: Digimatic caliper with roller knob and data output 0-200 mm kpn: 500-152-30 kpn_dash: 500 kpn_clear: 50015230 bkpn: MITUTOYO 500-152-30 bkpn_clear: MITUTOYO 50015230 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Caliper | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo caliper sr_no_br_cl_ns: 50015230 sr_ns: MITUTOYO500-152-30
r: 03263017 p: 325.907 pid: 155974 b: MITUTOYO q: 4 st: 1 lt: 1 ean: 4946368850030 sr: MITUTOYO 543-700B sr_no_br: 543-700B sr_no_br_cl: 543700B sr_cl: MITUTOYO543700B sr_dash: MITUTOYO 543 sold: 2933.163 p_range: none type: standard act: 1 avo: 1 av: Max. measuring value 12,7 mm Reading 0,0005 mm mm Measuring range 0-12,7 mm n: MITUTOYO 543-700B Digital dial indicator ID-C 12.7 mm, 0.0005 mm, flat back panel cn: DIAL INDICATOR cn2: DIAL INDICATOR cn_clear: DIALINDICATOR d: Product description Multifunction measuring clock that is reliable and user-friendly Bidirectional communication, e.g. adjustment of settings via PC is possible Thanks to the ABSOLUTE sensor zeroing only once Excellent visibility with large digital/analogue display Model with 0.5 µm digital step is available Measurements and simple calculation and peak detection are possible Equipped with calibration schedule alert function GO/NG assessment very easy to set up Display 330° rotatable A lock-out function protects settings from unintended changes ds: dsc: kts: Digital dial indicator ID-C 12.7 mm, 0.0005 mm, flat back panel kpn: 543-700B kpn_dash: 543 kpn_clear: 543700B bkpn: MITUTOYO 543-700B bkpn_clear: MITUTOYO 543700B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Dial indicator | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo dial indicator sr_no_br_cl_ns: 543700B sr_ns: MITUTOYO543-700B
