r: 02265461 p: 328 pid: 96498 b: FLUKE q: 0 st: lt: 12 ean: sr: FLUKE 4152643 sr_no_br: 4152643 sr_no_br_cl: 4152643 sr_cl: FLUKE4152643 sr_dash: sold: 112504 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 325 True RMS multimeter with current clamp 400A AC/DC - 600V AC/DC - 4152643 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 323, 324 and 325, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 325 also offers measurement functions for DC current and frequency. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC and DC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 40 kOhm with loop-through test Temperature and capacitance measurement Frequency measurement ds: dsc: Scope of delivery 325 True-RMS current clamp Measurement leads Carrying case User manual kts: multimeter with current clamp 400A AC/DC - 600V AC/DC kpn: 325 True RMS kpn_dash: kpn_clear: 325TrueRMS bkpn: FLUKE 325 True RMS bkpn_clear: FLUKE 325TrueRMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 4152643 sr_ns: FLUKE4152643
r: 02953728 p: 2241 pid: 71277 b: FLUKE q: 0 st: lt: 12 ean: 0095969766913 sr: FLUKE 4547054 sr_no_br: 4547054 sr_no_br_cl: 4547054 sr_cl: FLUKE4547054 sr_dash: sold: 60507 p_range: none type: standard act: 1 avo: av: n: FLUKE 1664 FC multifunctional installation tester - 4547054 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description: Protect equipment, share results wirelessly, perform seven tests at the touch of a button. The Fluke 1664 FC installation tester is the only tester with 'preliminary insulation test'. If the tester recognises that a device is connected to the system under test, it aborts the insulation test to prevent damage. The 1664 FC also offers you Fluke Connect , so you can send test results to your smartphone and collaborate with others. The Auto Test feature performs seven tests at the touch of a button, reducing the need for manual connections and reducing the risk of errors. Preliminary insulation test Protect the installation. Avoid costly errors. The Fluke 1664 FC installation tester is the only installation tester with 'preliminary insulation test', warning you of potentially serious and costly errors. If the tester recognises that a device is connected to the system under test, it aborts the insulation test and gives a visual warning. This helps prevent damage to peripheral devices and keeps your customer happy. Fluke Connect and FlukeCloud storage Share information, from anywhere. Stay informed, even if you and your team are in different locations. Fluke Connect allows your 1664 FC installation tester to send test results to your smartphone so you can connect and collaborate with others. It's the fastest way to show your team what you see, so you can get authorisation without leaving the site. Recall stored results from anywhere. FlukeCloud storage lets you access stored results and make decisions in real-time, whether you're in the office or on site. Plus you can import the data into Fluke DMS and generate certificates. Plus you get world-class protection. Secure. Secure. Fast. More accurate. All thanks to the power of Fluke Connect. Auto Test reduces testing time by up to 40% Auto Test performs 5 required installation tests in one cycle, ensuring compliance with installation regulations. It reduces the number of manual connections, reduces the risk of errors and reduces test time by up to 40% compared to previous Fluke models. Key features: The 1664 FC puts more power in your hands by testing quickly and efficiently according to all local regulations. Devices inadvertently connected to the system being tested are protected. Moreover, the 1664 FC makes it easy to share test results via your smartphone. Automatic test for measuring mains/loop impedance, trip current/switch-off time of RCCBs and for insulation testing, at the touch of a button. Additional high-current loop mode. Faster measurements compared to loop tests with no-trip mode for RCCBs. Z-max memory for loop tests ? Easy evaluation of the highest loop test value. Unique zeroing adapter for fast, always reliable and accurate compensation for measurement and mains cables. Fast voltage measurement between L-N, L-PE and N-PE using the mains lead. This does not require changing the measurement connections. Simultaneously measures tripping time and tripping current of RCCBs (RCCB type AC and A). Two measurements simultaneously and dual display. PEFC or PSC and loop impedance are measured and displayed in parallel, saving you time. Ring tests ? select required input sockets with soft keys ? no changing of test leads. Automatic test start for loop and earth leakage tests ? as soon as the mains voltage is stable, the test starts. The earth potential touch pad detects elevated earth potentials >50 V and alerts you to potentially dangerous situations. Supplied with SureGrip safety test leads and terminals, giving the user a comfortable, reliable grip and consistent results. Rotary switch clearly indicates which function is selected; all functions in one place and no complex multi-level menus. Large backlit display, clear symbols and an exceptionally wide viewing angle for easy and safe measuring. PASS/FAIL indication for RCD test results. Variable RCD current mode for customised settings. Loop and mains resistance with m?resolution Testing of RCDs sensitive to smoothed DC voltage (type B). Extended memory with 3 layers. Use pass-through test currents for measuring motor windings. Withstands a fall of 1 metre. Compact, light (less than 1.3 kg) and with padded neck strap leaving your hands free for all-day testing. ds: dsc: Scope of delivery 6 AA batteries (IEC LR6) C1600 carrying case Zeroing function Heavy-duty power cord STD standard measuring lead set C1600 carrying case Padded carrying and waist strap Quick guide TP165X probe with remote control and cable User manual on CD-ROM kts: multifunctional installation tester kpn: 1664 FC kpn_dash: kpn_clear: 1664FC bkpn: FLUKE 1664 FC bkpn_clear: FLUKE 1664FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 4547054 sr_ns: FLUKE4547054
r: 02827019 p: 387 pid: 70918 b: FLUKE q: 0 st: lt: 5 ean: 0095969854030 sr: FLUKE 4910257 sr_no_br: 4910257 sr_no_br_cl: 4910257 sr_cl: FLUKE4910257 sr_dash: sold: 45279 p_range: none type: standard act: 1 avo: av: n: FLUKE T6-1000 Electrical tester - 4910257 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke T6 is the perfect 'all-in-one' tool for troubleshooting, maintenance and service. Fault finding in electrical systems can be time-consuming and potentially dangerous as it requires access to metal contact points. With the latest Fluke T6 electrical testers, reliable True RMS measurements can now be made in congested junction boxes or along conductors with inaccessible endpoints. This saves time, eliminates potential errors and significantly reduces the risk of arc discharge. The robust testers have the safety specification 1000 V CAT III and 600 V CAT IV and feature an easy-to-read backlit display. FieldSense technology FieldSense With Fluke's FieldSense technology, you can now take measurements quickly and easily by sliding the open fork over a conductor to see the voltage level without using test leads.* *Requires a capacitive earth connection, provided by the user in most applications. In some situations, grounding via the test lead is required. How to use your new Fluke T6 Learn how to use your new T6 with revolutionary 'Field Sense' technology and get the best out of your tester. Keep the following hints in mind when using the instrument. Measure voltage and current at the same time. How does FieldSense technology work? With a capacitive sensor, a voltage signal is measured via the user's hand in relation to earth, without any electrical contact or galvanic connection and completely isolated! The sensor area of the tester must be close to the measured signal on a live conductor. In this case, both the user's hand and body provide a connection to earth. The electric field (voltage) and magnetic field (current) are recorded. If the earth connection is missing, an earth symbol is shown on the display of the T6. In some cases, measuring leads must be used: When the hand or human body is isolated from earthing (e.g. By safety gloves) or when the human body is not in contact with the earth ground (e.g. on upper floors in wooden houses), contact with the earth ground must be made by connecting the black test lead (COM) to the earth ground. Main product features FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage+ Simultaneous display of voltage and current - displays all power measurements at a glance for efficient troubleshooting 1 to 1000 V AC or DC (T6-1000) 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 100 kOhm Frequency measurement 45 Hz to 66 Hz Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to four years by registering the product within 45 days of purchase Key features: Measure voltage and current simultaneously, without test leads! Safer working: Measure voltage up to 1000 V AC via the open fork, without measuring leads. Faster work: No need to open covers or remove wire nuts. More efficient work: Measure voltage and current simultaneously. Work anywhere: The 17.8 mm open fork is the widest in the industry; it measures up to 200 A at 120 mm2. ds: dsc: kts: Electrical tester kpn: T6-1000 kpn_dash: T6 kpn_clear: T61000 bkpn: FLUKE T6-1000 bkpn_clear: FLUKE T61000 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4910257 sr_ns: FLUKE4910257
r: 02304198 p: 164 pid: 154492 b: FLUKE q: 0 st: lt: 7 ean: sr: FLUKE 4130488 sr_no_br: 4130488 sr_no_br_cl: 4130488 sr_cl: FLUKE4130488 sr_dash: sold: 37392 p_range: none type: standard act: 1 avo: av: Min. temperature -30 °C Max. temperature 650 °C Optical ratio 12:1 Power supply 1 x AA Accuracy ± 1 °C n: FLUKE 62 MAX+ laser dot infrared thermometer - 4130488 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Small in dimensions. Big in robustness. Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine that an electrical distributor has a hot spot, that an electric motor is overheating or that a heating, ventilation and air-conditioning system is operating inefficiently? The answer is: with an infrared thermometer. With handheld, non-contact infrared thermometers, you can instantly measure the temperature of equipment in hard-to-reach places or dangerous environments. And with early detection of abnormal temperatures, problems can be rectified early. The new Fluke 62 MAX and 62 MAX+ infrared thermometers are designed based on what you need in your work, and they are everything you expect from the experts in measurement tools. small, extremely accurate and extremely easy to use. Compliant with protection class IP54 and therefore dust- and waterproof. Accurate yet robust enough to withstand a 3-metre drop. Key features Dust and waterproof: IP54-compliant and thus dust- and waterproof. Robust: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Other features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when measured values fall outside the limits. Power supply: both the 62 MAX and 62 MAX+ are powered by a single standard AA battery. ds: dsc: Scope of delivery Infrared thermometer with dual laser 12:1 spotlight kts: laser dot infrared thermometer kpn: 62 MAX+ kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX+ bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 4130488 sr_ns: FLUKE4130488
r: 41986162 p: 142 pid: 83574 b: FLUKE q: 0 st: lt: 7 ean: sr: FLUKE 4130474 sr_no_br: 4130474 sr_no_br_cl: 4130474 sr_cl: FLUKE4130474 sr_dash: sold: 22294 p_range: none type: standard act: 1 avo: av: Min. temperature -30 °C Max. temperature 500 °C Optical ratio 10:1 Power supply 1 x AA Accuracy ± 1,5 °C n: FLUKE 62 MAX laser dot infrared thermometer - 4130474 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Small in dimensions. Big in robustness. Temperature is often the first indication of potential problems in electrical and mechanical applications. But how can you easily determine that an electrical distributor has a hot spot, that an electric motor is overheating or that a heating, ventilation and air-conditioning system is operating inefficiently? The answer is: with an infrared thermometer. With handheld, non-contact infrared thermometers, you can instantly measure the temperature of equipment in hard-to-reach places or dangerous environments. And with early detection of abnormal temperatures, problems can be rectified early. The new Fluke 62 MAX and 62 MAX+ infrared thermometers are designed based on what you need in your work, and they are everything you expect from the experts in measurement tools. small, extremely accurate and extremely easy to use. Compliant with protection class IP54 and therefore dust- and waterproof. Accurate yet robust enough to withstand a 3-metre drop. In fact, the 62 MAX and 62 MAX+ are so robust that they are the only infrared thermometers you don't have to handle with care. Key features Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Rugged: tested to withstand a 3-metre drop. Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Other features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Two lasers: the 62 MAX+ has two rotating lasers that help you identify the surface to be measured. The measurement surface is the plane between the points. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two measured values. Alarm: Alarms Hi and Lo for too high and too low values indicate when measured values fall outside the limits. Power supply: both the 62 MAX and 62 MAX+ are powered by a single standard AA battery. ds: dsc: Scope of delivery Fluke 62 MAX single laser infrared thermometer kts: laser dot infrared thermometer kpn: 62 MAX kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 4130474 sr_ns: FLUKE4130474
r: 02105533 p: 528 pid: 96416 b: FLUKE q: 0 st: lt: 8 ean: 0095969498173 sr: FLUKE 3469334 sr_no_br: 3469334 sr_no_br_cl: 3469334 sr_cl: FLUKE3469334 sr_dash: sold: 17952 p_range: none type: standard act: 1 avo: av: n: FLUKE 233 multimeter with remote display - 3469334 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new Fluke 233 digital true-RMS multimeter with remote display lets you be in two places at once. It gives you ultimate flexibility in unusual measurement scenarios. Place the detachable display where you can see it, then take the meter to a spot that is convenient for you ? no more fumbling with cords and the meter while trying to reach inaccessible places. You can now take measurements in hard-to-reach places, in locations where machines or panels are physically separated from an end or disconnect switch, or in places where the user is not allowed to go, such as clean rooms or explosive environments. Key features True-RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 50 kHz Thanks to a built-in thermometer, you can easily take temperature measurements without having to carry a separate instrument. Resistance measurement, loop-through and diode test Low-power wireless technology allows you to read the display up to 10 metres from the measurement point, offering extra flexibility. No interference with measurements The removable magnetic display can easily be placed where it can be easily read Measurements can be made without having to hold the meter, allowing users to have a better view of their measurement probes and also making electrical measurements even safer. Suitable for use as a conventional multimeter when the display is connected The transmitter is automatically switched off when the display is connected to the meter. Automatic switch-off for maximum battery life Min/Max and Average recording for automatic recording of variations Call-through and diode test Easy-to-read display with large digits and bright background lighting Battery life: approximately 400 hours ds: dsc: Scope of delivery 233 multimeter Test leads Crocodile clips 80BK-A temperature probe User's manual CD-ROM AA batteries kts: multimeter with remote display kpn: 233 kpn_dash: kpn_clear: 233 bkpn: FLUKE 233 bkpn_clear: FLUKE 233 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3469334 sr_ns: FLUKE3469334
r: 02332422 p: 237 pid: 95740 b: FLUKE q: 0 st: lt: 10 ean: 0095969623759 sr: FLUKE 4152637 sr_no_br: 4152637 sr_no_br_cl: 4152637 sr_cl: FLUKE4152637 sr_dash: sold: 15168 p_range: none type: standard act: 1 avo: av: n: FLUKE 324 TRMS current clamp 400A AC and 600V AC/DC - 4152637 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: True-RMS measurements and optimised ergonomics make the 320 series current clamps the best general instruments for troubleshooting by electricians in commercial premises and private homes. With the 324, you can check for load current and/or AC voltage and perform call-through tests on circuits, switches, fuses and contacts. These small, rugged current clamps are ideally suited for current measurements up to 400 A in tight cable boxes. The Fluke 324 model can also measure temperature and capacitance. Robust, reliable and accurate. Key features Slim, ergonomic design Large, easy-to-read backlit display Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 4 k? with through-bell test Temperature and capacitance measurement ds: dsc: Scope of delivery 324 True-RMS current clamp Measurement leads Carrying case User manual kts: TRMS current clamp 400A AC and 600V AC/DC kpn: 324 kpn_dash: kpn_clear: 324 bkpn: FLUKE 324 bkpn_clear: FLUKE 324 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4152637 sr_ns: FLUKE4152637
r: 02954004 p: 940 pid: 72137 b: FLUKE q: 0 st: lt: 13 ean: sr: FLUKE 3610452 sr_no_br: 3610452 sr_no_br_cl: 3610452 sr_cl: FLUKE3610452 sr_dash: sold: 8460 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. frequency 0,5 kHz n: FLUKE 381 True-RMS-AC/DC current clamp with removable display and iFlex - 3610452 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 381 offers everything you would expect from a current clamp, and is also equipped with a removable display for even more flexibility. One technician can now perform work that would normally require two workers. Clamp the Fluke 381 around a conductor, detach the display and move around the room to operate the various functions or remove protective devices, while viewing readings in real time. The iFlex flexible current clamp (included) extends the measurement range up to 2500 A AC, providing greater display flexibility, allowing measurements to be made on differently sized conductors and easier access to wires. Key features Wireless technology allows you to read the display up to 10 metres from the measurement point, offering additional flexibility without compromising measurement accuracy. The removable magnetic display can easily be placed where it can be easily read iFlex flexible current clamp, extending the measuring range up to 2500 A AC CAT IV 600 V, CAT III 1000 V Integrated low-pass filter and advanced signal processing for use in environments where electrical disturbances occur, resulting in stable readings. Fluke proprietary inrush current measurement technology that allows noise to be filtered out of the circuit and the inrush current of motors to be recorded exactly as determined by the circuit protection. With its ergonomic design, the current clamp sits well in the hand and can be used when wearing protective equipment. The transmitter automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case ds: dsc: Scope of delivery Fluke 381 True-RMS current clamp with detachable display and iFlex iFlex flexible current clamp, 18 inch Laminated instruction card Safety data sheet Carrying case TL75 test leads Five AAA alkaline batteries kts: True-RMS-AC/DC current clamp with removable display and iFlex kpn: 381 kpn_dash: kpn_clear: 381 bkpn: FLUKE 381 bkpn_clear: FLUKE 381 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3610452 sr_ns: FLUKE3610452
r: 02953985 p: 704 pid: 73514 b: FLUKE q: 0 st: lt: 8 ean: sr: FLUKE 4695932 sr_no_br: 4695932 sr_no_br_cl: 4695932 sr_cl: FLUKE4695932 sr_dash: sold: 7040 p_range: none type: standard act: 1 avo: av: n: FLUKE 375 FC True-RMS AC/DC current clamp - 4695932 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 375 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Log measurements and record their trends for intermittent fault detection Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safely out of the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 375 FC is the direct successor to the Fluke 375 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Record intermittent failures while performing other tasks, thanks to the Fluke 375 FC's logging capabilities Create and share reports from location via email, or make real-time calls with the ShareLive video call feature Fit the iFlex flexible current clamp; use it to extend the measurement range up to 2500 A AC; the flexible current clamp provides access to thick conductors in tight spaces Suitable for the magnetic TPAK suspension strap Integrated low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 600 A AC and DC current measurement 2500 A AC current measurement with (optional) iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurement of non-linear signals Frequency measurement up to 500 Hz with both jaws and iFlex Resistance measurement up to 60 kOhm with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations Measuring range of 500 mV DC for use with other accessories 1000µF capacitance measurement ds: dsc: kts: True-RMS AC/DC current clamp kpn: 375 FC kpn_dash: kpn_clear: 375FC bkpn: FLUKE 375 FC bkpn_clear: FLUKE 375FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695932 sr_ns: FLUKE4695932
r: 02751990 p: 107.4 pid: 8925 b: BOSCH q: 0 st: lt: 6 ean: 3165140772600 sr: BOSCH 0603676000 sr_no_br: 0603676000 sr_no_br_cl: 0603676000 sr_cl: BOSCH0603676000 sr_dash: sold: 5477.4 p_range: none type: standard act: 1 avo: av: Length 400 mm Measuring range 0-220 ° n: BOSCH PAM 220 goniometer - 0603676000 cn: ANGLE GAUGE cn2: ANGLE GAUGE cn_clear: ANGLEGAUGE d: Product description: Angle meter PAM 220 (Alkaline (2x LR06/AA)) Accurate and reliable measuring Integrated calculation functions Both single and double mitre Advantages: Saving time and effort is very important in both new construction and renovation work. The PAM 220 digital angle indicator from Bosch helps do-it-yourselfers do just that. Cap and mitre cuts can be set quickly and easily with the help of the angle meter, ceiling strips and skirting boards can thus be worked and fitted very easily. Thanks to soft grip and with 0.9 kg, the device is pleasant to handle and easy to transport. Also included in the scope of delivery of the PAM 220 from Bosch are two 1.5-V-LR06 (AA) batteries and a storage case. ds: dsc: Scope of delivery: Alkaline (2x LR06/AA) kts: goniometer kpn: PAM 220 kpn_dash: kpn_clear: PAM220 bkpn: BOSCH PAM 220 bkpn_clear: BOSCH PAM220 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Angle gauge | Home / Our brands / Bosch / Bosch tools / Bosch measuring and inspection technique / Bosch digital measuring and inspection instruments / Bosch digital measuring instruments / Bosch angle gauge sr_no_br_cl_ns: 0603676000 sr_ns: BOSCH0603676000
r: 02953986 p: 599 pid: 71302 b: FLUKE q: 0 st: lt: 8 ean: sr: FLUKE 4696001 sr_no_br: 4696001 sr_no_br_cl: 4696001 sr_cl: FLUKE4696001 sr_dash: sold: 5391 p_range: none type: standard act: 1 avo: av: n: FLUKE 374 FC True-RMS AC/DC current clamp - 4696001 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 374 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Record trends of measurements and detect intermittent faults, by connecting your meter to your phone via the Fluke Connect Measurements app Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safe outside the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 374 FC is the direct successor to the Fluke 374 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Create and share reports from location via email, or make real-time calls with the ShareLive video call feature Compatible with the iFlex flexible current clamp; use it to extend the measurement range up to 2500 A AC; the flexible current clamp provides access to thick conductors in tight spaces Suitable for the magnetic TPAK suspension strap Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 600 A AC and DC current measurement 2500 A AC current measurement with (optional) iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurements on non-linear signals Resistance measurement up to 6000 Ohms with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations 1000µF capacitance measurement ds: dsc: kts: True-RMS AC/DC current clamp kpn: 374 FC kpn_dash: kpn_clear: 374FC bkpn: FLUKE 374 FC bkpn_clear: FLUKE 374FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4696001 sr_ns: FLUKE4696001
r: 02065430 p: 381 pid: 10011 b: FLUKE q: 0 st: lt: 8 ean: 0095969559836 sr: FLUKE 3790564 sr_no_br: 3790564 sr_no_br_cl: 3790564 sr_cl: FLUKE3790564 sr_dash: sold: 4572 p_range: none type: standard act: 1 avo: av: Max. voltage AC/DC 600 V n: FLUKE 373/E True-RMS-AC current clamp - 3790564 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new Fluke 373 current clamp offers improved performance, making it ideal for all applications where only AC current measurements are made. The Fluke 373 is equipped with a True-RMS measurement function for AC voltage and current and a measurement function for resistances up to 6000 ? with call-through test. So this instrument is everything you need, plus a little more. Key features 600 A AC current measurement with fixed jaw 600 V AC and DC voltage measurement Advanced signal processing for use in environments where electrical disturbances occur, resulting in stable measured values CAT IV 300 V, CAT III 600 V True-RMS AC voltage and current for accurate measurements on non-linear signals The large, easy-to-read backlit display automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case Safety standards EN/IEC 61010-1:2001; 600 V CAT III, 300 V CAT IV ds: dsc: Scope of delivery Fluke 373 True-RMS-AC current clamp Laminated instruction card Safety data sheet Carrying case TL75 test leads Two AA alkaline batteries kts: True-RMS-AC current clamp kpn: 373/E kpn_dash: kpn_clear: 373E bkpn: FLUKE 373/E bkpn_clear: FLUKE 373E c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3790564 sr_ns: FLUKE3790564
r: 41012366 p: 938.212 pid: 155774 b: MITUTOYO q: 0 st: lt: 8 ean: 6923903400125 sr: MITUTOYO 570-304 sr_no_br: 570-304 sr_no_br_cl: 570304 sr_cl: MITUTOYO570304 sr_dash: MITUTOYO 570 sold: 3752.848 p_range: none type: standard act: 1 avo: av: Max. measuring range 600 mm Readout 0,01 mm n: MITUTOYO 570-304 Absolute Digimatic altimeter - 0-600mm cn: HEIGHT GAUGE cn2: HEIGHT GAUGE cn_clear: HEIGHTGAUGE d: Product description: Very accurate and reliable, this Digimatic altimeter offers you the following benefits: Built-in ABSOLUTE ruler. This eliminates the need for setting the reference point when turning on the instrument. Increased reliability as overspeed errors no longer occur. Fine adjustment gives you accurate positioning. With large and smooth-running handwheel for rough and fine adjustments. Supplied with carbide shear needle. With SPC data output. ds: dsc: kts: Absolute Digimatic altimeter - 0-600mm kpn: 570-304 kpn_dash: 570 kpn_clear: 570304 bkpn: MITUTOYO 570-304 bkpn_clear: MITUTOYO 570304 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Height gauge | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo height gauge sr_no_br_cl_ns: 570304 sr_ns: MITUTOYO570-304
r: 02874593 p: 84.18 pid: 70413 b: STANLEY q: 0 st: lt: 9 ean: 3253560774226 sr: STANLEY FMHT0-77422 sr_no_br: FMHT0-77422 sr_no_br_cl: FMHT077422 sr_cl: STANLEYFMHT077422 sr_dash: STANLEY FMHT0 sold: 2188.68 p_range: KLIUM_PRODUCT_RANGE_299 type: standard act: 1 avo: av: Min. temperature -50 °C Optical ratio 20:1 Power supply 1 x E Accuracy ± 2 °C Max. temperature 1350 °C Product Range Stanley Fatmax n: STANLEY FMHT0-77422 FATMAX infrared thermometer cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description STANLEY FATMAX IR Thermometer Features Thermal leak detection - from a reference temperature (green screen), scanning an area will show a red screen for detection of a higher temperature and blue screen for a lower temperature Optics 20:1, allows users to measure a circle of 32cm from 2.5m distance Accuracy of 2% or +/- 2 degrees - for highly accurate measurements Display with contrasting backlight - ensures visibility in all viewing conditions Temperature range from -50 °C to 1350 °C - wide range allows users to effectively complete desired tasks Measuring unit: Fahrenheit / Celius Emission of 0.95 and response time of 1 second IP 20 for protection against dust Supplied in sturdy carrying case, including 9V battery Non-slip rubber housing ds: dsc: Scope of delivery Supplied in sturdy pouch, including 9V battery kts: FATMAX infrared thermometer kpn: FMHT0-77422 kpn_dash: FMHT0 kpn_clear: FMHT077422 bkpn: STANLEY FMHT0-77422 bkpn_clear: STANLEY FMHT077422 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Stanley / Stanley tools / Stanley measuring and inspection technique / Stanley digital measuring and inspection instruments / Stanley digital measuring instruments / Stanley temperature gun | Home / Our brands / Stanley / Stanley Ranges / Stanley fatmax sr_no_br_cl_ns: FMHT077422 sr_ns: STANLEYFMHT0-77422
r: 02950633 p: 501 pid: 73239 b: FLUKE q: 0 st: lt: 11 ean: 0095969077651 sr: FLUKE 1281142 sr_no_br: 1281142 sr_no_br_cl: 1281142 sr_cl: FLUKE1281142 sr_dash: sold: 1503 p_range: none type: standard act: 1 avo: av: n: FLUKE 51-2 digital thermometer 50Hz with 1 channel - 1281142 cn: THERMOMETER cn2: THERMOMETER cn_clear: THERMOMETER d: Product description: The Fluke 51 II single input digital thermometer delivers fast results with laboratory accuracy (0.05% + 0.3°C). You can use the 51 II to measure contact temperature on motors, insulation, breakers, pipes, corroded connections, fluids and wires with industrial standard J, K, T or E-type thermocouple temperature sensors. The user-friendly front panel and large backlit display make it easy to view results. And the sleep mode function preserves battery life to give you a typical thousand hours of operation. Key features Single Input digital thermometer for lab, QA, process calibration, food safety and HVAC Measures J, K, T, and E-type thermocouples Presents results in °C, °F or Kelvin (K) on a large backlit display Includes a relative timer on MIN, MAX and AVG to provide a time reference for important events Other features Easily accessible battery drawer that allows battery replacement without breaking the calibration seal. Comes with a splash- and dust-resistant case, protected by an impact absorbing holster and a three-year warranty. Powered by three standard AA batteries Includes an electronic offset function that compensates for thermocouple errors to maximise overall accuracy. Capable of temperatures up to 900°C (1600°F) Offers a user-friendly front panel that is easy to install and operate. Features a sleep mode to extend battery life. Optional ToolPak accessory to hang the thermometer on a metal object (with the rare earth magnet) or secure it around a pipe (with Velcro) for hands-free use. ds: dsc: Scope of delivery Fluke 51 II single input digital thermometer Shock absorbing holster One 80PK-1 thermocouple probe kts: digital thermometer 50Hz with 1 channel kpn: 51-2 kpn_dash: 51 kpn_clear: 512 bkpn: FLUKE 51-2 bkpn_clear: FLUKE 512 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Thermometer | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke thermometer sr_no_br_cl_ns: 1281142 sr_ns: FLUKE1281142
r: 02804200 p: 245.602 pid: 154905 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368716688 sr: MITUTOYO 293-145-30 sr_no_br: 293-145-30 sr_no_br_cl: 29314530 sr_cl: MITUTOYO29314530 sr_dash: MITUTOYO 293 sold: 1228.01 p_range: none type: standard act: 1 avo: av: Micrometer type Outside micrometer Min. measuring range 0 mm Max. measuring range 25 mm Readout 0,001 mm n: MITUTOYO 293-145-30 QuantuMike screw gauge IP65 - 0-25mm, without data output cn: MICROMETER cn2: MICROMETER cn_clear: MICROMETER d: Product description: This is a screw gauge with a 2mm spindle pitch, movement four times faster than a standard screw gauge. The Digimatic screw gauge QuantuMike IP65 offers the following advantages: Fast measurements are achieved by using a coarse thread that moves the spindle by 2mm per revolution. Approximately four times faster than a standard screw gauge with 0.5mm spindle pitch. The instrument has excellent accuracy, with only ±1µm instrument error (75mm or less measuring range models). The duo ratchet and quick displacement mechanism make it suitable for single-handed use and use in screw gauge holder. Excellent resistance to water and dust (IP65 protection class) allows the screw gauge to be used in machine conditions with splashing coolant. ds: dsc: kts: QuantuMike screw gauge IP65 - 0-25mm, without data output kpn: 293-145-30 kpn_dash: 293 kpn_clear: 29314530 bkpn: MITUTOYO 293-145-30 bkpn_clear: MITUTOYO 29314530 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Micrometer | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo micrometer sr_no_br_cl_ns: 29314530 sr_ns: MITUTOYO293-145-30
r: 03234003 p: 933.21 pid: 16927 b: MITUTOYO q: 0 st: lt: 6 ean: 4946368854366 sr: MITUTOYO 539-860R sr_no_br: 539-860R sr_no_br_cl: 539860R sr_cl: MITUTOYO539860R sr_dash: MITUTOYO 539 sold: 933.21 p_range: none type: standard act: 1 avo: av: n: MITUTOYO 539-860R linear scale AT715 - 2000 mm cn: LINEAR MEASURING SCALE cn2: LINEAR MEASURING SCALE cn_clear: LINEARMEASURINGSCALE d: Product description This linear scale is based on the ABSOLUTE electromagnetic induction principle, which offers IP67 protection. After switching off, there is no need to reset the zero point. ds: dsc: kts: linear scale AT715 - 2000 mm kpn: 539-860R kpn_dash: 539 kpn_clear: 539860R bkpn: MITUTOYO 539-860R bkpn_clear: MITUTOYO 539860R c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Linear measuring scale | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo linear measuring scale sr_no_br_cl_ns: 539860R sr_ns: MITUTOYO539-860R
r: 02954683 p: 459.762 pid: 156359 b: MITUTOYO q: 0 st: lt: 8 ean: 4946368716718 sr: MITUTOYO 293-148-30 sr_no_br: 293-148-30 sr_no_br_cl: 29314830 sr_cl: MITUTOYO29314830 sr_dash: MITUTOYO 293 sold: 919.524 p_range: none type: standard act: 1 avo: av: Micrometer type Outside micrometer Min. measuring range 75 mm Max. measuring range 100 mm Readout 0,001 mm n: MITUTOYO 293-148-30 QuantuMike screw gauge IP65 - 75-100mm, without data output cn: MICROMETER cn2: MICROMETER cn_clear: MICROMETER d: Product description This is an IP65 screw gauge which is four times faster to use than the standard screw gauge. Fast measurements are achieved by using a screw thread that moves the spindle by 2mm per revolution. Extremely long battery life (2.4 years). Very high accuracy. Duo ratchet mechanism ensures easy use when measuring out of hand or in a screw measure holder. Excellent resistance to water and dust (IP65 protection class) allows the screw gauge to be used in workshop conditions with splashing coolant. ds: dsc: kts: QuantuMike screw gauge IP65 - 75-100mm, without data output kpn: 293-148-30 kpn_dash: 293 kpn_clear: 29314830 bkpn: MITUTOYO 293-148-30 bkpn_clear: MITUTOYO 29314830 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Micrometer | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo micrometer sr_no_br_cl_ns: 29314830 sr_ns: MITUTOYO293-148-30
r: 02951239 p: 886 pid: 71043 b: FLUKE q: 0 st: lt: 6 ean: 0095969565127 sr: FLUKE 3821081 sr_no_br: 3821081 sr_no_br_cl: 3821081 sr_cl: FLUKE3821081 sr_dash: sold: 886 p_range: none type: standard act: 1 avo: av: n: FLUKE 54-2 B digital thermometer 50 Hz with 2 channels - 3821081 cn: THERMOMETER cn2: THERMOMETER cn_clear: THERMOMETER d: Product description: Fluke 54 II B dual input digital thermometer can record up to 500 data points in internal memory. Fast results and laboratory accuracy (0.05% + 0.3 °C). Check the contact temperature of motors, insulation, breakers, pipes, rusted joints, fluids and wires with industrial standard J, K, T, E, N, R and S thermocouple temperature sensors. Key features A large backlit dual display shows any combination of T1, T2, T1-T2 plus MIN, MAX or AVG. Recall function allows easy viewing of recorded data on the meter display. Infrared USB communication port allows data to be exported to the optional FlukeView Forms Temperature PC software for further analysis and graphical display. Data logging up to 500 data points with user-selectable logging interval Relative timer at MIN, MAX and AVG provides time reference for major events. Electronic compensation function allows compensation of thermocouple errors to maximise overall accuracy. Measures J, K, T, E, R, S and N-type thermocouples Readout in °C, °F or Kelvin (K) Splash- and dust-resistant housing protected by shock-absorbing holster User-friendly front panel is easy to set up and operate Sleep mode extends battery life (lifetime of 1000 hours on average) Battery door for easy battery replacement without breaking the calibration seal Optional ToolPak accessory allows the thermometer to be hung on a metal object (with the rare earth magnet) or secured around a pipe (with Velcro) for hands-free operation. 3-year warranty ds: dsc: Scope of delivery Fluke 52 II dual input digital thermometer Shock absorbing holster Two 80PK-1 thermocouple probes kts: digital thermometer 50 Hz with 2 channels kpn: 54-2 B kpn_dash: 54 kpn_clear: 542B bkpn: FLUKE 54-2 B bkpn_clear: FLUKE 542B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Thermometer | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke thermometer sr_no_br_cl_ns: 3821081 sr_ns: FLUKE3821081
