r: 41070365 p: 9.752 pid: 71738 b: WERA q: 14 st: 1 lt: 1 ean: 4013288004802 sr: WERA 05029410001 sr_no_br: 05029410001 sr_no_br_cl: 05029410001 sr_cl: WERA05029410001 sr_dash: sold: 526.608 p_range: none type: standard act: 1 avo: 1 av: Width across flats 7 mm With safety colour code 1000V ESD No Handle type Screwdriver handle Overall length 230 mm Blade length 125 mm VDE approved No n: WERA 395 cap screwdriver 7.0 x 125 mm - 05029410001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description High quality nutsetter by Wera. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hexagonal anti-roll feature prevents any rolling away and handle markings make for simplified finding and sorting of the tool; for hexagon head screws. Nutsetter for hexagon head screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Chrome-plated Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated, nutdriver for hexagon head bolts Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 395 Nutdriver, 7 x 125 mm kts: cap screwdriver 7.0 x 125 mm kpn: 395 kpn_dash: kpn_clear: 395 bkpn: WERA 395 bkpn_clear: WERA 395 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver sr_no_br_cl_ns: 05029410001 sr_ns: WERA05029410001
r: 41070396 p: 8.925 pid: 72443 b: WERA q: 4 st: 1 lt: 1 ean: 4013288018038 sr: WERA 05018266001 sr_no_br: 05018266001 sr_no_br_cl: 05018266001 sr_cl: WERA05018266001 sr_dash: sold: 526.575 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 7 mm Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A cutting screwdriver, 1.2 x 7 x 125 mm - 05018266001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 1.2 x 7 x 125 mm kts: cutting screwdriver, 1.2 x 7 x 125 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018266001 sr_ns: WERA05018266001
r: 02102798 p: 11.59 pid: 44421 b: WERA q: 0 st: lt: 11 ean: 4013288102607 sr: WERA 05059897001 sr_no_br: 05059897001 sr_no_br_cl: 05059897001 sr_cl: WERA05059897001 sr_dash: sold: 521.55 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 1/4" VDE approved No Bit tip SL/PZ2 n: WERA 855/4 PZ/S bit, 2 x 70 mm - 05059897001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with combination profile slotted and Pozidriv*, particularly for jobs on terminal blocks, fuse boxes, switches and relays. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. For PlusMinus screws (combination profile Pozidriv/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 4) Application PlusMinus (Pozidriv/slotted) screws Drive 1/4" hexagon suitable for DIN ISO 1173-F 6.3 bit holders Design PlusMinus (Pozidriv/slotted), tough, ideal for electrical component adjustment jobs e.g. in sheet steel or metal Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 PZ/S PlusMinus bits, # 2 x 70 mm kts: bit, # 2 x 70 mm kpn: 855/4 PZ/S kpn_dash: kpn_clear: 8554PZS bkpn: WERA 855/4 PZ/S bkpn_clear: WERA 8554PZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059897001 sr_ns: WERA05059897001
r: 08085453 p: 86.611 pid: 70919 b: WERA q: 0 st: lt: 8 ean: 4013288222930 sr: WERA 05057473001 sr_no_br: 05057473001 sr_no_br_cl: 05057473001 sr_cl: WERA05057473001 sr_dash: sold: 519.666 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 400 RA Set Imperial 1 T-handle bit holder with 17-piece bit set - 05057473001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 17-piece set in a robust textile box. One 416 RA T-handle bitholding screwdriver with ratchet functionality and Rapidaptor quick-release chuck for 1/4" bits. The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. Bit holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3. With Rapidaptor technology for lightning-fast bit changes. 16 tough bits, 1/4", 89 mm long, for universal use. The integrated ratchet with fine toothing ensures fast and safe working Convenient working thanks to the ratchet mechanism fully embedded in the handle Reversing lever for comfortable clockwise/counterclockwise direction change Rapidaptor bitholding screwdriver with fast-rotating sleeve for lightning-fast bit changes and high working speeds Fast-rotating sleeve for extremely high working speed 17-piece setTextile box with one 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck, 16 tough bits, 1/4", 89 mm length Features and benefits The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The integrated ratchet with fine toothing (80 teeth) and a return angle of 4.5° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism of the 416 RA T-handle bitholding screwdriver is completely embedded in the handle. The compact shape of the tool allows convenient working. The change of direction can easily be made using the reversing lever. The fast-rotating sleeve allows the tool to be guided safely while screwdriving and increases the working speed. The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 400 RA Imperial Set 1, 17 pieces 1x 416 RA T-handle bitholding screwdriver with ratchet function and Rapidaptor quick-release chuck: 1/4" x 45 mm 2x 851/4 Z bits: PH 2x89 mm, PH 3x89 mm 6x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm, TX 40x89 mm 5x 840/4 Z bits: 1/8"x89 mm, 5/32"x89 mm, 3/16"x89 mm, 7/32"x89 mm, 1/4"x89 mm 2x 868/4 Square-Plus bits: # 2x89 mm, # 3x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: T-handle bit holder with 17-piece bit set kpn: Kraftform Kompakt 400 RA Set Imperial 1 kpn_dash: kpn_clear: KraftformKompakt400RASetImperial1 bkpn: WERA Kraftform Kompakt 400 RA Set Imperial 1 bkpn_clear: WERA KraftformKompakt400RASetImperial1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057473001 sr_ns: WERA05057473001
r: 03228614 p: 103.801 pid: 70023 b: WERA q: 0 st: lt: 12 ean: 4013288214621 sr: WERA 05057483001 sr_no_br: 05057483001 sr_no_br_cl: 05057483001 sr_cl: WERA05057483001 sr_dash: sold: 519.005 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Turbo Imperial 1 screwdriver handle with interchangeable blades in folding case 19-piece - 05057483001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many users would like to be able to carry out screwdriving processes faster without compromise. With a screwdriver that is precise, allows powerful screwdriving, and is much faster than a conventional screwdriver. A part-time universal gear is the solution: Integrated in the screwdriver handle, it quadruples the working speed with smooth couplings - purely mechanically. One hand holds the front part of the handle, the other hand turns the rear part of the handle. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood, as well as for fine adjustments. Robust, maintenance-free gear made of steel with a maximum torque of 14Nm when the turbo function is deactivated. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward. 4 times the screwdriving speed thanks to the turbo function (purely mechanical - without battery) Activate and deactivate the turbo function by a simple push of a button Turbo function especially for smooth couplings Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque, e.g. for screw connections in wood Robust, maintenance-free gear made of steel Folding pouch with 89 mm long bits19-piece set1 bitholding Kraftform Turbo with Rapidaptor quick-release chuck Features and benefits The construction of the Kraftform Turbo allows the speed of manual screwdriving to be quadrupled, especially for smooth couplings - without electricity! The turbo function can be activated as needed by pressing a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood as well as for fine adjustments. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. ds: dsc: Scope of delivery Kraftform Kompakt Turbo Imperial 1, 19 pieces 1x 826 T Kraftform Turbo bitholding handle with Rapidaptor quick-release chuck: 1/4" x 146 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 5x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 4x 840/4 Z bits: 3/32"x89 mm, 1/8"x89 mm, 5/32"x89 mm, 3/16"x89 mm 3x 868/4 Square-Plus bits: # 1x89 mm, # 2x89 mm, # 3x89 mm 3x 800/4 Z bits: 1x5.5x89 mm, 0.8x4x89 mm, 1.2x6.5x89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: screwdriver handle with interchangeable blades in folding case 19-piece kpn: Kraftform Kompakt Turbo Imperial 1 kpn_dash: kpn_clear: KraftformKompaktTurboImperial1 bkpn: WERA Kraftform Kompakt Turbo Imperial 1 bkpn_clear: WERA KraftformKompaktTurboImperial1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057483001 sr_ns: WERA05057483001
r: 87010210 p: 11.735 pid: 75105 b: WERA q: 17 st: 1 lt: 1 ean: 4013288035158 sr: WERA 05053872001 sr_no_br: 05053872001 sr_no_br_cl: 05053872001 sr_cl: WERA05053872001 sr_dash: sold: 516.34 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 52 mm n: WERA 895/4/1 K universal bit holder, 1/4" x 52 mm - 05053872001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. With quick-release chuck for quick bit changes. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive With quick-release chuck and strong permanent magnet Short design 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With strong permanent magnet and quick-release chuck Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The magnetic design enables simplified positioning of the screw. ds: dsc: Scope of delivery 895/4/1 K Universal Bit Holder, 1/4" x 52 mm kts: universal bit holder, 1/4" x 52 mm kpn: 895/4/1 K kpn_dash: kpn_clear: 89541K bkpn: WERA 895/4/1 K bkpn_clear: WERA 89541K c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053872001 sr_ns: WERA05053872001
r: 02247753 p: 9.276 pid: 44215 b: WERA q: 0 st: lt: 10 ean: 4013288157577 sr: WERA 05057644001 sr_no_br: 05057644001 sr_no_br_cl: 05057644001 sr_cl: WERA05057644001 sr_dash: sold: 510.18 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 4 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 4 mm Product Range Wera Hex-Plus n: WERA 840/4 IMP DC Hex-Plus DIY bit, 4 x 50 mm - 05057644001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality Impaktor bits for hexagonal socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Hex-Plus ensures a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (blue = hexagon) and large stamp to enable the desired bit to be easily located. Features and benefits Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 1x 840/4 IMP DC Impaktor Hex Bits: 4 x 50 mm kts: bit, 4 x 50 mm kpn: 840/4 IMP DC Hex-Plus DIY kpn_dash: 840/4 IMP DC Hex kpn_clear: 8404IMPDCHexPlusDIY bkpn: WERA 840/4 IMP DC Hex-Plus DIY bkpn_clear: WERA 8404IMPDCHexPlusDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05057644001 sr_ns: WERA05057644001
r: 87010226 p: 7.83 pid: 71531 b: WERA q: 8 st: 1 lt: 1 ean: 4013288034137 sr: WERA 05059902001 sr_no_br: 05059902001 sr_no_br_cl: 05059902001 sr_cl: WERA05059902001 sr_dash: sold: 508.95 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/4 BDC PZ bit Pozidriv, PZ 2 x 50 mm - 05059902001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. ds: dsc: Scope of delivery 855/4 BDC bits, PZ 2 x 50 mm kts: bit Pozidriv, PZ 2 x 50 mm kpn: 855/4 BDC PZ kpn_dash: kpn_clear: 8554BDCPZ bkpn: WERA 855/4 BDC PZ bkpn_clear: WERA 8554BDCPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059902001 sr_ns: WERA05059902001
r: 03166844 p: 21.157 pid: 31370 b: WERA q: 1 st: 1 lt: 1 ean: 4013288212351 sr: WERA 05008876001 sr_no_br: 05008876001 sr_no_br_cl: 05008876001 sr_cl: WERA05008876001 sr_dash: sold: 507.768 p_range: none type: standard act: 1 avo: 1 av: Drive type Torx VDE approved No With safety colour code 1000V No Quantity per set 5 n: WERA Stubby Set TX 1 screwdriver set Torx 5-piece - 05008876001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description Especially small screwdrivers with short blades for hard to reach areas. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise working. The blades have all the benefits of the Wera Bit technology. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away Take it easy tool finder: colour coding according to profile and size With Take it easy tool finder: colour coding according to profile and size stamp. Application TORX® screws Design 5-piece set in display carton Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Stubby Set TX 1 Screwdriver set TORX®, 5 pieces 5x 367 TORX® Stubby screwdriver: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm, TX 30x25 mm kts: screwdriver set Torx 5-piece kpn: Stubby Set TX 1 kpn_dash: kpn_clear: StubbySetTX1 bkpn: WERA Stubby Set TX 1 bkpn_clear: WERA StubbySetTX1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05008876001 sr_ns: WERA05008876001
r: 41070398 p: 15.867 pid: 72454 b: WERA q: 13 st: 1 lt: 1 ean: 4013288018052 sr: WERA 05018270001 sr_no_br: 05018270001 sr_no_br_cl: 05018270001 sr_cl: WERA05018270001 sr_dash: sold: 507.744 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 10 mm Blade length 175 mm Blade thickness 1,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 932 A saw-cut screwdriver, 1.6 x 10 x 175 mm - 05018270001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Slotted screws Blade Hexagonal throughout with impact cap, hexagonal bolster from 0.8 x 4.5 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes 2.0 x 12.0, 2.5 x 14.0: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 932 A Screwdriver for slotted screws, 1.6 x 10 x 175 mm kts: saw-cut screwdriver, 1.6 x 10 x 175 mm kpn: 932 A kpn_dash: kpn_clear: 932A bkpn: WERA 932 A bkpn_clear: WERA 932A c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05018270001 sr_ns: WERA05018270001
r: 41070215 p: 9.752 pid: 71046 b: WERA q: 16 st: 1 lt: 1 ean: 4013288027276 sr: WERA 05006125001 sr_no_br: 05006125001 sr_no_br_cl: 05006125001 sr_cl: WERA05006125001 sr_dash: sold: 507.104 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 6,5 mm Blade length 150 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 i VDE insulated slotted screwdriver, 1.2 x 6.5 x 150 mm - 05006125001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade, Lasertip Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i VDE Insulated screwdriver for slotted screws, 1.2 x 6.5 x 150 mm kts: insulated slotted screwdriver, 1.2 x 6.5 x 150 mm kpn: 160 i VDE kpn_dash: kpn_clear: 160iVDE bkpn: WERA 160 i VDE bkpn_clear: WERA 160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006125001 sr_ns: WERA05006125001
r: 41070213 p: 6.57 pid: 72312 b: WERA q: 81 st: 1 lt: 1 ean: 4013288027252 sr: WERA 05006115001 sr_no_br: 05006115001 sr_no_br_cl: 05006115001 sr_cl: WERA05006115001 sr_dash: sold: 505.89 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 100 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 i VDE insulated slotted screwdriver, 0.8 x 4 x 100 mm - 05006115001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade, Lasertip Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical tip, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i VDE Insulated screwdriver for slotted screws, 0.8 x 4 x 100 mm kts: insulated slotted screwdriver, 0.8 x 4 x 100 mm kpn: 160 i VDE kpn_dash: kpn_clear: 160iVDE bkpn: WERA 160 i VDE bkpn_clear: WERA 160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006115001 sr_ns: WERA05006115001
r: 03226449 p: 26.611 pid: 71409 b: WERA q: 0 st: lt: 8 ean: 4013288120991 sr: WERA 05347735002 sr_no_br: 05347735002 sr_no_br_cl: 05347735002 sr_cl: WERA05347735002 sr_dash: sold: 505.609 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 3 Product Range Wera Kraftform n: WERA 335/350/355/3 screwdriver set Kraftform Plus with 300 mm long blades 3-piece - 05347735002 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 3-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Take it easy Tool Finder with colour coding according to sizes. Screwdrivers for slotted and cross-recess Phillips and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Extra-long blade for low-lying working situations. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips and Pozidriv screws Content 3-piece set Features and benefits Extra-long blade for low-lying working situations. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 335/350/355/3 Screwdriver set Kraftform Plus 300 mm-long blades, 3 pieces 1x 335 Screwdriver for slotted screws: 1 x 5.5 x 300 mm 1x 350 PH Screwdriver for Phillips screws: PH 2 x 300 mm 1x 355 PZ Screwdriver for Pozidriv screws: PZ 2 x 300 mm kts: screwdriver set Kraftform Plus with 300 mm long blades 3-piece kpn: 335/350/355/3 kpn_dash: kpn_clear: 3353503553 bkpn: WERA 335/350/355/3 bkpn_clear: WERA 3353503553 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05347735002 sr_ns: WERA05347735002
r: 02818404 p: 27.933 pid: 44494 b: WERA q: 0 st: lt: 12 ean: 4013288138477 sr: WERA 05072441001 sr_no_br: 05072441001 sr_no_br_cl: 05072441001 sr_cl: WERA05072441001 sr_dash: sold: 502.794 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 Number per blister 100 n: WERA 851/1 Z DIY 100 SiS bits Phillips, PH 2 x 25 mm (100 pcs) - 05072441001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z DIY 100 bits, PH 2 x 25 mm, 100 pieces 100x 851/1 Z bits: PH 2 x 25 mm kts: bits Phillips, PH 2 x 25 mm (100 pcs) kpn: 851/1 Z DIY 100 SiS kpn_dash: kpn_clear: 8511ZDIY100SiS bkpn: WERA 851/1 Z DIY 100 SiS bkpn_clear: WERA 8511ZDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072441001 sr_ns: WERA05072441001
r: 41071249 p: 14.71 pid: 70490 b: WERA q: 0 st: lt: 8 ean: 4013288107428 sr: WERA 05032023001 sr_no_br: 05032023001 sr_no_br_cl: 05032023001 sr_cl: WERA05032023001 sr_dash: sold: 500.14 p_range: none type: standard act: 1 avo: 1 av: Drive size PH3 Blade length 150 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips n: WERA 3350 PH Phillips screwdriver, stainless steel, PH 3 x 150 mm - 05032023001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver out of stainless steel. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Stainless screwdriver for cross-recess screws, Phillips Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tip, stainless to prevent extraneous rust Application Phillips screws Blade Round Design Stainless steel for minimising rust, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (red = Phillips) and size stamp. Features and benefits Screw stainless steel together with stainless steel! Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 3350 PH Screwdriver for Phillips screws, stainless, PH 3 x 150 mm kts: Phillips screwdriver, stainless steel, PH 3 x 150 mm kpn: 3350 PH kpn_dash: kpn_clear: 3350PH bkpn: WERA 3350 PH bkpn_clear: WERA 3350PH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05032023001 sr_ns: WERA05032023001
r: 02814994 p: 41.157 pid: 17212 b: WERA q: 0 st: lt: 8 ean: 4013288179821 sr: WERA 05057430001 sr_no_br: 05057430001 sr_no_br_cl: 05057430001 sr_cl: WERA05057430001 sr_dash: sold: 493.884 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 BiTorsion 1 screwdriver bit set, 30-piece - 05057430001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Tough-absorbing bits for universal use. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. BiTorsion bits for long service life Quick-release chuck with Rapidaptor technology Take it easy tool finder: colour coding according to profile and size The Bit-Checks by Wera are extremely compact and are therefore the ideal companion for mobile applications. Upright positionable Bit-Checks convince due to their functionality in a minimum of space 1 bit holder Rapidaptor with quick-release chuck, 29 BiTorsion bits for long service life, tough, for universal use. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases product life. Tough design for universal use. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Bitholders, magnetic, for easier application of the screw ds: dsc: Scope of delivery Bit-Check 30 BiTorsion 1, 30 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 9x 851/1 BTZ bits: 2x PH 1x25 mm, 5x PH 2x25 mm, 2x PH 3x25 mm 10x 855/1 BTZ bits: 2x PZ 1x25 mm, 6x PZ 2x25 mm, 2x PZ 3x25 mm 10x 867/1 BTZ TORX® bits: TX 10x25 mm, 2x TX 15x25 mm, 2x TX 20x25 mm, 2x TX 25x25 mm, 2x TX 30x25 mm, TX 40x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 BiTorsion 1 kpn_dash: Bit kpn_clear: BitCheck30BiTorsion1 bkpn: WERA Bit-Check 30 BiTorsion 1 bkpn_clear: WERA BitCheck30BiTorsion1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057430001 sr_ns: WERA05057430001
r: 02951222 p: 60.991 pid: 31706 b: WERA q: 0 st: lt: 12 ean: 4013288187833 sr: WERA 05004313001 sr_no_br: 05004313001 sr_no_br_cl: 05004313001 sr_cl: WERA05004313001 sr_dash: sold: 487.928 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 11 Product Range Wera Kraftform n: WERA Kraftform 2Go 300 screwdriver set 11-piece - 05004313001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 11 Kraftform screwdrivers; with Take it easy Tool finder; in the Wera 2go 4 quiver; comes with an adjustable partition element for individual sectioning. Lasertip tips for more secure fit in the screw head Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for docking with the Wera 2go system. Take it easy tool finder: colour coding according to profile and size 11 Kraftform screwdrivers, Series 300 for cross recess screws Phillips and Pozidriv, TORX® and slotted screws. Take it easy tool finder: colour coding according to profile and size stamp.1 dimensionally stable and robust Tool Quiver, equipped with handle for the storage and transport of tools; high resistance against cuts and stabs; comes with hook and loop fastener zone for docking with the Wera 2go system and includes 1 variably adjustable hook and loop fastener partition for a division into as many as 5 sections. Features and benefits Wera 2go 4 Tool Quiver The large set-down area improves the stability of the Tool Quiver. Its large handle means that the quiver can be easily transported or simply hung up at the workplace. The robust and dimensionally stable material is very resistant against cuts and stabs. The tools carried are protected against damage and moisture. This enhances the service life of the tool box. Thanks to its hook and loop fastener zone, the Tool Quiver can be docked with the Wera 2go 1 tool carrier and with the Wera 2go 2 tool container. The variably adjustable hook and loop fastener partition in the Tool Quiver ensures neat and tidy arrangement of the tools. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. Colour coding according to profile and size stamp. This enables faster and more reliable selection of the correct tool from the tool case. ds: dsc: Scope of delivery Kraftform 2go 300, 11 pieces 1x Wera 2go 4 Tool Quiver: 165 x 105 mm 2x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 5x 367 Screwdriver for TORX® screws: TX 10x80 mm, TX 15x80 mm, TX 20x100 mm, TX 25x100 mm, TX 30x115 mm 2x 334 SK Screwdriver for slotted screws: 0.8x4.5x90 mm, 1.2x7x125 mm kts: screwdriver set 11-piece kpn: Kraftform 2Go 300 kpn_dash: kpn_clear: Kraftform2Go300 bkpn: WERA Kraftform 2Go 300 bkpn_clear: WERA Kraftform2Go300 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05004313001 sr_ns: WERA05004313001
r: 02102794 p: 11.59 pid: 44416 b: WERA q: 0 st: lt: 11 ean: 4013288102591 sr: WERA 05059896001 sr_no_br: 05059896001 sr_no_br_cl: 05059896001 sr_cl: WERA05059896001 sr_dash: sold: 486.78 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv/Slotted Connection size (bit) 1/4" VDE approved No Bit tip SL/PZ1 n: WERA 855/4 PZ/S bit, 1 x 70 mm - 05059896001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with combination profile slotted and Pozidriv*, particularly for jobs on terminal blocks, fuse boxes, switches and relays. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. For PlusMinus screws (combination profile Pozidriv/slotted) Also for jobs on terminal blocks, fuse boxes, switches and relays Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 4) Application PlusMinus (Pozidriv/slotted) screws Drive 1/4" hexagon suitable for DIN ISO 1173-F 6.3 bit holders Design PlusMinus (Pozidriv/slotted), tough, ideal for electrical component adjustment jobs e.g. in sheet steel or metal Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/4 PZ/S PlusMinus bits, # 1 x 70 mm kts: bit, # 1 x 70 mm kpn: 855/4 PZ/S kpn_dash: kpn_clear: 8554PZS bkpn: WERA 855/4 PZ/S bkpn_clear: WERA 8554PZS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059896001 sr_ns: WERA05059896001
r: 02829029 p: 53.677 pid: 42626 b: WERA q: 0 st: lt: 8 ean: 4013288138514 sr: WERA 05072447001 sr_no_br: 05072447001 sr_no_br_cl: 05072447001 sr_cl: WERA05072447001 sr_dash: sold: 483.093 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 15 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T15 Number per box 100 n: WERA 867/1 TORX DIY 100 SiS bits, TX 15 x 25 mm (100 pcs) - 05072447001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for recessed TORX® screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design For universal use Features and benefits ds: dsc: Scope of delivery 867/1 TORX® DIY 100, TX 15 x 25 mm, 100 pieces 100x 867/1 TORX® bits: TX 15 x 25 mm kts: bits, TX 15 x 25 mm (100 pcs) kpn: 867/1 TORX DIY 100 SiS kpn_dash: kpn_clear: 8671TORXDIY100SiS bkpn: WERA 867/1 TORX DIY 100 SiS bkpn_clear: WERA 8671TORXDIY100SiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072447001 sr_ns: WERA05072447001
r: 87992988 p: 18.512 pid: 71581 b: WERA q: 0 st: lt: 15 ean: 4013288041418 sr: WERA 05028160001 sr_no_br: 05028160001 sr_no_br_cl: 05028160001 sr_cl: WERA05028160001 sr_dash: sold: 481.312 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 392 bit holder 1/4" with flexible blade, 1/4" x 177 mm - 05028160001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description High quality bit holder with flexible shaft by Wera. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Comes with quick-release chuck for rapid bit change and hexagonal anti-roll feature that prevents any rolling away. Suitable for the insertion of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3. Bit holder with flexible shaft and quick-release chuck Multi-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Flexible, circular blade For bits with 1/4" hexagon head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 hexagon bits and Wera Series 1 Design Wera quick-release chuck Handle Kraftform with non-roll feature, multi-component Features and benefits Screwdriving can also be achieved "around the corner" with the screwdriver 392. The flexible shaft allows unfavourably-positioned screw fastenings to be reached. The ideal tool for difficult-to-access screwdriving applications e.g. in the engine compartment of a car. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 392 Bitholding screwdriver with flexible shaft, 1/4" x 177 mm kts: bit holder 1/4" with flexible blade, 1/4" x 177 mm kpn: 392 kpn_dash: kpn_clear: 392 bkpn: WERA 392 bkpn_clear: WERA 392 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05028160001 sr_ns: WERA05028160001
