r: 03229638 p: 65.619 pid: 70079 b: WERA q: 0 st: lt: 8 ean: 4013288188151 sr: WERA 05074716010 sr_no_br: 05074716010 sr_no_br_cl: 05074716010 sr_cl: WERA05074716010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm - 05074716010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 x 1.2-3.0 Nm kts: Kraftform torque screwdriver with fixed preset measuring range 1.2-3.0 Nm kpn: 7461 kpn_dash: kpn_clear: 7461 bkpn: WERA 7461 bkpn_clear: WERA 7461 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074716010 sr_ns: WERA05074716010
r: 03229630 p: 64.793 pid: 71782 b: WERA q: 0 st: lt: 8 ean: 4013288188106 sr: WERA 05074790010 sr_no_br: 05074790010 sr_no_br_cl: 05074790010 sr_cl: WERA05074790010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074790010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 x 0.1-0.34 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7450 kpn_dash: kpn_clear: 7450 bkpn: WERA 7450 bkpn_clear: WERA 7450 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074790010 sr_ns: WERA05074790010
r: 03229736 p: 64.793 pid: 71803 b: WERA q: 0 st: lt: 12 ean: 4013288188250 sr: WERA 05074720010 sr_no_br: 05074720010 sr_no_br_cl: 05074720010 sr_cl: WERA05074720010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform torque screwdriver 2.5-11.5 in. lbs. - 05074720010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Series 7400 Imperial Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7465 x 2.5-11.5 in. lbs. kts: Kraftform torque screwdriver 2.5-11.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720010 sr_ns: WERA05074720010
r: 02012167 p: 60.661 pid: 42388 b: WERA q: 0 st: lt: 12 ean: 4013288099136 sr: WERA 05028046001 sr_no_br: 05028046001 sr_no_br_cl: 05028046001 sr_cl: WERA05028046001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size IP20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 IP torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm - 05028046001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX PLUS® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform pistol handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application TORX PLUS® socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 IP TORX PLUS® Torque-indicator, pistol handle, 20 IP x 5.0 Nm kts: torque indicator with pistol grip TORX PLUS, 20 IP x 5.0 Nm kpn: 300 IP kpn_dash: kpn_clear: 300IP bkpn: WERA 300 IP bkpn_clear: WERA 300IP c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05028046001 sr_ns: WERA05028046001
r: 02815104 p: 54.38 pid: 44444 b: WERA q: 0 st: lt: 8 ean: 4013288099150 sr: WERA 05027913001 sr_no_br: 05027913001 sr_no_br_cl: 05027913001 sr_cl: WERA05027913001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 4 mm ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 Hex torque indicator with pistol grip, 4 x 5.0 Nm - 05027913001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for hexagon socket screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application Hexagon socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Hex-Plus, Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 Hex Torque-indicator, pistol handle, 4 mm x 5.0 Nm kts: torque indicator with pistol grip, 4 x 5.0 Nm kpn: 300 Hex kpn_dash: kpn_clear: 300Hex bkpn: WERA 300 Hex bkpn_clear: WERA 300Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027913001 sr_ns: WERA05027913001
r: 03229810 p: 49.752 pid: 71065 b: WERA q: 0 st: lt: 12 ean: 4013288196897 sr: WERA 05078687001 sr_no_br: 05078687001 sr_no_br_cl: 05078687001 sr_cl: WERA05078687001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 41 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 41 x 61 mm - 05078687001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 41 x 73.8 mm kts: socket spanner 14x18 mm, 41 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078687001 sr_ns: WERA05078687001
r: 02953265 p: 49.421 pid: 32772 b: WERA q: 0 st: lt: 15 ean: 4013288208842 sr: WERA 05005081001 sr_no_br: 05005081001 sr_no_br_cl: 05005081001 sr_cl: WERA05005081001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 5 mm Drive type Outer hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 Hex torque indicator 5 x 5.0 Nm - 05005081001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for hexagon sockets. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application Hexagon socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Hex-Plus, brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Torque-indicator with pre-set and tamperproof torque value Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 Hex Torque-indicator, 5 mm x 5.0 Nm kts: torque indicator 5 x 5.0 Nm kpn: 400 Hex kpn_dash: kpn_clear: 400Hex bkpn: WERA 400 Hex bkpn_clear: WERA 400Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005081001 sr_ns: WERA05005081001
r: 41973941 p: 47.272 pid: 71384 b: WERA q: 0 st: lt: 12 ean: 4013288102942 sr: WERA 05074720001 sr_no_br: 05074720001 sr_no_br_cl: 05074720001 sr_cl: WERA05074720001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Inner hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7465 Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. - 05074720001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7465 x 2.5 in. lbs. kts: Kraftform adjustable torque screwdriver with standard settings with Rapidaptor quick-change holder 2.5 in. lbs. kpn: 7465 kpn_dash: kpn_clear: 7465 bkpn: WERA 7465 bkpn_clear: WERA 7465 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074720001 sr_ns: WERA05074720001
r: 03229847 p: 46.776 pid: 71860 b: WERA q: 0 st: lt: 8 ean: 4013288196699 sr: WERA 05078703001 sr_no_br: 05078703001 sr_no_br_cl: 05078703001 sr_cl: WERA05078703001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 34 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 34 x 81 mm - 05078703001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 34 x 81 mm kts: insert-ring spanner 14x18 mm, 34 x 81 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078703001 sr_ns: WERA05078703001
r: 03229846 p: 46.776 pid: 71074 b: WERA q: 0 st: lt: 8 ean: 4013288196682 sr: WERA 05078702001 sr_no_br: 05078702001 sr_no_br_cl: 05078702001 sr_cl: WERA05078702001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 32 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert ring spanner 14x18 mm, 32 x 81 mm - 05078702001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 32 x 76.5 mm kts: insert ring spanner 14x18 mm, 32 x 81 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078702001 sr_ns: WERA05078702001
r: 03229850 p: 46.776 pid: 71078 b: WERA q: 0 st: lt: 8 ean: 4013288196712 sr: WERA 05078705001 sr_no_br: 05078705001 sr_no_br_cl: 05078705001 sr_cl: WERA05078705001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 41 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert ring spanner 14x18 mm, 41 x 81 mm - 05078705001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 41 x 87.1 mm kts: insert ring spanner 14x18 mm, 41 x 81 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078705001 sr_ns: WERA05078705001
r: 02953272 p: 43.14 pid: 31170 b: WERA q: 0 st: lt: 15 ean: 4013288208828 sr: WERA 05005091001 sr_no_br: 05005091001 sr_no_br_cl: 05005091001 sr_cl: WERA05005091001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size T25 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 TX torque indicator TX 25 x 5.0 Nm - 05005091001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for TORX® screws. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application TORX® socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Screwdrivers with T-handle Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. ds: dsc: Scope of delivery 400 TX Torque-indicator, TX 25 x 5.0 Nm kts: torque indicator TX 25 x 5.0 Nm kpn: 400 TX kpn_dash: kpn_clear: 400TX bkpn: WERA 400 TX bkpn_clear: WERA 400TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005091001 sr_ns: WERA05005091001
r: 02953269 p: 43.14 pid: 31124 b: WERA q: 0 st: lt: 15 ean: 4013288208811 sr: WERA 05005090001 sr_no_br: 05005090001 sr_no_br_cl: 05005090001 sr_cl: WERA05005090001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Drive size T20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4 Nm Max. tightening torque 4 Nm n: WERA 400 TX torque indicator TX 20 x 4.0 Nm - 05005090001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for TORX® screws. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application TORX® socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Screwdrivers with T-handle Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. ds: dsc: Scope of delivery 400 TX Torque-indicator, TX 20 x 4.0 Nm kts: torque indicator TX 20 x 4.0 Nm kpn: 400 TX kpn_dash: kpn_clear: 400TX bkpn: WERA 400 TX bkpn_clear: WERA 400TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005090001 sr_ns: WERA05005090001
r: 03229809 p: 42.644 pid: 71833 b: WERA q: 0 st: lt: 12 ean: 4013288196880 sr: WERA 05078686001 sr_no_br: 05078686001 sr_no_br_cl: 05078686001 sr_cl: WERA05078686001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 38 mm Connection size (wrench) 14 x 18 mm Connection type (wrench) Outer rectangle n: WERA 7780 socket spanner 14x18 mm, 38 x 61 mm - 05078686001 cn: INTERCHANGEABLE OPEN-ENDED SPANNER cn2: INTERCHANGEABLE OPEN-ENDED SPANNER cn_clear: INTERCHANGEABLEOPENENDEDSPANNER d: Product description Open end insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7780 Open end insert, 14x18 mm, 14x18 x 38 x 70.5 mm kts: socket spanner 14x18 mm, 38 x 61 mm kpn: 7780 kpn_dash: kpn_clear: 7780 bkpn: WERA 7780 bkpn_clear: WERA 7780 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable open-ended spanner sr_no_br_cl_ns: 05078686001 sr_ns: WERA05078686001
r: 02836052 p: 41.28 pid: 42183 b: WERA q: 0 st: lt: 12 ean: 4013288023766 sr: WERA 05078210001 sr_no_br: 05078210001 sr_no_br_cl: 05078210001 sr_cl: WERA05078210001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/2" Connection profile Outer rectangle n: WERA 7773 C insert tool with square, 9x12 mm, 1/2" x 44 mm - 05078210001 cn: SQUARE DRIVE HEAD cn2: SQUARE DRIVE HEAD cn_clear: SQUAREDRIVEHEAD d: Product description Square drive insert, for 1/2" square socket wrench inserts and 1/2" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. For 1/2" square socket wrench inserts and 1/2" connecting parts with square drive. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7773 C Square drive insert, 9x12 mm, 9x12 x 1/2" x 44 mm kts: insert tool with square, 9x12 mm, 1/2" x 44 mm kpn: 7773 C kpn_dash: kpn_clear: 7773C bkpn: WERA 7773 C bkpn_clear: WERA 7773C c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Square drive head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera square drive head sr_no_br_cl_ns: 05078210001 sr_ns: WERA05078210001
r: 02836050 p: 40.826 pid: 41746 b: WERA q: 0 st: lt: 12 ean: 4013288023759 sr: WERA 05078205001 sr_no_br: 05078205001 sr_no_br_cl: 05078205001 sr_cl: WERA05078205001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 3/8" Connection profile Outer rectangle n: WERA 7773 B insert tool with square, 9x12 mm, 3/8" x 44 mm - 05078205001 cn: SQUARE DRIVE HEAD cn2: SQUARE DRIVE HEAD cn_clear: SQUAREDRIVEHEAD d: Product description Square drive insert, for 3/8" square socket wrench inserts and 3/8" connecting parts with square drive; for torque wrenches of the Click-Torque X series with 9x12 mm holder. Square head insert tool 9x12 mm For torque wrenches from the Click-Torque X series with 9x12 mm mounting For 3/8" square socket wrench inserts and 3/8" connecting parts with square drive With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application For 3/8" square socket wrench inserts and 3/8" connecting parts with square drive Drive 9x12 mm; for torque wrenches of the Click-Torque X and XP series with 9x12 mm holder Design Forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 9x12 mm mounting. For 3/8" square socket wrench inserts and 3/8" connecting parts with square drive. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7773 B Square drive insert, 9x12 mm, 9x12 x 3/8" x 44 mm kts: insert tool with square, 9x12 mm, 3/8" x 44 mm kpn: 7773 B kpn_dash: kpn_clear: 7773B bkpn: WERA 7773 B bkpn_clear: WERA 7773B c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Square drive head | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera square drive head sr_no_br_cl_ns: 05078205001 sr_ns: WERA05078205001
r: 03229882 p: 40.454 pid: 4750 b: WERA q: 0 st: lt: 12 ean: 4013288196293 sr: WERA 05078642001 sr_no_br: 05078642001 sr_no_br_cl: 05078642001 sr_cl: WERA05078642001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 5/16 inch Bit holder type Inner hexagon Connection size (wrench) 9 x 12 mm Connection type (wrench) Outer rectangle n: WERA 7774/3 bit adapter 5/16" insert tool, 14x18 mm, 5/16" x 58 mm - 05078642001 cn: INTERCHAGEABLE BIT HOLDER cn2: INTERCHAGEABLE BIT HOLDER cn_clear: INTERCHAGEABLEBITHOLDER d: Product description Bit adapter insert, 5/16"; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Suitable for 5/16" DIN ISO 1173-E 8 hexagon insert bits and Wera Series 2. With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Suitable for 5/16" DIN ISO 1173-E 8 hexagon insert bits and Wera Series 2 Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. Suitable for 5/16" DIN ISO 1173-E 8 hexagon insert bits and Wera Series 2. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7774/3 Bit adapter insert, 5/16", 14x18 mm, 14x18 x 5/16" x 58.12 mm kts: bit adapter 5/16" insert tool, 14x18 mm, 5/16" x 58 mm kpn: 7774/3 kpn_dash: kpn_clear: 77743 bkpn: WERA 7774/3 bkpn_clear: WERA 77743 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable bit holder sr_no_br_cl_ns: 05078642001 sr_ns: WERA05078642001
r: 03229894 p: 40.454 pid: 4596 b: WERA q: 0 st: lt: 12 ean: 4013288196538 sr: WERA 05078717001 sr_no_br: 05078717001 sr_no_br_cl: 05078717001 sr_cl: WERA05078717001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Type of drive profile Torx Connection size 9 x 12 mm Connection profile Outer rectangle n: WERA 7786 outdoor TORX insertion tool, 14x18 mm, TX 24 x 65 mm - 05078717001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description External TORX® insert; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting For external TORX® screws With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application External TORX® screws Drive 14x18 mm; for torque wrenches of the Click-Torque X and XP series with 14x18 mm holder Design Forged, chrome-vanadium steel, matt chrome-plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. For external TORX® screws. Safe working and rapid tool change thanks to the pin lock of the insert tools. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. ds: dsc: Scope of delivery 7786 External TORX® insert, 14x18 mm, 14x18 x TX 24 x 66 mm kts: outdoor TORX insertion tool, 14x18 mm, TX 24 x 65 mm kpn: 7786 kpn_dash: kpn_clear: 7786 bkpn: WERA 7786 bkpn_clear: WERA 7786 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078717001 sr_ns: WERA05078717001
r: 41071105 p: 38.677 pid: 70654 b: WERA q: 0 st: lt: 9 ean: 4013288093424 sr: WERA 05028045001 sr_no_br: 05028045001 sr_no_br_cl: 05028045001 sr_cl: WERA05028045001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 3 Nm Drive size IP15 Drive type Torx Plus ESD No VDE approved No With safety colour code 1000V Adjustable torque range 3 Nm Max. tightening torque 3 Nm n: WERA 300 IP torque indicator TORX PLUS, 15 IP x 3.0 Nm - 05028045001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX PLUS® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX PLUS® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-3.0 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 IP TORX PLUS® Torque-indicator, 15 IP x 3.0 Nm kts: torque indicator TORX PLUS, 15 IP x 3.0 Nm kpn: 300 IP kpn_dash: kpn_clear: 300IP bkpn: WERA 300 IP bkpn_clear: WERA 300IP c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05028045001 sr_ns: WERA05028045001
r: 03229844 p: 37.851 pid: 69800 b: WERA q: 0 st: lt: 8 ean: 4013288196668 sr: WERA 05078700001 sr_no_br: 05078700001 sr_no_br_cl: 05078700001 sr_cl: WERA05078700001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Ring spanner type Single ring spanner Drive profile size 27 mm Type of drive profile Twelve-point Connection size 14 x 18 mm Connection profile Outer rectangle n: WERA 7781 insert-ring spanner 14x18 mm, 27 x 81 mm - 05078700001 cn: INTERCHANGEABLE RING SPANNER cn2: INTERCHANGEABLE RING SPANNER cn_clear: INTERCHANGEABLERINGSPANNER d: Product description Ring spanner insert, for hexagon screw heads or nuts; for torque wrenches of the Click-Torque X series with 14x18 mm holder. Square head insert tool 14x18 mm For torque wrenches from the Click-Torque X series with 14x18 mm mounting Application: Hexagon screw heads or nuts With safety pin The chrome-vanadium steel version makes the plug-in tools suitable for heavy loads Application Hexagon screw heads or nuts Drive 14x18 mm; for torque wrenches of the Click-Torque X series with 14x18 mm holder Design Forged, chrome vanadium steel, matt chrome plated; with safety pin Features and benefits For torque wrenches from the Click-Torque X series with 14x18 mm mounting. The insert tools are suitable for high loads thanks to their chrome-vanadium steel design. Safe working and rapid tool change thanks to the pin lock of the insert tools. ds: dsc: Scope of delivery 7781 Ring spanner insert, 14x18 mm, 14x18 x 27 x 73.2 mm kts: insert-ring spanner 14x18 mm, 27 x 81 mm kpn: 7781 kpn_dash: kpn_clear: 7781 bkpn: WERA 7781 bkpn_clear: WERA 7781 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Interchangeable ring spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera interchangeable ring spanner sr_no_br_cl_ns: 05078700001 sr_ns: WERA05078700001
