Dependable Bahco puller for separators
- Powerful 4 t capacity: You safely remove stubborn components with a maximum load capacity of 4 t and a tightening torque of 70 Nm.
- Versatile 55-200 mm reach: Featuring an opening width of 55 to 200 mm and a span depth of 210 mm, you easily access deeply positioned parts.
- Designed for model 4551-C: You pair this device directly with the 4551-C bearing separator to smoothly withdraw bearings and gears from shafts.
With the Bahco 4552-2 auxiliary puller, you remove tight-fitting bearings, bushings, and gears from shafts safely and without damaging components. When standard arm pullers cannot find a grip behind the bearing race, you pair this tool directly with the Bahco 4551-C bearing separator. Featuring a wide clamping span of 55 to 200 mm and a maximum reach of 210 mm, it easily accesses deeply positioned parts. The rugged design delivers up to 4 t of mechanical pulling force at a maximum tightening torque of 70 Nm, giving you total control and efficiency during heavy maintenance and overhaul tasks in the workshop.
Product description:
- Extractor for separator
- Operation: The sharp tapered cutting edges of separator No. 4551 are pressed behind the part to be removed when tightening the stud nuts
- Use puller No. 4552 to withdraw separator and part from the shaft by tightening the rod nuts
- Opening capacity/span depth in mm:
- 4552-1: 45-140/150
- 4552-2: 55-200/210
- 4552-3: 90-260/315
- 4552/B: Spare body
- 4552K: Spare tie rod
- 4532/S: Spare spindle
- 4532-OAB/S: for 4552-1 (M14x1.5x135, SW 17, 175 g)
- 4532-CD/S for 4552-2 and 4552-3 (G1/2"x14x210, SW 22, 575 g)