- Min. tightening torque: 0,8 Nm
- Quantity per set: 14
- Supplied in: Case
Wiha torque screwdriver sets and easyTorque adapters, 0.8-5.0 Nm
Wiha torque screwdriver sets combine a torque handle with bits or adapters, so you tighten screws to a set torque. That prevents damaged screw connections in switch cabinets, electronics and precision assembly.
Look at the torque range first. TorqueVario-S sets are variably adjustable, with ranges from 0.4 to 1.0 Nm for fine work, 0.8 to 5.0 Nm for most terminals and screws, and up to 14 Nm with a cross handle. If you work on installations, choose the electric version; for sensitive electronics there is an ESD set. The sets come in a box or folding case with bits for the common profiles, Torx and Torx Plus included.
If you always tighten to one fixed value, an easyTorque set is enough: an adapter with a fixed torque, for example 0.8, 2.0 or 2.8 Nm, with a slimVario holder and slimBits. For round connectors there are TorqueFix sets with a cable spanner, which tighten the nut to the right torque without damaging the connector. Single adapters are among the Wiha easyTorque adapters and interchangeable shanks, part of the Wiha torque tools.
- Min. tightening torque: 0,8 Nm
- Quantity per set: 19
- Supplied in: Case
- Product Range: Wiha TorqueVario
- Product Range: Wiha TorqueVario
- Product Range: Wiha TorqueVario
- Min. tightening torque: 0,8 Nm
- Max. tightening torque: 5 Nm
- Product Range: Wiha TorqueVario
- Product Range: Wiha TorqueVario
- Product Range: Wiha easyTorque
- Product Range: Wiha easyTorque
- Product Range: Wiha TorqueVario
- Product Range: Wiha TorqueVario
- Product Range: Wiha TorqueVario