r: 02835962 p: 65.785 pid: 42155 b: WERA q: 0 st: lt: 12 ean: 4013288102935 sr: WERA 05074717001 sr_no_br: 05074717001 sr_no_br_cl: 05074717001 sr_cl: WERA05074717001 sr_dash: sold: 131.57 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 3-6 Nm Max. tightening torque 6 Nm Product Range Wera Kraftform n: WERA 7462 Kraftform adjustable pistol grip torque screwdriver with Rapidaptor quick-change holder 3.0 Nm x 3.0-6.0 Nm - 05074717001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with pistol handle Rapidaptor quick-release chuck Rapidaptor technology for rapid bit change Suitable for bits with 1/4" hex head drive Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 3.0 Nm, 4.0 Nm Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (3.0-8.8 Nm) and Rapidaptor quick-release chuck, pistol handle, 7462 x 3.0 Nm x 3.0-6.0 Nm kts: Kraftform adjustable pistol grip torque screwdriver with Rapidaptor quick-change holder 3.0 Nm x 3.0-6.0 Nm kpn: 7462 kpn_dash: kpn_clear: 7462 bkpn: WERA 7462 bkpn_clear: WERA 7462 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074717001 sr_ns: WERA05074717001
r: 08103767 p: 40.33 pid: 71567 b: WERA q: 0 st: lt: 8 ean: 4013288229359 sr: WERA 05020171001 sr_no_br: 05020171001 sr_no_br_cl: 05020171001 sr_cl: WERA05020171001 sr_dash: sold: 120.99 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 16 - 19 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle Product Range Wera Joker n: WERA 7880 Joker L self-adjusting insert spanner for spanner size 16-19 mm, 14 x 18 mm - 05020171001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Self-setting insert spanner, for hexagon screw heads and bolts, for torque wrenches from the Click-Torque X and XP series with 14x18 mm mounting. Covers all metric and imperial dimensions in the respective field of application. With its continuous and parallel jaws, the tool replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a return angle of only 30° can be achieved. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting For hexagon screw heads and bolts with wrench sizes 16.0; 17.0; 18.0; 19.0 (metric) For hexagon screw heads and bolts with wrench sizes 5/8"; 11/16"; 3/4" (imperial) Automatically and continuously gripping hexagonal screws and bolts Application Hexagonal screw heads and bolts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm mounting Design Self-setting spanner with ratchet functionality; open end adjustable in size, parallel smooth jaws; with 30° return angle via the corner-width prisms in the jaw Features and benefits The laser-engraved, abrasion-proof QR code makes it easier to determine the correct torque value depending on the torque wrench and insert tool used. Simply scan with your smartphone or tablet (if available, both QR codes: torque wrench and insert tool). A website opens automatically which recognizes the scanned tools (no app needed!). Then enter the required torque value; the corrected value is determined automatically. No need to use formulas/calculations. For torque wrenches from the Click-Torque X series with 14x18 mm mounting. With its automatically and continuously gripping parallel jaws, the 7880 Joker covers all dimensions within the potential operative range. The tool finds the required size by itself when attaching it to the bolt or screw. The parallel, smooth jaws of the 7880 Joker offer a seating stress and can thus prevent the nut or screw head from rounding, which can occur when power is transmitted over corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7880 Joker L Self-setting insert spanner for wrench sizes 16-19 mm, 14x18mm, 14x18 x 16-19 x 5/8-3/4" x 85.5 mm kts: self-adjusting insert spanner for spanner size 16-19 mm, 14 x 18 mm kpn: 7880 Joker L kpn_dash: kpn_clear: 7880JokerL bkpn: WERA 7880 Joker L bkpn_clear: WERA 7880JokerL c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020171001 sr_ns: WERA05020171001
r: 02835995 p: 117.685 pid: 42063 b: WERA q: 0 st: lt: 12 ean: 4013288179173 sr: WERA 05074784001 sr_no_br: 05074784001 sr_no_br_cl: 05074784001 sr_cl: WERA05074784001 sr_dash: sold: 117.685 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7432 ESD Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm - 05074784001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7432 ESD x 0.90-1.50 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm kpn: 7432 ESD kpn_dash: kpn_clear: 7432ESD bkpn: WERA 7432 ESD bkpn_clear: WERA 7432ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074784001 sr_ns: WERA05074784001
r: 03229807 p: 38.512 pid: 71062 b: WERA q: 0 st: lt: 13 ean: 4013288196873 sr: WERA 05078685001 sr_no_br: 05078685001 sr_no_br_cl: 05078685001 sr_cl: WERA05078685001 sr_dash: sold: 115.536 p_range: none type: standard act: 1 avo: 1 av: Width across flats 36 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 36 x 61 mm - 05078685001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 36 x 69.6 mm kts: socket spanner 14x18 mm, 36 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078685001 sr_ns: WERA05078685001
r: 02953124 p: 114.214 pid: 31108 b: WERA q: 1 st: 1 lt: 1 ean: 4013288206183 sr: WERA 05075672001 sr_no_br: 05075672001 sr_no_br_cl: 05075672001 sr_cl: WERA05075672001 sr_dash: sold: 114.214 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 15 Nm Drive profile size 9 x 12 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 15-100 Nm Max. tightening torque 100 Nm Product Range Wera Click-Torque n: WERA Click-Torque XP 3 torque spanner with standard settings for plug-in tools, 15-100 Nm, 15 Nm - 05075672001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Torque wrench with pre-set torque value for all applications where the same torque and repeat accuracy is required. The torque value can be changed within the metered range. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque value is reached. Square socket for interchangeable plug-in tools for clockwise and anti-clockwise torque-control. A presetting which deviates from this value to a desired torque value within the specified metered range is possible on request. Pre-set click torque wrench in unmistakable Wera design Audible and tactile release mechanism when the set torque value is reached Pre-set torque values can be changed within the metered range in the test laboratory Measuring range: 15-100 Nm; precise to ± 2% as per DIN EN ISO 6789-1:2017-07 With square socket (9x12 mm) for interchangeable plug-in tools; clockwise and anti-clockwise torque-control Application For right and left-handed use Pre-set torque 15.0 Nm Precision ± 2% of set value, as per DIN EN ISO 6789-1: 2017-07 Design For 9x12 mm interchangeable insert tools; audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). The Click-Torque XP torque wrenches are provided with pre-set torque values. These tools are ideal for all applications where the same torque and repeat accuracy is required. For 9x12 mm interchangeable insert tools. Precise to ± 2% as per DIN EN ISO 6789-1:2017-07. On reaching the desired torque value, an audible and tactile mechanism is triggered. The Click-Torque wrenches for insert tools are suitable forclockwise and counterclockwise uses. The Click-Torque XP torque wrenches with a pre-set torque value can be set to any value within the specified metered range in the test laboratory. ds: dsc: Scope of delivery Click-Torque XP 3 pre-set adjustable torque wrench for insert tools, 15-100 Nm, 15 Nm, 9x12 x 15.0 Nm x 15-100 Nm kts: torque spanner with standard settings for plug-in tools, 15-100 Nm, 15 Nm kpn: Click-Torque XP 3 kpn_dash: Click kpn_clear: ClickTorqueXP3 bkpn: WERA Click-Torque XP 3 bkpn_clear: WERA ClickTorqueXP3 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075672001 sr_ns: WERA05075672001
r: 02953106 p: 110.578 pid: 31150 b: WERA q: 0 st: lt: 15 ean: 4013288206169 sr: WERA 05075670001 sr_no_br: 05075670001 sr_no_br_cl: 05075670001 sr_cl: WERA05075670001 sr_dash: sold: 110.578 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Drive profile size 9 x 12 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 2,5-25 Nm Max. tightening torque 25 Nm Product Range Wera Click-Torque n: WERA Click-Torque XP 1 torque spanner with standard settings for insert tools, 2.5-25 Nm, 2.5 Nm - 05075670001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Torque wrench with pre-set torque value for all applications where the same torque and repeat accuracy is required. The torque value can be changed within the metered range. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque value is reached. Square socket for interchangeable plug-in tools for clockwise and anti-clockwise torque-control. A presetting which deviates from this value to a desired torque value within the specified metered range is possible on request. Pre-set click torque wrench in unmistakable Wera design Audible and tactile release mechanism when the set torque value is reached Pre-set torque values can be changed within the metered range in the test laboratory Measuring range: 2.5-25 Nm; precise to ± 2% as per DIN EN ISO 6789-1:2017-07 With square socket (9x12 mm) for interchangeable plug-in tools; clockwise and anti-clockwise torque-control Application For right and left-handed use Pre-set torque 2.5 Nm Precision ± 2% of set value, as per DIN EN ISO 6789-1: 2017-07 Design For 9x12 mm interchangeable insert tools; audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). The Click-Torque XP torque wrenches are provided with pre-set torque values. These tools are ideal for all applications where the same torque and repeat accuracy is required. For 9x12 mm interchangeable insert tools. Precise to ± 2% as per DIN EN ISO 6789-1:2017-07. The Click-Torque wrenches for insert tools are suitable forclockwise and counterclockwise uses. The Click-Torque XP torque wrenches with a pre-set torque value can be set to any value within the specified metered range in the test laboratory. ds: dsc: Scope of delivery Click-Torque XP 1 pre-set adjustable torque wrench for insert tools, 2.5-25 Nm, 2.5 Nm, 9x12 x 2.5 Nm x 2.5-25 Nm kts: torque spanner with standard settings for insert tools, 2.5-25 Nm, 2.5 Nm kpn: Click-Torque XP 1 kpn_dash: Click kpn_clear: ClickTorqueXP1 bkpn: WERA Click-Torque XP 1 bkpn_clear: WERA ClickTorqueXP1 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075670001 sr_ns: WERA05075670001
r: 02835991 p: 107.272 pid: 41722 b: WERA q: 0 st: lt: 12 ean: 4013288179159 sr: WERA 05074780001 sr_no_br: 05074780001 sr_no_br_cl: 05074780001 sr_cl: WERA05074780001 sr_dash: sold: 107.272 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7430 ESD Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.10-0.34 Nm - 05074780001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7430 ESD x 0.10-0.34 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.10-0.34 Nm kpn: 7430 ESD kpn_dash: kpn_clear: 7430ESD bkpn: WERA 7430 ESD bkpn_clear: WERA 7430ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074780001 sr_ns: WERA05074780001
r: 41071098 p: 35.702 pid: 71145 b: WERA q: 0 st: lt: 13 ean: 4013288093370 sr: WERA 05027934001 sr_no_br: 05027934001 sr_no_br_cl: 05027934001 sr_cl: WERA05027934001 sr_dash: sold: 107.106 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Drive size T10 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 2 Nm Max. tightening torque 2 Nm n: WERA 300 TX torque indicator TORX, TX 10 x 2.0 Nm - 05027934001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 10 x 2.0 Nm kts: torque indicator TORX, TX 10 x 2.0 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027934001 sr_ns: WERA05027934001
r: 02012166 p: 51.074 pid: 42382 b: WERA q: 0 st: lt: 10 ean: 4013288099143 sr: WERA 05027936001 sr_no_br: 05027936001 sr_no_br_cl: 05027936001 sr_cl: WERA05027936001 sr_dash: sold: 102.148 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size T20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 TX torque indicator TORX with pistol grip, TX 20 x 5.0 Nm - 05027936001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform pistol handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, pistol handle, TX 20 x 5.0 Nm kts: torque indicator TORX with pistol grip, TX 20 x 5.0 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027936001 sr_ns: WERA05027936001
r: 02953232 p: 49.421 pid: 33598 b: WERA q: 0 st: lt: 15 ean: 4013288208835 sr: WERA 05005080001 sr_no_br: 05005080001 sr_no_br_cl: 05005080001 sr_cl: WERA05005080001 sr_dash: sold: 98.842 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Drive size HEX 4 mm Drive type Outer hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4 Nm Max. tightening torque 4 Nm n: WERA 400 Hex torque indicator 4 x 4.0 Nm - 05005080001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for hexagon sockets. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application Hexagon socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Hex-Plus, brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Torque-indicator with pre-set and tamperproof torque value Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 Hex Torque-indicator, 4 mm x 4.0 Nm kts: torque indicator 4 x 4.0 Nm kpn: 400 Hex kpn_dash: kpn_clear: 400Hex bkpn: WERA 400 Hex bkpn_clear: WERA 400Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005080001 sr_ns: WERA05005080001
r: 03229799 p: 32.892 pid: 70106 b: WERA q: 0 st: lt: 13 ean: 4013288196804 sr: WERA 05078678001 sr_no_br: 05078678001 sr_no_br_cl: 05078678001 sr_cl: WERA05078678001 sr_dash: sold: 98.676 p_range: none type: standard act: 1 avo: 1 av: Width across flats 22 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 22 x 61 mm - 05078678001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 22 x 62.1 mm kts: socket spanner 14x18 mm, 22 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078678001 sr_ns: WERA05078678001
r: 03229767 p: 23.305 pid: 70513 b: WERA q: 0 st: lt: 11 ean: 4013288196095 sr: WERA 05078601001 sr_no_br: 05078601001 sr_no_br_cl: 05078601001 sr_cl: WERA05078601001 sr_dash: sold: 93.22 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) Outer rectangle n: WERA 7770 socket spanner 9x12 mm, 8 x 39 mm - 05078601001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 8 x 39.5 mm kts: socket spanner 9x12 mm, 8 x 39 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078601001 sr_ns: WERA05078601001
r: 41071094 p: 30.909 pid: 70459 b: WERA q: 0 st: lt: 13 ean: 4013288093325 sr: WERA 05027930001 sr_no_br: 05027930001 sr_no_br_cl: 05027930001 sr_cl: WERA05027930001 sr_dash: sold: 92.727 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,6 Nm Drive size T6 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,6 Nm Max. tightening torque 0,6 Nm n: WERA 300 TX torque indicator TORX, TX 6 x 0.6 Nm - 05027930001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 6 x 0.6 Nm kts: torque indicator TORX, TX 6 x 0.6 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027930001 sr_ns: WERA05027930001
r: 02042909 p: 45.785 pid: 42808 b: WERA q: 0 st: lt: 10 ean: 4013288102911 sr: WERA 05074715001 sr_no_br: 05074715001 sr_no_br_cl: 05074715001 sr_cl: WERA05074715001 sr_dash: sold: 91.57 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074715001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 kpn_dash: kpn_clear: 7460 bkpn: WERA 7460 bkpn_clear: WERA 7460 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074715001 sr_ns: WERA05074715001
r: 03229639 p: 87.768 pid: 71795 b: WERA q: 0 st: lt: 8 ean: 4013288188168 sr: WERA 05074717010 sr_no_br: 05074717010 sr_no_br_cl: 05074717010 sr_cl: WERA05074717010 sr_dash: sold: 87.768 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 3-6 Nm Max. tightening torque 6 Nm Product Range Wera Kraftform n: WERA 7462 Kraftform torque screwdriver with pistol grip 3.0-6.0 Nm - 05074717010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Unlimited torque for loosening seized screws. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7462 x 3.0-6.0 Nm kts: Kraftform torque screwdriver with pistol grip 3.0-6.0 Nm kpn: 7462 kpn_dash: kpn_clear: 7462 bkpn: WERA 7462 bkpn_clear: WERA 7462 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074717010 sr_ns: WERA05074717010
r: 03229772 p: 21.652 pid: 69776 b: WERA q: 0 st: lt: 11 ean: 4013288196040 sr: WERA 05078606001 sr_no_br: 05078606001 sr_no_br_cl: 05078606001 sr_cl: WERA05078606001 sr_dash: sold: 86.608 p_range: none type: standard act: 1 avo: 1 av: Width across flats 13 mm Connection size (wrench) 9 x 12 mm Connection type (wrench) Outer rectangle n: WERA 7770 socket spanner 9x12 mm, 13 x 41 mm - 05078606001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7770 Open end insert, 9x12 mm, 9x12 x 13 x 40.6 mm kts: socket spanner 9x12 mm, 13 x 41 mm kpn: 7770 kpn_dash: kpn_clear: 7770 bkpn: WERA 7770 bkpn_clear: WERA 7770 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078606001 sr_ns: WERA05078606001
r: 03229725 p: 84.958 pid: 70502 b: WERA q: 0 st: lt: 13 ean: 4013288188236 sr: WERA 05074840010 sr_no_br: 05074840010 sr_no_br_cl: 05074840010 sr_cl: WERA05074840010 sr_dash: sold: 84.958 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver 0.3-1.2 Nm - 05074840010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 ESD x 0.3-1.2 Nm kts: Kraftform torque screwdriver 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840010 sr_ns: WERA05074840010
r: 02836055 p: 40.991 pid: 42191 b: WERA q: 0 st: lt: 11 ean: 4013288024183 sr: WERA 05078345001 sr_no_br: 05078345001 sr_no_br_cl: 05078345001 sr_cl: WERA05078345001 sr_dash: sold: 81.982 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/2" Connection profile Outer rectangle n: WERA 7783 C insert tool with square, 14x18 mm, 1/2" x 65 mm - 05078345001 cn: SQUARE DRIVE HEAD cn2: SQUARE DRIVE HEAD cn_clear: SQUAREDRIVEHEAD d: Product description Square drive insert, for 1/2" square socket wrench inserts and 1/2" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting With safety pin For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7783 C Square drive insert, 14x18 mm, 14x18 x 1/2" x 65 mm kts: insert tool with square, 14x18 mm, 1/2" x 65 mm kpn: 7783 C kpn_dash: kpn_clear: 7783C bkpn: WERA 7783 C bkpn_clear: WERA 7783C c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Square drive head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera square drive head sr_no_br_cl_ns: 05078345001 sr_ns: WERA05078345001
r: 03229795 p: 26.776 pid: 69778 b: WERA q: 0 st: lt: 11 ean: 4013288196767 sr: WERA 05078674001 sr_no_br: 05078674001 sr_no_br_cl: 05078674001 sr_cl: WERA05078674001 sr_dash: sold: 80.328 p_range: none type: standard act: 1 avo: 1 av: Width across flats 17 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 17 x 58 mm - 05078674001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 17 x 58.6 mm kts: socket spanner 14x18 mm, 17 x 58 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078674001 sr_ns: WERA05078674001
r: 03229788 p: 26.611 pid: 71817 b: WERA q: 0 st: lt: 11 ean: 4013288196729 sr: WERA 05078670001 sr_no_br: 05078670001 sr_no_br_cl: 05078670001 sr_cl: WERA05078670001 sr_dash: sold: 79.833 p_range: none type: standard act: 1 avo: 1 av: Width across flats 13 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 13 x 56 mm - 05078670001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 13 x 58 mm kts: socket spanner 14x18 mm, 13 x 56 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078670001 sr_ns: WERA05078670001
