r: 02830465 p: 9.421 pid: 42735 b: WERA q: 0 st: lt: 15 ean: 4013288181503 sr: WERA 05100004001 sr_no_br: 05100004001 sr_no_br_cl: 05100004001 sr_cl: WERA05100004001 sr_dash: sold: 103.631 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Drive type Slotted Blade length 125 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No n: WERA 160 i SB VDE insulated slotted screwdriver, 1 x 5.5 x 125 mm - 05100004001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdrivers with multi-component Kraftform Plus handle for fast and low-fatigue working: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Individually tested in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The tips of the Wera Lasertip screwdrivers are microscopically roughened by laser beams. This rough surface literally bites into the head of the screw. Any unintentional slipping out is therefore a thing of the past. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i SB VDE Insulated screwdriver for slotted screws, 1 x 5.5 x 125 mm kts: VDE insulated slotted screwdriver, 1 x 5.5 x 125 mm kpn: 160 i SB kpn_dash: kpn_clear: 160iSB bkpn: WERA 160 i SB bkpn_clear: WERA 160iSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100004001 sr_ns: WERA05100004001
r: 02830647 p: 11.239 pid: 43166 b: WERA q: 0 st: lt: 16 ean: 4013288108029 sr: WERA 05007640001 sr_no_br: 05007640001 sr_no_br_cl: 05007640001 sr_cl: WERA05007640001 sr_dash: sold: 101.151 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 8 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm - 05007640001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.6 x 8 x 175 mm kts: saw blade screwdriver, garage blade, 1.6 x 8 x 175 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05007640001 sr_ns: WERA05007640001
r: 03226505 p: 7.15 pid: 71429 b: WERA q: 0 st: lt: 8 ean: 4013288194800 sr: WERA 05118026001 sr_no_br: 05118026001 sr_no_br_cl: 05118026001 sr_cl: WERA05118026001 sr_dash: sold: 100.1 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH0 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 2050 PH Micro Kraftform Phillips screwdriver, PH 0 x 40 mm - 05118026001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for cross-recess Phillips screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2050 PH Screwdriver for Phillips screws for electronic applications, PH 0 x 40 mm kts: Kraftform Phillips screwdriver, PH 0 x 40 mm kpn: 2050 PH Micro kpn_dash: kpn_clear: 2050PHMicro bkpn: WERA 2050 PH Micro bkpn_clear: WERA 2050PHMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118026001 sr_ns: WERA05118026001
r: 02832435 p: 19.504 pid: 42914 b: WERA q: 0 st: lt: 12 ean: 4013288017765 sr: WERA 05017020001 sr_no_br: 05017020001 sr_no_br_cl: 05017020001 sr_cl: WERA05017020001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Drive size PH4 Blade length 200 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 4 x 200 mm - 05017020001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Single-component, ergonomic Kraftform handle Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 4 x 200 mm kts: Phillips screwdriver, PH 4 x 200 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017020001 sr_ns: WERA05017020001
r: 02280988 p: 9.752 pid: 45766 b: WERA q: 0 st: lt: 12 ean: 4013288160164 sr: WERA 05006451001 sr_no_br: 05006451001 sr_no_br_cl: 05006451001 sr_cl: WERA05006451001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Drive size PH2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Phillips n: WERA 162 iS PH VDE insulated Phillips screwdriver, reduced-diameter blade, PH 2 x 100 mm - 05006451001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter, so that even sunken screws can be easily reached. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced shaft diameter Application Phillips screws Blade Reduced blade diameter with integrated protective insulation, allows sunken PH screws to be accessed and actuated, individually tested as per IEC 60900 Design Blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 162 iS PH VDE Insulated screwdriver with reduced blade diameter for Phillips screws, PH 2 x 100 mm kts: VDE insulated Phillips screwdriver, reduced-diameter blade, PH 2 x 100 mm kpn: 162 iS PH kpn_dash: kpn_clear: 162iSPH bkpn: WERA 162 iS PH bkpn_clear: WERA 162iSPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006451001 sr_ns: WERA05006451001
r: 41070256 p: 9.752 pid: 70528 b: WERA q: 6 st: 1 lt: 1 ean: 4013288003089 sr: WERA 05110010001 sr_no_br: 05110010001 sr_no_br_cl: 05110010001 sr_cl: WERA05110010001 sr_dash: sold: 97.52 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 6,5 mm Blade length 150 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 334 saw blade screwdriver, garage blade, 1.2 x 6.5 x 150 mm - 05110010001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver - workshop blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 334 Screwdriver for slotted screws, 1.2 x 6.5 x 150 mm kts: saw blade screwdriver, garage blade, 1.2 x 6.5 x 150 mm kpn: 334 kpn_dash: kpn_clear: 334 bkpn: WERA 334 bkpn_clear: WERA 334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110010001 sr_ns: WERA05110010001
r: 02690004 p: 13.884 pid: 44777 b: WERA q: 1 st: 1 lt: 1 ean: 4013288017758 sr: WERA 05017015001 sr_no_br: 05017015001 sr_no_br_cl: 05017015001 sr_cl: WERA05017015001 sr_dash: sold: 97.188 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 917 SPH Phillips screwdriver, PH 3 x 150 mm - 05017015001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Phillips screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 917 SPH Screwdriver for Phillips screws, PH 3 x 150 mm kts: Phillips screwdriver, PH 3 x 150 mm kpn: 917 SPH kpn_dash: kpn_clear: 917SPH bkpn: WERA 917 SPH bkpn_clear: WERA 917SPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017015001 sr_ns: WERA05017015001
r: 41071245 p: 19.338 pid: 70487 b: WERA q: 0 st: lt: 12 ean: 4013288107381 sr: WERA 05032007001 sr_no_br: 05032007001 sr_no_br_cl: 05032007001 sr_cl: WERA05032007001 sr_dash: sold: 96.69 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 9 mm Blade length 200 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 3334 cutting screwdriver, stainless steel, 1.6 x 10 x 200 mm - 05032007001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Slotted screwdriver - workshop blade Stainless screwdriver for slotted screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Application Slotted screws Blade Round Design Lasertip, stainless steel for minimising rust, Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 3334 Screwdriver for slotted screws, stainless, 1.6 x 10 x 200 mm kts: cutting screwdriver, stainless steel, 1.6 x 10 x 200 mm kpn: 3334 kpn_dash: kpn_clear: 3334 bkpn: WERA 3334 bkpn_clear: WERA 3334 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032007001 sr_ns: WERA05032007001
r: 02835682 p: 10.63 pid: 43727 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108661 sr: WERA 05118184001 sr_no_br: 05118184001 sr_no_br_cl: 05118184001 sr_cl: WERA05118184001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T8 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 8 x 60 mm - 05118184001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 8 x 60 mm kts: Kraftform screwdriver with holding function, TX 8 x 60 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118184001 sr_ns: WERA05118184001
r: 02835680 p: 10.63 pid: 43715 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108647 sr: WERA 05118182001 sr_no_br: 05118182001 sr_no_br_cl: 05118182001 sr_cl: WERA05118182001 sr_dash: sold: 95.67 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T6 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 2067 TORX HF Kraftform screwdriver with holding function, TX 6 x 40 mm - 05118182001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. With practical holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro TORX® HF screwdriver with holding function for recessed TORX® screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Holding function for TORX® screws, chrome-plated Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 TORX® HF Screwdriver with holding function for electronic applications, TX 6 x 40 mm kts: Kraftform screwdriver with holding function, TX 6 x 40 mm kpn: 2067 TORX HF kpn_dash: kpn_clear: 2067TORXHF bkpn: WERA 2067 TORX HF bkpn_clear: WERA 2067TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118182001 sr_ns: WERA05118182001
r: 02835149 p: 10.6 pid: 41612 b: WERA q: 0 st: lt: 12 ean: 4013288039132 sr: WERA 05030112001 sr_no_br: 05030112001 sr_no_br_cl: 05030112001 sr_cl: WERA05030112001 sr_dash: sold: 95.4 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 80 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 1550 PH ESD Micro Kraftform Phillips screwdriver, PH 1 x 80 mm - 05030112001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for cross-recess screws, Phillips ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Multi-component screwdriver handle for ergonomic working. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1550 PH ESD Kraftform Micro screwdriver for Phillips screws, PH 1 x 80 mm kts: Kraftform Phillips screwdriver, PH 1 x 80 mm kpn: 1550 PH ESD Micro kpn_dash: kpn_clear: 1550PHESDMicro bkpn: WERA 1550 PH ESD Micro bkpn_clear: WERA 1550PHESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030112001 sr_ns: WERA05030112001
r: 02468269 p: 8.595 pid: 44076 b: WERA q: 1 st: 1 lt: 1 ean: 4013288108333 sr: WERA 05029464001 sr_no_br: 05029464001 sr_no_br_cl: 05029464001 sr_cl: WERA05029464001 sr_dash: sold: 94.545 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 195 mm Blade length 90 mm VDE approved No n: WERA 395 cap screwdriver hollow shank 8.0 x 90 mm - 05029464001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera insert wrench screwdriver with hollow shaft for screwdriving on thread rods, because only then can the thread rod penetrate through the bolt into the hollow shaft of the screwdriver. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With hexagon anti-roll protection against rolling away. Handles marked for easy identification and sorting of tools. For external hexagon screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Hollow shaft for protruding threaded rods, chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Hollow shaft for protruding threaded rods, chrome-plated Handle Kraftform with non-roll feature, multi-component TIP The hollow shaft enables seized screws or those on long threads to be tightened and loosened Features and benefits Hollow shaft for protruding threaded rods A screwdriver with a hollow shaft is needed whenever there are screwdriving jobs involving threaded rods i.e. the threaded rod can slip into the hollow shaft of the nutsetter. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 HO Nutdriver, 8 x 90 mm kts: cap screwdriver hollow shank 8.0 x 90 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029464001 sr_ns: WERA05029464001
r: 02094534 p: 10.41 pid: 42153 b: WERA q: 0 st: lt: 19 ean: 4013288032072 sr: WERA 05118060001 sr_no_br: 05118060001 sr_no_br_cl: 05118060001 sr_cl: WERA05118060001 sr_dash: sold: 93.69 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 0,7 mm Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Hexagon Product Range Wera Kraftform n: WERA 2054 Micro Kraftform hexagonal screwdriver, 0.7 x 40 mm - 05118060001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for hexagon socket screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving The Wera Black Point tip offers an exact fit and optimum corrosion protection Hex-Plus allows socket head screws to live longer Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hex-Plus, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2054 Screwdriver for hexagon socket screws for electronic applications, 0.7 x 40 mm kts: Kraftform hexagonal screwdriver, 0.7 x 40 mm kpn: 2054 Micro kpn_dash: kpn_clear: 2054Micro bkpn: WERA 2054 Micro bkpn_clear: WERA 2054Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118060001 sr_ns: WERA05118060001
r: 02750338 p: 11.528 pid: 45973 b: WERA q: 0 st: lt: 12 ean: 4013288160225 sr: WERA 05006456001 sr_no_br: 05006456001 sr_no_br_cl: 05006456001 sr_cl: WERA05006456001 sr_dash: sold: 92.224 p_range: none type: standard act: 1 avo: 1 av: Drive size PH/S 2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Phillips/Slotted n: WERA 162 iS PH/S VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm - 05006456001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Reduced blade diameter with integrated insulation protection so that even low-lying screw and spring elements can be accessed and actuated. Combination profile - slotted and Phillips particularly for jobs on terminal blocks, fuse boxes, switches and relays. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The anti-roll feature prevents any bothersome rolling away at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Reduced shaft diameter; combination profile Phillips/slotted Application PlusMinus screws (Phillips/slotted) Blade Reduced blade diameter with integrated protective insulation, allows sunken PlusMinus screws to be accessed and actuated, individually tested as per IEC 60900 Design Combination profile Phillips/slotted, blade zinc-phosphated Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 162 iS PH/S VDE Insulated screwdriver with reduced blade diameter for PlusMinus screws (Phillips/slotted), # 2 x 100 mm kts: VDE insulated screwdriver for PlusMinus screws, reduced-diameter blade, square 2 x 100 mm kpn: 162 iS PH/S kpn_dash: kpn_clear: 162iSPHS bkpn: WERA 162 iS PH/S bkpn_clear: WERA 162iSPHS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006456001 sr_ns: WERA05006456001
r: 02832472 p: 22.975 pid: 42490 b: WERA q: 0 st: lt: 12 ean: 4013288017802 sr: WERA 05017056001 sr_no_br: 05017056001 sr_no_br_cl: 05017056001 sr_cl: WERA05017056001 sr_dash: sold: 91.9 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ4 Blade length 200 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Pozidriv n: WERA 918 SPZ Pozidriv screwdriver, PZ 4 x 200 mm - 05017056001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera Chiseldriver for fastening, chiselling and loosening seized screws. Single-component Kraftfrom handle for fast and low-fatigue working. A hexagon blade out of high quality bit material that extends right through the blade ensures full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Comes with an impact cap for durability and reduced risk of splintering. More torque can be transferred with the help of an open-end or ring spanner applied to the integrated hexagonal bolster. The Wera Black Point tip and a complex hardening process ensure a long service life of the tip, enhanced corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Single-component, ergonomic Kraftform handle Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 918 SPZ Screwdriver for Pozidriv screws, PZ 4 x 200 mm kts: Pozidriv screwdriver, PZ 4 x 200 mm kpn: 918 SPZ kpn_dash: kpn_clear: 918SPZ bkpn: WERA 918 SPZ bkpn_clear: WERA 918SPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05017056001 sr_ns: WERA05017056001
r: 41989094 p: 10.12 pid: 70673 b: WERA q: 0 st: lt: 11 ean: 4013288028761 sr: WERA 05117684001 sr_no_br: 05117684001 sr_no_br_cl: 05117684001 sr_cl: WERA05117684001 sr_dash: sold: 91.08 p_range: none type: standard act: 1 avo: 1 av: Drive size #2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 screwdriver for internal square screws, square 2 x 100 mm - 05117684001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver for square socket screws. The colour coding system allows the user to quickly find and identify the size needed. Multi-component Kraftform handle for fast and low-fatigue working. The Wera Black Point tip offers optimised corrosion protection and an exact fit. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Handle markings for simplified finding and sorting of the tool. Screwdriver for square socket screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Square socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, # 2/300: single-component Features and benefits The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The hexagonal non-roll feature prevents any rolling away at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 368 Screwdriver for square socket head screws, # 2 x 100 mm kts: screwdriver for internal square screws, square 2 x 100 mm kpn: 368 kpn_dash: kpn_clear: 368 bkpn: WERA 368 bkpn_clear: WERA 368 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05117684001 sr_ns: WERA05117684001
r: 02832527 p: 10.082 pid: 43289 b: WERA q: 0 st: lt: 16 ean: 4013288181602 sr: WERA 05100086001 sr_no_br: 05100086001 sr_no_br_cl: 05100086001 sr_cl: WERA05100086001 sr_dash: sold: 90.738 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 7 mm Drive type Slotted Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 932 A SB cutting screwdriver, 1.2 x 7 x 125 mm - 05100086001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Smooth hard zones for high speed turning, soft grip zones for high torque transfer Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal blade extending through the handle, impact cap with integrated square and bolster The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A SB Screwdriver for slotted screws, 1.2 x 7 x 125 mm kts: cutting screwdriver, 1.2 x 7 x 125 mm kpn: 932 A SB kpn_dash: kpn_clear: 932ASB bkpn: WERA 932 A SB bkpn_clear: WERA 932ASB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100086001 sr_ns: WERA05100086001
r: 02835737 p: 8.223 pid: 42110 b: WERA q: 0 st: lt: 12 ean: 4013288178749 sr: WERA 05030160001 sr_no_br: 05030160001 sr_no_br_cl: 05030160001 sr_cl: WERA05030160001 sr_dash: sold: 90.453 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size IPR1 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Plus Tamper Resistant Product Range Wera Kraftform n: WERA 2067 TORX PLUS IPR Micro Kraftform screwdriver, 1 IPR x 40 mm - 05030160001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for recessed IPR TORX PLUS® screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application TORX PLUS® IPR socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (purple= TORX PLUS® IPR) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2067 IPR TORX PLUS® Screwdriver for electronic applications, 1 IPR x 40 mm kts: Kraftform screwdriver, 1 IPR x 40 mm kpn: 2067 TORX PLUS IPR Micro kpn_dash: kpn_clear: 2067TORXPLUSIPRMicro bkpn: WERA 2067 TORX PLUS IPR Micro bkpn_clear: WERA 2067TORXPLUSIPRMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030160001 sr_ns: WERA05030160001
r: 02835475 p: 8.84 pid: 42080 b: WERA q: 0 st: lt: 12 ean: 4013288108562 sr: WERA 05118019001 sr_no_br: 05118019001 sr_no_br_cl: 05118019001 sr_cl: WERA05118019001 sr_dash: sold: 88.4 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size PH00 Blade length 40 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wera Kraftform n: WERA 2050 PH Micro Kraftform Phillips screwdriver, PH 00 x 40 mm - 05118019001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for cross-recess Phillips screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Phillips screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2050 PH Screwdriver for Phillips screws for electronic applications, PH 00 x 40 mm kts: Kraftform Phillips screwdriver, PH 00 x 40 mm kpn: 2050 PH Micro kpn_dash: kpn_clear: 2050PHMicro bkpn: WERA 2050 PH Micro bkpn_clear: WERA 2050PHMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118019001 sr_ns: WERA05118019001
r: 02830462 p: 7.272 pid: 42730 b: WERA q: 0 st: lt: 9 ean: 4013288181480 sr: WERA 05100002001 sr_no_br: 05100002001 sr_no_br_cl: 05100002001 sr_cl: WERA05100002001 sr_dash: sold: 87.264 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Drive type Slotted Blade length 100 mm Blade thickness 0,6 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No n: WERA 160 i SB VDE insulated slotted screwdriver, 0.6 x 3.5 x 100 mm - 05100002001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter, so that even sunken screws can be easily reached. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. the hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i SB VDE Insulated screwdriver for slotted screws, 0.6 x 3.5 x 100 mm kts: VDE insulated slotted screwdriver, 0.6 x 3.5 x 100 mm kpn: 160 i SB kpn_dash: kpn_clear: 160iSB bkpn: WERA 160 i SB bkpn_clear: WERA 160iSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100002001 sr_ns: WERA05100002001
