r: 03229725 p: 86.115 pid: 70502 b: WERA q: 0 st: lt: 13 ean: 4013288188236 sr: WERA 05074840010 sr_no_br: 05074840010 sr_no_br_cl: 05074840010 sr_cl: WERA05074840010 sr_dash: sold: 86.115 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver 0.3-1.2 Nm - 05074840010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 ESD x 0.3-1.2 Nm kts: Kraftform torque screwdriver 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840010 sr_ns: WERA05074840010
r: 41071094 p: 28.264 pid: 70459 b: WERA q: 0 st: lt: 13 ean: 4013288093325 sr: WERA 05027930001 sr_no_br: 05027930001 sr_no_br_cl: 05027930001 sr_cl: WERA05027930001 sr_dash: sold: 84.792 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,6 Nm Drive size T6 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,6 Nm Max. tightening torque 0,6 Nm n: WERA 300 TX torque indicator TORX, TX 6 x 0.6 Nm - 05027930001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 6 x 0.6 Nm kts: torque indicator TORX, TX 6 x 0.6 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027930001 sr_ns: WERA05027930001
r: 02836009 p: 75.041 pid: 42077 b: WERA q: 0 st: lt: 11 ean: 4013288179227 sr: WERA 05074824001 sr_no_br: 05074824001 sr_no_br_cl: 05074824001 sr_cl: WERA05074824001 sr_dash: sold: 75.041 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 ESD Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074824001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 ESD x 0.9 Nm x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 ESD kpn_dash: kpn_clear: 7452ESD bkpn: WERA 7452 ESD bkpn_clear: WERA 7452ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074824001 sr_ns: WERA05074824001
r: 41071098 p: 36.198 pid: 71145 b: WERA q: 0 st: lt: 13 ean: 4013288093370 sr: WERA 05027934001 sr_no_br: 05027934001 sr_no_br_cl: 05027934001 sr_cl: WERA05027934001 sr_dash: sold: 72.396 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Drive size T10 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 2 Nm Max. tightening torque 2 Nm n: WERA 300 TX torque indicator TORX, TX 10 x 2.0 Nm - 05027934001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 10 x 2.0 Nm kts: torque indicator TORX, TX 10 x 2.0 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027934001 sr_ns: WERA05027934001
r: 02836014 p: 68.553 pid: 42086 b: WERA q: 0 st: lt: 12 ean: 4013288179098 sr: WERA 05074842001 sr_no_br: 05074842001 sr_no_br_cl: 05074842001 sr_cl: WERA05074842001 sr_dash: sold: 68.553 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 ESD Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm - 05074842001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7461 ESD x 1.2 Nm x 1.2-3.0 Nm kts: Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm kpn: 7461 ESD kpn_dash: kpn_clear: 7461ESD bkpn: WERA 7461 ESD bkpn_clear: WERA 7461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074842001 sr_ns: WERA05074842001
r: 02835961 p: 54.38 pid: 43811 b: WERA q: 0 st: lt: 11 ean: 4013288179197 sr: WERA 05074794001 sr_no_br: 05074794001 sr_no_br_cl: 05074794001 sr_cl: WERA05074794001 sr_dash: sold: 54.38 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074794001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 x 0.9 Nm x 0.9-1.5 Nm kts: Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 kpn_dash: kpn_clear: 7452 bkpn: WERA 7452 bkpn_clear: WERA 7452 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074794001 sr_ns: WERA05074794001
r: 02953168 p: 53.223 pid: 32765 b: WERA q: 0 st: lt: 15 ean: 4013288206398 sr: WERA 05004980001 sr_no_br: 05004980001 sr_no_br_cl: 05004980001 sr_cl: WERA05004980001 sr_dash: sold: 53.223 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 4 mm Drive type External hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 i Hex VDE insulated torque indicator, 4 x 5.0 Nm - 05004980001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera VDE torque indicator with fixed torque for hexagon socket screws. Tamper proof. The robust slip clutch generates a clearly audible and tactile trigger that signals when the set torque is reached, making it impossible to apply any further torque. The loosening torque value is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle perfectly fills the whole hand and fingers comfortably lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transfer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Tamper-proof against accidental changing of set torque value Application Hexagon socket screws Pre-set torque 5.0 Nm, fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Insulated, individually tested as per IEC 60900 Design Hex-Plus, Black Point Handle T-handle, multi-component Features and benefits Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 i VDE Hex Insulated torque-indicator, 4 mm x 5.0 Nm kts: VDE insulated torque indicator, 4 x 5.0 Nm kpn: 400 i Hex kpn_dash: kpn_clear: 400iHex bkpn: WERA 400 i Hex bkpn_clear: WERA 400iHex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05004980001 sr_ns: WERA05004980001
r: 02953170 p: 53.223 pid: 31742 b: WERA q: 0 st: lt: 15 ean: 4013288206114 sr: WERA 05004981001 sr_no_br: 05004981001 sr_no_br_cl: 05004981001 sr_cl: WERA05004981001 sr_dash: sold: 53.223 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 5 mm Drive type External hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 i Hex VDE insulated torque indicator, 5 x 5.0 Nm - 05004981001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera VDE torque indicator with fixed torque for hexagon socket screws. Tamper proof. The robust slip clutch generates a clearly audible and tactile trigger that signals when the set torque is reached, making it impossible to apply any further torque. The loosening torque value is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle perfectly fills the whole hand and fingers comfortably lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transfer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Tamper-proof against accidental changing of set torque value Application Hexagon socket screws Pre-set torque 5.0 Nm, fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Insulated, individually tested as per IEC 60900 Design Hex-Plus, Black Point Handle T-handle, multi-component Features and benefits Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm kts: VDE insulated torque indicator, 5 x 5.0 Nm kpn: 400 i Hex kpn_dash: kpn_clear: 400iHex bkpn: WERA 400 i Hex bkpn_clear: WERA 400iHex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05004981001 sr_ns: WERA05004981001
r: 02835965 p: 48.719 pid: 42130 b: WERA q: 0 st: lt: 12 ean: 4013288103116 sr: WERA 05074722001 sr_no_br: 05074722001 sr_no_br_cl: 05074722001 sr_cl: WERA05074722001 sr_dash: sold: 48.719 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7466 Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. - 05074722001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7466 x 11 in. lbs. kts: Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. kpn: 7466 kpn_dash: kpn_clear: 7466 bkpn: WERA 7466 bkpn_clear: WERA 7466 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074722001 sr_ns: WERA05074722001
r: 41071095 p: 27.107 pid: 71788 b: WERA q: 0 st: lt: 15 ean: 4013288093332 sr: WERA 05027931001 sr_no_br: 05027931001 sr_no_br_cl: 05027931001 sr_cl: WERA05027931001 sr_dash: sold: 27.107 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Drive size T7 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,9 Nm Max. tightening torque 0,9 Nm n: WERA 300 TX torque indicator TORX, TX 7 x 0.9 Nm - 05027931001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 7 x 0.9 Nm kts: torque indicator TORX, TX 7 x 0.9 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027931001 sr_ns: WERA05027931001
r: 03229748 p: 140.454 pid: 70507 b: WERA q: 0 st: lt: 12 ean: 4013288188304 sr: WERA 05074800010 sr_no_br: 05074800010 sr_no_br_cl: 05074800010 sr_cl: WERA05074800010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,02 Nm ESD Yes Max. tightening torque 0,06 Nm With safety colour code 1000V No VDE approved No Adjustable torque range 0,02-0,06 Nm Bit holder type Internal hex Bit holder size 1/4 inch Product Range Wera Kraftform n: WERA 1460 ESD Kraftform Micro adjustable torque screwdriver with quick change holder 0.035 Nm - 05074800010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description With a customised factory pre-set torque value. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque is reached. Repeatability is 100% guaranteed. Unlimited manual loosening torque. Electrical surface resistance<= 10 9 ohms for safe protection against electrostatic charge. Manufactured as per DIN EN 61340-5-1. Handle/interchangeable blades system for rapid blade changes. Kraftform Micro handle with rotating cap and free-turning zone for rapid turning, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones ensures the transmission of high tightening and loosening torques. Precision zone directly above the blade for the correct rotation angle for adjustment work. Rapid bit fixing: Simply push the bit into the holder for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove the bit. Free-running actuating sleeve for easy handling of the tool during the screwdriving process. Bits suitable for manual and machine operated screwdriving connections with electric screwdrivers (including HIOS, Delvo, Sehan). Use with e.g. smartphones, mobile phones, cameras, electronic devices, in dental laboratories and dental surgeries. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for the take-up of bits with 4 mm halfmoon drive and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 10%. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery 1460 ESD Kraftform Micro torque screwdrivers with a customised factory pre-set measurement value with quick-release chuck, 1460 ESD x 0.02-0.06 Nm kts: Kraftform Micro adjustable torque screwdriver with quick change holder 0.035 Nm kpn: 1460 ESD kpn_dash: kpn_clear: 1460ESD bkpn: WERA 1460 ESD bkpn_clear: WERA 1460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074800010 sr_ns: WERA05074800010
r: 02834295 p: 114.834 pid: 41969 b: WERA q: 0 st: lt: 12 ean: 4013288102904 sr: WERA 05074712001 sr_no_br: 05074712001 sr_no_br_cl: 05074712001 sr_cl: WERA05074712001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 25 in lbs Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 25-55 in lbs Max. tightening torque 55 in lbs Product Range Wera Kraftform n: WERA 7447 Kraftform Pistol grip adjustable torque screwdriver with Rapidaptor quick-change holder 25-55 in. lbs. - 05074712001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transfer, multi-component for high working speeds and particularly ergonomic screwdriving. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. ds: dsc: Scope of delivery Series 7400 Kraftform pistol handle, adjustable torque screwdrivers (25.0-55.0 in. lbs.) with Rapidaptor quick-release chuck, 7447 x 25-55 in. lbs. kts: Kraftform Pistol grip adjustable torque screwdriver with Rapidaptor quick-change holder 25-55 in. lbs. kpn: 7447 kpn_dash: kpn_clear: 7447 bkpn: WERA 7447 bkpn_clear: WERA 7447 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074712001 sr_ns: WERA05074712001
r: 02836002 p: 102.644 pid: 42167 b: WERA q: 0 st: lt: 11 ean: 4013288106988 sr: WERA 05074733001 sr_no_br: 05074733001 sr_no_br_cl: 05074733001 sr_cl: WERA05074733001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 in lbs Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 2,5-11,5 in lbs Max. tightening torque 11,5 in lbs Product Range Wera Kraftform n: WERA 7445 ESD Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 2.5-11.5 in. lbs. - 05074733001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (2.5-29.0 in.lbs.) with Rapidaptor quick-release chuck, 7445 ESD x 2.5-11.5 in. lbs. kts: Kraftform ESD adjustable torque screwdriver with Rapidaptor quick-change holder 2.5-11.5 in. lbs. kpn: 7445 ESD kpn_dash: kpn_clear: 7445ESD bkpn: WERA 7445 ESD bkpn_clear: WERA 7445ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074733001 sr_ns: WERA05074733001
r: 03229734 p: 100.785 pid: 71048 b: WERA q: 0 st: lt: 12 ean: 4013288188298 sr: WERA 05074828010 sr_no_br: 05074828010 sr_no_br_cl: 05074828010 sr_cl: WERA05074828010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7456 ESD Kraftform torque screwdriver with quick-change holder 0.3-1.0 Nm - 05074828010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed within the measuring range with the extra tool 05137003001. Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7456 ESD x 0.3-1.0 Nm kts: Kraftform torque screwdriver with quick-change holder 0.3-1.0 Nm kpn: 7456 ESD kpn_dash: kpn_clear: 7456ESD bkpn: WERA 7456 ESD bkpn_clear: WERA 7456ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074828010 sr_ns: WERA05074828010
r: 03229731 p: 100.495 pid: 69763 b: WERA q: 0 st: lt: 12 ean: 4013288188281 sr: WERA 05074826010 sr_no_br: 05074826010 sr_no_br_cl: 05074826010 sr_cl: WERA05074826010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7455 ESD Kraftform torque screwdriver with quick-change holder 0.1-0.34 Nm - 05074826010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed within the measuring range with the extra tool 05137003001. Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Distinct audible and perceivable excess load signal when the pre-set torque value is reached Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7455 ESD x 0.1-0.34 Nm kts: Kraftform torque screwdriver with quick-change holder 0.1-0.34 Nm kpn: 7455 ESD kpn_dash: kpn_clear: 7455ESD bkpn: WERA 7455 ESD bkpn_clear: WERA 7455ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074826010 sr_ns: WERA05074826010
r: 03229722 p: 92.892 pid: 70498 b: WERA q: 0 st: lt: 12 ean: 4013288188205 sr: WERA 05074820010 sr_no_br: 05074820010 sr_no_br_cl: 05074820010 sr_cl: WERA05074820010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 ESD Kraftform torque screwdriver with 89mm handle 0.1-0.34 Nm - 05074820010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7450 ESD x 0.1-0.34 Nm kts: Kraftform torque screwdriver with 89mm handle 0.1-0.34 Nm kpn: 7450 ESD kpn_dash: kpn_clear: 7450ESD bkpn: WERA 7450 ESD bkpn_clear: WERA 7450ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074820010 sr_ns: WERA05074820010
r: 03229640 p: 89.586 pid: 71035 b: WERA q: 0 st: lt: 8 ean: 4013288188199 sr: WERA 05074728010 sr_no_br: 05074728010 sr_no_br_cl: 05074728010 sr_cl: WERA05074728010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4-8,8 Nm Max. tightening torque 8,8 Nm Product Range Wera Kraftform n: WERA 7463 Kraftform torque screwdriver with pistol grip 4.0-8.8 Nm - 05074728010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Unlimited torque for loosening seized screws. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7463 x 4.0-8.8 Nm kts: Kraftform torque screwdriver with pistol grip 4.0-8.8 Nm kpn: 7463 kpn_dash: kpn_clear: 7463 bkpn: WERA 7463 bkpn_clear: WERA 7463 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074728010 sr_ns: WERA05074728010
r: 03229723 p: 87.272 pid: 71799 b: WERA q: 0 st: lt: 12 ean: 4013288188212 sr: WERA 05074822010 sr_no_br: 05074822010 sr_no_br_cl: 05074822010 sr_cl: WERA05074822010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 ESD Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm - 05074822010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7451 ESD x 0.3-1.0 Nm kts: Kraftform torque screwdriver with 89mm handle 0.3-1.0 Nm kpn: 7451 ESD kpn_dash: kpn_clear: 7451ESD bkpn: WERA 7451 ESD bkpn_clear: WERA 7451ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074822010 sr_ns: WERA05074822010
r: 03229728 p: 86.115 pid: 71042 b: WERA q: 0 st: lt: 12 ean: 4013288188243 sr: WERA 05074842010 sr_no_br: 05074842010 sr_no_br_cl: 05074842010 sr_cl: WERA05074842010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 ESD Kraftform torque screwdriver 1.2-3.0 Nm - 05074842010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7461 ESD x 1.2-3.0 Nm kts: Kraftform torque screwdriver 1.2-3.0 Nm kpn: 7461 ESD kpn_dash: kpn_clear: 7461ESD bkpn: WERA 7461 ESD bkpn_clear: WERA 7461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074842010 sr_ns: WERA05074842010
r: 03229724 p: 85.909 pid: 70083 b: WERA q: 0 st: lt: 12 ean: 4013288188229 sr: WERA 05074824010 sr_no_br: 05074824010 sr_no_br_cl: 05074824010 sr_cl: WERA05074824010 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hex ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 ESD Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm - 05074824010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 89 mm, 7452 ESD x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle 0.9-1.5 Nm kpn: 7452 ESD kpn_dash: kpn_clear: 7452ESD bkpn: WERA 7452 ESD bkpn_clear: WERA 7452ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074824010 sr_ns: WERA05074824010
