Bessey hand tools

_

BESSEY STE 300 ceiling and mounting bracket 1700-3000mm - STE300

• Min. height: 170 cm
• Max. height: 300 cm
• Max. load capacity: 350 kg

On stock, immediately available.

55.40

€45.79 excl. VAT

[SEARCH SCORE
Sold desc:
1, 42763.19, 45.785 ]
query took: 1778913988.4786

layer :



r: 03178035
p: 45.785
pid: 153504
b: BESSEY
q: 16
st: 1
lt: 1
ean: 4008158041261
sr: BESSEY STE300
sr_no_br: STE300
sr_no_br_cl: STE300
sr_cl: BESSEYSTE300
sr_dash:
sold: 42763.19
p_range: none
type: standard
act: 1
avo: 1
av: Min. height 170 cm Max. height 300 cm Max. load capacity 350 kg
n: BESSEY STE 300 ceiling and mounting bracket 1700-3000mm - STE300
cn: TELESCOPIC SUPPORT
cn2: TELESCOPIC SUPPORT
cn_clear: TELESCOPICSUPPORT
d: Product description Load capacity up to 350 kg when fully retracted telescopic pole Extremely stable construction through high-load-bearing steel tubes and non-slip PVC contact surfaces (9 x 7 cm) One-hand operation thanks to 2-component plastic handle with pump mechanism Quick-release button for quickly retracting and extending the telescopic pole Adjustable holding force by turning the support on the handle Can also be used in inclined positions thanks to the contact surfaces, which can be tilted continuously from -45° to +45° GS-certified for quality and safety Extremely secure grip The support guarantees a reliable, secure grip through the extremely stable construction for a load capacity of up to 350 kg - depending on the support size and extension length through rubber PVC contact surfaces at the top and bottom through slip protection integrated in the handle Precise and fast handling The support can be accurately adjusted to requirements and safely released by fixing in three steps: To pre-adjust the ceiling prop, press the release button and extend the telescopic inner tube to the desired length. Fine adjustment is done by operating the pump handle until the installation plate of the support is in contact with the workpiece. Then turn the handle clockwise until the desired holding force is reached (note the maximum load capacity) by unlocking in two steps: First turn the ceiling punch anticlockwise. As soon as there is no more holding force, press the release button to retract the inner tube Safety instructions Read and observe the operating instructions. Do not exceed the specified maximum loads. You may only use the ceiling support and mounting bracket on flat and clean surfaces. The ceiling support and mounting bracket may not be loaded sideways. The ceiling support and mounting bracket may only be stretched by hand and without additional aids. You may only use use original BESSEY spare parts. Protect yourself with safety glasses and an assembly helmet. Material/Surface Upper and lower part made of reinforced PA6 plastic Steel tube, coated Lever made of reinforced PA6 plastic Protective caps made of plastic Maintenance Regular maintenance is necessary - only then can a secure grip be guaranteed (no slipping of the slide bar) Clean rails with solvent Clean and lubricate spindle regularly
ds:
dsc:
kts: ceiling and mounting bracket 1700-3000mm
kpn: STE 300
kpn_dash:
kpn_clear: STE300
bkpn: BESSEY STE 300
bkpn_clear: BESSEY STE300
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Telescopic support | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey telescopic support
sr_no_br_cl_ns: STE300
sr_ns: BESSEYSTE300

_

BESSEY KREV100-2K Vario body glue clamp REVO KREV 1000x95mm

• Max. clamping height: 1000 mm
• Max. spreading capacity: 1130 mm
• Depth: 95 mm

On stock, immediately available.

95.80

€79.17 excl. VAT

[SEARCH SCORE
Sold desc:
1, 39428.154, 79.173 ]
query took: 1778913988.4787

layer :



r: 02824153
p: 79.173
pid: 39363
b: BESSEY
q: 4
st: 1
lt: 1
ean: 4008158040202
sr: BESSEY KREV100-2K
sr_no_br: KREV100-2K
sr_no_br_cl: KREV1002K
sr_cl: BESSEYKREV1002K
sr_dash: BESSEY KREV100
sold: 39428.154
p_range: KLIUM_PRODUCT_RANGE_158
act: 1
avo: 1
av: Max. clamping height 1000 mm Max. spreading capacity 1130 mm Depth 95 mm Clamping tool handle type Screwdriver handle Clamping force 8000 N Weight 3,77 kg Product Range Bessey REVO
n: BESSEY KREV100-2K Vario body glue clamp REVO KREV 1000x95mm
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: Infinitely adjustable and fixable upper part, for optimum positioning of the workpiece Very large, parallel clamping surfaces With 3 protective caps for protecting sensitive surfaces Can be reversed without tools for spreading High-quality 2-component handle
ds:
dsc:
kts: Vario body glue clamp REVO KREV 1000x95mm
kpn: KREV100-2K
kpn_dash: KREV100
kpn_clear: KREV1002K
bkpn: BESSEY KREV100-2K
bkpn_clear: BESSEY KREV1002K
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey revo
sr_no_br_cl_ns: KREV1002K
sr_ns: BESSEYKREV100-2K

_

BESSEY UK60 light body clamp UniKlamp UK 600x80mm

• Max. clamping height: 600 mm
• Depth: 80 mm
• Type of chuck: F

On stock, immediately available.

Recommended Retail Price €33.93

24.60

€20.33 excl. VAT

[SEARCH SCORE
Sold desc:
1, 25493.82, 20.33 ]
query took: 1778913988.4787

layer :



r: 02675738
p: 20.33
pid: 39308
b: BESSEY
q: 21
st: 1
lt: 1
ean: 4008158027210
sr: BESSEY UK60
sr_no_br: UK60
sr_no_br_cl: UK60
sr_cl: BESSEYUK60
sr_dash:
sold: 25493.82
p_range: KLIUM_PRODUCT_RANGE_186
act: 1
avo: 1
av: Max. clamping height 600 mm Depth 80 mm Type of chuck F Clamping tool handle type Screwdriver handle Clamping force 1500 N Weight 0,93 kg Product Range Bessey UK UniKlamp
n: BESSEY UK60 light body clamp UniKlamp UK 600x80mm
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: Max. tensioning force 1,500 N Parallel clamping surfaces with extra-large bearing surfaces Clamping of different shapes, all around the guideway Universally applicable Light and handy Switch from clamping to spreading without tools ZB packaged
ds:
dsc:
kts: light body clamp UniKlamp UK 600x80mm
kpn: UK60
kpn_dash:
kpn_clear: UK60
bkpn: BESSEY UK60
bkpn_clear: BESSEY UK60
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey uk uniklamp
sr_no_br_cl_ns: UK60
sr_ns: BESSEYUK60

_

BESSEY one-handed gluing pliers EZS 300x80mm - EZS30-8

• Max. clamping height: 300 mm
• Max. spreading capacity: 510 mm
• Depth: 80 mm

On stock, immediately available.

Recommended Retail Price €40.97

25.40

€20.99 excl. VAT

[SEARCH SCORE
Sold desc:
1, 23069.109, 20.991 ]
query took: 1778913988.4787

layer :



r: 02050269
p: 20.991
pid: 39546
b: BESSEY
q: 26
st: 1
lt: 1
ean: 4008158034591
sr: BESSEY EZS30-8
sr_no_br: EZS30-8
sr_no_br_cl: EZS308
sr_cl: BESSEYEZS308
sr_dash: BESSEY EZS30
sold: 23069.109
p_range: KLIUM_PRODUCT_RANGE_139
type: standard
act: 1
avo: 1
av: Max. clamping height 300 mm Max. spreading capacity 510 mm Depth 80 mm Type of chuck F Clamping tool handle type Lever Clamping force 2000 N Weight 0,83 kg Product Range Bessey EZS One-Hand Clamps
n: BESSEY one-handed gluing pliers EZS 300x80mm - EZS30-8
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: Clamping force up to 2,000 N Can be converted to spreading without tools thanks to intelligent release mechanism on the upper jaw Ergonomically shaped 2-component plastic handle behind the rails ZB-packed
ds:
dsc:
kts: one-handed gluing pliers EZS 300x80mm
kpn: EZS30-8
kpn_dash: EZS30
kpn_clear: EZS308
bkpn: BESSEY EZS30-8
bkpn_clear: BESSEY EZS308
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey ezs one-hand clamps
sr_no_br_cl_ns: EZS308
sr_ns: BESSEYEZS30-8

_

BESSEY GH30 quick release clamp GH 300x140mm

• Max. clamping height: 300 mm
• Depth: 140 mm
• Type of chuck: F

On stock, immediately available.

Recommended Retail Price €131.29

73.80

€60.99 excl. VAT

[SEARCH SCORE
Sold desc:
1, 19822.075, 60.991 ]
query took: 1778913988.4787

layer :



r: 41210045
p: 60.991
pid: 41531
b: BESSEY
q: 30
st: 1
lt: 1
ean: 0788502200066
sr: BESSEY GH30
sr_no_br: GH30
sr_no_br_cl: GH30
sr_cl: BESSEYGH30
sr_dash:
sold: 19822.075
p_range: KLIUM_PRODUCT_RANGE_140
act: 1
avo: 1
av: Max. clamping height 300 mm Depth 140 mm Type of chuck F Clamping tool handle type Lever Clamping force 8500 N Weight 2,22 kg Product Range Bessey GH
n: BESSEY GH30 quick release clamp GH 300x140mm
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: Extra power reserve due to improved rail profile for even build-up of clamping force, especially at max. use of clamping depth Release button with slip protection Sintered steel eccentric, particularly wear-resistant, low friction due to higher surface hardness Up to 5 times faster than conventional clamps Safely insensitive to vibrations Strong clamping force of up to 8,500 N
ds:
dsc:
kts: quick release clamp GH 300x140mm
kpn: GH30
kpn_dash:
kpn_clear: GH30
bkpn: BESSEY GH30
bkpn_clear: BESSEY GH30
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey gh
sr_no_br_cl_ns: GH30
sr_ns: BESSEYGH30

_

BESSEY GH20 quick release clamp GH 200x100mm

• Max. clamping height: 200 mm
• Depth: 100 mm
• Type of chuck: F

On stock, immediately available.

Recommended Retail Price €95.95

64.20

€53.06 excl. VAT

[SEARCH SCORE
Sold desc:
1, 18888.292, 53.057 ]
query took: 1778913988.4787

layer :



r: 41210043
p: 53.057
pid: 39510
b: BESSEY
q: 11
st: 1
lt: 1
ean: 4008158034355
sr: BESSEY GH20
sr_no_br: GH20
sr_no_br_cl: GH20
sr_cl: BESSEYGH20
sr_dash:
sold: 18888.292
p_range: KLIUM_PRODUCT_RANGE_140
act: 1
avo: 1
av: Max. clamping height 200 mm Depth 100 mm Type of chuck F Clamping tool handle type Lever Clamping force 8500 N Weight 1,11 kg Product Range Bessey GH
n: BESSEY GH20 quick release clamp GH 200x100mm
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description Extra power reserve due to improved rail profile for even build-up of clamping force, especially at max. use of clamping depth Release button with slip protection Sintered steel eccentric, particularly wear-resistant, low friction due to higher surface hardness Up to 5 times faster than conventional pliers Safe - insensitive to vibrations Strong - clamping force of up to 8,500 N Safe locking mechanism The locking mechanism ensures metered, fast and vibration-resistant clamping. The particularly wear-resistant eccentric guarantees a long service life. Highest stability The optimised rail profile with greater power reserves enables even force build-up - especially when the clamping width is fully used. The one-piece forged fixed bracket with integrated pressure plate is refined and galvanised, allowing it to withstand very heavy loads and is torsion-free. Serrated sliding bracket The slide bracket is toothed and made of die-forged steel. For an extremely long service life. Ergonomic clamping and release button The powder-coated clamping lever is particularly ergonomically shaped. The plastic-coated release button with slip guard gives you a firm grip when releasing the clamp. Safety instructions Clamping tools are not suitable for lifting, pulling or transporting. Clamping tools should only be clamped by hand and without additional aids. Improper use may result in personal injury or property damage. Never modify or rework the clamping tool. Only use it in its original state. Use only original parts if necessary. Material/Surface Fixed and sliding bracket made of hardened steel, zinc-plated Lever made of cast zinc, powder-coated Connecting elements made of steel, zinc-plated or phosphated Release button made of plastic Maintenance Regular maintenance is necessary - only then can a secure grip be guaranteed (no slipping of the slide bar) Cleaning rails with solvent Always keep the rail free of grease, oil or dried glue, wax and silicone-based solvents Clean and lubricate the spindle regularly In case of shine formation on the rails, roughen both narrow sides with sanding cloth (100-grit paper) Clean and lubricate locking latch regularly
ds:
dsc:
kts: quick release clamp GH 200x100mm
kpn: GH20
kpn_dash:
kpn_clear: GH20
bkpn: BESSEY GH20
bkpn_clear: BESSEY GH20
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey gh
sr_no_br_cl_ns: GH20
sr_ns: BESSEYGH20

_

BESSEY quick release clamp GH 160x80mm - GH16

• Max. clamping height: 160 mm
• Depth: 80 mm
• Type of chuck: F

On stock, immediately available.

Recommended Retail Price €83.53

58.80

€48.59 excl. VAT

[SEARCH SCORE
Sold desc:
1, 17737.175, 48.595 ]
query took: 1778913988.4787

layer :



r: 41210042
p: 48.595
pid: 39360
b: BESSEY
q: 17
st: 1
lt: 1
ean: 4008158034331
sr: BESSEY GH16
sr_no_br: GH16
sr_no_br_cl: GH16
sr_cl: BESSEYGH16
sr_dash:
sold: 17737.175
p_range: KLIUM_PRODUCT_RANGE_140
type: standard
act: 1
avo: 1
av: Max. clamping height 160 mm Depth 80 mm Type of chuck F Clamping tool handle type Lever Clamping force 8500 N Weight 0,64 kg Product Range Bessey GH
n: BESSEY quick release clamp GH 160x80mm - GH16
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description Extra power reserve due to improved rail profile for even build-up of clamping force, especially at max. use of clamping depth Release button with slip protection Sintered steel eccentric, particularly wear-resistant, low friction due to higher surface hardness Up to 5 times faster than conventional pliers Safe - insensitive to vibrations Strong - clamping force of up to 8,500 N Safe locking mechanism The locking mechanism ensures metered, fast and vibration-resistant clamping. The particularly wear-resistant eccentric guarantees a long service life. Highest stability The optimised rail profile with greater power reserves enables even force build-up - especially when the clamping width is fully used. The one-piece forged fixed bracket with integrated pressure plate is refined and galvanised, allowing it to withstand very heavy loads and is torsion-free. Serrated sliding bracket The slide bracket is toothed and made of die-forged steel. For an extremely long service life. Ergonomic clamping and release button The powder-coated clamping lever is particularly ergonomically shaped. The plastic-coated release button with slip guard gives you a firm grip when releasing the clamp. Safety instructions Clamping tools are not suitable for lifting, pulling or transporting. Clamping tools should only be clamped by hand and without additional aids. Improper use may result in personal injury or property damage. Never modify or rework the clamping tool. Only use it in its original state. Use only original parts if necessary. Material/Surface Fixed and sliding bracket made of hardened steel, zinc-plated Lever made of cast zinc, powder-coated Connecting elements made of steel, zinc-plated or phosphated Release button made of plastic Maintenance Regular maintenance is necessary - only then can a secure grip be guaranteed (no slipping of the slide bar) Cleaning rails with solvent Always keep the rail free of grease, oil or dried glue, wax and silicone-based solvents Clean and lubricate the spindle regularly In case of shine formation on the rails, roughen both narrow sides with sanding cloth (100-grit paper) Clean and lubricate locking latch regularly
ds:
dsc:
kts: quick release clamp GH 160x80mm
kpn: GH16
kpn_dash:
kpn_clear: GH16
bkpn: BESSEY GH16
bkpn_clear: BESSEY GH16
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey gh
sr_no_br_cl_ns: GH16
sr_ns: BESSEYGH16

_

BESSEY one-handed gluing pliers EZS 150x80mm - EZS15-8

• Max. clamping height: 150 mm
• Max. spreading capacity: 360 mm
• Depth: 80 mm

On stock, immediately available.

Recommended Retail Price €36.75

22.80

€18.84 excl. VAT

[SEARCH SCORE
Sold desc:
1, 15864.964, 18.842 ]
query took: 1778913988.4788

layer :



r: 02067513
p: 18.842
pid: 39550
b: BESSEY
q: 18
st: 1
lt: 1
ean: 4008158034584
sr: BESSEY EZS15-8
sr_no_br: EZS15-8
sr_no_br_cl: EZS158
sr_cl: BESSEYEZS158
sr_dash: BESSEY EZS15
sold: 15864.964
p_range: KLIUM_PRODUCT_RANGE_139
type: standard
act: 1
avo: 1
av: Max. clamping height 150 mm Max. spreading capacity 360 mm Depth 80 mm Type of chuck F Clamping tool handle type Lever Clamping force 2000 N Weight 0,72 kg Product Range Bessey EZS One-Hand Clamps
n: BESSEY one-handed gluing pliers EZS 150x80mm - EZS15-8
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: Clamping force up to 2,000 N Can be converted to spreading without tools thanks to intelligent release mechanism on the upper jaw Ergonomically shaped 2-component plastic handle behind the rails ZB-packed
ds:
dsc:
kts: one-handed gluing pliers EZS 150x80mm
kpn: EZS15-8
kpn_dash: EZS15
kpn_clear: EZS158
bkpn: BESSEY EZS15-8
bkpn_clear: BESSEY EZS158
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey ezs one-hand clamps
sr_no_br_cl_ns: EZS158
sr_ns: BESSEYEZS15-8

_

BESSEY TU frame clamp 4-sided tube with mm scale 560-1010 mm

• Length: 565-1010 mm
• Clamping width: 1010 mm
• Max. clamping height: 1010 mm

On stock, immediately available.

Recommended Retail Price €111.65

81.20

€67.11 excl. VAT

[SEARCH SCORE
Sold desc:
1, 14495.112, 67.107 ]
query took: 1778913988.4788

layer :



r: 02503243
p: 67.107
pid: 39561
b: BESSEY
q: 4
st: 1
lt: 1
ean: 4008158001302
sr: BESSEY TU
sr_no_br: TU
sr_no_br_cl: TU
sr_cl: BESSEYTU
sr_dash:
sold: 14495.112
p_range: none
act: 1
avo: 1
av: Length 565-1010 mm Clamping width 1010 mm Max. clamping height 1010 mm
n: BESSEY TU frame clamp 4-sided tube with mm scale 560-1010 mm
cn: DOOR AND WINDOW INSTALLATION TOOL
cn2: DOOR AND WINDOW INSTALLATION TOOL
cn_clear: DOORANDWINDOWINSTALLATIONTOOL
d: Product description: Fixes and supports door liners when spraying foam into wall joints with precision and protection Anodised aluminium tube with telescopic function equipped with 4 sides with 4 mm scale and locking screw for precise work Cross-shaped pressure plate with adjustable clamping parts for covering depths of 6 to 13 cm or 13 to 30 cm respectively NEW:Adjustable clamping bracket with enlarged clamping surface and removable arms for safe and easy use of the standing frame
ds:
dsc:
kts: frame clamp 4-sided tube with mm scale 560-1010 mm
kpn: TU
kpn_dash:
kpn_clear: TU
bkpn: BESSEY TU
bkpn_clear: BESSEY TU
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Door and window installation tool | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey door and window installation tool
sr_no_br_cl_ns: TU
sr_ns: BESSEYTU

_

BESSEY GZ20 all-steel gluing pliers GZ 200x100mm

• Max. clamping height: 200 mm
• Depth: 100 mm
• Type of chuck: F

On stock, immediately available.

Recommended Retail Price €48.47

34.95

€28.88 excl. VAT

[SEARCH SCORE
Sold desc:
1, 12824.496, 28.884 ]
query took: 1778913988.4788

layer :



r: 41210068
p: 28.884
pid: 39863
b: BESSEY
q: 23
st: 1
lt: 1
ean: 4008158033914
sr: BESSEY GZ20
sr_no_br: GZ20
sr_no_br_cl: GZ20
sr_cl: BESSEYGZ20
sr_dash:
sold: 12824.496
p_range: KLIUM_PRODUCT_RANGE_149
type: standard
act: 1
avo: 1
av: Max. clamping height 200 mm Depth 100 mm Type of chuck F Clamping tool handle type Screwdriver handle Clamping force 6000 N Weight 0,95 kg Product Range Bessey GZ
n: BESSEY GZ20 all-steel gluing pliers GZ 200x100mm
cn: HAND CLAMP
cn2: HAND CLAMP
cn_clear: HANDCLAMP
d: Product description: 20 % more clamping force per spindle rotation due to optimised profile Best possible safety through rectilinear force transmission on the slide bar Clamping force of up to 6,000 N Refined sliding and fixed bracket for springy and elastic clamping Ergonomically shaped wooden handle Pressure plates exchangeable without tools (from 80 mm clamping depth)
ds:
dsc:
kts: all-steel gluing pliers GZ 200x100mm
kpn: GZ20
kpn_dash:
kpn_clear: GZ20
bkpn: BESSEY GZ20
bkpn_clear: BESSEY GZ20
c_path: Home / Tools / Hand tools / Clamping technology / Clamping tools / Hand clamp | Home / Our brands / Bessey / Bessey tools / Bessey hand tools / Bessey clamping technology / Bessey clamping tools / Bessey hand clamp | Home / Our brands / Bessey / Bessey Ranges / Bessey gz
sr_no_br_cl_ns: GZ20
sr_ns: BESSEYGZ20