Anti-slip mats to secure loads and cargo in transport

Anti-slip mats for load securing go between the load and the loading floor, or between layers of the load, to raise friction so the load shifts less when braking and cornering. They belong to load and cargo securing and work together with the lashing gear that holds the load down on the floor.

All mats here are Rema, in strips and square pieces. A 250 x 5000 mm strip is cut to the length you need, while squares of 250 x 250 mm and 500 x 500 mm go straight under pallets, crates and machines. There are also strips of 200 x 2400 mm and 130 x 600 mm, and thicknesses of 6 and 8 mm.

Choose the size by the load's bearing surface: the mat has to lie under every support point, otherwise the load rests on a part without grip. A thicker mat absorbs unevenness in the loading floor better. Keep the mats clean and dry, because oil and sand reduce friction. An anti-slip mat does not replace the lashing strap; where the strap runs over a sharp edge, protect it with corner protectors for lashing straps.