r: 02951909 p: 3527.608 pid: 71379 b: FLUKE q: 0 st: lt: 8 ean: 0095969062091 sr: FLUKE 665080 sr_no_br: 665080 sr_no_br_cl: 665080 sr_cl: FLUKE665080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 718 100US pressure calibrator (7 bar) - 665080 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The complete solution for pressure calibration The Fluke 718 series of pressure calibrators offers a total pressure calibration solution for transmitters, meters and switches. This compact pressure calibration solution is about two-thirds smaller than comparable instruments and weighs only one kilogram. This unique, easy-to-clean pump is protected against damage and can be cleaned without disassembly, even in the field. Key features Generates and measures pressure and milliamps for calibration and maintenance of almost all pressure equipment The integrated pump can be easily cleaned if it accidentally comes into contact with liquids, reducing operating and repair costs and enabling maintenance of the pump in the field Error rate calculation for faster pass/fail decisions in the field Highest mA accuracy of 0.015% for greater measurement reliability and wider range of tasks Min/Max/Hold for recording changing measured values Switch test function for faster and more accurate testing of pressure switches New pressure ranges mean fewer additional instruments needed ds: dsc: Scope of delivery Pressure calibrator -850 mbar to 7 bar (-85 to 689.48 kPa; -12 to 100 psi) Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) Test leads and alligator clips Two 9-V alkaline batteries NIST - traceable calibration report and data kts: pressure calibrator (7 bar) kpn: 718 100US kpn_dash: kpn_clear: 718100US bkpn: FLUKE 718 100US bkpn_clear: FLUKE 718100US c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 665080 sr_ns: FLUKE665080
r: 02951971 p: 3512.915 pid: 71205 b: FLUKE q: 0 st: lt: 8 ean: 0095969673945 sr: FLUKE 4353366 sr_no_br: 4353366 sr_no_br_cl: 4353366 sr_cl: FLUKE4353366 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1610 pressure calibrator with two sensors, 1.1 bar, 69 bar - 4353366 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 1000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 69 bar kpn: 721-1610 kpn_dash: 721 kpn_clear: 7211610 bkpn: FLUKE 721-1610 bkpn_clear: FLUKE 7211610 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353366 sr_ns: FLUKE4353366
r: 02951989 p: 3512.915 pid: 71390 b: FLUKE q: 0 st: lt: 8 ean: 0095969673990 sr: FLUKE 4353412 sr_no_br: 4353412 sr_no_br_cl: 4353412 sr_cl: FLUKE4353412 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3615 pressure calibrator with two sensors, 2.48 bar, 103 bar - 4353412 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 1500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 103 bar kpn: 721-3615 kpn_dash: 721 kpn_clear: 7213615 bkpn: FLUKE 721-3615 bkpn_clear: FLUKE 7213615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353412 sr_ns: FLUKE4353412
r: 02951967 p: 3512.915 pid: 72070 b: FLUKE q: 0 st: lt: 8 ean: 0095969673860 sr: FLUKE 4353283 sr_no_br: 4353283 sr_no_br_cl: 4353283 sr_cl: FLUKE4353283 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1603 pressure calibrator with two sensors, 1.1 bar, 20 bar - 4353283 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 300 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 20 bar kpn: 721-1603 kpn_dash: 721 kpn_clear: 7211603 bkpn: FLUKE 721-1603 bkpn_clear: FLUKE 7211603 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353283 sr_ns: FLUKE4353283
r: 02951991 p: 3512.915 pid: 71393 b: FLUKE q: 0 st: lt: 8 ean: 0095969674034 sr: FLUKE 4353458 sr_no_br: 4353458 sr_no_br_cl: 4353458 sr_cl: FLUKE4353458 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3630 pressure calibrator with two sensors, 2.48 bar, 200 bar - 4353458 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 3000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 200 bar kpn: 721-3630 kpn_dash: 721 kpn_clear: 7213630 bkpn: FLUKE 721-3630 bkpn_clear: FLUKE 7213630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353458 sr_ns: FLUKE4353458
r: 02951987 p: 3512.915 pid: 72080 b: FLUKE q: 0 st: lt: 8 ean: 0095969673914 sr: FLUKE 4353330 sr_no_br: 4353330 sr_no_br_cl: 4353330 sr_cl: FLUKE4353330 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3605 pressure calibrator with two sensors, 2.48 bar, 34 bar - 4353330 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 34 bar kpn: 721-3605 kpn_dash: 721 kpn_clear: 7213605 bkpn: FLUKE 721-3605 bkpn_clear: FLUKE 7213605 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353330 sr_ns: FLUKE4353330
r: 03392951 p: 3459.325 pid: 178064 b: FLUKE q: 0 st: lt: 8 ean: 0195112148877 sr: FLUKE 6093300 sr_no_br: 6093300 sr_no_br_cl: 6093300 sr_cl: FLUKE6093300 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093300 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1674 FC comes with a patented Insulation PreTest, allowing you to better protect the installation and avoid costly errors. If the tester detects that devices are connected to the system during the test, the insulation test is stopped and a visible and audible warning is activated. This helps prevent accidental damage to peripheral devices and saves you time and money. Key features Field-updatable - you can apply regulatory changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1674 FC SCH/FEV300 kpn_dash: kpn_clear: 1674FCSCHFEV300 bkpn: FLUKE 1674 FC SCH/FEV300 bkpn_clear: FLUKE 1674FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093300 sr_ns: FLUKE6093300
r: 02951993 p: 3404.031 pid: 72710 b: FLUKE q: 0 st: lt: 8 ean: 0095969674072 sr: FLUKE 4353499 sr_no_br: 4353499 sr_no_br_cl: 4353499 sr_cl: FLUKE4353499 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3650 pressure calibrator with two sensors, 2.48 bar, 345 bar - 4353499 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 5000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 345 bar kpn: 721-3650 kpn_dash: 721 kpn_clear: 7213650 bkpn: FLUKE 721-3650 bkpn_clear: FLUKE 7213650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353499 sr_ns: FLUKE4353499
r: 02951980 p: 3404.031 pid: 71209 b: FLUKE q: 0 st: lt: 8 ean: 0095969674065 sr: FLUKE 4353486 sr_no_br: 4353486 sr_no_br_cl: 4353486 sr_cl: FLUKE4353486 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1650 pressure calibrator with two sensors, 1.1 bar, 345 bar - 4353486 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 5000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 345 bar kpn: 721-1650 kpn_dash: 721 kpn_clear: 7211650 bkpn: FLUKE 721-1650 bkpn_clear: FLUKE 7211650 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353486 sr_ns: FLUKE4353486
r: 02951988 p: 3404.031 pid: 73426 b: FLUKE q: 0 st: lt: 8 ean: 0095969673952 sr: FLUKE 4353375 sr_no_br: 4353375 sr_no_br_cl: 4353375 sr_cl: FLUKE4353375 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3610 pressure calibrator with two sensors, 2.48 bar, 69 bar - 4353375 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 1000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 69 bar kpn: 721-3610 kpn_dash: 721 kpn_clear: 7213610 bkpn: FLUKE 721-3610 bkpn_clear: FLUKE 7213610 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353375 sr_ns: FLUKE4353375
r: 02388082 p: 3390.866 pid: 153502 b: MITUTOYO q: 0 st: lt: 16 ean: 4946368636740 sr: MITUTOYO 568-927 sr_no_br: 568-927 sr_no_br_cl: 568927 sr_cl: MITUTOYO568927 sr_dash: MITUTOYO 568 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Micrometer type Inside micrometer Min. measuring range 50 mm Max. measuring range 100 mm n: MITUTOYO 568-927 Absolute 3-point Borematic inner screw set with interchangeable head 50-100mm cn: MICROMETER cn2: MICROMETER cn_clear: MICROMETER d: Product description This is a three-point Digimatic unfolding internal micrometer. Each set consists of one display unit with interchangeable measuring heads depending on size. Enables easy and quick measuring. Titanium-coated measuring tips give excellent durability and shock resistance. A large LCD display with character height of 11mm for easy reading. 330° rotatable display for easy reading from any angle. GO/NG tolerance judgement function. Function lock to protect setting from unauthorised use. ds: dsc: kts: Absolute 3-point Borematic inner screw set with interchangeable head 50-100mm kpn: 568-927 kpn_dash: 568 kpn_clear: 568927 bkpn: MITUTOYO 568-927 bkpn_clear: MITUTOYO 568927 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Micrometer | Home / Our brands / Mitutoyo / Mitutoyo tools / Mitutoyo measuring and inspection technique / Mitutoyo digital measuring and inspection instruments / Mitutoyo digital measuring instruments / Mitutoyo micrometer sr_no_br_cl_ns: 568927 sr_ns: MITUTOYO568-927
r: 02957551 p: 3366.285 pid: 72871 b: FLUKE q: 0 st: lt: 8 ean: 0095969801966 sr: FLUKE 4706566 sr_no_br: 4706566 sr_no_br_cl: 4706566 sr_cl: FLUKE4706566 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1732/B three-phase energy logger (excl. current clamps) - 4706566 cn: ENERGY COST METER cn2: ENERGY COST METER cn_clear: ENERGYCOSTMETER d: Product description: The new Fluke 1732 and 1734 three-phase electrical Energy Loggers introduce a new easy way to find the sources of energy waste. Discover where and when energy is consumed within your installation, from the service input to individual circuits. Remotely view and share data with your team via the Fluke Connect app, allowing you to maintain safer working distances and make important decisions in real-time. This reduces the need for protective equipment, site visits and checks. Profiling energy consumption within your plant helps you identify energy saving opportunities and provides you with the data needed to take action. With the new Energy Analyze software package, you can compare multiple data points over a long period of time to get a complete picture of energy consumption. The first step towards reducing energy bills. Key features: Key measurement functions: Automatically measure and record voltage, current, power, power factor, energy and associated values Compatible with Fluke Connect: View data locally on the instrument, via the Fluke Connect mobile app and desktop software or via your building's Wi-Fi network Convenient instrument connection: The instrument is powered directly from the measured circuit Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III approved for service input and downstream circuits Measures all three phases: 3 flexible current clamps included Comprehensive log function: more than 20 individual log sessions can be stored on the instruments. All measured values are even recorded automatically so you never lose measurement trends. They can even be accessed during recording sessions and before downloading for real-time analysis Optimised user interface: quick, graphical settings for which additional information is available allow you to capture the right data every time, and the intelligent monitoring function ensures that the right connections have been made, reducing user uncertainty Bright colour touch screen: Useful analysis and checking of data can be done in the field, with full graphic display Optimised user interface: Always capture the right data with fast, guided graphical installation, and eliminate uncertainty about connections with the intelligent monitoring function Full on-site installation via front panel or Fluke Connect: No need to return to the workshop to download and install or to take a computer to the electrical distributor Fully integrated logging function: Connect other Fluke Connect tools to the Fluke 1734 to log two other measurement parameters at the same time. Choose from almost any parameter on a wireless digital multimeter or module with Fluke Connect* Application software Energy Analyze Plus: Download and analyse every detail of energy consumption using our automatic reports ds: dsc: Scope of delivery 1732 energy logger Power supply Voltage test cables Alligator clips (4x) Carrying case Energy Analyze Plus software Cables Colour coding set Documentation on USB memory kts: three-phase energy logger (excl. current clamps) kpn: 1732/B kpn_dash: kpn_clear: 1732B bkpn: FLUKE 1732/B bkpn_clear: FLUKE 1732B c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Energy cost meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke energy cost meter sr_no_br_cl_ns: 4706566 sr_ns: FLUKE4706566
r: 02951973 p: 3328.99 pid: 72073 b: FLUKE q: 0 st: lt: 8 ean: 0095969673983 sr: FLUKE 4353401 sr_no_br: 4353401 sr_no_br_cl: 4353401 sr_cl: FLUKE4353401 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1615 pressure calibrator with two sensors, 1.1 bar, 103 bar - 4353401 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 1500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 103 bar kpn: 721-1615 kpn_dash: 721 kpn_clear: 7211615 bkpn: FLUKE 721-1615 bkpn_clear: FLUKE 7211615 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353401 sr_ns: FLUKE4353401
r: 02951968 p: 3328.99 pid: 72706 b: FLUKE q: 0 st: lt: 8 ean: 0095969673907 sr: FLUKE 4353327 sr_no_br: 4353327 sr_no_br_cl: 4353327 sr_cl: FLUKE4353327 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1605 pressure calibrator with two sensors, 1.1 bar, 34 bar - 4353327 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 500 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 34 bar kpn: 721-1605 kpn_dash: 721 kpn_clear: 7211605 bkpn: FLUKE 721-1605 bkpn_clear: FLUKE 7211605 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353327 sr_ns: FLUKE4353327
r: 02951963 p: 3328.99 pid: 71202 b: FLUKE q: 0 st: lt: 8 ean: 0095969673822 sr: FLUKE 4353241 sr_no_br: 4353241 sr_no_br_cl: 4353241 sr_cl: FLUKE4353241 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1601 pressure calibrator with two sensors, 1.1 bar, 6.9 bar - 4353241 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 100 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 6.9 bar kpn: 721-1601 kpn_dash: 721 kpn_clear: 7211601 bkpn: FLUKE 721-1601 bkpn_clear: FLUKE 7211601 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353241 sr_ns: FLUKE4353241
r: 02951974 p: 3328.99 pid: 72076 b: FLUKE q: 0 st: lt: 8 ean: 0095969674027 sr: FLUKE 4353447 sr_no_br: 4353447 sr_no_br_cl: 4353447 sr_cl: FLUKE4353447 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-1630 pressure calibrator with two sensors, 1.1 bar, 200 bar - 4353447 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 16 PSIG, 3000 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 1.1 bar, 200 bar kpn: 721-1630 kpn_dash: 721 kpn_clear: 7211630 bkpn: FLUKE 721-1630 bkpn_clear: FLUKE 7211630 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353447 sr_ns: FLUKE4353447
r: 02951985 p: 3328.99 pid: 71385 b: FLUKE q: 0 st: lt: 8 ean: 0095969673877 sr: FLUKE 4353290 sr_no_br: 4353290 sr_no_br_cl: 4353290 sr_cl: FLUKE4353290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 721-3603 pressure calibrator with two sensors, 2.48 bar, 20 bar - 4353290 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: Pressure calibration and temperature measurement for gas transfer applications The Fluke 721 precision pressure calibrator is the ideal instrument for gas transfer applications. With two isolated pressure sensors, this instrument allows you to make static and differential pressure measurements simultaneously with a single instrument. Key features The 721 can be configured by selecting a low-pressure sensor and then adding one of 7 high-pressure ranges. Ideal for gas flow calibration (transfer) applications Two isolated, stainless steel pressure sensors with an accuracy of 0.025 % Pt100 RTD input for temperature measurement (thermocouple optional) Measures signals from 4 to 20 mA Internal 24V loop power supply can supply a transmitter under test Measure up to 30 V DC, check 24V loop power supplies Extend pressure measuring range via connection to 700-series external pressure modules (29 ranges) Large backlit graphic display can show up to three input signals simultaneously Save five instrument settings for later use ds: dsc: Scope of delivery Pressure calibrator with two sensors, 36 PSIG, 300 PSIG Carrying case Four (4) AA batteries User manual Traceable calibration certificate Measurement leads kts: pressure calibrator with two sensors, 2.48 bar, 20 bar kpn: 721-3603 kpn_dash: 721 kpn_clear: 7213603 bkpn: FLUKE 721-3603 bkpn_clear: FLUKE 7213603 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4353290 sr_ns: FLUKE4353290
r: 08107071 p: 3312.52 pid: 73494 b: FLUKE q: 0 st: lt: 8 ean: 0095969872959 sr: FLUKE 4991049 sr_no_br: 4991049 sr_no_br_cl: 4991049 sr_cl: FLUKE4991049 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 710 mA loop calibrator for valve testing with HART - 4991049 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description Key valve test functions include pre-configured valve signature test, speed test, step test, manual test and bump/partial stroke test Key mA loop calibration functions include mA generate, mA simulate, mA read, mA read/loop power and voltage read. The ValveTrack software allows data to be uploaded to a PC for further analysis of valve measurements logged and recorded in the 710's memory Testing valves easier than ever The Fluke 710 loop calibrator for valve testing is designed for quick and easy testing of control valves with HART technology. The 710's integrated test procedures and intuitive user interface allow users to test valves quickly and easily. In addition, the quick test results provide a clear diagnosis for quick maintenance decisions. Based on the results of the quick valve test, you know whether your valve is in good, marginal or poor condition, so you can quickly decide whether additional maintenance is required. Valve testing and HART communication with a precision loop calibrator The integrated HART communication function of the 710 loop calibrator for valve testing allows users to generate a 4-20 mA signal that controls the smart control valve. At the same time, the HART feedback signal is interpreted to determine whether the valve moves to the expected position. In addition to valve position information, the HART communication protocol can be used to determine the pressure delivered by the valve that moves the valve. The 710 provides integrated test procedures that automatically increase and change the mA signal while monitoring HART feedback on the valve position and pressure. This gives you a better picture of the valve's condition at the simple touch of a button. Preconfigured valve tests, concise answers Valve testing functions integrated into the 710 include Manual testing; manual modification of the mA signal and information on the HART position and pressure variable Increase of the mA signal over the full range from 4 to 20 to 4 mA during registration of the 0-100-0% position or of the pressures that move the valve from 0-100-0% Step change of the mA signal at the input of the valve and evaluation of the response of the valve to changes in the mA input signal Velocity tests to determine how fast the valve can be opened and closed Impact and partial stroke tests that help test valves over part of their range so they can be tested during an actual process ValveTrack software allows further analysis and trends to be created Valve tests logged and stored in the 710's memory can be uploaded using the ValveTrack analysis software.The ValveTrack software provides you with the following capabilities Uploading, printing and plotting of logged on-site valve tests performed Comparison of previously uploaded tests with recent tests Display of valve test history via HART label ID Export valve test data to CSV for further analysis in Microsoft Excel Save time, get answers On-site logging of HART data. After logging by the 710 on-site, the ValveTrack software can upload the HART configuration of up to 20 HART devices in your installation and output data in .csv or in .txt format. Logged mA loop measurements and HART data from a given transmitter can be logged for the purpose of troubleshooting and fine-tuning the loop. The data logging function has a selectable recording interval from 1 to 60 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables. Main product features Test procedures rated Good, Marginal or Poor for control valves Generic HART communication Highest-in-class accuracy of 0.01% of measurement or source value Compact rugged design Intuitive user interface with 'Quick-Set' button for quick set-up and user-friendliness 24 V DC loop power supply with mA measurement mode (-25% to 125%) Resolution of 1 µA in mA ranges and 1 mV in voltage ranges Built-in selectable 250Ohm resistor for HART communication Simple two-wire connection for all measurements Automatic shutdown for longer battery life Variable step and rise time in seconds. HART communication The Fluke 710 has a built-in HART modem for communication that supports the following HART commands Read PV (primary variable) information from sensor Read information about PV output Read out and write PV unit type, tag ID name, descriptor and message Read out and write ranges for the primary variables (upper and lower range values) Activating or deactivating fixed current mode Setting zero point shift Setting zero point DAC (mA output 4 mA) Set gain DAC (mA output 20 mA) HART commands for valves The 710 provides the following unique HART commands for control valves: Automatic adjustment of the valve controller ds: dsc: Scope of delivery Set of stackable measuring leads Set of alligator clips with extra long teeth TP220 measuring probes AC280 SureGrip hook terminals Lemo to USB upload/download cable ValveTrack software (free download) Carrying case Six AAA batteries (installed) 709/709H/710 user manual on CD-ROM 709/709H/710 Quick Start Guide 709/709H/710 Safety information kts: mA loop calibrator for valve testing with HART kpn: 710 kpn_dash: kpn_clear: 710 bkpn: FLUKE 710 bkpn_clear: FLUKE 710 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 4991049 sr_ns: FLUKE4991049
r: 02951458 p: 3246.504 pid: 72623 b: FLUKE q: 0 st: lt: 10 ean: 0095969815048 sr: FLUKE 4755975 sr_no_br: 4755975 sr_no_br_cl: 4755975 sr_cl: FLUKE4755975 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 124B/EU/S industrial scopemeter 40MHZ (incl. SCC kit) - 4755975 cn: OSCILLOSCOPE cn2: OSCILLOSCOPE cn_clear: OSCILLOSCOPE d: Product description: Fluke 120B industrial ScopeMeter series handheld oscilloscopes Simpler testing, more insight and faster troubleshooting of electromechanical equipment The compact ScopeMeter Series 120B is the rugged oscilloscope solution for troubleshooting and maintenance of industrial electrical and electro-mechanical equipment. It is a truly integrated tester, with oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. The ScopeMeter Series 120B can also be integrated wirelessly with the Fluke Connect Mobile App and with the FlukeView software for ScopeMeter, to enable greater collaboration, data analysis and archiving of critical test data. Key features The 120B series of ScopeMeter industrial test tools offer innovative features designed to help technicians find faults faster and get the information they need to keep their systems operational. Display waveforms with Connect-and-View technology for triggering and setting, and automatically view related numeric readings with Fluke IntellaSet technology, all without making manual adjustments. Recorder Event Detect capabilities record and log hard-to-find intermittent events for easy viewing and analysis.[S][0] Digital two-channel oscilloscope and multimeter 40 MHz or 20 MHz oscilloscope bandwidth Two digital true-RMS multimeters with 5,000 counts Connect-and-View triggering for easy hands-free operation IntellaSet technology automatically and intelligently adjusts the numerical readout based on the measured signal Dual-channel recorder for waveform and measured values to establish a trend of data over long periods of time Recorder Event Detect records hard-to-find intermittent signals on repeating waveforms up to 4 kHz Shielded test leads for oscilloscope, resistance and continuity measurements Perform resistance measurements, call-through and diode tests and capacitance measurements Power measurements (W, VA, VAR, PF, DPF, Hz) Harmonics in voltage, current and power Check with BusHealth the physical layer of industrial networks against defined reference levels Store or recall instrument data and settings Save instrument settings defined by a test set for routine maintenance or as most commonly used test procedures. External optically isolated USB interface to send, archive and analyse scope or measurement data Optional WiFi adapter connectable to internal USB port to wirelessly send information to PC, laptop or Fluke Connect Mobile App* FlukeView ScopeMeter software for Windows Rugged design to withstand vibration of 3g and shock of 30g and with protection class IP51 according to EN/IEC60529 Industry's highest safety specification: meets safety specification for CAT IV 600 V Rechargeable Li-ion battery, seven hours of battery power (with a four-hour charge time) ds: dsc: Scope of delivery Fluke 124B handheld oscilloscope Shielded test leads with black earth leads Measure lead black (for grounding) Hook terminals (red, blue) Adapter from banana plug to BNC (black, 2x) 10:1 voltage measuring probe Angled USB adapter WiFi USB adapter* Switching power supply, adapter/battery charger Rechargeable Li-ion battery pack Carrying case Magnetic hanging clip FlukeView ScopeMeter software for Windows Screen saver kts: industrial scopemeter 40MHZ (incl. SCC kit) kpn: 124B/EU/S kpn_dash: kpn_clear: 124BEUS bkpn: FLUKE 124B/EU/S bkpn_clear: FLUKE 124BEUS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Oscilloscope | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke oscilloscope sr_no_br_cl_ns: 4755975 sr_ns: FLUKE4755975
r: 03343213 p: 3240.771 pid: 166132 b: FLUKE q: 0 st: lt: 10 ean: 0195112119631 sr: FLUKE 5581087 sr_no_br: 5581087 sr_no_br_cl: 5581087 sr_cl: FLUKE5581087 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH FTT multifunctional installation tester with TruTest software bundle in case - 5581087 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1674 FC multifunction installation tester with the TruTest software bundle will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge protector testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software bundle in case kpn: 1674 FC SCH FTT kpn_dash: kpn_clear: 1674FCSCHFTT bkpn: FLUKE 1674 FC SCH FTT bkpn_clear: FLUKE 1674FCSCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581087 sr_ns: FLUKE5581087
