r: 08075286 p: 27.851 pid: 30826 b: WIHA q: 4 st: 1 lt: 1 ean: 4010995437978 sr: WIHA 43797 sr_no_br: 43797 sr_no_br_cl: 43797 sr_cl: WIHA43797 sr_dash: sold: 4066.246 p_range: none type: standard act: 1 avo: 1 av: n: WIHA SB25513 voltage detector Volt detector non-contact unipolar 12-1000V AC incl. 2x AAA batteries - 43797 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Product description Saves time: Rapid voltage test thanks to contactless measuring. Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage. Increases your efficiency: Integrated powerful LED flashlight. Increases your flexibility: The voltage tester covers a large voltage range from 12 - 1,000 V AC. Product dimensions: 240 x 29 x 49 mm (LxWxD) Application: Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires. Measuring category: CAT IV 1.000 V Voltage 12 - 1,000 V AC Cat IV, 1,000 V One-handed test 5-level optical signal Acoustic signal can be switched on and off Integrated flashlight function Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage. A voltage tester is required to test alternating electric fields or probable sources of error. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates that the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field. Two AAA batteries are required to operate the device. These are included in the delivery. The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 V AC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. IEC/EN 61010-1, IEC/EN 61326, IP67 ds: dsc: kts: voltage detector Volt detector non-contact unipolar 12-1000V AC incl. 2x AAA batteries kpn: SB25513 kpn_dash: kpn_clear: SB25513 bkpn: WIHA SB25513 bkpn_clear: WIHA SB25513 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Voltage tester | Home / Our brands / Wiha / Wiha tools / Wiha measuring and inspection technique / Wiha analogue measuring and inspection instruments / Wiha analogue measuring instruments / Wiha voltage tester sr_no_br_cl_ns: 43797 sr_ns: WIHA43797
r: 08075288 p: 15.95 pid: 30779 b: WIHA q: 2 st: 1 lt: 1 ean: 4010995437985 sr: WIHA 43798 sr_no_br: 43798 sr_no_br_cl: 43798 sr_cl: WIHA43798 sr_dash: sold: 1355.75 p_range: none type: standard act: 1 avo: 1 av: n: WIHA SB25514 voltage detector Volt detector non-contact unipolar 90-1000V AC incl. 2x AAA batteries - 43798 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Product description Saves time: Rapid voltage test thanks to contactless measuring. Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage. Product dimensions: 240 x 29 x 49 mm (LxWxD) Application: Used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires. Measuring category: CAT IV 1.000 V Voltage 90 - 1,000 V AC Cat IV, 1,000 V One-handed test Optical signal Before starting electrical installation work, electricians need to guarantee that their work environment is free of any live voltage. A voltage tester is required to test alternating electric fields or probable sources of error. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical signal. Once the tester is switched on, the permanently green LED indicates that the tester is ready for use. If a voltage is detected, the red LED lights up, which can also be easily seen in daylight. Two AAA batteries are required to operate the device. These are included in the delivery. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. The voltage tester is suitable for all socket variants worldwide thanks to its measurement tip adapted to international usage. Designed for CAT IV 1,000 V AC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. IEC/EN 61010-1, IEC/EN 61326, IP67 ds: dsc: kts: voltage detector Volt detector non-contact unipolar 90-1000V AC incl. 2x AAA batteries kpn: SB25514 kpn_dash: kpn_clear: SB25514 bkpn: WIHA SB25514 bkpn_clear: WIHA SB25514 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Voltage tester | Home / Our brands / Wiha / Wiha tools / Wiha measuring and inspection technique / Wiha analogue measuring and inspection instruments / Wiha analogue measuring instruments / Wiha voltage tester sr_no_br_cl_ns: 43798 sr_ns: WIHA43798
r: 08075287 p: 47.024 pid: 31129 b: WIHA q: 0 st: lt: 10 ean: 4010995443092 sr: WIHA 44309 sr_no_br: 44309 sr_no_br_cl: 44309 sr_cl: WIHA44309 sr_dash: sold: 1269.648 p_range: none type: standard act: 1 avo: 1 av: n: WIHA SB2551301 voltage detector Volt detector EX protected contactless unipolar 12-1000V AC incl. 2x AAA batteries - 44309 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Product description Increases your efficiency: Integrated powerful LED flashlight. Saves time: Rapid voltage test thanks to contactless measuring. Increases your flexibility: The voltage tester covers a large voltage range from 12 - 1,000 V AC. Increases your efficiency: Compatible for use in all sockets worldwide thanks to measurement tip suited to international usage. Product dimensions: 240 x 29 x 49 mm (LxWxD) Application: For the detection and localization of live conductors, cable interruptions and cable breaks, blown fuses, defective lamps on light strings, as well as detection of individual wires. Measuring category: CAT IV 1,000 V Standards: EPS 22 UKEX 1 333 X, EPS 19 ATEX 1 223 X Voltage 12 - 1,000 V AC CAT IV, 1,000 V, ATEX certified One-handed test 5-level optical signal Acoustic signal can be switched on and off Integrated flashlight function Prior to the start of electrical installations, electricians must ensure that the work environment is voltage free. A voltage tester is needed for testing alternating electrical fields or detecting potential error sources. Thanks to its optical and acoustic signal, the non-contact Wiha voltage tester indicates whether or not there is any voltage. After switching on, the permanently green illuminated LED indicates readiness. During the voltage test, depending on the strength of the electrical alternating field, the LEDs are illuminated from blue (weak), 'to' orange, to red (strong). Two AAA batteries are required for use, which are included in the scope of delivery. If the device is not in use for 4 minutes, it switches off automatically to save energy. An integrated LED flashlight allows illumination of the measurement site in the dark and can also be used as a flashlight by manually switching it on and off. Thanks to its convenient size the voltage tester with push-on clip fits comfortably in any shirt or pant pocket. With its internationally adjustable measuring tip, the voltage tester is suitable for all outlet variations around the world. The single-pole voltage tester complies with the EN 61010-1 / IEC 61326 standard and is compatible with CAT IV 1,000 VAC. Furthermore,the tool is approved according to the ATEX standard for use in explosive areas (category II). The device should be tested on a known voltage source before and after use to ensure its functionality. IEC/EN 61010-1, IEC/EN 61326, IP67 ds: dsc: kts: voltage detector Volt detector EX protected contactless unipolar 12-1000V AC incl. 2x AAA batteries kpn: SB2551301 kpn_dash: kpn_clear: SB2551301 bkpn: WIHA SB2551301 bkpn_clear: WIHA SB2551301 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Voltage tester | Home / Our brands / Wiha / Wiha tools / Wiha measuring and inspection technique / Wiha analogue measuring and inspection instruments / Wiha analogue measuring instruments / Wiha voltage tester sr_no_br_cl_ns: 44309 sr_ns: WIHA44309
