- Input power: 880 W
- Anti-vibration system: Yes
- Tool holder type: SDS-plus
Bosch corded rotary hammers, demolition hammers and impact drills, SDS-Plus/Max
This category brings together Bosch's corded machines for drilling and chiselling into stone and concrete, with rotary hammers at its core. On building sites, for installers and in renovation they are the workhorse for anchor holes, wall penetrations and demolition, within the broader range of Bosch electrical power tools.
The key difference is the tool holder. SDS-Plus rotary hammers stay compact enough for overhead work and anchoring in concrete; SDS-Max machines are heavier and built for large drilling diameters and heavy chiselling. For pure demolition, choose a demolition hammer, which chisels without drilling. A quick-change chuck lets the same rotary hammer switch to drilling in wood or metal.
Alongside the rotary hammers you will find impact drills for masonry, standard drills, a pillar drill for the workshop and diamond core drills. Compare the power in watts and the weight you can handle for a full working day: a light SDS-Plus hammer is quicker up a ladder, a heavy SDS-Max machine gets through reinforced concrete faster. If grinding or sanding follows the drilling, the Bosch corded angle grinders and sanders complete this line of mains-powered machines.
BOSCH GBH 4-32 DFR rotary hammer drill with SDS-Plus 900 W + quick-change chuck in case - 0611332101
- Input power: 900 W
- Anti-vibration system: Yes
- Tool holder type: SDS-plus
- Power: 710 W
- Input power: 1150 W
- Tool holder size: Not applicable
- Tool holder type: SDS-max
- Input power: 800 W
- Anti-vibration system: Yes
- Tool holder type: SDS-plus
- Input power: 1150 W
- Anti-vibration system: Yes
- Tool holder type: SDS-max
- Input power: 1300 W
- Drill chuck type: Cylindrical quick-release - cylindrical
- Min. clamping capacity: 1,5 mm
- Input power: 1500 W
- Tool holder size: Not applicable
- Tool holder type: SDS-max
- Input power: 650 W
- Tool holder size: Not applicable
- Tool holder type: SDS-plus
- Input power: 830 W
- Anti-vibration system: No
- Tool holder type: SDS-plus
- Input power: 750 W
- Min. clamping capacity: 1,5 mm
- Chuck material: Metal
- Input power: 1500 W
- Anti-vibration system: No
- Tool holder type: SDS-max
- Input power: 2000 W
- Drilling method: Wet and dry
- Max. drilling diameter (concrete): 180 mm
- Input power: 750 W
- Max. no-load speed: 3000 /min.
- Min. clamping capacity: 1,5 mm
- Input power: 830 W
- Anti-vibration system: No
- Tool holder type: SDS-plus
- Input power: 1500 W
- Anti-vibration system: Yes
- Tool holder type: SDS-max
- Input power: 800 W
- Anti-vibration system: Yes
- Tool holder type: SDS-plus
- Input power: 1700 W
- Tool holder size: Not applicable
- Tool holder type: SDS-max
- Input power: 1750 W
- Tool holder size: 30 mm
- Tool holder type: Internal hexagon
- Input power: 1750 W
- Tool holder size: 28 mm
- Tool holder type: Internal hexagon