What is this drill bit used for?

It is specially designed to drill through steel rebar in reinforced concrete.

Should this drill bit be used with or without hammer action?

Use this drill bit in an SDS-plus rotary hammer in rotary-only mode without impact.

What are the dimensions of this drill bit?

It has a diameter of 18 mm, a working length of 120 mm, and a total length of 300 mm.

Which tools are compatible with this drill bit?

With its standard 10 mm SDS-plus shank, it fits all rotary hammers equipped with an SDS-plus chuck.

How many cutters does the head have?

The carbide-tipped head features 4 cutting edges for rapid drilling and high wear resistance.

BOSCH 2608586995 rebar cutter with four cutting edges, SDS-Plus-9, 18 x 120 x 300 mm

Name: BOSCH 2608586995 rebar cutter with four cutting edges, SDS-Plus-9, 18 x 120 x 300 mm
Brand: BOSCH
SKU: 02224632
Price: 34.4 EUR
Availability: PreOrder

Supplier number: BOSCH 2608586995 | EAN 3165140576680

Recommended Retail Price €77.28

34.40 tax incl.

€28.43 excl. VAT (incl. all environmental contributions)

On order: delivered from 23/10/2026

blister

Delivery by DHL

✆ Talk to a specialist

Cut through reinforced concrete with the Bosch 2608586995

Practical benefits

Fast cutting through rebar: Specially shaped carbide teeth allow you to drill smoothly through steel rebar embedded in concrete.
Efficient dust and chip removal: The 2+2 spiral flute design and ventilation hole dissipate heat while quickly clearing out metal debris.
Smooth low vibration drilling: Vibration-optimised engineering ensures maximum power transfer directly from your SDS-plus hammer drill.

In a nutshell

The right choise for

When you hit steel reinforcement while drilling in reinforced concrete, the Bosch pro Rebar Cutter SDS-PLUS-9 keeps your work moving forward smoothly. Engineered with four tough carbide cutting edges, this 18 x 120 x 300 mm drill bit cuts cleanly through embedded rebar without jamming or damaging teeth. Designed for use in your SDS-plus rotary hammer in rotary-only mode without impact, it delivers controlled performance. The steep 2+2 spiral flute and ventilation hole quickly remove dust and metal chips while reducing vibrations, allowing you to drill up to a 120 mm depth with optimal control.

Product information FAQ

€34.40

tax incl.

Key features according to our expert

Diameter: 18 mm
Drill bit type: Hammer drill bit
Overall length: 300 mm
Shank size: 10 mm
Shank type: SDS-plus
Material (drill bit): Carbide tip
Number of cutting edges: 4 ea
Cutting length: 120 mm

Product description

Rebar Cutter with four cutting edges, SDS-Plus-9, 18 x 120 x 300 mm
Specially designed for drilling through reinforcement
Drill SDS plus-9 Rebar Cutter is specifically designed for drilling through reinforcement in reinforced concrete
Firmly attached carbide teeth are uniquely tempered for maximum drilling speed and wear resistance

Advantages

Drills through rebar - The SDS plus-9 Rebar Cutter drill bit is specifically designed for drilling through rebar in reinforced concrete.
The firmly attached carbide teeth are uniquely weathered for maximum drilling speed and wear resistance.
The sloping design with 2+2 spirals ensures optimum removal of drilling dust and a long service life.
The spirals virtually eliminate vibration for the best power transfer and highest speed.
There is also a ventilation hole in the drill for heat dissipation and removal of metal particles.
This drill fits rotary hammers with an SDS plus holder but should be used without hammer blows.
Do not drill into rebar until authorised by a structural engineer.
Fits all SDS plus rotary hammers.

All Features

Diameter: 18 mm
Drill bit type: Hammer drill bit
Overall length: 300 mm
Shank size: 10 mm
Shank type: SDS-plus
Material (drill bit): Carbide tip
Number of cutting edges: 4 ea
Cutting length: 120 mm
Overall length (l2) mm: 300
Shaft diameter (d) mm: 10
Diameter (d) mm: 18
Useful length (l1) mm: 120

Brand BOSCH
02224632
EAN 3165140576680
Supplier number BOSCH 2608586995

Frequently asked questions about this product

Answered by specialists

What is this drill bit used for?: It is specially designed to drill through steel rebar in reinforced concrete.
Should this drill bit be used with or without hammer action?: Use this drill bit in an SDS-plus rotary hammer in rotary-only mode without impact.
What are the dimensions of this drill bit?: It has a diameter of 18 mm, a working length of 120 mm, and a total length of 300 mm.
Which tools are compatible with this drill bit?: With its standard 10 mm SDS-plus shank, it fits all rotary hammers equipped with an SDS-plus chuck.
How many cutters does the head have?: The carbide-tipped head features 4 cutting edges for rapid drilling and high wear resistance.